679562
7
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
EN
Connections
AUX socket
L
R
AB
a, Use a RCA to RCA audio cable (not included) to connect the TVs audio
output sockets to the AUX (R L) sockets on the unit.
b, Use a RCA to 3.5mm audio cable (not included) to connect the audio
player’s headphone socket to the AUX (R L) sockets on the unit.
Connect the (DAB/FM) Aerial
Connect one end of the aerial (included) to the ANT. socket at the rear of
the unit. Then position the aerial to obtain optimum reception.
IMPORTANT:
You may need to adjust the position of the aerial when tuning the radio
to receive the strongest signal.
Never leave the aerial where it can be pulled by children.
Connect to Power
EU
UK
Before connecting the AC power cord, ensure you have completed all
other connections.
Risk of product damage! Ensure that the power supply voltage corres-
ponds to the voltage printed on the back or the underside of the unit.
Connect the mains cable to the AC~ Socket of the unit and then into a
mains socket.
Set the Clock
Clock synchronization
In STANDBY mode, press and hold the /MONO/STEREO button on the
remote control to synchronize the clock. Press the
/ buttons on the
remote control or on the unit to switch the clock synchronization modes:
• RDS Only synchronize with the RDS radio station.
• OFF Turn o the clock synchronization function, clock needs to be
adjusted manually.
Then press the
button on the unit or the /SCAN on the remote
control to con rm.
Manual Setting the clock
--:--
00:00
1
1
1
1
Manual Setting the clock can only be done in STANDBY mode.
1. In STANDBY mode, press and hold the CLOCK button on the remote
control or on the unit until the hour digits are  ashing.
Press the
button on the unit or the /SCAN button
on the remote control to select 12/24 hour format.
2. Press the
/ buttons on the remote control or on the unit to
adjust the hour digits while  ashing, then press CLOCK button on the
remote control to con rm, then the minute digits will  ash.
3. Press the
/ buttons on the remote control or on the unit to
adjust the minute digits while  ashing, then press the CLOCK button
on the remote control to con rm. Each activated state will be cleared
if any buttons are not pressed within 15 seconds.
Set the Alarm Clock Timer
The clock time must be set to the current time and for the timer to operate
correctly
1. In STANDBY mode, press and hold the TIMER/SLEEP button on the
remote control until the hour digits  ash on the display.
2. Press the
/ buttons on the remote control or on the unit to
adjust the hour digits, and then press the TIMER/SLEEP button on the
remote control to con rm, the minute digits will  ash on the display.
3. Press the
/ buttons on the remote control or on the unit to
adjust the minute digits, and then press the TIMER/SLEEP button on
the remote control to con rm, the mode will  ash on the display.
4. Press the
/ buttons on the remote control or on the unit to
select:
FM (to wake to your selected FM Radio Station)
DAB (to wake to your selected DAB Radio Station)
BUZZER (to wake to a buzzer sound)
DISC (to wake to your DISC music)
USB (to wake to your USB music)
5. Press the TIMER/SLEEP button on the remote control to con rm, the
display will show the volume level.
6. Press the
/ buttons on the remote control or on the unit to
adjust the volume, and then press the TIMER/SLEEP button on the
remote control to con rm, the display will show the current time and
will appear from the display.
Tips:
Each set state will be cleared if any button is not pressed within 15
seconds.
The FM tuner timer will show the last tuned station.
Activate and Deactivate the Alarm Timer
Press the TIMER/SLEEP button on the remote control to view the alarm
settings or activate the alarm.
To deactivate the alarm, press the TIMER/SLEEP two times. The
will
disappear from the display on the front of the unit.
To activate the alarm, press the TIMER/SLEEP two times. The
will
show from the display on the front of the unit.
Stop Alarm Ring
When the alarm rings, press the power button on the remote control or
on the unit. The alarm stops but the alarm settings remain.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp XL-B715D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp XL-B715D in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 8,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Sharp XL-B715D

Sharp XL-B715D Snelstart handleiding - Alle talen - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info