ENGLISH
4. CONNECTING SPEAKERS
• You can connect up to four pairs of speakers to this receiver
and select the various combinations of speakers according to
your tastes.
• The speakers C and D can be installed in the main room as
the speakers A and B can or in the another room (ROOM2)
for ROOM2 playback. (For details, refer to "ROOM2
PLAYBACK" on page 24.)
• Be sure to connect speakers firmly and correctly according to
the channel (left and right) and the polarity (+ and -).
• If the connections are faulty, no sound will be heard from the
speakers, and if the polarity of the speaker connection is
incorrect, the sound will be unnatural and lack bass.
■Notes :
• For safe amplifier operation, use the speakers with
impedance of over 8Ω when you connect a pair terminals of
SPEAKER A and B terminals or/and a pair terminals of
SPEAKER C and D terminals and use the speakers with
impedance of over 16Ω when you connect both SPEAKER A
and B terminals or/and both SPEAKER C and D terminals.
• Do not let the bare speaker wires touch each other or any
metal part of this receiver. This could damage this receiver
and/or the speakers.
6
5. CONNECTING PC FOR UPGRADES
• This receiver incorporates RS-232C terminal that may be
used in the future to update the operating software so that it
will be able to support new digital audio formats, external
control by using an external device and the like.
■Notes:
• Programming for upgrades and external control requires
specialized programming knowledge and for that reason we
recommend that it only be done by qualified installers. For
more information on future upgrades and external control,
visit the Sherwood web site at www.sherwoodamerica.com or
contact your dealer.
• Do not disconnect the connection cable while updating the
operating software, etc.
Should this happen, it may be result in malfunction or cause
damage to the unit.
