141096
1
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISION COULEUR À ÉCRAN
À CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO
LC-26SA1E LC-26SV1E LC-32SA1E LC-32SV1E
Printed in Hungary
Gedruckt in Ungarn
Imprimé en Hongrie
Stampato in Ungheria
Gedrukt in Hongarije
Impreso en Hungría
TINS-C612WJZZ
OPERATION MANUAL / BEDIENUNGSANLEITUNG / MODE D’EMPLOI / MANUALE DI ISTRUZIONI / GEBRUIKSAANWIJZING / MANUAL DE MANEJO
LC
-
26SA1E
LC
-
26SV1E
LC
-
32SA1E
LC
-
32SV1E
C612WJZZ
1
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
NEDERLANDS
ESPAÑOL
06P08-HU-NG
PIN
Printed on environmentally friendly paper
Auf ökologischem Papier gedruckt
Imprimé sur papier écologique
Stampato su carta ecologica
Afgedrukt op ecologisch papier
Impreso en papel ecológico
(672.2) / [806.0]
(672,2) / [806,0]
(136.5) / [137.4]
(136,5) / [137,4]
(350.5) / [389.0]
(350,5) / [389,0]
(577.4) / [700.0]
(577,4) / [700,0]
(501.0) / [577.0]
(501,0) / [577,0]
(560.0) / [636.0]
(560,0) / [636,0]
(325.3) / [394.6]
(325,3) / [394,6]
200.0 / 200,0
115.0 / 115,0
100.0 / 100,0
100.0 / 100,0
522.2
522,2
59.0
59,0
200.0 / 200,0
75.5
75,5
194.3
194,3
LC-26SA1E / LC-26SV1E / LC-32SA1E / LC-32SV1E
( ) : LC-26SA1E
LC-26SV1E
[ ] : LC-32SA1E
LC-32SV1E
: LC-26SA1E
LC-26SV1E
LC-32SA1E
LC-32SV1E
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should
the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or
ASA
and of the same rating
as above, which is also indicated on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the
mains plug and fit an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of
in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious
electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this product may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.
The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug.
Before replacing the plug cover make sure that:
If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.
The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
LC-26SA1E / LC-26SV1E LC-32SA1E / LC-32SV1E
1
OPERATION MANUAL
ENGLISH
Dear SHARP customer …………………………………… 1
Contents …………………………………………………… 1
Important Safety Precautions ………………………… 2
Supplied accessories …………………………………… 2
Quick guide ………………………………………………… 3
Attaching the stand …………………………………… 3
Setting the TV ………………………………………… 3
Inserting the batteries ………………………………… 4
Using the remote control unit ………………………… 4
Cautions regarding the remote control unit 4
Remote control unit …………………………………… 5
TV (Front view) ………………………………………… 6
TV (Rear view) ………………………………………… 6
Turning on the power ………………………………… 7
Standby mode ………………………………………… 7
Turning off the power ………………………………… 7
Initial auto installation ………………………………… 7
Using the programme list …………………………… 7
Using external equipment ……………………………… 8
Connecting a VCR …………………………………… 8
Connecting a game console or camcorder ………… 8
Connecting a DVD player …………………………… 8
Connecting a decoder ……………………………… 9
Connecting a PC ……………………………………… 9
Using AV Link function ……………………………… 9
Menu operations ………………………………………… 10
Menu operation buttons ……………………………… 10
On-Screen Display …………………………………… 10
Common operations ………………………………… 11
Picture menu …………………………………………… 12
AV Mode …………………………………………… 12
OPC ……………………………………………… 12
Picture adjustments ……………………………… 12
Advanced …………………………………………12
Colour Temp. …………………………………13
Black ………………………………………… 13
3D-Y/C ……………………………………… 13
Monochrome ………………………………… 13
Film Mode …………………………………… 13
I/P Setting …………………………………… 13
Audio menu …………………………………………… 13
AV Mode …………………………………………… 13
Audio adjustments ……………………………… 13
Surround…………………………………………… 13
Auto Vol. …………………………………………… 13
Clear Voice ……………………………………… 13
Contents
Power Control menu ………………………………… 14
No Signal Off ……………………………………… 14
No Operation Off …………………………………14
Power Management ……………………………… 14
Setup menu …………………………………………… 14
Auto Installation ………………………………… 14
Programme Setup………………………………… 14
Auto Search ………………………………… 14
Manual Adjust ……………………………… 15
Fine ……………………………………… 15
Colour sys. ……………………………… 15
Sound sys. (Broadcasting system)…… 15
Label …………………………………… 15
Skip ……………………………………… 15
Decoder ………………………………… 15
Lock ……………………………………… 15
Sort …………………………………………… 15
Erase Programme …………………………… 15
Child Lock ………………………………………… 16
Input Label …………………………………………16
Fine Sync. ………………………………………… 16
Position …………………………………………… 17
WSS (Wide Screen Signalling) ………………… 17
4:3 Mode ………………………………………… 17
Language ………………………………………… 17
Option menu …………………………………………… 17
Audio Only ………………………………………… 17
DNR (Digital Noise Reduction) ………………… 18
HDMI Setup ……………………………………… 18
Input Select ……………………………………… 18
Colour System …………………………………… 18
Demo ……………………………………………… 18
Useful features …………………………………………… 19
WIDE MODE …………………………………………… 19
Still image …………………………………………… 20
Teletext function ……………………………………… 20
Appendix …………………………………………………… 21
Troubleshooting ……………………………………… 21
RS-232C port specifications …………………………22
Specifications ………………………………………… 23
Optional accessories ………………………………… 23
PC compatibility chart ………………………………… 23
End of life disposal ……………………………………24
The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from
the actual operations.
The examples used throughout this manual are based on the LC-32SA1E model.
The factory preset PIN is “1234”.
“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
ENGLISH
TV/AV only PC onlyAV only
: these icons used throughout this manual indicate the menu item
can be set or adjusted only in the selected input mode.
TV only
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-
free operation of your product, please read the Important Safety Precautions carefully before using this product.
Dear SHARP customer
The “HD ready” Logo is a trademark of EICTA.
LC-32SA1E_GB_a 06.7.25, 11:27 AM1
2
Important Safety Precautions
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the
product. Do not use liquid cleaners or aerosol cleaners.
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub,
swimming pool and in a wet basement.
Do not place vases or any other water-filled containers on this product.
The water may spill onto the product causing fire or electric shock.
Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can
cause the product to fall, resulting in serious personal injuries as well as damage to the product.
Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with
the product. When mounting the product on a wall, be sure to follow the manufacturer’s
instructions. Use only the mounting hardware recommended by the manufacturer.
When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops,
excessive force and uneven floor surface can cause the product to fall from the cart.
Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not
cover or block these vents and openings since insufficient ventilation can cause overheating
and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since
they can block ventilation openings. This product is not designed for built-in installation; do not place the product
in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturers
instructions are followed.
The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or
impact applied. If the LCD panel is broken, be careful not to be injured by broken glass.
Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-
generating products (including amplifiers).
To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
Do not display a still picture for a long time, as this could cause an afterimage to remain.
There is power consumption always if main plug is connected.
The LCD panel is a very high technology product, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as
a fixed point of blue, green or red.
This is within product specifications and does not constitute a fault.
Precautions when transporting the TV
When moving the TV, it should always be carried by two people, using both hands, be careful not to apply
pressure to the display.
Supplied accessories
Remote control unit (g1) AC cord (g1)
Pages 4 and 5
Product shape varies in
some countries.
