145010
1
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
LC-32LE700E LC-32LE700S
LC-40LE700E LC-40LE700S
LC-46LE700E LC-46LE700S
LC-52LE700E LC-52LE700S
LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISEUR COULEUR À ÉCRAN
CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD
TELEVISOR DE CRISTAL LÍQUIDO
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO
MANUAL DE OPERAÇÃO
SHARP ELECTRONICS (Europe) GmbH
Sonninstraße 3, D-20097 Hamburg
SHARP CORPORATION
http://www.sharp-eu.com
Printed in Poland
Gedruckt in Polen
Imprimé en Pologne
Stampato in Polonia
Gedrukt in Polen
Impreso en Polonia
Impresso na Polónia
TINS-E281WJN1
09P10-PL-NG
PIN
LC-32LE700E/LC-32LE700S/
LC-40LE700E/LC-40LE700S/
LC-46LE700E/LC-46LE700S/
LC-52LE700E/LC-52LE700S
E281WJN1
OPERATION MANUAL/BEDIENUNGSANLEITUNG/MODE D’EMPLOI/MANUALE DI
ISTRUZIONI/GEBRUIKSAANWIJZING/MANUAL DE MANEJO/MANUAL DE OPERAÇÃO
1
LC-32LX700E LC-40LX700E LC-46LX700E
LC-32LU700E LC-32LU700S LC-40LU700E LC-40LU700S LC-46LU700E LC-46LU700S
LC-32LE705E LC-32LE705S LC-40LE705E LC-40LE705S
LC-46LE705E LC-46LE705S LC-52LE705E LC-52LE705S
LC-32LX705E LC-40LX705E LC-46LX705E
LC-32LU705E LC-32LU705S LC-40LU705E LC-40LU705S LC-46LU705E LC-46LU705S
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
ESPAÑOL
PORTUGUÊS
Cover_GB01_LE705E.indd 1Cover_GB01_LE705E.indd 1 2009/10/09 13:54:082009/10/09 13:54:08
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A
fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or
ASA
and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied,
cut off the mains plug and fit an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and
disposed of in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a
serious electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this product may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.
The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin
plug.
Before replacing the plug cover make sure that:
If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.
The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
52
o
/46
o
40
o
/32
o
(
1238.0
)
/
[
1099.0
]
(
1238,0
)
/
[
1099,0
]
(
964.0
)
/
[
767.0
]
(
964,0
)
/
[
767,0
]
470.0
470,0
335.0
335,0
400.0
400,0
400.0
400,0
175.0
175,0
(
1157.0
)
/
[
1023.4
]
(
1157,0
)
/
[
1023,4
]
(
817,0
)
/
[
740,0
]
(
817.0
)
/
[
740.0
]
(
765.0
)
/
[
688.0
]
(
765,0
)
/
[
688,0
]
(
664,0
)
/
[
554,0
]
(
664.0
)
/
[
554.0
]
(
300,0
)
/
[
200,0
]
(
300.0
)
/
[
200.0
]
(
300,0
)
/
[
200,0
]
(
300.0
)
/
[
200.0
]
(
612.0
)
/
[
502.0
]
(
612,0
)
/
[
502,0
]
[
575.6
]
[
575,6
]
(
651,0
)
(
651.0
)
[
415.0
]
[
415,0
]
(
452,0
)
(
452.0
)
[
125.7
]
[
125,7
]
(
125,5
)
(
125.5
)
[
93.2
]
[
93,2
]
(
95,0
)
(
95.0
)
[
77.9
]
[
77,9
]
(
93,0
)
(
93.0
)
[
91.9
]
[
91,9
]
(
93,1
)
(
93.1
)
[
240.0
]
[
240,0
]
(
270,0
)
(
270.0
)
[
390.0
]
[
390,0
]
(
420,0
)
(
420.0
)
(
887.8
)
/
[
700.0
]
(
887,8
)
/
[
700,0
]
[
394.5
]
[
394,5
]
(
500,4
)
(
500.4
)
[
321.0
]
[
321,0
]
(
377,0
)
(
377.0
)
[
135.0
]
[
135,0
]
(
170,0
)
(
170.0
)
( )
52o
[ ]
46o
52o/46o
( )
40o
[ ]
32o
Cover_GB02_LE705E.indd 1Cover_GB02_LE705E.indd 1 2009/10/09 13:54:432009/10/09 13:54:43
1
OPERATION MANUAL
ENGLISH
The illustrations and the OSD in this operation manual are for
explanation purposes and may vary slightly from the actual
operations.
