33883

Sharp LC30HV4U Handleiding

1
Verklein
Vergroot
Pagina terug
1/86
Pagina verder
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA DE
CRISTAL LIQUIDO
TELEVISOR DE CRISTAL LÍQUIDO
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
MANUAL DE OPERAÇÃO
LC
-
30HV4U
ENGLISH
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
LC-30HV4U
ESPAÑOL
FRANÇAIS
Printed on post-consumer recycled paper.
Imprimé sur du papier recyclé.
Impreso en papel reciclado.
Impresso em papel reciclado pós utilização.
Printed in Japan
Imprimé au Japon
Impreso en Japón
Impresso no Japão
TINS-A530WJZZ
03P02-JKG
PORTUGUÊS
OPERATION MANUAL
MANUAL DE OPERACIÓN
MODE D’EMPLOI
MANUAL DE OPERAÇÃO
A
ENGLISH
LC-30HV4U
LIQUID CRYSTAL TELEVISION
ENGLISH
OPERATION MANUAL
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrow-head
symbol, within an equilateral
triangle, is intended to alert the user
to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within a
triangle is intended to alert the user
to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the product.
IMPORTANT:
To aid reporting in case of loss or theft, please record
the TV’s model and serial numbers in the space
provided. The numbers are located at the rear of the
TV.
Model No.:
Serial No.:
CAUTION:
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use
shielded cables and connectors for connections.
2
IMPORTANT INFORMATION
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly
approved by the manufacturer could void the user’s authority to operate this equipment.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the
National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.”
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these
materials may be regulated due to environmental considerations. For disposal or recycling information, please contact
your local authorities or the Electronic Industries Alliance: www.eia.org
CAUTION:
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR
TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS
DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE
RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE
MANUFACTURER’S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING
ACCESSORIES RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART
COMBINATION SHOULD BE MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND
UNEVEN SURFACES MAY CAUSE THE PRODUCT AND CART COMBINATION TO OVERTURN.
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
DECLARATION OF CONFORMITY
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-30HV4U.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
TEL: 1-800-BE-SHARP
For Business Customers: URL
http://www. sharpusa. com
3
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years
of trouble-free operation of your product, please read the Important Safety Precautions carefully
before using this product.
IMPORTANT SAFETY PRECAUTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if
improperly handled. This product has been engineered and manufactured with the highest priority on safety. However,
improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following
instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of
your Liquid Crystal Television, please read the following precautions carefully before using the product.
• Read Instructions — All the safety and operating instructions should be read before the product is operated.
• Retain Instructions — The safety and operating instructions should be retained for future reference.
• Heed Warnings — All warnings on the product and in the operating instructions should be adhered to.
• Follow Instructions — All operating and use instructions should be followed.
• Attachments — Do not use attachments not recommended by the product manufacturer as they may cause
hazards.
• Power Sources — This product should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to your home, consult your product dealer or local power
company. For products intended to operate from battery power, or other sources, refer to the operating
instructions.
• AC Cord Protection — AC cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
• Overloading — Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
• Object and Liquid Entry — Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any
kind on the product.
• Servicing — Do not attempt to service this product yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
• Damage Requiring Service — Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment of
other controls may result in damage and will often require extensive work by a qualified technician to
restore the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance – this indicates a need for service.
• Replacement Parts — When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
• Safety Check — Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks to determine that the product is in proper operating condition.
• Wall or ceiling mounting — When mounting the product on a wall or ceiling, be sure to install the product
according to the method recommended by the manufacturer.
• Polarization — The product may be equipped with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the AC outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
• Unplug the AC cord from the AC outlet before installing the speakers.
4
IMPORTANT SAFETY PRECAUTIONS
• Cleaning — Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
• Water and Moisture — Do not use this product near water – for example, near a bath tub,
wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the
like.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the
product on an unstable base can cause the product to fall, resulting in serious personal
injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the product. When mounting the product on
a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware
recommended by the manufacturer.
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do
not cover or block these vents and openings since insufficient ventilation can cause
overheating and/or shorten the life of the product. Do not place the product on a bed, sofa,
rug or other similar surface, since they can block ventilation openings. This product is not
designed for built-in installation; do not place the product in an enclosed place such as a
bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are
followed.
• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when
the product is dropped or applied with impact. Be careful not to be injured by broken glass
pieces in case the panel breaks.
• The Liquid Crystal panel is a very high technology product with 2,949,120 thin film transistors, giving you fine picture
details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note
that this does not affect the performance of your product.
Precautions when transporting the display
When transporting the display, never carry it by holding onto the speakers. Be sure to always carry the display by two
people holding it with two hands-one hand on each side of the display.
• Heat — The product should be situated away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that produce heat.
• A product and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the product and cart combination to overturn.
5
IMPORTANT SAFETY PRECAUTIONS
• Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna
system is grounded so as to provide some protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
NEC —NATIONAL ELECTRICAL CODE
• Lighting — For added protection for this television equipment during a lightning
storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna. This will prevent damage to the
equipment due to lightning and power-line surges.
• Power Lines — An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power lines or circuits as contact
with them might be fatal.
6
Contents
IMPORTANT INFORMATION ………………………1
DEAR SHARP CUSTOMER …………………………3
IMPORTANT SAFETY PRECAUTIONS …………… 3
Contents ………………………………………………6
Supplied accessories ………………………………7
Preparation ……………………………………………8
Where to place the System ……………………… 8
Setting the System ………………………………9
Setting the Display on the wall ……………… 11
Setting the AVC System with the stand ……… 11
Inserting the batteries ………………………… 12
Using the remote control unit ………………… 12
Cautions regarding remote control unit … 12
Part names ………………………………………… 13
Display ………………………………………… 13
AVC System …………………………………… 14
Remote control unit …………………………… 15
Watching TV ……………………………………… 16
Antennas ……………………………………… 16
Cable converter/VCR connection …………… 16
Outdoor antenna connection ………………… 18
Connecting the AC cord ……………………… 19
Turning on the power ………………………… 20
Turning off the power ………………………… 20
Initial setup ……………………………………… 21
Simple button operations
for changing channels …………………… 22
Simple button operations
for changing volume/sound ……………… 23
Using FRONT SURROUND
on the remote control unit ………………… 24
Setting MTS/SAP stereo mode ……………… 24
Basic adjustment settings ……………………… 25
AV input mode menu items …………………… 25
PC input mode menu items …………………… 25
EZ setup ………………………………………… 26
Channel setup ………………………………… 27
Language setting ……………………………… 30
Picture adjustments …………………………… 31
C.M.S. (Color Management System) …… 32
Color temperature ………………………… 33
Black ……………………………………… 33
3D-Y/C ……………………………………… 34
Monochrome ……………………………… 34
Film mode (3:2 pull-down) ……………… 35
I/P Setting ………………………………… 35
Sound adjustment ……………………………… 36
Power control …………………………………… 37
Power control for AV source ……………… 37
Power control for PC source ……………… 39
Using external equipment ……………………… 40
Watching a DVD image ……………………… 41
Connecting a DVD player ………………… 41
Displaying a DVD image ………………… 41
Watching a VCR image ……………………… 42
Connecting a VCR ………………………… 42
Displaying a VCR image ………………… 42
Watching broadcasts via a Digital TV tuner … 43
Connecting a Digital TV tuner …………… 43
Displaying broadcasts
via a Digital TV tuner ………………… 43
Enjoying a game console
or viewing camcorder images …………… 44
Connecting a game console
or camcorder ………………………… 44
Displaying an image of the game
console or camcorder ……………… 44
Viewing an image from a PC ………………… 45
Connecting a PC ………………………… 45
Displaying an image from a PC ………… 45
Removing the speakers ……………………… 46
Useful adjustment settings ……………………… 47
Image position (AV input mode only) ……… 47
Moving the picture on the screen …………… 48
Auto Sync. adjustment (PC input mode only) … 49
Fine Sync. adjustment (PC input mode only) … 49
Input signal source …………………………… 50
Selecting Stretch Mode display
(AV input mode only) ……………………… 51
Picture flip ……………………………………… 52
AV MODE ……………………………………… 53
View modes for 4:3 Programs ………………… 53
View mode (for PC input mode) ……………… 54
Input signal (for PC input mode) …………… 55
Noise clean …………………………………… 55
Sleep timer ……………………………………… 56
Audio out ……………………………………… 56
Cool climate …………………………………… 57
Closed caption ………………………………… 58
Secret number setting for parental control
(AV input mode only) ……………………… 59
Parental control (setting V-CHIP level) ……… 61
How to temporarily release
the V-CHIP BLOCK ……………………… 65
Reactivating the temporarily released
V-CHIP BLOCK …………………………… 65
Other viewing options …………………………… 66
Twin picture functions ………………………… 66
Learning remote control function …………… 67
Using the TV remote control unit
to control other devices…………………… 69
Appendix ………………………………………… 75
Troubleshooting ………………………………… 75
PC compatibility chart ………………………… 76
RS-232C port specifications ………………… 77
Specifications ………………………………… 79
Optional accessory …………………………… 79
Dimensional drawings …………………………… 80
7
Supplied accessories
Make sure the following accessories are provided with the product.
LC-30HV4U
Remote control unit (g1) “AA” size Alkaline battery (g2)
Stand unit (for AVC System) (g1) System cable (g1)
Cable clamp (g1)
Operation manual (g1)
AC cord (g2)
RRMCGA037WJSA
Page 12
UBATA0018CEZZ
Page 12
LHLDW0110CEZZ
Page 10
QCNW-6117CEZZ
Page 9
QACCD3097CEPZ
Page 9
Stand (g1)
Stand cushion (g4)
Stand spacer (g4)
Stand screw (g2)
Page 11
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
؀
؁
FREEZE
MODE
VOL CH
MUTE
MENU TV/SAT/DVD
FAVORITE CH
RECEIVER
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
RETURN
MENU
POWER
SET/
ENTER
MENU
GUIDE
INPUTPOWER VOL
؁
VOL
؀
INFO
VIEW
SLEEP LEARN
EDIT/
ENT
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
100
0
FLASHBACK
RF cable (g1)
TINS-A530WJZZ
QCNW-A342WJZZ
Pages 17 and 18
GDAI-A059WJSA
PSPAHA101WJZZ
GLEGGA013WJZZ
XBPSN40P14JS0
NOTE
• Always use the AC cord supplied with the Liquid Crystal Television and the one supplied with the AVC System for each
respective unit.