Page 3
“AA” size battery (g2) ......... Page 4
Cable clamp (g1)
Page 3
Cable tie (g1)
Page 3
3 RCA to 15-pin D-sub
adapter (g1)
Page 8
Operation manual (This publication)
Stand unit (g1)
Page 3
LC-32SA1E_GB_a 06.7.25, 11:27 AM2
3
Quick guide
Attaching the stand
Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal.
1 Confirm the 8 screws supplied with the TV.
Short screws (m4)
(used in step 2)
Long screws (m4)
(used in step 4)
2 Attach the two parts of the stand unit to each other
using the 4 short screws as shown.
3 Insert the stand into the opening on the bottom of
the TV.
4 Insert and tighten the 4 long screws on the rear
of the TV as shown.
NOTE
To detach the stand, perform the above steps in reverse order.
Before performing work spread cushioning over the base area to lay the TV on, making sure the
area is completely flat. This will prevent it from being damaged.
Setting the TV
Standard DIN45325
plug (IEC 169-2)
75-ohm coaxial cable
Setting the TV on the wall
This TV should be mounted on the wall only with the wall mount bracket available from SHARP. (See page 23.) The
use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting
or mounting that results in accident or injury.
You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall.
Ferrite Core
The Ferrite Core should be permanently attached
and never removed from the AC cord.
AC cord
Product shape
varies in some
countries.
Place the TV close to the
AC outlet, and keep the
power plug within reach.
Ferrite Core
Cable clamp
Cable tie
For LC-26SA1E, LC-26SV1E
LC-32SA1E_GB_a 06.7.25, 11:27 AM3
4
Quick guide
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Do not mix batteries of different types. Different types of batteries have different characteristics.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any
chemical leakage, wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
30°30°
Remote control sensor
5 m
1 Hold in the tab on the battery cover and pull the
cover towards the direction of the arrow.
2 Insert two supplied AA size batteries.
Place batteries with their terminals corresponding
to the (e) and (f) indications in the battery
compartment.
3 Insert the smaller tab of the battery cover into the
opening (1), and press down on the cover until
it clicks in place (2).
Inserting the batteries
Before using the TV for the first time, insert two “AA” size batteries (supplied). When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new “AA” size batteries.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote
control unit and sensor may prevent proper operation.
Cautions regarding the remote control unit
Do not expose the remote control unit to shock.
In addition, do not expose the remote control unit to liquids, and do not
place in an area with high humidity.
Do not install or place the remote control unit under direct sunlight. The
heat may cause deformation of the unit.
The remote control unit may not work properly if the remote control sensor
of the TV is under direct sunlight or strong lighting. In such case, change
the angle of the lighting or TV, or operate the remote control unit closer to
the remote control sensor.
1
2
LC-32SA1E_GB_a 06.7.25, 11:27 AM4
5
Remote control unit
Quick guide
Selectable items
NICAM STEREO, MONO
NICAM CH A, NICAM CH B,
NICAM CH AB, MONO
NICAM MONO, MONO
Signal
Stereo
Bilingual
Monaural
Selectable items
STEREO, MONO
CH A, CH B, CH AB
MONO
Signal
Stereo
Bilingual
Monaural
NOTE
When no signal is input, the sound mode will display “MONO”.
3 (Freeze/Hold)
(See page 20.)
B (Standby/On)
Enter standby mode or turn on the
power.
(See page 7.)
[ (Subtitle for Teletext)
(See page 20.)
END
Exit the menu screen.
i (k/l) (Volume)
i (k) Increase the volume.
i (l) Decrease the volume.
0–9
Set the channel in TV mode.
Set the page in Teletext mode.
A (Flashback)
Press to return to the previous
image in normal viewing mode.
2 (Sound mode)
Select the sound multiplex mode.
(See below.)
SURROUND
Switch the surround effects on and off.
1 (Subpage)
(See page 20.)
SLEEP
Set the sleep timer on (in units of 30 min.
up to max. 2 hr. 30 min.) and off.
k (Reveal hidden Teletext)
(See page 20.)
p (Display information)
(See page 20.)
RETURN
Return to the previous menu screen.
e (Mute)
Switch the sound on and off.
b (INPUT SOURCE)
Select an input source.
(TV, EXT1, EXT2, EXT3, EXT4, EXT5)
(See page 8.)
f (WIDE MODE)
Select the wide mode.
(See page 19.)
Set the area of magnification in Teletext
mode. (See page 20.)
MENU
Display the MENU screen.
(See page 10.)
P (r/s)
TV: Select the channel.
External: Switch to TV input mode.
Teletext: Move to the next/previous page.
OK
Execute a command within the menu
screen.
Display the programme list. (Except
external input.)
(See page 7.)
a/b/c/d (Cursor)
Select a desired item on the setting
screen.
Colour (Red/Green/Yellow/Blue)
(See page 20.)
m (Teletext)
(See page 20.)
NICAM TV broadcasts selection A2 TV broadcasts selection
LC-32SA1E_GB_a 06.7.25, 11:27 AM5
6
TV (Front view)
Quick guide
TV (Rear view)
AC INPUT terminal
OPC sensor
Remote control sensor
B (Standby/On) indicator
OPC indicator
a (Power button)
b (Input button)
i (l/k)
(Volume buttons)
P (s/r)
(Programme [channel] buttons)
SLEEP indicator
EXT 2 (RGB) terminal
EXT 3 terminals
Headphone jack
EXT 1 (RGB) terminal
EXT 5 (HDMI/AUDIO)
terminals
Antenna input terminal
OUTPUT (Audio) terminals
EXT 4 terminals
RS-232C terminal
For LC-26SA1E,
LC-26SV1E
LC-32SA1E_GB_a 06.7.25, 11:27 AM6
7
Turning on the power
Press a on the TV.
The B indicator on the TV changes from red to green.
NOTE
If you are not going to use this TV for a long period of
time, be sure to remove the AC cord from the power outlet.
Weak electric power is still consumed even when a is
turned off.
Initial auto installation
When the TV powers on for the first time after purchase,
the initial auto installation is invoked. You can
automatically set language, country and channels in
successive operations.
1 Setting the on-screen display language
1 Press a/b/c/d to select the desired language
listed on the screen.
2 Press OK to enter the setting.
2 Setting the country or area
1 Press a/b/c/d to select your country or area
listed on the screen.
2 Press OK to enter the setting.
The programme auto search starts at the same time.
After this setting, auto search starts with the following
order.
1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download
You do not need to do anything during the auto search.
NOTE
The initial auto installation functions only once. If the initial
auto installation is not completed, (ex: When menu screen
disappeared by not operating for a few minutes, when
the power shut down, etc.), try Auto Installation from the
Setup menu. (See page 14.)
The initial auto installation stops by pressing RETURN.
Standby mode
Press B on the remote control unit.
The TV enters standby mode and the image on the screen
disappears.
The B indicator on the TV changes from green to red.
Turning off the power
Press a on the TV.
The B indicator on the TV gradually turns off.
When the TV is turned off by a, you cannot turn on the
power by pressing B on the remote control unit.
Off
Red
Green
Display status indicator
Power off
The TV is in standby mode.
The TV is on.
Using the programme list
You can also select the desired channel from
programme list instead of using 0-9 numeric buttons
or P (
rr
rr
r/
ss
ss
s).
The setup menu disappears and you can watch the
programme on channel 1.
1 Press OK when no other menu screen is
displayed. (Except external input.)
2 Press a/b to select the desired channel to tune
in, and then press OK.
3 Press END to exit the Programme List.
Quick guide
LC-32SA1E_GB_a 06.7.25, 11:27 AM7
8
Using external equipment
Setting the input source
To view external source images, select the input source using b on the remote control unit or TV.
NOTE
The cables marked with * are commercially available items.
Connecting a VCR
You can use the EXT 1 or 2 terminals when connecting
a VCR and other audiovisual equipment.