The examples used throughout this manual are based on the
LC-46LE700E model.
LC-32LE700E, LC-32LE700S, LC-32LX700E, LC-32LU700E,
LC-32LU700S, LC-40LE700E, LC-40LE700S, LC-40LX700E,
LC-40LU700E, LC-40LU700S, LC-46LE700E, LC-46LE700S,
LC-46LX700E, LC-46LU700E, LC-46LU700S, LC-52LE700E,
LC-52LE700S, LC-32LE705E, LC-32LE705S, LC-32LX705E,
LC-32LU705E, LC-32LU705S, LC-40LE705E, LC-40LE705S,
LC-40LX705E, LC-40LU705E, LC-40LU705S, LC-46LE705E,
LC-46LE705S, LC-46LX705E, LC-46LU705E, LC-46LU705S,
LC-52LE705E and LC-52LE705S models are compatible with
H.264 (MPEG4 H.264, MPEG4 AVC, MPEG4 AVC/H.264)
compressed broadcasts.
Only the LC-32LE705E, LC-32LE705S, LC-40LE705E, LC-
40LE705S, LC-46LE705E, LC-46LE705S, LC-32LX705E,
LC-40LX705E, LC-46LX705E, LC-32LU705E, LC-32LU705S,
LC-40LU705E, LC-40LU705S, LC-46LU705E and LC-
46LU705S models are compatible with the Common Interface
(CI) standard as well as the enhanced security Common
Interface Plus (CI+) standard.
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour
TV product. To ensure safety and many years of trouble-
free operation of your product, please read Important
safety precautions carefully before using this product.
Trademarks
“HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
The “HD TV 1080p” Logo is a trademark of EICTA.
The DVB logo is the registered trademark of the Digital
Video Broadcasting—DVB—project.
LC_ LCFONT+ and LC logo mark
are registered trademarks of SHARP Corporation. This
product is embedded with LC Font technology, which was
developed by SHARP Corporation for clearly displaying
easy-to-read characters on an LCD screen. However, other
non-LCD fonts are used for displaying some screen pages.
ENGLISH
Introduction ................................................................. 2
Important safety precautions ................................. 2
Remote control unit .............................................. 3
TV (front view) ....................................................... 4
TV (rear view) ........................................................ 4
Preparation.................................................................. 5
Supplied accessories ............................................ 5
Attaching the stand unit ........................................ 5
Inserting the batteries............................................ 6
Using the remote control unit ................................ 6
Quick guide ................................................................. 7
Initial installation overview...................................... 7
Before turning on the power ................................. 8
Initial auto installation ............................................ 9
Inserting the CA card into the CI module ............. 11
Watching TV .............................................................. 12
Daily operation .................................................... 12
EPG .................................................................... 13
Teletext ............................................................... 15
Connecting external devices ................................... 16
Video connections .............................................. 16
Audio connections .............................................. 18
AQUOS LINK ............................................................. 19
Controlling HDMI devices using AQUOS LINK ..... 19
AQUOS LINK connection .................................... 19
AQUOS LINK setup ............................................ 20
Operating an AQUOS LINK device ...................... 21
Menu operation......................................................... 22
What is the MENU? ............................................ 22
Basic adjustment ...................................................... 23
Picture settings ................................................... 23
Audio settings ..................................................... 25
Power save settings ............................................ 26
Channel settings ................................................. 27
Password/Parental lock settings ......................... 30
Other basic adjustments ..................................... 30
Useful viewing functions .......................................... 31
Selecting the picture size .................................... 31
Language settings .............................................. 32
Display settings ................................................... 33
Other useful features ............................................... 34
Setting when using external devices ................... 34
Additional features .............................................. 34
Connecting a USB device ................................... 35
USB Photo viewer/Music player .......................... 35
Connecting a PC ....................................................... 37
Connecting a PC ................................................ 37
Displaying a PC image on the screen .................. 37
RS-232C port specifications ............................... 39
Appendix ................................................................... 41
Troubleshooting .................................................. 41
Updating your TV via DVB-T ............................... 42
Reset .................................................................. 42
Identification ....................................................... 42
Updating your TV via USB .................................. 43
Specifications ..................................................... 44
Environmental specifications ............................... 46
End of life disposal .............................................. 48
LC-LE705E_GB.indd 1LC-LE705E_GB.indd 1 2009/10/09 14:12:482009/10/09 14:12:48
2
Important safety precautions
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use
liquid cleaners or aerosol cleaners.
Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean it.
Chemicals may cause damage or cracks in the cabinet of the TV.
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and
in a wet basement.
Do not place vases or any other water-filled containers on this product. The water may spill onto the product
causing fire or electric shock.
Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product
to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod,
bracket or table recommended by the manufacturer or sold with the product. When mounting the product on
a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the
manufacturer.
When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive
force and uneven floor surface can cause the product to fall from the cart.
Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or block
these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the
product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation
openings. This product is not designed for built-in installation; do not place the product in an enclosed place
such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are
followed.
The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or
impact applied. If the LCD panel is broken, be careful not to be injured by broken glass.
Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-
generating products (including amplifiers).
To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
Headphones—Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
Do not display a still picture for a long time, as this could cause an afterimage to remain.
There is power consumption always if main plug is connected.
Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous
conditions. Request a qualified person to perform servicing.
The LCD panel is a very high technology product, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of blue, green or
red. This is within product specifications and does not constitute a fault.
Precautions when transporting the TV
When transporting the TV, never carry it by holding onto the speakers. Be sure to always carry the TV by two people holding it with two
hands—one hand on each side of the TV.
Devices connected to the protective earthing of the building installation through the MAINS connection or through other devices with a
connection to protective earthing and to a television distribution system using coaxial cable, may in some circumstances create a fire
hazard. Connection to a television distribution system therefore has to be provided through a device providing electrical isolation within a
certain frequency range (galvanic isolator, see EN 60728-11).
NOTE
For requirements in Norway and Sweden, the requirements for isolation are also relevant for devices that can be connected to
television distribution systems.
Introduction
LC-LE705E_GB.indd 2LC-LE705E_GB.indd 2 2009/10/09 14:12:492009/10/09 14:12:49
3
Remote control unit
B (Standby/On)
(Page 12)
Buttons for useful operations
m (Teletext)
ATV: Display analogue teletext
(Page 15).
DTV: Select MHEG-5 and teletext
for DTV (Page 15).
k (Reveal hidden teletext)
(Page 15)
[ (Subtitle)
Switch subtitle languages on/off
(Pages 15 and 32).
3 (Freeze/Hold)
Press to freeze a moving image on
the screen.
Teletext: Stop updating teletext
pages automatically or release the
hold mode.
1 (Subpage)
(Page 15)
v (Top/Bottom/Full)
Set the area of magnification in
teletext mode (Page 15).
Numeric buttons 0_9
Set the channel.
Enter desired numbers.
Set the page in teletext mode.
When the five Nordic countries
(Sweden, Norway, Finland,
Denmark or Iceland) are selected
in the country setting from “Auto
installation” (page 27), DTV
services are four digits. When
another country is selected, DTV
services are three digits.
A (Flashback)
Press to return to the previously
selected channel or external input.
DTV
Press to access digital TV mode.
ATV
Press to access conventional
analogue TV mode.
2 (Sound mode)
Select a sound multiplex mode
(Page 12).
i+/- (Volume)
Increase/decrease TV volume.
e (Mute)
TV sound on/off.
1
2
3
4
5
6
7
8
9
15
16
17
18
19
20
21
22
23
24
25
4
3
2
5
6
7
8
9
10
11
12
13
14
1
f (WIDE MODE)
Select a wide mode (Pages 31
and 37).
#
Select a video setting (Page 24).
a/b/c/d (Cursor)
Select a desired item on the setting
screen.
;
Execute a command within the
“MENU” screen.
ATV/DTV: Display the programme
list when no other “MENU” screen
is running.
0
Q
W
>
Exit the “MENU” screen.
R/G/Y/B (Colour) buttons
The coloured buttons are
correspondingly used to select the
coloured items on the screen (e.g.,
EPG, MHEG-5, teletext).
b (INPUT SOURCE)
Select an input source (Page 12).