• AC cords enclosed in this product are for 110-125V. In using it on the 125-240V AC, please consult to the following.
SHARP ELECTRONICS CORPORATION
1300 Naperville Drive, Romeoville, Illinois 60446-1091, U.S.A. TEL: 630-226-2400
8
Setting the System in place
Handling the Display
CAUTION
• The Display is very heavy. Move it with two or more people.
• Do not remove the stand from the Display unless using an
optional bracket to mount it.
• When moving, put your hands on the Display, but never on the
Display speakers.
• Keep enough space above and behind the Display.
Handling the AVC System
CAUTION
• Do not put a VCR or other device on the AVC System.
• Keep enough space above and on the sides of the AVC System.
• Do not block the ventilation openings on the top and left side,
and the exhaust fan on the right side.
• Do not spread a thick cloth beneath the AVC System, or cover it
with one, as this can cause overheating and result in malfunction.
Preparation
Where to place the System
“System” means the Display and AVC System. First select the location where to place the System.
Selecting the location of the System
• Select a place with no direct sunlight and good ventilation.
• The Display and the AVC System are connected by the system cable.
(See page 9 for details.)
5 cm or more
5 cm or more
5 cm or more
5 cm or more
10 cm
or more
Keep enough space
System cable
AVC System
Display
There is an exhaust
fan on the right side.
1
2
4 inches
(10 cm)
or more
2 inches (5
cm) or more
2 inches (5
cm) or more
on both sides
CAUTION
Adjust the screen with both
hands. Put one hand on the
Display and tilt the screen
while steadying the stand
with your other hand.
You can adjust the screen
vertically up to 10 degrees
forward or 8 degrees back-
ward, or rotate 10 degrees
horizontally.
9
DISPLAY INPUT2 DISPLAY INPUT1
System cable
AVC System (rear view)
AC cord
Display (rear view)
AC cord
System cable
(GRAY)
Connect the plug firmly
until the hooks on both
sides click.
(WHITE)
Connect the plug into the
terminal and secure it by
tightening the thumb screws.
(GRAY) (WHITE)
Setting the System
After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the
cable clamp for bundling the cables.
Preparation
Press down the two
upper hooks to remove
the cover toward you.
Connecting the system cable and the AC cord to the Display
1
2
3
Removing the terminal cover
Connecting the system cable and the AC cord to the AVC System
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
10
Preparation
4
5
6
Attaching the clamp to the leg of the Display
Bundling the cables with the clamp
Closing the terminal cover
Display (rear view)
Cables come out from
the small opening.
Setting the System (continued)
11
Preparation
Setting the Display on the wall
Setting the AVC System with the stand
CAUTION
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
1
Using an optional bracket to mount the Display
• You can ask a qualified service personnel about using an optional AN-37AG1 bracket to mount the Display
to the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Vertical mounting Angular mounting
Hanging on the wall
AN-37AG1 wall mount bracket. (See the bracket instructions for details.)
How to install the AVC System vertically using the stand unit.
• Use the supplied stand unit for installing the AVC System vertically in an upright position.
Stick each spacer to the
stand as shown.
Peel each spacer
away from the
paper and attach
to the four bulging
areas on the stand.
2
Attach each cushion to
the stand as shown.
3
Fit the stand to the AVC
System.
Peel each cushion
away from the
paper and attach
to the four areas at
the bottom.
Insert the stand into the AVC
System, making sure that the
thick and thin bulges of the
stand align with the big and
small holes on the AVC
System.
Stand
spacer
Bulge
Stand cushion
Thin bulge
Thick
bulge
Big hole
Small
hole
4
Attach the stand using the
stand screws as shown.
Stand screw
The AVC System installed
vertically with the stand.
NOTE
• When mounting the AVC System vertically, always use the supplied stand. Be careful not to block vent holes when
standing up directly on the floor or a flat surface as this can result in equipment failure.
Attaching point
Attaching point
Bulge
12
+
+
_
_
1 Open the battery cover. 2 Insert two “AA” size Alkaline
batteries (supplied with the
product).
• Place the batteries with their terminals
corresponding to the (e) and (f)
indications in the battery compartment.
3 Close the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not use manganese batteries. When you replace the batteries, use alkaline ones.
• Place the batteries with their terminals corresponding to the (e) and (f) indications.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
chemical leakage in old batteries.
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries can cause a rash. If you
find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove batteries from it.
Inserting the batteries
If the remote control fails to operate Liquid Crystal Television functions, replace the batteries in the remote
control unit.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor on
the Display. Objects between the remote control unit and the remote control
sensor may prevent proper operation.
Cautions regarding remote control unit
• Do not expose the remote control unit to shock.
In addition, do not expose the remote control unit to liquids, and do not place
in an area with high humidity.
• Do not install or place the remote control unit under direct sunlight.
The heat may cause deformation of the remote control unit.
• The remote control unit may not work properly if the remote control sensor on
the Display is under direct sunlight or strong lighting. In such cases, change
the angle of the lighting or the Display, or operate the remote control unit
closer to the remote control sensor.
Preparation
13
Part names
OPC indicator*
POWER indicator
MAIN POWER
button
OPC sensor
SLEEP timer indicator
Display
POWER button
INPUT
button
VOLUME buttons
(VOLl/k )
CHANNEL buttons
(CHs/r)
Remote control sensor
*OPC: Optical Picture Control
(See pages 37 and 39.)
14
Part names
Front view
CLEAR*
MAIN POWER button
INPUT 4 terminal (S-VIDEO)
INPUT 4 terminal (VIDEO)
PC INPUT terminal (AUDIO)
INPUT 4 terminals (AUDIO L/R)
PC INPUT terminal (ANALOG RGB)
AVC System
Rear view
INPUT 1 COMPONENT
video terminals (Y, PB, PR)
INPUT 3 COMPONENT
video terminals (Y, P
B, PR)
MONITOR OUTPUT terminal
(S-VIDEO)
DISPLAY OUTPUT 2 terminal
DISPLAY OUTPUT 1 terminal
AC INPUT terminal
RS-232C
terminal
MONITOR OUTPUT
terminal (VIDEO)
MONITOR OUTPUT terminals (AUDIO L/R)
Antenna (A) input terminal
Antenna (B)
input terminal
Antenna (A) output
terminal
DVI-DIGITAL
INPUT
terminal
INPUT 3 terminal (S-VIDEO)
INPUT 3 terminal (VIDEO)
INPUT 3 terminals (AUDIO L/R)
INPUT 1 terminal (S-VIDEO)
INPUT 1 terminal
(VIDEO)
INPUT 1 terminals
(AUDIO L/R)
INPUT 2 terminal (S-VIDEO)
INPUT 2 terminal (VIDEO)
INPUT 2 terminals
(AUDIO L/R)
How to open the door.
STANDBY/ON indicator
* If the AVC System is switched on but it does not appear to be operating correctly, it may need resetting. In this
case, press CLEAR, shown in the diagram, lightly with the end of a ballpoint pen or other pointed object.
This will reset the System as shown below.
• AV MODE resets to USER
• TV channel returns to initial channel setting (Air:2ch, Cable:1 or 2ch)
• Twin picture resets to normal
• Audio setting initializes
• SRS resets to off
• Image position initializes
NOTE
• Pressing CLEAR will not work if the System is in standby mode (indicator lights red).
• Pressing CLEAR will not delete channel preset or secret number. See page 60 for clearing the secret number when you
know it. See page 82 for initializing to the factory preset values when you forget your secret number.
Headphone
(When connecting headphones, the sound from the
speakers is muted.)
DC OUTPUT terminal
(Terminal for expanded functionality
in the near future.)
15
Part names
Remote control unit
NOTE
• When using the remote control unit, point it at the Liquid
Crystal Television.
• See pages 67 to 74 for operating buttons not listed on
this page.
*
is a trademark of SRS Labs, Inc.
FOCUS technology is incorporated under license from
SRS Labs, Inc.
1TV POWER: Switch the Liquid Crystal Television power
on or off. (See page 20.)
2 FRONT SURROUND: Set SRS* and FOCUS* Sound
System mode. (See page 24.)
3 AV MODE: Select an audio or video setting. (See
page 53.) (AV mode: STANDARD,
DYNAMIC, MOVIE, GAME, USER. PC
mode: STANDARD, USER.)
4 VIEW MODE: Select the screen size. (See pages 53
and 54.)
5 DISPLAY: Display the channel information.
6 SLEEP: Set the sleep timer. (See page 56.)
7 FLASHBACK: Return to the previous channel or input
external mode. (See page 22.)
8VOL
kk
kk
k/
ll
ll
l: Set the volume. (See page 23.)
9 MENU: Display the menu screen.
10 MENU RETURN: Return to the previous menu screen.
11 a/b/c/d: Select a desired item on the screen.
12 ANT-A/B: Select between ANT-A and B to watch
broadcasts via the two tuners.
13 INPUT: Select a Liquid Crystal Television input source.
(TV, INPUT 1, INPUT 2, INPUT 3, INPUT 4, PC)
(See pages 41–45 and 50.)
14
: When pressed all buttons on the remote control unit
will light. The lighting will turn off if no operations
are performed within about 5 seconds. This button
is used for performing operations in dark places.
15 MTS: Select the MTS/SAP. (See page 24.)
16 CC: Display captions during closed-caption source.
(See page 58.)
17 TWIN CH buttons
TWIN PICTURE: Set the twin picture mode.
Press again to return to normal
screen. (See page 66.)