If your VCR supports TV-VCR advanced AV Link
systems, you can connect the VCR to the EXT 2
terminal of the TV using the fully-wired SCART cable.
NOTE
TV-VCR advanced AV Link systems may not be compatible
with some external sources.
TV-OUT from EXT1 is not outputted when EXT5 (HDMI) is
selected as the input.
YPB
(
CB)
PR
(
CR)
COMPONENT
EXT 4
ø 3.5 mm stereo
minijack cable*
Component
cable*
3 RCA to 15-pin
D-sub adapter
(Supplied)
VCR
Decoder
SCART cable* SCART cable*
EXT 1 or 2
VIDEOS-VIDEOL-AUDIO-R
AV OUTPUT
Connecting a DVD player
You can use the EXT 2, 3, 4 or 5 (HDMI) terminals
when connecting to a DVD player and other
audiovisual equipment.
DVD player
AUDIO cable*
EXT 3
Composite
video cable*
DVD player
HDMI cable*
When using an HDMI-DVI
conversion adapter/cable,
input the Audio signal here.
EXT 5
or
DVD player
S-video cable*
NOTE
When connecting an HDMI-DVI conversion adapter/cable
to the HDMI terminal, the image may not come in clearly.
NOTE
EXT 3: The S-VIDEO terminal has priority over the VIDEO
terminals.
A game console, camcorder and some other
audiovisual equipment are conveniently connected
using the EXT 3 terminals.
NOTE
EXT 3: The S-VIDEO terminal has priority over the VIDEO
terminals.
Connecting a game console or
camcorder
Game console Camcorder
or
S-video cable*
Composite
video cable*
AUDIO cable*
EXT 3
VIDEOS-VIDEOL-AUDIO-R
AV OUTPUT
LC-32SA1E_GB_a 06.7.25, 11:27 AM8
9
Using external equipment
NOTE
• The cables marked with * are commercially available
items.
The PC input terminals are DDC1/2B-compatible.
Refer to page 23 for a list of PC signals compatible with
the TV.
• Macintosh adaptor may be required for use for some
Macintosh computers.
When connecting to a PC, the correct input signal type is
automatically detected.
This TV incorporates three typical AV Link functions
for smooth connections between the TV and other
audiovisual equipment.
One Touch Play
While the TV is in standby mode, it automatically turns
on and plays back the image from the audiovisual
source (e.g. VCR, DVD).
WYSIWYR (What You See Is What You Record)
When the remote control unit of the connected VCR
has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.
Preset Download
Automatically transfers the channel preset information
from the tuner on the TV to the one on the connected
audiovisual equipment (e.g. VCR) via the EXT 2
terminal.
NOTE
Refer to operation manuals of each external equipment
for the details.
Only works when the audiovisual equipment is connected
to the EXT 2 terminal on the TV with AV Link via a fully
wired SCART.
The use of the AV Link function is only possible if the TV-
set has enforced a complete auto-installation with the
connected audiovisual equipment (page 7, Initial auto
installation).
The availability of the AV Link function depends on the
audiovisual equipment used. Depending on the
manufacturer and type of equipment used, it is possible
that the described functions may be completely or partially
unusable.
Using AV Link function
Connecting a PC
Use the EXT 4 terminals to connect a PC.
PC
ø 3.5 mm stereo minijack cable*
RGB cable*
PC
RGB/DVI conversion cable*
ø 3.5 mm stereo minijack cable*
EXT 4
EXT 4
Connecting a decoder
You can use the EXT 1 terminal when connecting a
decoder and other audiovisual equipment.
NOTE
In cases when the decoder needs to receive signal from
the TV, make sure to set “Decoder” to “EXT1” in the
Programme Setup “Manual Adjust” menu. (See page 15.)
Do not connect the decoder to the EXT 2 terminal.
Decoder
EXT 1
SCART cable*
LC-32SA1E_GB_b 06.7.25, 11:35 AM9
10
MENU
[
Option
...
Colour System
]
Option
Audio Only
DNR
Input Select
Colour System
[Off]
[CVBS]
[AUTO]
Demo
Menu operations
On-Screen Display
Example
1 Item displayed in yellow
This indicates the item currently selected.
2 Item in brackets
This indicates the current setting for the item.
3 Item displayed in white
This indicates an item can be selected.
4 Item with 4 displayed in grey
This indicates the item cannot be selected for various
reasons.
NOTE
Menu options differ in the selected input modes, but the
operating procedures are the same.
The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
Menu operation buttons
Use the following buttons on the remote control unit to
operate the menu.
MENU: Press to open or close the menu screen.
a/b/c/d: Press to select a desired item on the screen
or adjust a selected item.
OK: Press to go to the next step or complete the
setting.
RETURN: Press to return to the previous step.
END: Press to exit the menu item.
1
2
3
4
LC-32SA1E_GB_b 06.7.25, 11:35 AM10
11
MENU
[
Picture
]
Picture Audio
Contrast
OPC
AV Mode [STANDARD]
[Off]
Brightness
Colour
Tint
Sharpness
Advanced
Reset
[+30]
[0]
[0]
[0]
[0]
0
–30
–30
–30
–10
+40
+30
+30
+30
+10
Backlight [+6] –8
+8
Menu Operation: B
1 Press MENU and the MENU screen displays.
2 Press c/d to select the desired menu.
3 Press a/b to select the desired menu item
(Example: Backlight, Contrast, etc).
4 Press c/d to adjust the item to your desired
position.
Select “Reset” to reset all adjustment items to the
factory preset values.
Off
On
On(Display)
MENU
[
Picture
...
Backlight
]
Picture Audio
Contrast
OPC
AV Mode [STANDARD]
[Off]
Brightness
Colour
Tint
Sharpness
Advanced
Reset
[+30]
[0]
[0]
[0]
[0]
0
30
30
30
10
+40
+30
+30
+30
+10
Backlight [+6] 8
+8
1 Press MENU and the MENU screen displays.
2 Press c/d to select the desired menu.
3 Press a/b to select the desired menu item, and
then press OK (Example: AV Mode, OPC, etc).
Select “Reset” to reset all adjustment items to the
factory preset values.
4 Press a/b/c/d to select the desired item, and
then press OK.
Menu operations
Common operations
Menu Operation: A
Menu Operation: C
1 Press MENU and the MENU screen displays.
2 Press c/d to select the desired menu.
3 Press a/b to select the desired menu item, and
then press OK (Example: Advanced, Demo, etc).
4 Press a/b to select the desired menu item, and
then press OK (Example: Colour Temp., Black,
etc).
Select “Reset” to reset all adjustment items to the
factory preset values.
5 Press a/b/c/d to select or adjust the desired
item, and then press OK.
LC-32SA1E_GB_b 06.7.25, 11:35 AM11
12
Picture menu
TitleB
Menu operations
MENU
[
Picture
]
Picture Audio
Contrast
OPC
AV Mode [STANDARD]
[Off]
Brightness
Colour
Tint
Sharpness
Advanced
Reset
[+30]
[0]
[0]
[0]
[0]
0
30
30
30
10
+40
+30
+30
+30
+10
Backlight [+6] 8
+8
Off: The brightness is fixed at the value set in Backlight.
On: Automatically adjusts
On(Display): Displays the OPC effect on the screen while
adjusting the brightness of the screen.
OPC
Menu Operation: A (page 11)
Automatically adjust the brightness of the screen.
NOTE
• When set to “On”, the TV senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure no object obstructs the OPC sensor, which could
affect its ability to sense surrounding light.
NOTE
• You can adjust the factory preset parameters given in
“STANDARD”, “SOFT”, “ECO” and “DYNAMIC”. The
parameters chosen affect each of the input sources.