EPG
DTV: Display the EPG screen
(Pages 13_14).
RADIO
DTV: Switch between radio and
data mode.
When only data broadcasting
(no radio broadcasting) is
transmitted by DVB, the radio
broadcasting will be skipped.
P. INFO
Press to display programme
information which is transmitted
through digital video broadcasting in
the upper left corner of the screen
(DTV only).
:r/s
Select the TV channel.
p (Display information)
Press to display the station
information (channel number, signal,
etc.) in the upper right corner of the
screen (Page 33).
ECO (Standard/Advanced/Off)
Select “Energy save” setting (Page
26).
@
“MENU” screen on/off.
6 (Return)
Return to the previous “MENU”
screen.
SLEEP
Press to schedule a time for the TV
to automatically standby (Page 26).
AQUOS LINK buttons
If external equipment such as a
AQUOS BD player is connected via
HDMI cables and is AQUOS LINK
compatible, you can use these
AQUOS LINK buttons. See pages
19 and 21 for details.
E
R
T
Y
U
I
O
P
A
S
D
F
G
Introduction
LC-LE705E_GB.indd 3LC-LE705E_GB.indd 3 2009/10/09 14:12:502009/10/09 14:12:50
4
TV (front view)
2 3 45
6
1
7
8
9
10
Blue illumination LED
B (Standby/On indicator)
OPC indicator
Remote control sensor
OPC sensor
a (Power button)
@ (Menu button)
b (Input source button)
:r/s (Programme [channel]
buttons)
i+/- (Volume buttons)
1
2
3
4
5
6
7
8
9
10
TV (rear view)
1
2
6
8
11
12
14
13
15
16 17 18 19
9
10
3
4
5
7
*1
*2
COMMON INTERFACE slot
USB terminal
HDMI 4 (HDMI) terminal
EXT 9 (VIDEO/AUDIO) terminals
Headphones
AC INPUT terminal
MAIN POWER switch
HDMI 3 (HDMI) terminal
HDMI 1 (HDMI) terminal
EXT 4 (ANALOGUE RGB (PC))
terminal
Antenna terminal
HDMI 2 (HDMI) terminal
HDMI 2/PC AUDIO (R/L) jack
DIGITAL AUDIO OUTPUT
terminal
RS-232C terminal
EXT 3 (COMPONENT/AUDIO)
terminals
EXT 1 (RGB) terminal
EXT 2 (AV) terminal
OUTPUT (AUDIO) terminals
WARNING
Excessive sound pressure from earphones
and headphones can cause hearing loss.
Do not set the volume at a high level.
Hearing experts advise against extended
listening at high volume levels.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
When the MAIN POWER switch is turned off (a), the amount of electric power consumed will be reduced to 0.01 W or less. However,
unlike when unplugging the AC cord, the power is not completely disconnected.
The HDMI 2 and EXT 4 terminals can both use the same audio input terminal (HDMI 2/PC AUDIO (R/L)). However, the proper item must
be selected in the “PC audio select” menu (refer to page 25 for details).
I
J
Introduction
LC-LE705E_GB.indd 4LC-LE705E_GB.indd 4 2009/10/09 14:12:502009/10/09 14:12:50
5
Supplied accessories
Remote control unit ( x 1) AC cord ( x 1) Cable clamp ( x 1) Stand unit ( x 1)
Product shape varies in
some countries.
For 32 inch models
For 40/46/52 inch models
Pages 3 and 6 Page 8 Page 8 Page 5
Operation manual (this publication)
“AAA” size zinc-carbon battery ( x 2) ... Page 6
Attaching the stand unit
Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.
CAUTION
Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Confirm that there are eight screws with the
stand unit.
Models Screws
32 inch models
AB
40/46/52 inch models
CD
Attach the supporting post for the stand unit
onto the base using the four screws with the
screw driver as shown.
*
Supporting
post
32 inch models: Use Screws B in the table in step 1.
40/46/52 inch models: Use Screws D in the table in step 1.
1
2
*
*
Inserting the stand.
Insert the stand into the openings on the
bottom of the TV (hold the stand so it will not
drop from the edge of the base area).
Insert and tighten the four screws into the four
holes on the rear of the TV.