FREEZE: Set the still image. Press again to return to
normal screen. (See page 66.)
SELECT: Select the active screen. (See page 66.)
SUB INPUT: Select an input source of sub screen.
(See page 66.)
TWIN CH a/b: Select the channel of sub screen.
(See page 66.)
18 0 – 9: Set the channel.
19 100 ENT: Select the three digit mode. Execute a
command of the channel.
20 CH
aa
aa
a/
bb
bb
b: Select the channel.
21 MUTE: Mute the sound. (See page 23.)
22 SET/ENTER: Execute a command.
23 FAVORITE CH
A, B, C, D: Select four preset favorite channels in four
different categories. (See page 29 for details.)
When viewing via ANT-A: up to 16 channels can be
assigned in A, B, C and D.
When viewing via ANT-B: up to 16 channels can be
assigned in A, B, C and D.
With ANT-A and B combined, you can preset up to 32
favorite channels in advance.
While watching, you can toggle the selected channels
by pressing A, B, C and D.
24 LED for transmission confirmation
25 Mode switch: (See pages 67 to 74 for details.)
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
؀
؁
FREEZE
MODE
VOL CH
MUTE
MENU TV/SAT/DVD
FAVORITE CH
RECEIVER
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
RETURN
MENU
POWER
SET/
ENTER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
VIEW
SLEEP LEARN
EDIT/
ENT
FLASHBACK
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
100
0
POWER
16
17
18
19
20
21
22
24 25
23
3
2
1
4
5
6
7
8
9
10
11
12 13
14
15
16
Watching TV
Simple operations for watching a TV program
Antennas
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections
that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector,
plug it into the antenna terminal at the rear of the AVC System.
NOTE
• The antenna and the cable converter cannot be connected at the same time.
1. A 75-ohm system is generally a round cable with F-type
connector that can easily be attached to a terminal without
tools (not supplied).
2. A 300-ohm system is a flat “twin-lead” cable that can be
attached to a 75-ohm terminal through a 300/75-ohm
adapter (not supplied).
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
• Be sure to connect the antenna or the cable converter as follows. Signal reception may fail if improperly connected.
• Be sure to remember what kind of connection is made with your System.
• The connection type will determine whether to select “Air” or “Cable” for both ANT-A and B when configuring “Air/Cable”
settings.
Cable converter/VCR connection
A-1. Connecting with Converter/Descrambler Box and VCR
NOTE
• Be sure to remember what kind of connection is made with your System.
• Shown here is the preferred method of connecting a VCR and CATV Converter to your TV if you are in an area with good
signal reception. This way you can view either TV programs or VCR tapes and not be concerned about the position of the
VCR’s TV/VCR switch and you can enjoy stereo tape playback from a stereo VCR.
• If your VCR has an S-Video terminal, S-video connection is recommended.
S-VIDEO
Coaxial Antenna Cable (commercially available)
VCR
Video Cable (commercially available)
Audio Cable (commercially available)
S-video Cable (commercially available)
Coaxial Antenna Cable (commercially available)
Cable lead-in
Cable TV converter
(not supplied)
OUT IN
2-way
signal
splitter
(not
supplied)
VIDEO AUDIO OUT IN
Coaxial Antenna Cable (commercially available)
Rear Terminals
17
Watching TV
A-2. Connecting with cable converter using AUX terminals for audio and video output.
(If your cable TV converter has both RF OUTPUT and AUX terminals, it is recommended to connect it as
shown in example A-1.)
Rear Terminals
S-VIDEO
Coaxial Antenna Cable (commercially available)
VCR
Cable lead-in
OUT IN
VIDEO AUDIO OUT IN
RF
Cable
(Supplied)
VIDEO AUDIO
Cable TV converter
(not supplied)
Video Cable
(commercially available)
Audio Cable
(commercially available)
S-video Cable (commercially available)
2-way
signal
splitter
(not
supplied)
NOTE
• Be sure to remember what kind of connection is made with your System.
• Shown here is the preferred method of connecting a VCR and CATV Converter to your TV if you are in an area with good
signal reception. This way you can view either TV programs or VCR tapes and not be concerned about the position of the
VCR’s TV/VCR switch and you can enjoy stereo tape playback from a stereo VCR.
• If your VCR has an S-Video terminal, S-video connection is recommended.
B. Connecting with Converter/Descrambler Box without VCR
NOTE
• Be sure to remember what kind of connection is made with your System.
• Switching between Antenna-A and Antenna-B is possible by pressing the ANT-A/B button on the remote control.
• A good color picture depends on a good TV signal. So does good multi-channel sound. Ask your dealer for advice on
how to install your outdoor antenna to receive the best possible signal.
• If you subscribe to Cable TV or have a central antenna for your building, you may not need an outdoor antenna.
Coaxial Antenna Cable (commercially available)
Cable lead-in
OUT IN
Coaxial Antenna Cable (commercially available)
Coaxial Antenna Cable (commercially available)
Rear Terminals
2-way
signal
splitter
(not
supplied)
Cable TV converter
(not supplied)
18
Watching TV
C. Connecting Antenna Cable with VCR
NOTE
• Be sure to remember what kind of connection is made with your System.
• Shown here is the preferred method of connecting a VCR to your TV if you are in an area with good signal reception. This
way you can view either TV programs or VCR tapes and not be concerned about the position of the VCR’s TV/VCR switch
and you can enjoy stereo tape playback from stereo VCR.
• If your VCR has an S-Video terminal, S-video connection is recommended.
• If your lead cable is a 300-ohm twin-lead cable or UHF/VHF separate cable, use a 300/75-ohm adapter or combiner
(output side is 75-ohm coaxial) to connect to the TV (see below).
Cable without a CATV
converter
Combination VHF/
UHF antenna
Separate VHF/UHF
antenna
Connecting Antenna Cable
Outdoor antenna connection
F-type connector
75-ohm coaxial cable
When connecting the RF cable to the TV set,
do not tighten F-type connector with tools.
If tools are used, it may cause damage to your
TV set.
(The breaking of internal circuit, etc.)
F-type connector should be finger-tightened only.
NOTICE
S-VIDEO
VCR
VIDEO AUDIO OUT IN
Coaxial Antenna Cable
(commercially available)
Video Cable (commercially available)
Audio Cable (commercially available)
S-video Cable (commercially available)
Cable lead-in
Coaxial Antenna Cable (commercially available)
Rear Terminals
RF Cable
(Supplied)
2-way
signal
splitter
(not
supplied)
300-ohm twin-lead (flat)
300-ohm twin-lead
75-ohm coaxial cable (round)
75-ohm coaxial cable
Cable TV lead-In
or
IN OUT
300-ohm
twin-lead
VHF
ANTENNA
UHF
ANTENNA
Combiner
(commercially
available)
or
Coaxial cable
(commercially
available)
Home Antenna
terminal (75-ohm)
300/75-ohm adapter
(commercially available)
RF Cable (Supplied)
Cable converter/VCR connection (continued)
19
Watching TV
Connecting the AC cord
Connect the AC cords after all component connections have been completed.
Display (rear view)
AC cord
AC cord
AVC System (rear view)
NOTE
• Always turn off the main power of the Display and AVC System when connecting the AC cords.
• Disconnect the AC cords from the AC outlet, Display and AVC System when the System is not going to be used for a long
period of time.
HEADPHONE
AC INPUT
DISPLAY INPUT2 DISPLAY INPUT1
20
Watching TV
Display
AVC System
POWER button
MODE
AV
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
FREEZE
MODE
VIEW
SLEEP LEARN
EDIT/
ENT
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
100
0
Turning on the power
STANDBY/ON indicatorMAIN
POWER
MAIN POWER
POWER indicator
1
2
3
Press MAIN POWER on the Display.
• The POWER indicator on the Display flashes red.
Press MAIN POWER on the AVC System.
• The System turns the power on.
• The POWER indicator on the Display lights up green and the
STANDBY/ON indicator on the AVC System lights up green.
• If the STANDBY/ON indicator on the AVC System and the POWER
indicator on the Display still light up red, press TV POWER on
the remote control unit or MAIN POWER on the AVC System to
turn the System on.
First time turning on the AVC System
Press MAIN POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System lights up red.
1
2
Press MAIN POWER on the Display.
• The System turns the power on.
• The POWER indicator on the Display lights up green and the
STANDBY/ON indicator on the AVC System lights up green.
• If the STANDBY/ON indicator on the AVC System and the
POWER indicator on the Display still light up red, press TV
POWER on the remote control unit or POWER button on the
Display to turn the System on.
NOTE
• The initial setup starts when the System powers on for the first time. If the
System has been turned on before, the EZ setup will not be invoked. See
page 26 to try EZ setup from the Setup menu.
Turning off the power
1
2
Press TV POWER on the remote control unit or
POWER button on the Display.
• The System enters standby mode and the image on the screen
disappears.
• Both the STANDBY/ON indicator on the AVC System and the
POWER indicator on the Display change from green to red.
Press MAIN POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System turns off and
the POWER indicator on the Display flashes red.
Press MAIN POWER on the Display.
• The POWER indicator on the Display gradually turns off.
NOTE
• If you are not going to use this System for a long period of time, be sure to
remove the AC cords from the power outlet.
• When the STANDBY/ON indicator lights up red, it takes about 10 to 15
seconds for the indicator to turn off if MAIN POWER on the AVC System is
turned “Off” or the AC cord is unplugged from the AC outlet.
Off
Flashing red
Red
Green
Display status indicator
Power off
AVC System does not turn on or its AC cord is disconnected.
The System is in standby mode.
The System is on.
AVC System status indicator
Power off
Only the AVC System is in standby mode or the System is in standby mode.
The System is on.
Off
Red
Green
21
Watching TVWatching TV
Press a/b to select the desired language
listed on the screen, and then press SET/
ENTER.
Press c/d to select “Air” or “Cable” for ANT-
A, then press a/b to move down.
Press c/d to select “Air” or “Cable” for ANT-
B.
Press SET/ENTER to enter the setting.