The items marked with * are only available for TV/AV input
mode.
STANDARD: For a highly defined image in a normally
bright room
SOFT*: Creates a softer image.
ECO*: Reduces power consumption.
USER: Allows the user to customise settings as desired.
You can set the mode for each input source.
DYNAMIC*: For a clear-cut image emphasising high
contrast for sports viewing
AV Mode
Menu Operation: A (page 11)
AV Mode gives you five viewing options to choose from
to best match the system environment, which can vary
due to factors like room-brightness, type of programme
watched or the type of image input from external
equipment.
Advanced
Menu Operation: C (page 11)
This TV provides various advanced functions for
optimising the picture quality.
Colour Temp.
Black
3D - Y/C
Monochrome
Film Mode
I/P Setting
High
Mid-High
Middle
Mid-Low
Low
TV/AV only
Item
Item
Picture adjustments
Menu Operation: B (page 11)
Adjust the picture to your preference with the following
picture settings.
Adjustment items for AV source
c button d button
Backlight The screen dims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less brightness For more
brightness
Red For weaker red For stronger red
Green For weaker green
Blue For weaker blue For stronger blue
Selectable
items
For stronger
green
c button d button
Backlight The screen dims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less brightness For more
brightness
Colour For less colour
intensity
For more colour
intensity
Tint Skin tones
become purplish
Sharpness For less sharpness For more
sharpness
Selectable
items
Skin tones
become greenish
Adjustment items for PC source
LC-32SA1E_GB_b 06.7.25, 11:35 AM12
13
Menu operations
Black
For easier viewing, change the viewing depth by
selecting a level for automatically adjusting the dark
portion of an image.
3D-Y/C
Provide high quality images with minimal dot crawl and
cross colour noise by detecting changes in the image.
Off: No detecting
Standard: Normal adjustment
Fast: Set the optimum image quality for fast-moving
images.
Slow: Set the optimum image quality for slow-moving
images.
NOTE
3D-Y/C may not operate depending on the input signal
type or noisy input signal.
3D-Y/C has even more effect on composite video signals
(CVBS).
Monochrome
For viewing a video in monochrome.
Film Mode
Automatically detect a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each
still film frame for high-definition picture quality.
I/P Setting
Adjust the image and input signal can give you a more
beautiful picture.
Interlace: Display finely detailed images for TV or video,
etc.
Progressive: Display smooth images for still images or
graphics, etc.
Audio menu
Audio adjustments
Menu Operation: B (page 11)
You can adjust the sound quality to your preference
with the following settings.
MENU
[
Audio
]
Audio Power Control
Treble
Bass
Balance
Surround
Reset
[Off]
Auto Vol. [Off]
Clear Voice [Off]
[0]
[0]
15
L
+15
[0] 15
+15
R
AV Mode [STANDARD]
Surround
Menu Operation: A (page 11)
Surround function allows you to enjoy realistic “live”
sound.
NOTE
You can also choose surround effects by pressing
SURROUND on the remote control unit.
AV Mode
Menu Operation: A (page 11)
This option links to AV Mode in the Picture menu. (See
page 12.)
Colour Temp.
Adjust the colour temperature to give the best white
image.
High: White with bluish tone
Mid-High: Intermediate tone between High and Middle
Middle: Natural tone
Mid-Low: Intermediate tone between Middle and Low
Low: White with reddish tone
Auto Vol.
Menu Operation: A (page 11)
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. The Automatic Volume
Control (Auto Vol.) solves this problem and equalises
the volume levels.
Clear Voice
Menu Operation: A (page 11)
This function emphasises speech voice against the
background noise for more intelligibility. It is not
recommended for music sources.
TV/AV only
NOTE
The I/P Setting is set to “Progressive” when Film Mode is
“On”.
Item
Item
Selectable
items
c button d button
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decrease audio
from the right
speaker
Decrease audio
from the left
speaker
Item
LC-32SA1E_GB_b 06.7.25, 11:35 AM13
14
Setup menu
Auto Installation
You can run Auto Installation again, even after setting
up the preset channels.
1 Press MENU and the MENU screen displays.
2 Press c/d to select Setup.
3 Press a/b to select Auto Installation, and then
press OK.
If you have already set the PIN under Child Lock,
enter it here.
See page 16 for setting PIN.
4 Press c/d to select Ye s , and then press OK.
5 You can set language and country the same as in
the initial auto installation. Follow steps 1 and 2
on page 7.
Programme Setup
This section describes how to set up analogue TV
channels manually.
Menu operations
MENU
[
Setup
]
Setup Option
Child Lock
Auto Installation
Programme Setup
Position
WSS
4:3 Mode [Panorama]
[On]
[English]Language
Auto Search
You can automatically search for and download TV
channels by performing the procedure below. This is
the same function as from programme auto search to
preset download in Auto Installation.
1 Repeat steps 1 to 4 in Programme Setup.
2 Press c/d to select Ye s , and then press OK.
1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download
1 Press MENU and the MENU screen displays.
2 Press c/d to select Setup.
3 Press a/b to select Programme Setup, and
then press OK.
If you have already set the PIN under Child Lock,
enter it here.
See page 16 for setting PIN.
4 Press a/b to select Auto Search, Manual
Adjust, Sort or Erase Programme, and then
press OK.
Auto Search
Manual Adjust
Sort
Erase Programme
No Yes
Power Control menu
No Signal Off
Menu Operation: A (page 11)
When set to “Enable” the TV will automatically enter
the standby mode if there is no signal input for 15
minutes.
• Five minutes before the TV enters standby mode, the
remaining time displays every minute.
NOTE
• When a TV programme finishes, this function may not
operate.
MENU
[
Power Control
]
Audio Power Control
No Signal Off
No Operation Off
[Disable]
[Disable]
No Operation Off
Menu Operation: A (page 11)
When set to “Enable” the TV will automatically enter
the standby mode if no operations are performed for
3 hours.
• Five minutes before the TV enters standby mode, the
remaining time displays every minute.
Power Management
Menu Operation: A (page 11)
When set, the TV will automatically enter the standby
mode.
Off: No power management
Factory preset value.
Mode1: If there is no signal input for 8 minutes, the TV
enters the standby mode.
Even if you start using the PC and the signal
inputs again, the TV stays in standby mode.
The TV turns on again by pressing a on the TV
or B on the remote control unit. (See page 7.)
Mode2: If there is no signal input for 8 seconds, the
TV enters the standby mode.
When you start using the PC and the signal
inputs again, the TV turns on.
The TV turns on again by pressing a on the TV
or B on the remote control unit. (See page 7.)
TV/AV only
TV/AV only
TV only
TV only
PC only
Item
LC-32SA1E_GB_b 06.7.25, 11:35 AM14
15
Manual Adjust
You can set some channel items manually.
1 Press MENU and the MENU screen displays.
2 Press c/d to select Setup.
3 Press a/b to select Programme Setup, and
then press OK.
If you have already set the PIN under Child Lock,
enter it here.
See page 16 for setting PIN.
4 Press a/b to select Manual Adjust and then
press OK.
5 Press c/d to select Ye s , and then press OK.
6 Press a/b/c/d to select the channel you want
to edit, and then press OK.
The selected channel information displays.
7 Press a/b to select the desired menu item, and
then press OK.
8 Press a/b/c/d to select or adjust.
MENU
[
Setup
...
Programme Setup
]
Fine
Colour sys.
Sound sys.
Label
Skip
Decoder
Lock
[179.25]
[AUTO]
[B/G]
[Off]
[SAT.1]
[Off]
[Off]
179.25 MHz
Menu operations
NOTE
When you exit Programme Setup “Manual Adjust” menu,
preset download automatically runs if you change
information on that menu.