1
1
2 2
Soft cushion
32 inch models: Use Screws A in the table in step 1.
40/46/52 inch models: Use Screws C in the table in step 1.
NOTE
To detach the stand unit, perform the steps in reverse order.
A screw driver is not supplied with this product.
The stand base is made of glass. Therefore, be careful not to
drop the stand base or apply pressure to it.
Do not place heavy objects on the stand base.
3
1
2
*
*
Preparation
LC-LE705E_GB.indd 5LC-LE705E_GB.indd 5 2009/10/09 14:12:512009/10/09 14:12:51
6
Inserting the batteries
Before using the TV for the first time, insert two supplied “AAA” size zinc-carbon batteries. When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
Open the battery cover.
Insert two supplied “AAA” size zinc-carbon
batteries.
Place batteries with their terminals corresponding to the (e)
and (f) indications in the battery compartment.
Close the battery cover.
1
2
3
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Do not mix batteries of different types. Different types of batteries have different characteristics.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old
batteries.
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any chemical leakage,
wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
When replacing the batteries, use zinc-carbon batteries instead of alkaline ones.
Note on disposing batteries
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household rubbish.
Deposit any used batteries free of charge into the designated collection containers set up at commercial businesses.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control unit
and sensor may prevent proper operation.
5 m
Remote control sensor
Cautions regarding the remote control unit
Do not expose the remote control unit to shock. In addition, do not expose the remote
control unit to liquids, and do not place in an area with high humidity.
Do not install or place the remote control unit under direct sunlight. The heat may cause
deformation of the unit.
The remote control unit may not work properly if the remote control sensor of the TV is
under direct sunlight or strong lighting. In such cases, change the angle of the lighting or
the TV, or operate the remote control unit closer to the remote control sensor.
Preparation
LC-LE705E_GB.indd 6LC-LE705E_GB.indd 6 2009/10/09 14:12:532009/10/09 14:12:53
7
Initial installation overview
Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending
on your TV installation and connection.
Preparation
Connect an antenna cable to the
antenna terminal (Page 8).
If necessary, insert a CA
card into the CI slot to watch
scrambled broadcasts (Page 11).
Connect the AC cord to the TV
(Page 8).
Product shape varies in some
countries.
Run the
initial
settings
Turn on (;) the MAIN POWER
switch on the left side of the TV
(Page 4).
The factory default for the MAIN
POWER switch is set to on (;).
Turn on the power using a on
the TV (Page 12).
Run the initial auto installation
(Page 9).
Language setting
Home/Store setting
HOME
STORE
Country setting
Austria
Finland
Greece
Channel search
setting
Digital search
Analogue search
Start searching
channels
Watch TV
Congratulations!
Now you can watch TV.
If necessary, adjust the antenna
to attain maximum signal
reception (Page 11).
Connect external
devices
Connect external devices
such as a DVD player/
recorder as instructed (Pages
16_18).
Connect external audio
devices such as speakers/
amplifier as instructed (Page
18).
Quick guide
LC-LE705E_GB.indd 7LC-LE705E_GB.indd 7 2009/10/09 14:12:542009/10/09 14:12:54
8
Before turning on the power
2
*
1
Cable clamp (bundle the cables with the clamp)
Standard DIN45325 plug (IEC 169-2) 75 q coaxial cable
Turn on (;) the MAIN POWER switch on the left side of the TV.
AC cord (product shape varies in some countries)
The AC cord is supplied either with a ferrite core or without a ferrite core. Neither type
causes unnecessary electrical wave emissions or interference.
*
Place the TV close to the AC outlet,
and keep the power plug within
reach.
Supplying power to the antenna
You must supply power to the antenna in order to receive digitally/terrestrially broadcast stations after connecting
the antenna cable to the antenna terminal on the rear of the TV.
Press @ and the “MENU” screen displays.
Press c/d to select “Setup”.
Press a/b to select “Antenna setup-DIGITAL”, and then press ;.
Press a/b to select “Supply voltage”, and then press ;.
Press c/d to select “On”, and then press ;.
1
2
3
4
5
Mounting the TV on a wall
This TV should be mounted on a wall only with the wall mount bracket and attachment* available from SHARP (Page 46).
The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that
results in accident or injury.