• This operation makes the System search for
both ANT-A and B.
Initial setup
When you turn on the System for the first time, it will automatically memorize the broadcasting channels where
you live. Perform the following steps before you press TV POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 12.)
2. Connect the antenna cable to the AVC System. (See pages 16 to 18.)
3. Plug in the AC cord to the AC outlet. (See page 19.)
Channel search
Channel auto search makes the System look for all
channels viewable in the set area.
3
1
2
Setup
EZ Setup - Language
English
Español
Français
Setup
EZ Setup - Air/Cable
ANT-A Air
ANT-B
Cable
Air Cable
CH Search
ANT-A [ ]2Air
CH Search
ANT-B [ ]2Cable
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
Setup
EZ Setup - Air/Cable
ANT-A Air
ANT-B
Cable
Air Cable
Example
2
ANT-A
Noise Clean
Language setting
Select from among 3 languages: English, French and
Spanish.
Antenna setting
NOTE
• Make sure what kind of connection is made with your
System when selecting “Air” or “Cable” for both ANT-A
and B.
Example
NOTE
• Make sure what kind of connection is made with your
System when selecting “Air” or “Cable” for both ANT-A
and B.
• If no channel is found, make sure what kind of connection
is made with your System and try EZ setup again (see
page 26).
• The illustrations and on-screen displays in this operation
manual are for explanation purposes and may vary slightly
from the actual operations.
22
Watching TV
Simple button operations for
changing channels
You can change channels in several ways.
NOTE
• While watching a broadcast, press ANT-A/B to view the
image received from the other tuner.
Using CHa/b
on the remote control unit
• Press CH
aa
aa
a to increase the channel number.
• Press CH
bb
bb
b to decrease the channel number.
NOTE
• CH s/r on the Display operates the same as CH
aa
aa
a/
bb
bb
b
on the remote control unit.
Changing channels with CH a/b on the
remote control unit or CH s/r on the
Display
Air: Press CH a and the channel change in the
order shown below:
2s3s...s68s69s2s3...
Press CH b and the channel change in the order
shown below:
3s2s69s68s...s3s2...
Cable:Press CH a and the channel change in the
order shown below:
1s2s3s...s125s1s2s3...
Press CH b and the channel change in the order
shown below:
3s2s1s125s...s3s2s1s...
Using 0 – 9 and 100 on the remote control
unit
Select the channels directly by pressing buttons 0 to
9 and 100.
• The System allows you to select up to 125 channels
(1 to 125). To select a channel, enter a 2 or 3-digit
number.
NOTE
• When selecting a 1-digit channel number, do not fail to
press the 0 button.
To select a 3-digit channel number
(e.g., Channel 115):
Complete the following steps within 3 seconds.
–0
5
Display
CH s/r
a
To select a 1 or 2-digit channel number
(e.g., Channel 5):
Complete the following steps within 3 seconds.
1
1
2
Press the 0 button.
• Complete the step 2 within 3 seconds after the
step 1.
Press the 5 button.
Using FLASHBACK on the remote control
unit
Press FLASHBACK to switch the currently tuned
channel to the previously tuned channel.
Press FLASHBACK again to switch back to the
currently tuned channel.
–
–
–1
11
115
3
2
Press the 100 button.
• Complete the step 2 within 3 seconds after the
step 1.
Press the 1 button.
• Complete the step 3 within 3 seconds after the
step 2.
Press the 5 button.
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
؀
؁
FREEZE
MODE
VOL CH
MUTE
VIEW
SLEEP LEARN
EDIT/
ENT
FLASHBACK
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
100
0
NOTE
• FLASHBACK will not work if no channel has been
changed after the System is turned on.
NOTE
• The 100 button is only enabled when selecting channels
in Cable mode.
23
Display
Volume adjustment
Mute
Using VOL
kk
kk
k/
ll
ll
l on the remote control unit
• To increase the volume, press VOL
kk
kk
k.
• To decrease the volume, press VOL
ll
ll
l.
Output device
Variable sound
Audio out
VariableFixed
Variable sound
Constant as
specified
Mute
NOTE
• VOL
ll
ll
l/
kk
kk
kon the Display operates the same as VOL
kk
kk
k/
ll
ll
l
on the remote control unit.
Audio status
20
Speaker
MONITOR OUT
Simple button operations for
changing volume/sound
Changing the volume
You can change the volume on the Display or on the
remote control unit.
Watching TV
20
؀
؁
VOL
MUTE
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
FREEZE
MODE
CH
MENU TV/SAT/DVD
DTV/DVD TOP
RETURN
MENU
MENU
VIEW
SLEEP LEARN
EDIT/
ENT
FLASHBACK
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
100
0
VOL l/k
؀
؁
VOL CH
MUTE
MENU
DTV/DVD TOP
MENU
FLASHBACK
TV/SAT/DVD
RETURN
MENU
* When “Audio Out” is set to “Variable”, the indicator on the
screen changes as shown below.
NOTE
• See page 56 for details on the audio out function.
Using MUTE on the remote control unit
Mutes the current sound output.
Press MUTE.
•“M” has been displayed on the screen for 30
minutes, and the sound is silenced.
0
1
2
NOTE
• Within 30 minutes of pressing MUTE, mute can be
canceled by using one of the methods below.
• Pressing VOL l/k on the Display or VOL k/l, MTS
or MUTE on the remote control unit can also cancel the
mute.
• Mute will be canceled after 30 minutes have passed.
However, the System will not suddenly output a loud
sound as the volume level is set to 0 automatically.
Within 30 minutes, press MUTE again to
cancel the mute.
• Before 30 minutes, the volume level returns to
the previous setting.
• After 30 minutes, increase the volume level by
pressing VOL k.
24
Watching TV
Setting MTS/SAP stereo mode
The System has a feature that allows reception of
sound other than the main audio for the program. This
feature is called Multi-channel Television Sound (MTS).
The System with MTS can receive mono sound, stereo
sound and Secondary Audio Programs (SAP). The SAP
feature allows a TV station to broadcast other
information, which could be audio in another language
or something completely different like weather
information.
You can enjoy Hi-Fi stereo sound or SAP
broadcasts where available.
• Stereo broadcasts
View programs like live sporting events, shows and
concerts in dynamic stereo sound.
• SAP broadcasts
Receive TV broadcasts in either MAIN or SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to second language, supplementary
commentary and other information. (SAP is mono sound.)
If stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to fixed
mono-sound mode.
NOTE
• Once “MONO” mode is selected, the sound remains mono
even if the System receives a stereo broadcast. You must
switch the mode back to “STEREO” if you want to hear
stereo sound again.
• Selecting MTS while in the input mode does not change
the type of sound. In this case, sound is determined by
the video source.
Each time you press
MTS, MTS toggles as
shown below.
STEREOkSAP mode MONO mode
MTS
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
MODE
AV
POWER
CC
PICTURE
SELECT
SUB TWIN CH
FREEZE
MODE
VIEW
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
38
ANT-A
ST(SAP)
38
ANT-A
SAP(ST)
38
ANT-A
MONO
38
ANT-A
MONO
38
ANT-A
MONO
38
ANT-A
MONO
Using FRONT SURROUND on the
remote control unit
h produces SRS and FOCUS effects from the
speakers.
Each time you press FRONT SURROUND, the mode
changes among SRS, FOCUS, FOCUS e SRS and
Off.
SURROUND
FRONT
TV
ANT-A/B
INPUT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
TV VCRCBL
/SAT
/DTV
DVD
/LD
SRS sound options
• SRS (Sound Retrieval System): Creates more a
natural sound retrieving the spatial information from
any stereo recording and restoring the original three-
dimensional sound field.
• FOCUS: Repositions a sound image from two
speakers to a more optimal listening position or
height without moving them.
• FOCUS e SRS: Produces both SRS and FOCUS
effects.
• Off: Outputs the normal sound.
: Off
: SRS
: FOCUS
: FOCUS+SRS
Examples: when receiving MTS and SAP
38
ANT-A
STEREO
38
ANT-A
STEREO
38
ANT-A
MONO
38
ANT-A
MAIN
38
ANT-A
SAP
38
ANT-A
MONO
STEREO mode MAINkSAP mode
25
Basic adjustment settings
AV input mode menu items
List of AV menu items to help you with
operations
Contrast ......................................... Page 31
Brightness ..................................... Page 31
Color ............................................... Page 31
Tint ................................................. Page 31
Sharpness ...................................... Page 31
Advanced
C.M.S. ................................... Page 32
Color Temp .......................... Page 33
Black .................................... Page 33
3D-Y/C .................................. Page 34
Monochrome ....................... Page 34
Film Mode ............................ Page 35
I/P Setting ............................ Page 35
Picture
Power Save .................................... Page 37
No Signal Off ................................. Page 38
No Operation Off ........................... Page 38
EZ Setup ........................................ Page 26
CH Setup ................................. Pages 27-29
Input Signal ................................... Page 50
Parental CTRL ........................ Pages 59-65
Position .......................................... Page 47
Stretch Mode ................................. Page 51
Picture Flip .................................... Page 52
Language ....................................... Page 30
Treble .............................................. Page 36
Bass ............................................... Page 36
Balance .......................................... Page 36
Input Select.................................... Page 50
Noise Clean ................................... Page 55
Audio Out ....................................... Page 56
Cool Climate .................................. Page 57
Audio
Power control
Setup
Option
PC input mode menu items
List of PC menu items to help you with
operations
Contrast ......................................... Page 31
Brightness ..................................... Page 31
Red ................................................. Page 31
Green .............................................. Page 31
Blue ................................................ Page 31
C.M.S. ............................................. Page 32
Picture
Power Save .................................... Page 39
Power Management ...................... Page 39
Input Signal ................................... Page 55
Auto Sync. ..................................... Page 49
Fine Sync. ...................................... Page 49
Picture Flip .................................... Page 52
Language ....................................... Page 30
Audio
Power control
Setup
Treble .............................................. Page 36
Bass ............................................... Page 36
Balance .......................................... Page 36
Option
Audio Out ....................................... Page 56
Cool Climate .................................. Page 57
26
Basic adjustment settings
EZ setup
You can run EZ Setup again, even after setting up the
preset channels.