Fine
You can adjust the frequency to your desired position.
NOTE
Adjust while checking the background picture as a
reference.
Instead of pressing c/d to adjust the frequency in step
8 above, you can set by directly entering the frequency
number of the channel with 09.
EXAMPLE
179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
49.25 MHz: Press 4 s 9 s 2 s 5 s OK.
Label
When a TV channel sends its Network Name, the Auto
Installation detects the information and assigns a name
to it. However, you can change individual channel
names.
1 Repeat steps 1 to 7 in Manual Adjust.
Skip
Channels with “Skip” set to “On” are passed over when
using Pr/Ps even if selected while watching the
image from the TV.
Decoder
When connecting a decoder to the unit, you need to
select EXT1.
NOTE
“Off” is factory preset value.
Lock
You can block the viewing of any channel.
NOTE
See page 16 for setting PIN.
When Lock is set to “On” for a channel, “Child lock has
been activated.” displays, and the image and sound of
the channel are blocked.
When pressing OK while “Child lock has been activated.”
displays, PIN input menu will display. Inputting the correct
PIN lifts the child lock temporarily until the power is turned
off.
Colour sys.
Select the optimum colour systems to receive. (AUTO,
PAL, SECAM)
Sound sys. (Broadcasting system)
Select the optimum sound systems (Broadcasting
systems) to receive. (B/G, D/K, I, L, L’)
Sort
Channel positions can be sorted freely.
1 Repeat steps 1 to 4 in Programme Setup.
2 Press c/d to select Ye s , and then press OK.
3 Press a/b/c/d to select the channel you want
to move, and then press OK.
4 Press a/b/c/d to move it to the desired
position, and then press OK.
5 Repeat steps 3 and 4 until all desired channels
are sorted.
Erase Programme
An individual programme can be erased.
1 Repeat steps 1 to 4 in Programme Setup.
2 Press c/d to select Yes , and then press OK.
3 Press a/b/c/d to select the channel you want
to erase, and then press OK.
A message screen pops up.
4 Press c/d to select Yes , and then press OK to
erase the selected programme. All the subsequent
programmes move up.
5 Repeat steps 3 and 4 until all desired channels
are erased.
2 Press a/b/c/d to select each character of the
new name for the channel, and then press OK.
3 Repeat step 2 above until the name is fully spelt
out.
The name can be 5 characters or less.
If a channel name is less than 5 characters, select
“END”, then press OK.
LC-32SA1E_GB_b 06.7.25, 11:35 AM15
16
Child Lock
Allow you to use a PIN to protect certain settings from
being accidentally changed.
Changing the PIN
1 Press MENU and the MENU screen displays.
2 Press c/d to select Setup.
3 Press a/b to select Child Lock, and then press
OK.
New PIN
Reconfirm
Change PIN
Reset
4 Enter the 4-digit number as a PIN using 0 9.
5 Enter the same 4-digit number as in step 4 to
confirm.
“The system PIN has been changed successfully”
displays.
NOTE
• To view a locked channel (Lock setting in Programme
Setup “Manual Adjust” is set to “On”), you must enter a
PIN. (See page 15.) When you select a locked channel, a
PIN prompt message pops up. Press OK to display the
PIN input window.
Resetting the PIN
Allow you to reset your PIN to the factory preset “1234”.
1 Repeat steps 1 to 3 in Changing the PIN.
2 Enter the PIN.
3 Press a/b to select Reset, and then press OK.
4 Press c/d to select Ye s , and then press OK.
NOTE
As a precautionary measure, make a note of your PIN
on the back of this operation manual, cut it out and
keep it in a safe place that children cannot reach.
See page 21 for resetting the current PIN to the factory
preset “1234” if you lose or forget your PIN.
Menu operations
Input Label
You can assign each input source a label you like.
1 Press b to select the desired input source.
2 Press MENU and the MENU screen displays.
3 Press c/d to select Setup.
4 Press a/b to select Input Label, and then press
OK.
5 Press a/b/c/d to select each character of the
new name for the input source, and then press
OK.
6 Repeat step 5 above until the name is fully spelt
out, and then press OK.
The name can be 6 characters or less.
• If a label name is less than 6 characters, select
“END”, then press OK.
NOTE
You cannot change the label if the input source is TV.
TV only
Fine Sync.
Menu Operation: C (Page 11)
Ordinarily, the TV automatically adjusts image positions
coming from PC (Auto Sync. function). In some cases,
however, manual adjustment is needed to optimise the
image.
H-Pos.: Centres the image by moving it to the left or right.
V-Pos.: Centres the image by moving it up or down.
Clock: Adjusts when the image flickers with vertical
stripes.
Phase: Adjusts when characters have low contrast or
when the image flickers.
PC only
NOTE
If you need to adjust the image position, adjust the position
using your PC.
Item
LC-32SA1E_GB_b 06.7.25, 11:35 AM16
17
Menu operations
Position
Menu Operation: C (Page 11)
For adjusting a picture’s horizontal and vertical
position.
NOTE
Adjustments are stored separately according to input
source.
Depending on the input signal type a position setting may
not be available.
H-Pos.: Centres the image by moving it to the left or right.
V-Pos.: Centres the image by moving it up or down.
Option menu
Audio Only
Menu Operation: A (page 11)
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
MENU
[
Option
]
Option
Audio Only
DNR
Input Select
Colour System
[Off]
[CVBS]
[AUTO]
Demo
Language
Menu Operation: A (page 11)
You can select a language from the Setup menu. Select
from among 13 languages. (Dutch, English, Finnish,
French, German, Greek, Italian, Polish, Portuguese,
Russian, Spanish, Swedish, Turkish)
NOTE
“HDMI Setup” is displayed only when “EXT5” is selected
from the INPUT SOURCE menu.
Off: Both screen images and audio are output.
On: Audio is output without screen image.
TV/AV only
Item
Item
WSS (Wide Screen Signalling)
Menu Operation: A (Page 11)
WSS allows a television to switch automatically among
the different screen formats.
NOTE
Use WIDE MODE if an image does not switch to the correct
screen format. When the broadcast signal contains no
WSS information, the function will not work even if enabled.
(See page 19.)
WSS signal 4:3 screen
4:3 mode “Panorama”
4:3 mode “Normal”
4:3 Mode
Menu Operation: A (page 11)
The WSS signal has 4:3 auto-switching that allows you
to select between Normal and Panorama.
Normal: Normal range keeping 4:3 or 16:9 aspect ratio
Panorama: Wide image without side bars
TV/AV only
TV/AV only
Item
LC-32SA1E_GB_b 06.7.25, 11:35 AM17
18
Menu operations
HDMI Setup
HDMI (High-Definition Multimedia Interface) terminal
selection.
1 To watch an HDMI equipment image, select
EXT5 from INPUT SOURCE menu using b
on the remote control unit or TV.
2 Press MENU and the MENU screen displays.
3 Press c/d to select Option.
4 Press a/b to select HDMI Setup, and then
press OK.
• “HDMI Setup” is displayed only when “EXT5” is
selected from the INPUT SOURCE menu.
MENU
[
Option
...
HDMI Setup
]
Option
Audio Only
DNR
HDMI Setup
[Off]
Demo
5 Press a/b to select the desired item, and then
press OK.
6 Press a/b/c/d to select the desired setting, and
then press OK.
DNR (Digital Noise Reduction)
Menu Operation: A (page 11)
Produce a clearer image. (Off, High, Low)
Selectable items
RGB/YCbCr 4:4:4/
YCbCr 4:2:2
ITU601/ITU709
Normal/
Enhanced
Disable/Enable
Digital/Analogue
HDMI Setup
items
Signal
Type*
Colour
Matrix*
Dynamic
Range*
Auto View
Audio
Select
Description
Select the video signal
type from the HDMI
terminal.