You can ask qualified service personnel about using an optional bracket and attachment* to mount the TV to a wall.
When you mount the TV on a wall, you should attach the supporting post.
Only for 40 inch models.
*
Quick guide
LC-LE705E_GB.indd 8LC-LE705E_GB.indd 8 2009/10/09 14:12:572009/10/09 14:12:57
9
Initial auto installation
When the TV is powered on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings one
after another.
Confirm the following before turning on
the power
Is the antenna cable connected?
Is the AC cord plugged in?
Is the MAIN POWER switch turned on (;)?
E
E
E
Press a on the TV.
The initial auto installation wizard appears.
Setting the OSD language.
Press a/b/c/d to select the desired language,
and then press ;.
Selecting the location of the TV.
HOME
STORE
Press c/d to select where you will use this TV,
and then press ;.
HOME: “STANDARD” will be the default value for the “AV
MODE” setting.
STORE: “DYNAMIC (Fixed)” will be the default value for
the “AV MODE” setting. If the “AV MODE” is changed,
the TV will automatically switch back to “DYNAMIC
(Fixed)” when there is no signal input from the TV or
remote control unit for 30 minutes.
A demonstration image will be displayed after initial auto
installation is completed. If you have chosen “STORE” by
mistake, go to “Setup” > “Reset” > select “HOME” again.
Setting the country.
Austria
Finland
Greece
Press a/b/c/d to select your country or area,
and then press ;.
This setting screen only appears during the first
installation.
1
2
3
4
NOTE
If you set “Sweden” in the country setting, you can select
the cable provider “ComHem”. Refer to the H mark
in the following steps or instructions about the settings for
“ComHem”.
Starting channel search.
Digital search
Analogue search
Press c/d to select “Digital search” or “Analogue
search”, and then press ;.
To watch both analogue broadcasts and digital
broadcasts, you should perform the auto installation
setting for each format (Page 27).
If you want to search for more broadcasts, execute
“Additional search” from the “Programme setup” menu
(Pages 27_29).
NOTE
If you turn off the power on the TV while performing a channel
search, the initial auto installation wizard will not appear. The
auto installation function allows you to execute the installation
again from the “Setup” menu (Page 27).
The initial auto installation wizard will abort if you leave the TV
unattended for 30 minutes before searching for channels.
After initial auto installation is completed, the default PIN is
automatically set to “1234”. To change the PIN setting, refer to
Password/Parental lock settings (Page 30). To clear the PIN
setting (PIN input will no longer be needed), refer to CLEARING
THE PIN (Page 41).
When “Italy” is selected in the country setting, the default age
restriction value is set to 18.
Digital broadcast setting
Press c/d to select “Terrestrial” or “Cable”,
and then press ;.
Terrestrial
Cable
H
When you set “Sweden” in the country setting and select
“Cable” for the searching format, you can select the
cable provider “ComHem”.
Searching for terrestrial broadcasts
The TV searches for, sorts and stores all the
receivable TV stations according to their
settings and the connected antenna.
To abort the initial auto installation in progress, press 6.
5
E
Quick guide
LC-LE705E_GB.indd 9LC-LE705E_GB.indd 9 2009/10/09 14:12:572009/10/09 14:12:57
10
Quick guide
Searching for cable broadcasts
To change each item to the appropriate
settings:
Press a/b to select the menu, and then
press ;.
Scrambled stations [Yes]
[Channel]
[None]
Search method
Start frequency
Network ID
Symbol rate 1
Symbol rate 2
QAM modulation 1
QAM modulation 2
Reset
Search start
Press a/b/c/d or 0_9 to select or input
the appropriate item/value, and then press
;.
Press a/b to select “Search start”, and then
press ;.
The TV searches for, sorts and stores all
the receivable TV stations according to their
settings and the connected antenna.
To abort the initial auto installation in progress, press 6.
H
The “Scrambled stations” menu and the “Search method”
menu are not displayed on the screen as each menu item is
fixed.
The value of “Start frequency” and “Network ID” should be set
to the value specified by the cable provider.
E
1
2
3
4
Menu Description Selectable items
Scrambled
stations
Specifies if you
need to add pay-TV
services.
Yes, No
Search
method
Specifies how you
search channels.
Channel: Extracts all
of information from a
channel (quick, but
needs corresponding
TV stations).