Language setting
Select from among 3 languages: English, French and
Spanish.
123
456
789
0
ENT
100
Press MENU and the TV MENU screen
displays.
Press c/d to select “Setup”.
1
2
Press a/b to select “EZ Setup”, and then
press SET/ENTER.
• If you already set the Secret No., go to step 4.
If not, skip to step 5.
Input the 4-digit secret number by using 0 –
9.
3
TV MENU
Setup Option
Secret No.
––––
4
5
Press a/b to select the desired language
listed on the screen, and then press SET/
ENTER.
Setup
EZ Setup - Language
English
Español
Français
TV MENU
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
POWER
MENU
GUIDE
INFO
TV MENU
Setup Option
Parental CTRL
EZ Setup
CH Setup
Position
[Mode1]
[English]
[Standard]
Stretch Mode
Picture Flip
Language
Antenna setting
NOTE
• Make sure what kind of connection is made with your
System when selecting “Air” or “Cable” for both ANT-A
and B.
Searching TV channels
Press c/d to select “Air” or “Cable” for ANT-
A, then press a/b to move down.
Press c/d to select “Air” or “Cable” for ANT-
B.
Press SET/ENTER to enter the setting.
• This operation makes the System search for
both ANT-A and B.
Channel search
Channel auto search makes the System look for all
channels viewable in the set area.
Example
NOTE
• If no channel is found, make sure what kind of connection
is made with your System and try EZ setup again.
• Make sure what kind of connection is made with your
System when selecting “Air” or “Cable” for both ANT-A
and B.
Example
Setup
EZ Setup - Air/Cable
ANT-A Air
ANT-B
Cable
Air Cable
TV MENU
CH Search
ANT-A [ ]2Air
CH Search
ANT-B [ ]2Cable
Setup
EZ Setup - Air/Cable
ANT-A Air
ANT-B
Cable
Air Cable
TV MENU
6
7
27
Basic adjustment settings
Channel setup
If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
POWER
MENU
GUIDE
INFO
Press MENU and the TV MENU screen
displays.
Press c/d to select “Setup”.
• Setup menu displays.
1
2
3
NOTE
• Make sure what kind of connection is made with your
System when selecting “Air” or “Cable” for both ANT-A
and B.
Press a/b to select “CH Setup”, and then
press SET/ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 59 for
setting a secret number.
Antenna setting
Press c/d to select “Air” or “Cable” for ANT-
A, then press a/b to move down.
Press c/d to select “Air” or “Cable” for ANT-
B.
Press SET/ENTER to enter the setting.
Example
Press a/b to select “Air/Cable”, and then
press SET/ENTER.
TV MENU
Setup
CH Setup
Air/Cable
CH Search
CH Memory
Favorites(ANT-A)
Favorites(ANT-B)
ANT-A Air
ANT-B
Cable
Air Cable
5
4
Channel search
Channel auto search makes the System look for all
channels viewable in the set area.
Press MENU and the TV MENU screen
displays.
Press c/d to select “Setup”.
• Setup menu displays.
1
2
3
Press a/b to select “CH Search”, and then
press SET/ENTER.
• Search All: searches both ANT-A and B
successively.
• Search for ANT-A: searches ANT-A only.
• Search for ANT-B: searches ANT-B only.
TV MENU
Setup
CH Setup
Air/Cable
CH Search
Favorites(ANT-B)
CH Memory
Favorites(ANT-A)
Search All
Search for ANT-A
Search for ANT-B
Press a/b to select the desired item, and
then press SET/ENTER.
• Channel Search automatically starts.
4
5
NOTE
• Make sure what kind of connection is made with your
System.
Press a/b to select “CH Setup”, and then
press SET/ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 59 for
setting a secret number.
Example
CH Search
ANT-A [ ]2Air
TV MENU
Setup
CH Setup
Air/Cable
CH Search
Favorites(ANT-B)
CH Memory
Favorites(ANT-A)
Search All
Search for ANT-A
Search for ANT-B
TV MENU
Setup
CH Setup
Air/Cable
CH Search
CH Memory
Favorites(ANT-A)
Favorites(ANT-B)
ANT-A Air
ANT-B
Cable
Air Cable
28
Basic adjustment settings
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
123
456
789
0
TWIN
PICTURE
SELECT
SUB TWIN CH
؀
؁
FREEZE
MODE
VOL CH
MUTE
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
POWER
MENU
GUIDE
INFO
VIEW
SLEEP LEARN
EDIT/
ENT
FLASHBACK
DISPLAY
INPUT
100
Channel memory setting
Press MENU and the TV MENU screen
displays.
Press c/d to select “Setup”.
• Setup menu displays.
TV MENU
Setup
CH Setup
Air/Cable
CH Search
CH Memory
Favorites(ANT-A)
Favorites(ANT-B)
Cable [2] 2 125
Antenna ANT-A
Skip
ANT-B
On Off
1
2
3
Press a/b to select “Skip”, and press c/d
to select “On” or “Off”.
• On: Skips channels. (Channel selection disabled using
CH
aa
aa
a/
bb
bb
b and TWIN CH
aa
aa
a/
bb
bb
b.)
• Off: Does not skip channels. (Channel selection enabled
using CH
aa
aa
a/
bb
bb
b and TWIN CH
aa
aa
a/
bb
bb
b.)
4
Press a/b to select “CH Setup”, and then
press SET/ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 59 for
setting a secret number.
7
Press c/d to select ANT-A or B.
5
6
Press a/b to select “CH Memory”, and then
press SET/ENTER.
Example
Press a/b and press c/d to select the
channel you want to skip or not.
NOTE
• Make sure what kind of connection is made with your
System.
Channel setup (continued)
29
Basic adjustment settings
Favorite channel setting
This function allows you to program 4 favorite channels,
in 4 different categories. (A total of 32 channels with
ANT-A and B combined.) By setting the favorite
channels in advance, you can select your favorite
channels easily.
Press MENU and the TV MENU screen
displays.
Press c/d to select “Setup”.
TV MENU
Setup
CH Setup
Air/Cable
CH Search
CH Memory
Favorites(ANT-A)
Favorites(ANT-B)
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
BCD
1
2
3
4
5
Press a/b to select “CH Setup”, and then
press SET/ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 59 for
setting a secret number.
Press a/b to select “Favorites(ANT-A)” or
“Favorites(ANT-B)”, and then press SET/
ENTER.
NOTE
• Make sure what kind of connection is made with your
System.
1 Press a/b/c/d to select the position in
the area.
2 Press SET/ENTER, and press a/b to
select your favorite channel to register.
3 Press SET/ENTER to register the setting.
4 Repeat steps 1 to 3 until your desired
channels are assigned.
(On-screen display when “Favorites(ANT-A)” is
selected.)
(On-screen display when “Favorites(ANT-B)” is
selected.)
Example
NOTE
• If the channels are memorized as shown, you can toggle
the assigned channels by pressing FAVORITE CH A.
TV MENU
Setup Option
Parental CTRL
EZ Setup
CH Setup
Position
[Mode1]
[English]
[Standard]
Stretch Mode
Picture Flip
Language
TV MENU
Setup
CH Setup
Air/Cable
CH Search
CH Memory
Favorites(ANT-A)
Favorites(ANT-B)
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
BCD
TV MENU
Setup
CH Setup
Air/Cable
CH Search
CH Memory
Favorites(ANT-A)
Favorites(ANT-B)
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
BCD
512
52
04
4
125 25 40 4
Example: Cable
6
Press MENU or MENU/RETURN to exit.
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
123
456
789
0
؀
؁
VOL CH
MUTE
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INFO
ENT
FLASHBACK
100
30
Basic adjustment settings
Language setting
You can also select a language from the setup menu.
Select from among 3 languages: English, French and
Spanish.
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
3
Press MENU and the TV MENU screen
displays.
1
2
Press c/d to select “Setup”.
Press a/b to select “Language”, and then
press SET/ENTER.
TV MENU
Setup Option
Parental CTRL
EZ Setup
CH Setup
Position
[Mode1]
[English]
[Standard]
Stretch Mode
Picture Flip
Language
4
TV MENU
Setup
Language
English
Español
Français
Press a/b to select the desired language
listed on the screen, and then press SET/
ENTER.
3
Press MENU and the PC MENU screen
displays.
1
2
Press c/d to select “Setup”.
Press a/b to select “Language”, and then
press SET/ENTER.
PC MENU
Setup Option
Fine Sync.
Input Signal
Auto Sync.
[English]
[Standard]
Language
Picture Flip
PC input mode
AV input mode
4
PC MENU
Setup
Language
English
Español
Français
Press a/b to select the desired language
listed on the screen, and then press SET/
ENTER.
31
Adjustments items for PC source
Basic adjustment settings
cbutton
For less contrast
For less brightness
For less color
intensity
Skin tones become
purplish
For less sharpness
Selected item
Contrast
Brightness
Color
Tint
Sharpness
Adjustments items for AV source
TV MENU
Picture Audio
USER TV
Contrast
Brightness
Color
Tint
Sharpness
Advanced
Reset
[+30]
[0]
[0]
[0]
[0]
0
–30
–30
–30
–10
+40
+30
+40
+30
+30
+10
NOTE
• Select “Advanced” and then press SET/ENTER to set
“C.M.S.”, “Color Temp”, “Black”, “3D-Y/C”, “Monochrome”,
“Film Mode” or “I/P Setting”. See pages 32 to 35.
dbutton
For more contrast
For more brightness
For more color
intensity
Skin tones become
greenish
For more sharpness
cbutton
For less contrast
For less brightness
For weaker red
For weaker green
For weaker blue
Selected item
Contrast
Brightness
Red
Green
Blue
dbutton
For more contrast
For more brightness
For stronger red
For stronger green
For stronger blue
Picture adjustments
Adjust the picture to your preference with the following
picture settings.
