LISTENING TO RADIO BROADCASTS
Auto tuning
• Each time this button is pressed, the mode
changes as follows:
Tuning mode : “PRESET” goes off.
Preset mode : “PRESET” lights up.
• The tuner will now search until a station of
sufficient strength has been found. The display
shows the tuned frequency and “TUNED”.
• If the station found is not the desired one, simply
repeat this operation.
• Weak stations are skipped during auto tuning.
• Each time this button is pressed, the band is
changed to FM or AM.
12
•“BAL” and the balance level is displayed for 3
seconds.
•If the balance display disappears, start from the
step 11 again.
Note:
•In general, the balance level is set to 0.
Adjusting the sound volume balance
11. Enter the balance mode.
12. Adjust the sound volume balance between the left and right speakers.
1. Select the tuner and then the desired band.
2. Select the tuning mode.
3
. Press the TUNING/PRESET UP (
▲/+) or DOWN (▼/-) button for more than 0.5 second.