49
ENGLISH
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired input source, then press
the ENTER button.
1
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired item.
2
• This menu allows you to make the various settings
depending on how to use the input sources connected to
this receiver.
SETTING THE INPUT SETUP
When selecting the items other than NAME
• You should assign the connected DIGITAL INs to the desired of CD, AUX and VIDEO 1 ~ VIDEO 5.
(For details, refer to "CONNECTING DIGITAL INS and OUT" on page 7.)
• You can select the desired of OPT 1 ~ OPT 5, COAX1 ~ COAX 2 and ANAlog.
■Note :
• In such a case that a DIGITAL IN is assigned to two input sources or more, when these input sources are
selected, the digital audio signals can be heard from the same DIGITAL IN.
When selecting the DIGITAL AUDIO
Example: When selecting the VIDEO 1
Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the selected item as desired.
3
■Note :
• Depending on the input source, some items other than
DC TRIGGER cannot be selected.
• You should assign the connected HDMI INs to the desired of VIDEO 1 ~ VIDEO 5.
(For details, refer to "CONNECTING VIDEO COMPONENTS" on pages 5 ~ 6.)
• You can select HDMI 1 or HDMI 2.
■Note :
• In such a case that a HDMI IN is assigned to two input sources or more, when these input sources are
selected, the uncompressed digital video signals and audio signals can be output from the MONITOR HDMI
OUT of this receiver without passing through any circuits as they were input into the same HDMI IN.
When selecting the VIDEO ASSIGN 1