Frequency: Checks
every frequency in
range (slow).
Start
frequency
From 47.0_858.0
MHz
Network ID
Specifies the network.
Set this to register
only the specified
network ID without
registering any special
services.
None, 0_65535
Symbol
rate 1*
The symbol rates
are specified by the
cable provider. Input
the value received for
CATV.
1000_9000
Symbol
rate 2*
The symbol rates
are specified by the
cable provider. Input
the value received for
CATV.
1000_9000
QAM
modulation 1
16, 32, 64, 128, 256
QAM
modulation 2
None, 16, 32, 64,
128, 256
Set up “Symbol rate 2” if the cable provider uses several
symbol rates.
H
When you set “Sweden” in the country setting and select
“Cable” for the searching format, you can select the cable
provider “ComHem”. Follow the screen prompts.
Analogue broadcast setting
The TV searches for, sorts and stores all the
receivable TV stations according to their
settings and the connected antenna.
To abort the initial auto installation in progress, press 6.
*
LC-LE705E_GB.indd 10LC-LE705E_GB.indd 10 2009/10/09 14:12:582009/10/09 14:12:58
11
Quick guide
Checking signal strength and
channel strength (DVB-T/C)
If you install a DVB-T/C antenna for the first time or
relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking the
antenna setup screen.
Go to “MENU” > “Setup” > “Antenna setup-
DIGITAL”.
Checking signal strength
Press a/b to select “Signal strength”, and
then press ;.
Supply voltage
CH no.
Current Max.
Signal strength
Signal strength
Channel strength
Current Max.
Quality
Checking channel strength
Press a/b to select “Channel strength”, and
then press ;.
You can input a specified frequency band using the 0_9
numeric buttons.
E
E
Channel strength of DVB-T
Supply voltage
CH no.
Current Max.
Signal strength
MHz
Signal strength
Channel strength
Current Max.
Quality
Channel strength of DVB-C
Supply voltage
Current
Max.
Signal strength
MHz
Signal strength
Frequency
Symbol rate
QAM modulation
Channel strength
Current Max.
Quality
Position and align the antenna so that
the maximum possible values for “Signal
strength” and “Quality” are obtained.
NOTE
The values of “Signal strength” and “Quality” indicate when to
check the appropriate alignment of the antenna.
4
Inserting the CA card into the CI module
In order to receive coded digital stations, a common interface module (CI module) and a CA card must be inserted in the
CI slot of the TV.
Carefully insert the CI module in
the CI slot with the contact side
forward.
The logo on the CI module must
be facing outward from the rear
of the TV.
1
2
Checking CI module information
Go to “MENU” > “Digital setup” > “CI menu”.
This menu is only available for digital stations.
The content of this menu depends on the provider of the CI module.
Module
General information on CI module displays.
Menu
Adjustment parameters of each CA card displays.
Enquiry
You can input numerical values such as passwords here.
NOTE
Only the LC-32LE705E, LC-32LE705S, LC-40LE705E, LC-40LE705S, LC-46LE705E, LC-46LE705S, LC-32LX705E, LC-40LX705E, LC-
46LX705E, LC-32LU705E, LC-32LU705S, LC-40LU705E, LC-40LU705S, LC-46LU705E and LC-46LU705S models are compatible with
the Common Interface (CI) standard as well as the enhanced security Common Interface Plus (CI+) standard.
It takes about 30 seconds to certify the license key when you insert a CA card into the CI+ compatible CI module for the first time. This
process may fail when there is no antenna input or you have never run “Auto installation”.
The CI+ compatible CI module sometimes upgrades its firmware. You may not receive any TV images before upgrading. You can only use
the power button during upgrading.
The CI+ compatible CI module does not allow you to output any copy protected programmes using monitor out. In this case, the copy
protect icon* is shown in the programme information when P. INFO is pressed.
Protect icon: X
If the TV displays an update confirmation message for the CA card while receiving CI+ compatible broadcasts, follow the screen prompts.
Make sure that the CI module is properly inserted.
*
LC-LE705E_GB.indd 11LC-LE705E_GB.indd 11 2009/10/09 14:12:582009/10/09 14:12:58
18
YPB
(
CB)
PR
(
CR)
Component connection
Example of connectable devices
VCR
DVD player/recorder
E
E
You will enjoy accurate colour reproduction and high
quality images through the EXT 3 terminal when
connecting a DVD player/recorder or other device.
