9
2. With the dust cap securely in place, rince the first and second
stage in clean fresh water. DO NOT purge the regulator before
or during rinsing since this may introduce water into the second
stage and the low pressure hose. Shake or blow all excess water
from the second stage and allow the entire regulator to air dry
before storing.
3. Store the regulator in a clean bag or storage box, away from
sunlight, excessive heat and humidity.
4.0 SHERWOOD SCUBA
LIMITED WARRANTY INFORMATION
4.1 TWO YEAR LIMITED WARRANTY
1. Sherwood warrants that Sherwood Scuba regulators purchased
from authorized Sherwood Scuba dealers shall be free from
defects in materials and workmanship for twenty-four (24)
months from that date of original purchase. Under this limited
warranty, Sherwood will either repair or replace, at its sole
NOTE
A tiny stream of bubbles escaping from a small black valve
on the first stage indicates that the Dry Air Bleed System
is working. The amount of air used is negligible (13-25
cc/min.). Check the system periodically, particularly after
servicing, to ensure that there is some air escaping from
the black one-way bleed valve. If no air is escaping from
the valve when air pressure is applied to the first stage,
you should have the regulator inspected by your authorized
Sherwood Scuba dealer.