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
Press MENU and the TV MENU (PC MENU)
screen displays.
1
2
3
4
Press a/b to select a specific adjustment
item.
Press c/d to adjust the item to your desired
position.
Press c/d to select “Picture”.
• Picture menu displays.
NOTE
• When all adjustments set to factory preset values,
1 Press a/b to select “Reset”, and then press SET/
ENTER.
2 Press c/d to select “Yes”, and then press SET/
ENTER.
PC MENU
Picture Audio
USER PC
Contrast
Brightness
Red
Green
Blue
C. M. S.
Reset
[+30]
[0]
[0]
[0]
[0]
0
–30
–30
–30
–30
+40
+30
+40
+30
+30
+30
32
Basic adjustment settings
C.M.S. (Color Management System)
Color tone is managed using the six-color adjustment
setting.
Press MENU and the TV MENU screen
displays.
1
Press c/d to select “Picture”.
Press a/b to select “Advanced”, and then
press SET/ENTER.
Press a/b to select “C.M.S.”, and then press
SET/ENTER.
5
Press a/b to select a specific adjustment
item. Press c/d to adjust the item to your
desired position.
TV MENU
Picture
Advanced USER TV
C. M. S.
R
Y
G
C
B
M
Reset
[ 0]
[ 0]
[ 0]
[ 0]
–30
–30
–30
+30
–30
+30
+30
+30
[ 0] –30
+30
[ 0] –30
+30
Changing reds
closer to
magenta or yellow.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press SET/
ENTER.
AV input mode
PC input mode
Press MENU and the PC MENU screen
displays.
Press c/d to select “Picture”.
Press a/b to select “C.M.S.”, and then
press SET/ENTER.
Press a/b to select a specific adjustment
item. Press c/d to adjust the item to your
desired position.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press SET/
ENTER.
1
2
3
4
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
3
TV MENU
Picture Audio
USER TV
Contrast
Brightness
Color
Tint
Sharpness
Advanced
Reset
[+30]
[0]
[0]
[0]
[0]
0
–30
–30
–30
–10
+40
+30
+30
+30
+10
4
TV MENU
Picture
Advanced USER TV
C. M. S.
Color Temp
Black
3D-Y/C
Monochrome
Film Mode
I/P Setting
R
Y
G
C
B
M
[ 0]
[ 0]
[ 0]
[ 0]
–30
–30
–30
–30
+30
+30
+30
+30
[ 0] –30
+30
[ 0] –30
+30
PC MENU
Picture Audio
USER PC
Contrast
Brightness
Red
Green
Blue
C. M. S.
Reset
[+30]
[0]
[0]
[0]
[0]
0
–30
–30
–30
–30
+40
+30
+40
+30
+30
+30
2
PC MENU
Picture
C. M. S. USER PC
R
Y
G
C
B
M
Reset
[ 0]
[ 0]
[ 0]
[ 0]
–30
–30
–30
+30
–30
+30
+30
+30
[ 0] –30
+30
[ 0] –30
+30
Changing reds
closer to
magenta or yellow.
33
Basic adjustment settings
Color temperature
Adjusts the color temperature to give a better white
balance.
4
5
Press a/b to select “Color Temp.”, and then
press SET/ENTER.
Description
White with Bluish tone
White with Reddish tone
Selected item
High
Mid-High
Mid
Mid-Low
Low
Press MENU and the TV MENU screen
displays.
1
2
Press c/d to select “Picture”.
3
Press a/b to select “Advanced”, and then
press SET/ENTER.
TV MENU
Picture Audio
USER TV
Contrast
Brightness
Color
Tint
Sharpness
Advanced
Reset
[+30]
[0]
[0]
[0]
[0]
0
–30
–30
–30
–10
+40
+30
+30
+30
+10
TV MENU
Picture
Advanced USER TV
C. M. S.
Color Temp
Black
3D-Y/C
Monochrome
Film Mode
I/P Setting
High
Mid-High
Mid
Mid-Low
Low
Black
Select a level for automatically adjusting blackish tone
to suit viewing conditions.
4
5
Press a/b to select the desired level, and
then press SET/ENTER.
Press a/b to select “Black”, and then press
SET/ENTER.
Press a/b to select the desired level, and
then press SET/ENTER.
TV MENU
Picture
Advanced USER TV
C. M. S.
Color Temp
Black
3D-Y/C
Monochrome
Film Mode
I/P Setting
Off
High
Low
Press MENU and the TV MENU screen
displays.
1
2
Press c/d to select “Picture”.
3
Press a/b to select “Advanced”, and then
press SET/ENTER.
Description
No adjustment
For high detail in black portions
For low detail in black portions
Selected item
Off
High
Low
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
TV MENU
Picture Audio
USER TV
Contrast
Brightness
Color
Tint
Sharpness
Advanced
Reset
[+30]
[0]
[0]
[0]
[0]
0
–30
–30
–30
–10
+40
+30
+30
+30
+10
34
Basic adjustment settings
3D-Y/C
Provides high quality images with minimal dot crawl
and cross color noise.
Description
Normal adjustment
For movie image
For still image
Selected item
Standard
Fast
Slow
4
Press a/b to select “3D-Y/C”, and then
press SET/ENTER.
Press MENU and the TV MENU screen
displays.
1
2
Press c/d to select “Picture”.
3
Press a/b to select “Advanced”, and then
press SET/ENTER.
TV MENU
Picture Audio
USER TV
Contrast
Brightness
Color
Tint
Sharpness
Advanced
Reset
[+30]
[0]
[0]
[0]
[0]
0
–30
–30
–30
–10
+40
+30
+30
+30
+10
TV MENU
Picture
Advanced USER TV
C. M. S.
Color Temp
Black
3D-Y/C
Monochrome
Film Mode
I/P Setting
Standard
Fast
Slow
Monochrome
For viewing a video in monochrome.
Description
Normal color
For viewing in monochrome
Selected item
Off
On
Press a/b to select “Monochrome”, and
then press SET/ENTER.
4
Press c/d to select “On”, and then press
SET/ENTER.
5
Press MENU and the TV MENU screen
displays.
1
2
Press c/d to select “Picture”.
3
Press a/b to select “Advanced”, and then
press SET/ENTER.
TV MENU
Picture Audio
USER TV
Contrast
Brightness
Color
Tint
Sharpness
Advanced
Reset
[+30]
[0]
[0]
[0]
[0]
0
–30
–30
–30
–10
+40
+30
+30
+30
+10
TV MENU
Picture
Advanced USER TV
C. M. S.
Color Temp
Black
3D-Y/C
Monochrome
Film Mode
I/P Setting
On Off
5
Press a/b to select the desired level, and
then press SET/ENTER.
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
NOTE
• “3D-Y/C” is not selectable when receiving images from
DVI or component video terminals.
35
Basic adjustment settings
Film mode (3:2 pull-down)
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyses it then
recreates each still film frame for high-definition picture
quality.
Description
Normal viewing mode
Detects, analyzes, converts film source
Selected item
Off
On
Press a/b to select “Film Mode”, and then
press SET/ENTER.
• Some items may be grayed out. They are not
selectable.
Press MENU and the TV MENU screen
displays.
Press c/d to select “Picture”.
Press a/b to select “Advanced”, and then
press SET/ENTER.
1
2
3
TV MENU
Picture Audio
USER TV
Contrast
Brightness
Color
Tint
Sharpness
Advanced
Reset
[+30]
[0]
[0]
[0]
[0]
0
–30
–30
–30
–10
+40
+30
+30
+30
+10
4
TV MENU
Picture
Advanced USER TV
C. M. S.
Color Temp
Black
3D-Y/C
Monochrome
Film Mode
I/P Setting
On Off
I/P Setting
Adjusting the image and input signal can give you a
more beautiful picture.
Press a/b to select “I/P Setting”, and then
press SET/ENTER.
• Some items may be grayed out. They are not
selectable.
Press c/d to select “Interlace” or
“Progressive”, and then press SET/ENTER.
4
5
Press MENU and the TV MENU screen
displays.
1
2
Press c/d to select “Picture”.
3
Press a/b to select “Advanced”, and then
press SET/ENTER.
TV MENU
Picture
Advanced USER TV
C. M. S.
Color Temp
Black
3D-Y/C
Monochrome
Film Mode
I/P Setting
Interlace Progressive
Press c/d to select “On”, and then press
SET/ENTER.
5
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
POWER
MENU
GUIDE
INFO
NOTE
• I/P Setting is set to Progressive when Film Mode is “On”.
• “I/P Setting” is not selectable when channel display shows
an input resolution of 480P, 720P or 1080I.
TV MENU
Picture Audio
USER TV
Contrast
Brightness
Color
Tint
Sharpness
Advanced
Reset
[+30]
[0]
[0]
[0]
[0]
0
–30
–30
–30
–10
+40
+30
+30
+30
+10
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
POWER
MENU
GUIDE
INFO
36
Basic adjustment settings
Sound adjustment
You can adjust the sound quality to your preference
with the following settings.
Press c/d to select “Audio”.
Press a/b to select a specific adjustment
item.
Press c/d to adjust the item to your desired
position.
2
3
4
cbutton
For weaker treble
For weaker bass
Decrease audio from
the right speaker
Selected item
Treble
Bass
Balance
dbutton
For stronger treble
For stronger bass
Decrease audio from
the left speaker
Press MENU and the TV MENU (PC MEMU)
screen displays.
1
TV MENU
Audio Power control
USER TV
Treble
Bass
Balance
Reset
[0]
[0]
–15
L
+15
[0] –15
+15
R
NOTE
• When all adjustments set to factory preset values,
1 Press a/b to select “Reset”, and then press SET/
ENTER.
2 Press c/d to select “Yes”, and then press SET/
ENTER.
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
37
Basic adjustment settings
Power control
Power control setting allows you to save energy.