Select the internal colour
space conversion method
when an RGB signal is
input.
Select the signal amplitude
range. Usually, select
“Normal”.
Set whether or not to use
WIDE MODE based on
signal recognition,
including an HDMI signal.
Select “Digital” for audio
signal via the HDMI
terminal. Select “Analogue”
for audio signal via the
AUDIO jack.
NOTE
• Refer to your external equipment operation manual for
the signal type.
Items with * may be greyed out (with 4) depending on
the type of signal input from the external equipment.
Colour System
Menu Operation: A (page 11)
You can change the colour system to one that is
compatible with the image on the screen. (AUTO, PAL,
SECAM, NTSC3.58, NTSC4.43, PAL-60)
NOTE
Factory preset value is “AUTO”.
If “AUTO” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, SECAM).
“NTSC3.58”, “NTSC4.43” and “PAL-60” cannot be
selected in TV tuner mode.
Input Select
Menu Operation: A (page 11)
For setting the signal type of external equipment.
NOTE
If no (colour) image displays, try to change the other
signal type.
Check the operation manual of the external equipment
for the signal type.
TV, EXT3 and EXT5 are not displayed in Input Select.
If both CVBS and RGB signals are input to EXT 1 or EXT 2
using a SCART cable, the TV may output an RGB signal
even though you have designated CVBS for the respective
terminal. This happens due to the setting of your external
equipment.
Demo
Menu Operation: C (page 11)
When activated, this function demonstrates some of
the functions of the TV on the screen.
Demo: Sets whether to activate the function.
Input Source: Selects whether to demonstrate all
functions of connected terminals or skip some.
Teletext: Sets whether to demonstrate Teletext.
Freeze: Sets whether to demonstrate Freeze.
Menu: Sets whether to demonstrate Menu.
Interval: Sets the interval between the presentations.
NOTE
Some demonstrations may not be presented depending
on the settings made above.
After switching on this demo function, it takes 70 seconds
approximately, before the TV-set starts the demo show.
The selected functions are shown in a self-repeating
sequence. Return to normal television-mode is possible
only by deactivating the demo-function.
TV/AV only
AV only
TV/AV only
TV/AV only
Input source Signal type
EXT 1 Y/C, CVBS, RGB
EXT 2
Y/C, CVBS, RGB
EXT 4
PC (RGB), COMPONENT (Y, P
B, PR)
Item
EXT 3 AUTO
LC-32SA1E_GB_b 06.7.25, 11:35 AM18
19
WIDE MODE
You can select the picture size. Selectable picture size
varies with the type of signal received.
Normal: For 4:3 “standard” pictures. A side bar appears
on each side.
Zoom 14:9: For 14:9 letterbox pictures. A thin side bar
appears on each side, and you may see bars on the
top and bottom with some programmes.
Panorama: In this mode the picture is progressively
stretched toward each side of the screen.
Full: For 16:9 squeeze pictures.
Cinema 14:9: For 14:9 letterbox pictures. Bars may
appear on the top and bottom with some programmes.
Cinema 16:9: For 16:9 letterbox pictures. Bars may
appear on the top and bottom with some programmes.
Full: Display with the Overscan image. Crop all sides of
screen.
Useful features
WIDE MODE
You can select the picture size.
1 Press f.
The WIDE MODE menu displays.
2 Press f or a/b to select a desired item on the
menu.
NOTE
Connect the PC before making adjustments. (See page
9.)
Selectable picture size may vary with input signal type.
EXAMPLE
Normal: Keeps the original aspect ratio in a full screen
display.
Full: An image fully fills the screen.
Normal Full
TV/AV only
PC only
4:3 Mode set to “Normal”
NOTE
If the signal contains no WSS information, Auto Selection
will not function even when the WSS option is enabled.
4:3 Mode set to “Panorama”
Manual Selection
1 Press f.
The WIDE MODE menu displays.
The menu lists the wide mode options selectable
for the type of video signal currently received.
2 Press f or a/b while the WIDE MODE menu
displays on the screen.
As you toggle down the options, each is immediately
reflected on the screen. No need to press OK.
Auto Selection
If you set WSS and 4:3 Mode in the Setup menu on
page 17, the optimum WIDE MODE is automatically
chosen for every broadcast, VCR or DVD containing
the WSS information.
WSS menu
To enable Auto Selection, set WSS in the Setup menu
to “On”. (See page 17.)
4:3 Mode menu
To set the type of the wide screen, select “Normal” or
“Panorama” in the 4:3 Mode menu. (See page 17.)
Item (for SD (Standard) signal)
Item (for HD (High-Definition) signal)
Item
LC-32SA1E_GB_b 06.7.25, 11:35 AM19
20
Teletext function
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
Your TV receives Teletext signals broadcast by a TV
network, and decodes them into graphical format for
viewing. News, weather and sports information, stock
exchange prices and programme previews are among
the many services available.
Turning on and off Teletext
1 Select a TV channel or external input source
providing the Teletext programme.
2 Press m to display the Teletext.
3 Press m again to display the Teletext on the right
screen and normal image on the left screen.
• Each time you press m, the screen switches as
shown below.
If you select a programme with no Teletext signal,
“No Teletext available.” displays.
The same message displays during other modes if
no Teletext signal is available.
NOTE
Teletext will not work if the selected signal type is RGB.
(See page 18.)
TELETEXT
TELETEXT
Time display
You can display the time information included in the
Teletext broadcasts.
1 Select a TV channel providing Teletext information.
(The time information is automatically captured.)
2 Press p. The channel display will appear on the
TV.
3 Press p again within the several seconds that
the channel display is on the screen.
Time information will display below the channel
display for several seconds.
4 Even when you change the TV channel, you can
display the time information with steps 2 and 3
above.
NOTE
• The time display cannot be stored once the power is
turned off. When you turn on the power, perform steps 1
to 4 again.
If acquired successfully, the time information will appear
in the upper-right corner of the screen by pressing MENU.
Still image
You can freeze a motion picture on the screen.
1 Press 3.
2 Press 3 again to exit still image.
NOTE
When this function is not available, “No still image display
available.” will display.
The still image automatically goes out after 30 minutes.
Useful features
Description
Increase or decrease the page number.
Select a group or block of pages displayed
in the coloured brackets at the bottom of the
screen by pressing the corresponding
Colour (Red/Green/Yellow/Blue) on the
remote control unit.
Directly select any page from 100 to 899 by
using 0–9.
Switch the Teletext image to Full, Upper half
or Lower half.
Reveal or hide hidden information such as
an answer to a quiz.
Stop updating Teletext pages automatically
or release the hold mode.
Display the subtitle or exit the subtitle
screen.
Subtitle will not be displayed when the
service does not contain the subtitle
information.
Reveal or hide subpages.
Red button: Move to the previous subpage.
• Green button: Move to the following subpage.
These two buttons are shown on the screen
by the signs l and k.
Buttons
P (r/s)
Colour (Red/
Green/Yellow/
Blue)
0–9
f (WIDE
MODE)
k (Reveal
hidden
Teletext)
3 (Freeze/
Hold)
[ (Subtitle
for Teletext)
1 (Subpage)
Button functions
LC-32SA1E_GB_c 06.7.25, 11:36 AM20
21
Check if you pressed B on the remote control unit. (See page 7.)
If the indicator on the TV lights up red, press B.
Is the AC cord disconnected? (See page 3.)
Check if you pressed a on the TV. (See page 7.)
External influences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after first turning the power off, or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
Are batteries inserted with polarity (e, f) aligned? (See page 4.)
