List of Setup Menu Items
AQUOS LINK setup
Menu item name Setup
AQUOS LINK control On, Off
Set it to "Off" if the power supply is turned on or the channel changes
automatically when connecting a device that is not AQUOS LINK-enabled.
Auto power on Yes, No
Set it to turn on automatically once an AQUOS LINK-enable device is
operated.
Select AQUOS LINK
device
Select an AQUOS LINK device.
Selecting
channel
key
INPUT1 Auto, On, Off
When you set "Selecting channel key" to "On", you can perform AQUOS
recorder operation with the remote control.(5-13 page)
For "Auto", a device operates in the same manner as it does when this is set
to "Off". Only when there is a request from a connected device however, it will
operate in the same manner as it would when this is set to "On".
INPUT2 Auto, On, Off
INPUT3 Auto, On, Off
INPUT4 Auto, On, Off
Audio return channel Auto, Off
"ARC (Audio Return Channel)" is the function to transmit sound from the
monitor to the AV amplifier, etc. using an HDMI cable. If you set "Audio return
channel" to "Auto", you can connect to an ARC compatible audio device with
a HDMI cable. This function is available only when it is connected to INPUT 2
terminal.
You can also setup from the Application menu (page 3-44)
