Handleiding Sharp YC-QS254AE (pagina 17 van 232) (Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools)

787885

Verklein

Vergroot

Pagina terug

1/232

Pagina verder

EN – 14EN – 14

BEFORE USING THE OVEN

When the oven  rst plugged in, beep will sound and the display will show "1:00". Note that the clock does not have

to be set for the oven to operate correctly. To set the clock, follow the instructions in the “Setting the Clock” section of

this User Manual.

When new, the very  rst time the grill is used, smoke and odors will be given o . To avoid this happening when food is

being cooked, use the grill function without food for approx. 20 minutes.

• After opening and closing the door, the oven will enter the standby mode. If no buttons are press within 1 minute,

the display will remain on and the buttons will not operate. To enter standby mode again, open and close the door.

• During cooking, if the STOP/ECO button is pressed once, the cooking cycle will be paused. To restart cooking press

the START/QUICK START button. If the STOP/ECO button is pressed twice, cooking will be canceled.

• When programming the oven for a particular function and there is a pause between button presses of more than 30

seconds the oven will return to the standby mode.

• When a cooking cycle is completed, the display will show “End” and a tone will be heard every two minutes until a

button is pressed or the door is opened.

SETTING THE CLOCK

This oven has a clock which can be used in either 12- or 24-hour mode. To set the clock, follow the instructions as

below:

1. In standby mode, press and hold TIME/SET CLOCK button for at least 3 seconds to enter the clock setting mode.

2. Press the TIME/SET CLOCK button to select the 12- or 24-hour clock mode.

3. Rotate the JOG DIAL to set the hour. Press the TIME/SET CLOCK button to store.

4. Rotate the JOG DIAL to set the minutes. Press the TIME/SET CLOCK button to store and exit the clock setting

mode.

• It is not necessary to set the clock for the oven to work normally.

• While in the cook mode, press the TIME/SET CLOCK button to see the time of day (if set). The time of day will

change back to the cooking count down after 5 seconds. Note that the time of day can not be viewed if the kitchen

timer has been set.

EN – 15

MICROWAVE COOKING

To use the microwave function, follow the insturcitons given below:

1. In standby mode, press the MICROWAVE POWER button to select power level. Each time this button is pressed,

the display will show the microwave power level.

2. Once the desired microwave power level has been selected, rotate the JOG DIAL to select the time to cook.

3. Press the START/QUICK START button to start cooking.

4. When the cooking cycle is completed, the display will show “End” and a tone will be heard every two minutes until

a button is pressed or the door is opened.

Note that the table below is for guidance. Your oven has 10 microwave power levels. These are 10%, 20%, 30%, 40%,

50%, 60%, 70%, 80%, 90% and 100%. The actual wattage output can be calculated by multiplying the microwave

power by the percentage.

Microwave Cooking Guide:

Display Microwave

Power Suggested Use

P100 100% Use this setting for fast cooking or reheating e.g., for casseroles, hot beverages,

vegetables etc.

P-80 80%

For dense foods which require a long cooking time when cooked conventionally,

e.g., beef dishes. It is advisable to use this power setting to ensure the meat will be

tender.

P-60 60% Used for longer cooking of dense foods such as roast joints, meat loaf and plated

meals, also for sensitive dishes such as cheese sauce and sponge cakes.

P-40 40%

Defrost setting; select this power setting, to ensure that the dish defrosts evenly.

This setting is also ideal for simmering rice, pasta, dumplings and cooking egg

custard.

P-20 20% For gentle defrosting, e.g., cream gateaux or pastry.

• During cooking you can check the cooking power level by pressing and holing the MICROWAVE POWER button.

• The longest cooking time is 95 minutes.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Sharp YC-QS254AE Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info