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light illuminated to remote control sensor?
Is the image position correct? (See page 17.)
• Are screen mode adjustments (4:3 Mode/WSS) such as picture size made
correctly? (See pages 17 and 19.)
Adjust the picture tone. (See pages 12 and 13.)
Is the room too bright? The picture may look dark in a room that is too bright.
Check the colour system setting. (See pages 15 and 18.)
Check the HDMI Setup setting. (See page 18.)
The unit’s internal temperature has increased.
Remove any objects blocking vent or clean.
Check the power control setting. (See page 14.)
Is sleep timer set? Press SLEEP on the remote control unit until it sets to Off.
Is connection to other components correct? (See page 8 and 9.)
Is input signal type selected correctly after connection? (See page 18.)
Is the correct input source selected? (See page 8.)
Is non-compatible signal being input? (See page 23.)
Is picture adjustment correct? (See pages 12 and 13.)
Is the antenna connected properly? (See page 3.)
Is “On” selected in “Audio Only”? (See page 17.)
Is the volume too low? (See pages 5 and 6.)
Make sure that headphones are not connected. (See page 6.)
Check if you pressed e on the remote control unit. (See page 5.)
Troubleshooting
Appendix
IMPORTANT NOTE ON RESETTING THE PIN
We suggest that you remove the following instruction from the operation manual to prevent children from
reading it. As this operation manual is multilingual, we also suggest the same with each language. Keep it in
a safe space for future reference.
Cautions regarding use in high and low temperature environments
When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near
a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: –20°C to e60°C.
1 Repeat steps 1 to 3 in Changing the PIN. (See page 16.)
2 Enter “3001” to cancel out the current PIN.
The PIN resets to the factory preset “1234”.
Problem Possible Solution
No power.
Unit cannot be operated.
Remote control unit does not
operate.
Picture is cut off.
Strange colour, light colour, or
dark, or colour misalignment.
Power is suddenly turned off.
No picture.
No sound.
LC-32SA1E_GB_c 06.7.25, 11:36 AM21
22
Appendix
RS-232C port specifications
PC Control of the TV
When a program is set, the TV can be controlled from the PC
using the RS-232C terminal. The input signal (PC/video) can
be selected, the volume can be adjusted and various other
adjustments and settings can be made, enabling automatic
programmed playing. Attach an RS-232C cable cross-type
(commercially available) to a 9 pin D-sub/MINI-DIN (optional:
AN-A1RS) for the connections.
NOTE
This operation system should be used by a person who is
accustomed to using PCs.
Communication conditions
Set the RS-232C communications settings on the PC to match
the TV’s communications conditions. The TV’s communications
settings are as follows:
RS-232C serial control cable
(cross type, commercially available)
9 pin D-sub/MINI-DIN
conversion cable
(optional: AN-A1RS)
Communication procedure
Send the control commands from the PC via the RS-232C
connector.
The TV operates according to the received command and sends
a response message to the PC.
Do not send multiple commands at the same time. Wait until
the PC receives the OK response before sending the next
command.
Return codeCommand 4-digits Parameter 4-digits
Command format
Eight ASCII codes e CR
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0 – 9, g, blank, ?
C1 C2 C3 C4 P1 P2 P3 P4
Parameter
Input the parameter values, aligning left, and fill with blank(s)
for the remainder. (Be sure that four values are input for the
parameter.)
When the input parameter is not within an adjustable range,
ERR returns. (Refer to Response code format.)
0009
0
100
30 0055
NOTE
If an underbar (_) appears in the parameter column, enter a
space.
If an asterisk (*) appears, enter a value in the range indicated in
brackets under CONTROL CONTENTS.
When ? is input for some commands, the present setting value
responds.
Baud rate: 9,600 bps
Data length: 8 bits
Parity bit: None
? ????
Response code format
Normal response
OK
Stop bit: 1 bit
Flow control: None
Problem response (communication error or incorrect command)
ERR
Commands
Return code (0DH)
Return code (0DH)
P
I
I
I
I
D
D
C
C
I
I
I
I
I
I
I
I
I
I
I
I
I
A
A
A
A
A
A
A
V
V
H
H
V
V
C
C
P
P
W
W
W
W
W
W
W
W
W
W
M
M
M
M
A
A
A
A
A
O
O
O
O
O
O
O
T
T
T
D
D
POWER OFF
INPUT SWITCHING (Toggle)
TV (CHANNEL FIXED)
EXT1 5 (1 5)
1 to 5, ERR (TV)
TV DIRECT CHANNEL (1 99)
1 to 99
CHANNEL UP
CHANNEL DOWN
EXT1 (Y/C)
EXT1 (CVBS)
EXT1 (RGB)
0 to 2
EXT2 (Y/C)
EXT2 (CVBS)
EXT2 (RGB)
0 to 2
EXT3
EXT4 (RGB)
EXT4 (COMPONENT)
0 to 1
EXT5 (HDMI)
AV MODE SELECTION (Toggle)
STANDARD
SOFT
ECO
USER
DYNAMIC
1 to 5
VOLUME (0 60)
0 to 60
H-POSITION AV (מ10 ם10)
AV (מ10 ם10)
V-POSITION AV (מ20 ם20)
AV (מ20 ם20)
CLOCK (0 180)
0 to 180
PHASE (0 40)
0 to 40
WIDE MODE (Toggle)
NORMAL (AV)
ZOOM 14:9 (AV)
PANORAMA (AV)
FULL (AV)
CINEMA 16:9 (AV)
CINEMA 14:9 (AV)
NORMAL (PC)
FULL (PC)
1 to 10
MUTE (Toggle)
MUTE ON
MUTE OFF
1 to 2
SURROUND (Toggle)
SURROUND ON
SURROUND OFF
1 to 2
SOUND SELECT (ST/Bilingual/mono)
OFF
30 m
1 h 00 m
1 h 30 m
2 h 00 m
2 h 30 m
0 to 150
TEXT OFF
TEXT CHANGE (Toggle)
0 to 1
DIRECT PAGE JUMP (100 899)
100 to 899
POWER SETTING
INPUT SELECTION A
CHANNEL
INPUT SELECTION B
AV MODE
SELECTION
VOLUME
O
T
T
A
A
C
C
H
H
N
N
N
N
N
N
N
N
N
N
N
N
N
V
V
V
V
V
V
V
O
O
P
P
P
P
L
L
H
H
I
I
I
I
I
I
I
I
I
I
U
U
U
U
C
C
C
C
C
F
F
F
F
F
F
F
E
E
E
C
C
W
G
V
V
V
C
C
U
D
P
P
P
P
P
P
P
P
P
P
P
P
P
M
M
M
M
M
M
M
L
L
O
O
O
O
C
C
S
S
D
D
D
D
D
D
D
D
D
D
T
T
T
T
D
D
D
D
H
T
T
T
T
T
T
T
X
X
X
P
P
R
D
D
D
D
H
H
P
W
1
1
1
1
2
2
2
2
3
4
4
4
5
D
D
D
D
D
D
D
M
M
S
S
S
S
K
K
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
V
V
V
V
A
M
M
M
M
M
M
M
T
T
T
G
G
0
_
_
*
?
*
?
_
_
0
1
2
?
0
1
2
?
0
0
1
?
0
0
1
2
3
4
5
?
*
?
*
?
*
?
*
?
*
?
0
1
2
3
4
5
6
9
1
?
0
1
2
?
0
1
2
?
_
0
1
2
3
4
5
?
0
1
?
*
?
_
_
_
_
?
*
?
_
_
_
_
_
?
_
_
_
?
_
_
_
?
_
_
_
_
_
_
_
?
*
?
*
?
*
?
*
?
*
?