YPB
(CB)
LRP
R
(CR)
COMPONENTAUDIO
Audio cable Component cable
VIDEO connection
Example of connectable devices
VCR
DVD player/recorder
Game console
Camcorder
E
E
E
E
You can use the EXT 9 terminal when connecting to a
game console, camcorder, a DVD player/recorder or
other device.
AV cable
Audio connections
Speaker/amplifier connection
Connect an amplifier with external speakers as shown
below.
Connecting an amplifier with digital/
analogue audio inputs
DIGITAL AUDIO IN
AUX1 IN
LR
Optical audio cable (for digital audio input)
Audio cable (for analogue audio input)
After connecting
Digital audio output setting
After connecting an amplifier with digital audio
input and external speakers as shown, you should
set an audio output format compatible with
the programme you are watching or the device
connected.
Go to “MENU” > “Option” > “Digital
audio output” > select “PCM” or “Dolby
Digital”.
NOTE
When set to “Dolby Digital”, Dolby Digital is output when
the Dolby Digital or Dolby Digital Plus audio formats are
received. When set to “PCM”, PCM is output no matter
what audio formats are received.
E
E
Connecting external devices
LC-LE705E_GB.indd 18LC-LE705E_GB.indd 18 2009/10/09 14:13:032009/10/09 14:13:03
19
Controlling HDMI devices using AQUOS LINK
What is AQUOS LINK?
Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate
compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/
recorder) using a single remote control unit.
NOTE
AQUOS LINK-compatible AQUOS AUDIO speaker system and AQUOS recorder are scheduled
to be on sale after the release of this TV.
What you can do with AQUOS LINK
One touch recording (DTV only)
You do not have to search for the remote control unit of your recording device. Press
the REC E or REC STOP H buttons inside the flip cover to start/stop recording
what you see on the recorder.
One touch play
When the TV is in standby mode, it will automatically turn on and play back the
image from the HDMI source.
Single remote control operation
AQUOS LINK automatically recognises connected HDMI devices and you can
control the TV and the devices as if using a universal remote control unit.
Operating title list of external devices
In addition to displaying the TV’s own timer list (Page 14), you can also call up
the external player’s top menu or AQUOS BD player’s/AQUOS recorder’s title list
provided that the devices support AQUOS LINK.
Multiple control of HDMI devices
You can select which HDMI device to operate using the < button.
NOTE
When you use AQUOS LINK, make sure to use a certified HDMI cable.
Point the remote control unit toward the TV, not to the connected HDMI device.
Video noise may occur depending on the type of HDMI cable used. Make sure to use a certified
HDMI cable.
Up to three HDMI recording devices, one AV amplifier and two players can be connected using
this system.
These operations affect the HDMI device selected as the current external source. If the device
does not operate, turn on the device and select the appropriate external source using b.
When you insert/remove HDMI cables or change connections, turn on all connected HDMI
devices before turning on the TV. Confirm that picture and audio are correctly output by
selecting “HDMI 1”, “HDMI 2”, “HDMI 3” or “HDMI 4” from the “INPUT SOURCE” menu.
E
E
AQUOS LINK connection
First connect the AQUOS AUDIO speaker system or an AQUOS BD player/AQUOS recorder that supports the HDMI
CEC protocol.
NOTE
Refer to the operation manual of the device to be connected for further details.
After unplugging connection cables or changing the connection pattern, turn on the power of the TV after all relevant devices’ power
have been turned on. Change the external input source by pressing b, select the appropriate external source and verify the audiovisual
output.
The cables illustrated in the following explanation are commercially available items.
AQUOS LINK
LC-LE705E_GB.indd 19LC-LE705E_GB.indd 19 2009/10/09 14:13:042009/10/09 14:13:04
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp lc 32lu700e bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp lc 32lu700e in de taal/talen: Engels als bijlage per email.

De handleiding is 7,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Sharp lc 32lu700e

Sharp lc 32lu700e Gebruiksaanwijzing - Nederlands - 52 pagina's

Sharp lc 32lu700e Gebruiksaanwijzing - Deutsch - 52 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info