Power control for AV source
Power save
When set to “Save1”, “Save2” or “Auto”, power
consumption is reduced by decreasing backlight
brightness.
Press a/b to select “Power Save”, and then
press SET/ENTER.
Press a/b to select the desired backlight
brightness, and then press SET/ENTER.
3
4
NOTE
• When setting to “Auto”, the OPC indicator lights up green,
senses the surrounding light and automatically adjusts
the backlight brightness. Make sure no object obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
Press c/d to select “Power control”.
Press MENU and the TV MENU screen
displays.
2
1
TV MENU
Power control Setup
No Signal Off
Power Save
No Operation Off [Disable]
[Disable]
[Standard]
TV MENU
Power control
Power Save
Standard
Save1
Save2
Auto
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
Description
The screen darkens slightly to conserve
power consumption.
The screen darkens more significantly to
conserve power consumption.
Backlight brightness adjusts according
to the ambient light of the room to
conserve power consumption.
Selected item
Save1
Save2
Auto
38
Basic adjustment settings
No signal off
When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.
Press a/b to select “No Signal Off”, and
then press SET/ENTER.
Press c/d to select “Enable”, and then
press SET/ENTER.
3
4
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
• When a TV program finishes, and the AVC System receives
signal input, this function may not operate.
Press c/d to select “Power control”.
Press MENU and the TV MENU screen
displays.
No operation off
When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.
Press a/b to select “No Operation Off”, and
then press SET/ENTER.
Press c/d to select “Enable”, and then
press SET/ENTER.
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
Press c/d to select “Power control”.
Press MENU and the TV MENU screen
displays.
3
4
2
1
TV MENU
Power control Setup
No Signal Off
Power Save
No Operation Off [Disable]
[Disable]
[Standard]
TV MENU
Power control
No Signal Off
DisableEnable
3
4
2
1
TV MENU
Power control Setup
No Signal Off
Power Save
No Operation Off [Disable]
[Disable]
[Standard]
TV MENU
Power control
No Operation Off
DisableEnable
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
Power control (continued)
39
Power control for PC source
Power control setting allows you to save energy.
Press c/d to select “Power control”.
2
Power save
Press MENU and the PC MENU screen
displays.
1
Press a/b to select “Power Save”, and then
press SET/ENTER.
Press a/b to select the desired backlight
brightness, and then press SET/ENTER.
3
4
PC MENU
Power control Setup
Power Management
Power Save
[Off]
[Standard]
TV MENU
Power control
Power Save
Standard
Save1
Save2
Auto
NOTE
• When setting to “Auto”, the OPC indicator lights up green,
senses the surrounding light and automatically adjusts
the backlight brightness. Make sure no object obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
Basic adjustment settings
Power management
When set, the power will automatically shut down.
Press a/b to select “Power Management”,
and then press SET/ENTER.
Press a/b to select “Mode1” or “Mode2”,
and then press SET/ENTER.
Description
• No power management
• Factory preset value.
• If no signal inputs for 8 minutes, the power
shuts down.
• Even if you start using the PC and the signal
inputs again, the System stays off.
• The System turns on again by pressing
POWER button on the Display or TV
POWER on the remote control unit. (See
page 20).
• If no signal inputs for 8 seconds, the power
shuts down.
• When you start using the PC and the signal
inputs again, the System turns on.
Selected item
Off
Mode1
Mode2
Press c/d to select “Power control”.
Press MENU and the PC MENU screen
displays.
3
4
2
1
PC MENU
Power control Setup
Power Management
Power Save
[Off]
[Standard]
PC MENU
Power control
Power Management
Off
Mode1
Mode2
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
Description
The screen darkens slightly to conserve
power consumption.
The screen darkens more significantly to
conserve power consumption.
Backlight brightness adjusts according
to the ambient light of the room to
conserve power consumption.
Selected item
Save1
Save2
Auto
40
Using external equipment
Digital TV tuner
AVC System
(rear view)
AVC System
(front view)
AV Receiver
(Built-in Tuner Amp)
VCR
DVD player
Game console/
Camcorder
PC
You can connect many types of external equipment to your System, like a DVD player, VCR, Digital TV tuner, PC,
game console and camcorder. To view external source images, select the input source from INPUT on the
remote control unit or on the Display.
CAUTION
• To protect all equipment, always turn off the AVC System before connecting to a DVD player, VCR, Digital TV tuner,
PC, game console, camcorder or other external equipment.
NOTE
• Please refer to the relevant operation manual (DVD player, PC, etc.) carefully before making connections.
S-VIDEO
S-VIDEO S-VIDEO
AV
S-VIDEO
AV
AV
AV
Y/P
B/PR
Y/PB/PR
PC-AUDIO
ANALOG RGB
AV
S-VIDEO
DVI
41
Using external equipment
AVC System
(rear view)
DVD player
S-video cable
(commercially available)
When using component
video cable, select
“COMPONENT” for
“Input Select” in the
menu.
Watching a DVD image
Connecting a DVD player
You can use the INPUT 1 terminal when connecting to a DVD player and other audiovisual equipment.
Displaying a DVD image
To watch a DVD image, select “INPUT1” from “INPUT
SOURCE” menu using INPUT on the remote control
unit or on the Display. (See page 50.)
Then select “INPUT1” on “Input Select” in the “Option”
menu to set the correct input signal type. (See page
50.)
The setting is stored and can be selected on the
“INPUT SOURCE” menu.
NOTE
• Each time INPUT is pressed, the input source toggles.
• If the DVD image does not come in clearly, you may need
to change the input signal type setting on the “Input Select”
menu.
• Refer to your DVD player operation manual for the signal
type.
INPUT
TV
ANT-A/B
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
FREEZE
MODE
VIEW
SLEEP LEARN
EDIT/
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
AV cable
(commercially available)
Component video cable
(commercially available)
TV MENU
Option
Input Select
Auto
COMPONENT
AV-Y/C
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
For INPUT1 signal
42
Using external equipment
AVC System (rear view)
VCR
AV cable
(commercially available)
Watching a VCR image
Connecting a VCR
You can use the INPUT 2 terminal when connecting a VCR and other audiovisual equipment.
Displaying a VCR image
To watch a VCR image, select “INPUT2” from the
“INPUT SOURCE” menu using INPUT on the remote
control unit or on the Display. (See page 50.)
When connecting to the INPUT 2 terminals, select
“INPUT2”.
You only need to select the input source on the “INPUT
SOURCE” menu.
NOTE
• Each time INPUT is pressed, the input source toggles.
• Refer to your VCR operation manual for the signal type.
S-VIDEO cable
(commercially available)
INPUT
TV
ANT-A/B
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
FREEZE
MODE
VIEW
SLEEP LEARN
EDIT/
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
43
Using external equipment
AVC System (rear view)
Digital TV tuner
Watching broadcasts via a Digital TV tuner
Connecting a Digital TV tuner
You can use the INPUT 3 terminal when connecting a Digital TV tuner and other audiovisual equipment.
Displaying broadcasts via a Digital TV tuner
To watch a Digital TV tuner image, select “INPUT3”
from the “INPUT SOURCE” menu using INPUT on the
remote control unit or on the Display. (See page 50.)
Then select “INPUT3” on “Input Select” in the “Option”
menu to set the correct input signal type. (See page
50.)
The setting is stored and can be selected on the
“INPUT SOURCE” menu.
NOTE
• Each time INPUT is pressed, the input source toggles.
• If the Digital TV tuner image does not come in clearly, you
may need to change the input signal type setting on the
“Input Select” menu.
• Refer to your Digital TV tuner operation manual for the
signal type.
• DVI-DIGITAL INPUT cannot connect to a PC. Input
resolution is compatible with 1080I, 720P, 480P and VGA
(60Hz).
• Use the PC INPUT terminals on the front of the AVC System
when connecting a PC. (See page 45.)
• When connecting to the DVI-DIGITAL INPUT terminal, be
sure to use a commercially available DVI cable with ferrite
core attached.
Component video cable
(commercially available)
S-video cable
(commercially available)
INPUT
TV
ANT-A/B
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
FREEZE
MODE
VIEW
SLEEP LEARN
EDIT/
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
When using component
video cable, select
“COMPONENT” for
“Input Select” in the
menu.
DVI cable (commercially available)
When using DVI cable, select “DVI”
for “Input Select” in the menu.
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
TV MENU
Option
Input Select
Auto
COMPONENT
AV-Y/C
DVI
AV cable
(commercially available)
For INPUT3 signal
44
Using external equipment
AVC System (front view)
Game console/Camcorder
AV cable (commercially available)
S-video cable
(commercially available)
Enjoying a game console or viewing camcorder images
Connecting a game console or camcorder
A game console, camcorder and some other audiovisual equipment are conveniently connected using the
INPUT 4 terminals.
NOTE
• The S-video terminal has priority over the video terminals.
Displaying an image of the game console or
camcorder
To connect a game console or view a camcorder, select
“INPUT4” from the “INPUT SOURCE” menu using
INPUT on the remote control unit or on the Display.
(See page 50.)
When connecting to the INPUT 4 terminals, select
“INPUT4”.
You only need to select the input source on the “INPUT
SOURCE” menu.
NOTE
• Each time INPUT is pressed, the input source toggles.
INPUT
TV
ANT-A/B
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
FREEZE
MODE
VIEW
SLEEP LEARN
EDIT/
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
45
Using external equipment
RGB cable
(commercially available)
AVC System (front view)
ø 3.5 mm stereo minijack cable
(commercially available)
PC
15
14
13
12
9
11
10
8
7
6
5
4 3
2
1
Pin No. Signal name Pin No. Signal name Pin No. Signal name
1 R 6 GND (Ground) q Not connected
2 G 7 GND (Ground) w SDA
3 B 8 GND (Ground) e HD
4 Not connected 9 ם5V r VD
5 CSYNC 0 GND (Ground) t SCL
Viewing an image from a PC
Connecting a PC
Use the PC terminals to connect a PC.
NOTE
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 76 for a list of PC signals compatible with the System.
