679562
10
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
10
Presetting Stations Manually
You can preset up to 20 FM stations.
1. To store a preset, you must  rst be listening to the station that you
would like to save, press and hold the PROG button on the remote
control. The display will show “## Empty”, and the preset number will
ash.
2. Press the
/ or number (0~9) buttons to select the preset number.
3. Press the PROG button to store the station.
4. Repeat above steps 1 to 3 for each station you want to store in
memory with a preset number.
Show RDS information
RDS (Radio Data System) is a service that allows FM stations to show
additional information. If you tune to a RDS station, the station name
are displayed. When automatic programming is used, RDS stations are
programmed  rst.
1. Tune to a RDS station.
2. Press the INFO button repeatedly to scroll through the following
information (if available): Station name, PTY, RADIO TEXT, Frequency,
CLOCK INFO.
DAB Operation
To listen to the tuned stations press the / button. Each time you
press the
/ button, you will skip to the previous or next stored
station (including primary and secondary station). The unit will display the
station name.
Auto Scan
The auto scan will search for all DAB Band III channels. After the scan has
nished, the  rst alphanumerically found station will be automatically
selected.
1. Press the
/SCAN button on the remote control to start Auto Scan.
The display will show SCANNING“ and then SCAN ## that indicates
the progress of the scan and the amount of stations that have been
found so far.
2. Once the scan has  nished, the unit will display the total number of
stations have been found. All the stations that have been found will be
stored automatically.
To explore the found stations, press the
/ button to the selected
station.
Tip:
You may press and hold the button to clear the previously tuned stations
before running an auto scan.
Manual Tuning
As well as the auto tune function, you can manually tune the receiver. This
can help you when aligning your aerial or when adding stations that were
missed while auto tuning.
1. Press and hold the
/SCAN button to select Manual tune, the
display will now show Manual tune”.
2. Press the
/ button to cycle through the DAB channels, which
are frequency from 5A to 13F.
3. After your desired channel number is selected, press the
/SCAN
button to con rm. The display will show TUNING”.
4. The unit will start to scan.
Presetting Stations
You can store up to 20 of your favourite DAB stations to the memory. This
will enable you to access your favourite stations quickly and easily.
1. To store a preset, you must  rst be listening to the station that you
would like to save.
2. Press PROG button on the remote control. The display will show “##
Empty”, and the preset number will  ash.
3. Press
/ button on the remote control to select your desired station
preset number.
4. Press the PROG button to con rm your station, the display will show
SAVED”.
Recalling a Preset Station
1. Once you have saved a station to one of the preset buttons, you can
recall it by pressing the
/ button on the remote control to select
your desired preset number.
2. Preset number and station name will show on the display to indicate
the preset station you are listening to. Press
/SCAN button on the
unit or remote control to con rm.
Tip:
The stored stations will be saved into the memory and power o will not
erase it. Storing a new station in a preset location will erase the previously
stored station in that location.
DAB Display Modes
Every time you press the INFO button, the display will cycle through the
following display modes.
Station Name
When a radio station is received, the name
of that station will be displayed.
Ensemble Name
An Ensemble/multiplex is a collection of radio stations
that are bundled and transmitted on one frequency.
There are national and local multiplexes. Local ones
contain stations that are speci c to that area.
Tip: DAB – unlike normal radio, groups together several radio
stations and transmits them on one frequency.
Clock
The broadcaster (Radio station) provides clock
information automatically. If the information is not
available, the display will show the incorrect time.
Date
The broadcaster (Radio station) provides date
information automatically. If the information is not
available, the display will show the incorrect date.
DLS (Dynamic Label Segment)
Dynamic label segment is a scrolling message that the
broadcaster may include with their transmissions. The message
usually includes information, such as program details etc.
Programme Type
This describes the Style or genre of music that
is being broadcast e.g. Rock or Classical”.
Channel Number
DAB digital radio can be broadcast on a wide number of frequencies.
Frequency
The frequency of the present station will be displayed.
Stereo/Mono
The display will show the audio mode (Stereo
or Mono) of the current station.
Bitrate
The display will show the digital audio bit rate being received.
Signal Strength
The display will show a slide bar to indicate the signal strength, the
stronger the signal, the longer the bar will be from left to right.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp XL-B715D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp XL-B715D in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 8,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Sharp XL-B715D

Sharp XL-B715D Snelstart handleiding - Alle talen - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info