_
_
_
_
_
_
_
_
0
?
_
_
_
?
_
_
_
?
_
_
_
_
_
_
_
?
_
_
?
*
?
_
_
_
_
?
_
?
_
_
_
_
_
?
_
_
_
?
_
_
_
?
_
_
_
_
_
_
_
?
_
?
*
?
*
?
*
?
_
?
_
_
_
_
_
_
_
_
_
?
_
_
_
?
_
_
_
?
_
_
_
_
_
_
_
?
_
_
?
*
?
_
_
_
_
?
_
?
_
_
_
_
_
?
_
_
_
?
_
_
_
?
_
_
_
_
_
_
_
?
_
?
_
?
_
?
_
?
_
?
_
_
_
_
_
_
_
_
_
?
_
_
_
?
_
_
_
?
_
_
_
_
_
_
_
?
_
_
?
_
?
CONTROL ITEM
COMMAND PARAMETER
CONTROL CONTENTS
WIDE MODE
POSITION
SURROUND
MUTE
AUDIO CHANGE
SLEEP TIMER
TEXT
LC-32SA1E_GB_c 06.7.25, 11:36 AM22
23
Item
Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV
Function
B/G, I, D/K, L, LTV-Standard (CCIR)
Specifications
LCD panel
Number of dots 3,147,264 dots (1366 g 768 g 3 dots)
As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
NOTE
Refer to inside back cover for dimensional drawings.
VHF/UHF E2E69ch, F2F10ch, I21I69ch, IR AIR Jch
CATV Hyper-band, S1S41ch
TV-Tuning System Auto Preset 99 ch, Auto Label, Auto Sort
STEREO/BILINGUAL NICAM/A2
Receiving
Channel
Brightness 450 cd/m
2
Backlight life 60,000 hours (at Backlight Standard position)
Viewing angles H : 176° V : 176°
Audio amplifier 10W g 2
Speaker 130 mm g 60 mm
Terminals
9 pin MINI-DIN male connector
EXT 2
EXT 3 S-VIDEO (Y/C input), RCA pin (AV input)
Rear
RS-232C
UHF/VHF 75q Din type
SCART (AV input/output, Y/C input, RGB input, AV Link)
Antenna input
EXT 5 HDMI, Ø 3.5 mm jack (Audio input)
OSD language English/German/French/Italian/Spanish/Dutch/Swedish/Portuguese/Finnish/Turkish/Greek/
Russian/Polish
Power Requirement AC 220240 V, 50 Hz
Power Consumption
Weight
Appendix
26o LCD COLOUR TV,
Model: LC-26SA1E, LC-26SV1E
26o Advanced Super View &
BLACK TFT LCD
32o LCD COLOUR TV,
Model: LC-32SA1E, LC-32SV1E
32o Advanced Super View &
BLACK TFT LCD
13.0 kg (Display only),
15.2 kg (Display with stand)
17.9 kg (Display only),
20.1 kg (Display with stand)
102 W (0.9 W Standby)
(Method IEC60107)
125 W (0.9 W Standby)
(Method IEC60107)
OUTPUT RCA pin (Audio)
Headphones
Ø 3.5 mm jack (Audio output)
EXT 1 SCART (AV input, Y/C input, RGB input, TV output)
EXT 4 Ø 3.5 mm jack (Audio input), 15 pin mini D-sub (PC/Component)
Operating temperature 0°C to e40°C
The listed optional accessories are available for the LCD
colour TV. Please purchase them at your nearest shop.
Additional optional accessories may be available in near
future. When purchasing, please read the newest
catalogue for compatibility and check the availability.
Optional accessories
PC compatibility chart
NOTE
This TV has only limited PC compatibility, correct operation
can only be guaranteed if the video card conforms exactly
to the VESA 60Hz standard. Any variations from this
standard will result in picture distortions.
Resolution
Horizontal
Frequency
Vertical
Frequency
VESA
Standard
640 g 480VGA
VGA, SVGA and XGA are registered trademarks of
International Business Machines Co., Inc.
31.5 kHz 60 Hz
800 g 600SVGA
37.9 kHz 60 Hz
1024 g 768XGA 48.4 kHz 60 Hz
No.
Wall mount bracket
(LC-26SA1E, LC-26SV1E)
Part name Part number
1 AN-26AG1
Wall mount bracket
(LC-32SA1E, LC-32SV1E)
2 AN-37AG2
9 pin D-sub/MINI-DIN
conversion cable
3 AN-A1RS
LC-32SA1E_GB_c 06.7.25, 11:36 AM23
24
A. Information on Disposal for Users (private households)
1. In the European Union
Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!
Used electrical and electronic equipment must be treated separately and in accordance with legislation that
requires proper treatment, recovery and recycling of used electrical and electronic equipment.
Following the implementation by member states, private households within the EU states may return their used
electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local
retailer may also take back your old product free of charge if you purchase a similar new one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately
beforehand according to local requirements.
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment,
recovery and recycling and thus prevent potential negative effects on the environment and human health which
could otherwise arise due to inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.
For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you
dont purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or
www.sens.ch.
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged
for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your
local collection facilities.
For Spain: Please contact the established collection system or your local authority for take-back of your used
products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities and ask for the correct method of
disposal.
Attention: Your product
is marked with this
symbol. It means that
used electrical and
electronic products
should not be mixed
with general household
waste. There is a
separate collection
system for these
products.
LC-32SA1E_GB_c 06.7.25, 11:36 AM24
(672.2) / [806.0]
(672,2) / [806,0]
(136.5) / [137.4]
(136,5) / [137,4]
(350.5) / [389.0]
(350,5) / [389,0]
(577.4) / [700.0]
(577,4) / [700,0]
(501.0) / [577.0]
(501,0) / [577,0]
(560.0) / [636.0]
(560,0) / [636,0]
(325.3) / [394.6]
(325,3) / [394,6]
200.0 / 200,0
115.0 / 115,0
100.0 / 100,0
100.0 / 100,0
522.2
522,2
59.0
59,0
200.0 / 200,0
75.5
75,5
194.3
194,3
LC-26SA1E / LC-26SV1E / LC-32SA1E / LC-32SV1E
( ) : LC-26SA1E
LC-26SV1E
[ ] : LC-32SA1E
LC-32SV1E
: LC-26SA1E
LC-26SV1E
LC-32SA1E
LC-32SV1E
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should
the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or
ASA
and of the same rating
as above, which is also indicated on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the
mains plug and fit an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of
in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious
electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this product may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.
The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug.
Before replacing the plug cover make sure that:
If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.
The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
LC-26SA1E / LC-26SV1E LC-32SA1E / LC-32SV1E
LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISION COULEUR À ÉCRAN
À CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO
LC-26SA1E LC-26SV1E LC-32SA1E LC-32SV1E
Printed in Hungary
Gedruckt in Ungarn
Imprimé en Hongrie
Stampato in Ungheria
Gedrukt in Hongarije
Impreso en Hungría
TINS-C612WJZZ
OPERATION MANUAL / BEDIENUNGSANLEITUNG / MODE D’EMPLOI / MANUALE DI ISTRUZIONI / GEBRUIKSAANWIJZING / MANUAL DE MANEJO
LC
-
26SA1E
LC
-
26SV1E
LC
-
32SA1E
LC
-
32SV1E
C612WJZZ
1
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
NEDERLANDS
ESPAÑOL
06P08-HU-NG
PIN
Printed on environmentally friendly paper
Auf ökologischem Papier gedruckt
Imprimé sur papier écologique
Stampato su carta ecologica
Afgedrukt op ecologisch papier
Impreso en papel ecológico
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp lc 32 sa1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp lc 32 sa1 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info