Signal names for 15-pin mini D-sub connecter
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
Displaying an image from a PC
To view an image from a PC, select “PC” from the
“INPUT SOURCE” menu using INPUT on the remote
control unit or on the Display. (See page 50.)
When connecting to a PC, the correct input signal type
is automatically detected. If the PC image does not
come in clearly, you may need to set the Auto Sync.
adjustment on the “Auto Sync.” in the “Setup” menu.
(See page 49.)
You only need to select the input source on the “INPUT
SOURCE” menu.
NOTE
• Each time INPUT is pressed, the input source toggles.
INPUT
TV
ANT-A/B
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
FREEZE
MODE
VIEW
SLEEP LEARN
EDIT/
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
46
Using external equipment
Removing the speakers
This unit has detachable type speakers.
You can detach the system speakers when using external amplifier/speakers.
Before detaching (or attaching) speakers, unplug the AC cord from the AC outlet.
Before attaching/detaching speakers
• Before performing work make sure to turn off the System.
• Before performing work spread cushioning over a flat surface to lay the Display on. This will prevent it from
being damaged.
CAUTION
• The speaker terminals on the Display are only for the attached speakers. Do not connect any third party plug or speaker
to the terminal.
• Insert the speaker plug completely into the terminal.
• Do not handle or move the Display by the speakers.
NOTE
• Perform the same steps for both left and right speakers.
• To attach the speakers, perform the above steps in reverse order.
123
Unfasten the screws used to
secure the speakers in place.
Take hold of the speaker and
slowly slide it sideways.
(The speaker plug is still
inserted, so make sure not to
pull the speaker too far.)
Remove the speaker plug from
the terminal on the Display.
(Do not remove the plug by
pulling the cord.)
Now the speaker can be
detached from the Display.
Speaker
plug
47
Useful adjustment settings
Image position (AV input mode
only)
For adjusting a picture’s horizontal and vertical
position.
RECEIVER
POWER
MODE
AV
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
؀
؁
FREEZE
MODE
VOL CH
MUTE
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
VIEW
SLEEP LEARN
EDIT/
ENT
FLASHBACK
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
100
0
1
2
Press MENU and the TV MENU screen
displays.
Press c/d to select “Setup”.
4
5
3
Press a/b to select “Position”, and then
press SET/ENTER.
Press a/b to select “H-Pos.” or “V-Pos.”.
TV MENU
Setup Option
Parental CTRL
EZ Setup
CH Setup
Position
[Mode1]
[English]
[Standard]
Stretch Mode
Picture Flip
Language
Setup
Position
Reset
H-Pos. [0] –10 +10
V-Pos. [0] –30
+30
Press c/d to adjust the item to your desired
position.
Description
Centers the image by moving it to the left
or right.
Centers the image by moving it up or
down.
Selected item
H-Pos.
V-Pos.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press SET/
ENTER.
• Adjustments are stored separately according to input
source.
• You can easily move the image position as shown on page
48, but when the power is switched off the image will return
to the previously memorized position.
48
Useful adjustment settings
Moving the picture on the screen
You can move the picture around on the screen.
RECEIVER
POWER
SET/
ENTER
؀
؁
VOL CH
MUTE
MENU TV/SAT/DVD
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
RETURN
MENU
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
FLASHBACK
Press a/b/c/d to move an image on the screen to
the desired position. Press SET/ENTER to return to
the initial image position.
NOTE
• While pressing a/b/c/d, an on-screen image,
“Adjusting Position” displays to the desired position.
• This setting cannot be stored. Once the System shuts
down or enters standby mode, the setting is erased. To
move the picture around the screen again, you must
perform the above procedure again.
• The image position setting using the steps on page 47
can be stored. Select either according to your objectives.
• “TV”, “INPUT1”, “INPUT2”, “INPUT3” and “INPUT4” can
each adjust the image position setting on this page. The
same for View modes.
• An on-screen image from a PC source cannot be moved
around.
• Even when the image fills the screen, its position can be
adjusted with this function.
• Initialize the image position by pressing SET/ENTER.
49
Useful adjustment settings
1
2
Auto Sync. adjustment (PC input
mode only)
For automatically adjusting the PC image.
Press MENU and the PC MENU screen
displays.
Press c/d to select “Setup”.
• Setup menu displays.
4
3
Press a/b to select “Auto Sync.”, and then
press SET/ENTER.
Press c/d to select “Yes”, and then press
SET/ENTER.
• Auto Sync. starts and “Adjusting the image”
displays.
PC MENU
Setup
Auto Sync.
NoYes
NOTE
• When Auto Sync. is successful, “Auto Sync completed
successfully” displays. If not, Auto Sync. failed.
• Auto Sync. may fail even if “Auto Sync completed
successfully” displays.
• Auto Sync. may fail with a PC image composed of similar
patterns or monochrome. If not successful, change the
PC image and try again.
• Be sure to connect the PC to the AVC System and switch
it on before starting Auto Sync.
Fine Sync. adjustment (PC input
mode only)
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.
Press MENU and the PC MENU screen
displays.
Press c/d to select “Setup”.
• Setup menu displays.
Press a/b to select “Fine Sync.”, and then
press SET/ENTER.
Press a/b to select the specific
adjustment item.
Press c/d to adjust the item to your
desired position.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press SET/
ENTER.
30%
Description
Centers the image by moving it to the left
or right.
Centers the image by moving it up or
down.
Adjusts the clock frequency.
Adjusts the clock phase.
Selected item
H-Pos.
V-Pos.
Clock
Phase
Setup
Fine Sync.
Reset
H-Pos. [0] –90 +90
V-Pos.
Clock
Phase
[0]
[0]
[0]
–60
–90
–20
+60
+90
+20
1
2
4
3
5
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
50
Useful adjustment settings
Input signal source
Press MENU and the TV MENU screen
displays.
1
2
3
Press c/d to select “Option”.
• Option menu displays.
Press a/b to select “Input Select”, and then
press SET/ENTER.
Press INPUT on the remote control unit or
on the Display.
Press INPUT on the remote control unit or
on the Display to select the input source.
• An image from the selected source
automatically displays.
• You can also select the input source by
pressing a/b.
1
2
Input signal setting
For setting the signal type of external equipment
connected to INPUT 1 or 3 terminals.
4
Press a/b to select a signal type you want
to set, and then press SET/ENTER.
• If the selected signal type is incorrect, an image
does not display or no color image displays.
NOTE
• The System automatically sets input signals from
“INPUT2”, “INPUT4” and “PC”.
• If no (color) image displays, try to change the signal
type.
• Check the operation manual of the external equipment
for the signal type.
• Setting INPUT 1 and INPUT 3 signal selection to “Auto”
when other equipment is connected will result in the
following connectivity priority.
Input selection
Can use for selecting the input source.
NOTE
• Some items may be grayed out. They are not selectable.
Press INPUT on the remote control unit or
on the Display and select “INPUT3”, as
explained in Input selection.
Select “Auto” or “DVI” from the “Input Select”
menu for INPUT 3 signals, as explained in
Input signal setting.
Press MENU and TV MENU screen displays.
Press a/b to select “Input Signal”, and then
press SET/ENTER.
1
2
4
3
5
Press c/d to select “Setup”.
DVI input signal setting
Selecting the image resolution of the DVI-DIGITAL input
signal.
The DVI-DIGITAL terminal of this System supports the
HDCP* standard.
TV MENU
Setup
Input Signal
480pVGA
6
Press c/d to select a signal type you want
to set, and then press SET/ENTER.
NOTE
• * What is HDCP (High-Bandwidth Digital Content
Protection)?
• HDCP is a copyright protection technology that uses
TMDS (Transmission Minimized Differential Signal).
• HDCP was developed to prevent the illegal copying of
DVI signals.
TV MENU
Setup Option
Position
Parental CTRL
[Mode1]
[English]
[Standard]
Stretch Mode
Picture Flip
[VGA]
Input Signal
Language
INPUT
TV
ANT-A/B
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
FREEZE
MODE
VIEW
SLEEP LEARN
EDIT/
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
INPUT 1
1. COMPONENT VIDEO
2. S-VIDEO
3. VIDEO
INPUT 3
1. COMPONENT VIDEO
2. S-VIDEO
3. VIDEO
4. DVI
51
Stretch Mode screen
Stretch mode “Mode1”
Stretch mode “Mode2”
Description
Projects 16:9 squeeze image evenly over
entire screen.
Displays a 16:9 squeeze image without
distortion.
However, black bands appear at the top
and bottom.
Selected item
Mode1
Mode2
Press MENU and the TV MENU screen
displays.
1
2
Press a/b to select “Stretch Mode”, and
then press SET/ENTER.
3
Press c/d to select “Setup”.
TV MENU
Setup Option
Parental CTRL
EZ Setup
CH Setup
Position
[Mode1]
[English]
[Standard]
Stretch Mode
Picture Flip
Language
Press c/d to select “Mode1” or “Mode2”,
and then press SET/ENTER.
4
TV MENU
Setup
Stretch Mode
Mode2Mode1
Selecting Stretch Mode display (AV
input mode only)
Select the display type in Stretch Mode.
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
Useful adjustment settings
52
Useful adjustment settings
Picture flip
You can set the orientation of the picture.
Press MENU and the TV MENU screen
displays.
1
2
4
Press c/d to select “Setup”.
Press a/b to select the desired mode, and
then press SET/ENTER.
Press a/b to select “Picture Flip”, and then
press SET/ENTER.
TV MENU
Setup Option
Parental CTRL
EZ Setup
CH Setup
Position
[Mode1]
[English]
[Standard]
Stretch Mode
Picture Flip
Language
3
TV MENU
Picture Flip
Standard
Mirror
Upside Down
Rotate
Setup
AV input mode
PC MENU
Setup Option
Fine Sync.
Input Signal
Auto Sync.
[English]
[Standard]
Language
Picture Flip
Press MENU and the PC MENU screen
displays.
Press c/d to select “Setup”.
Press a/b to select “Picture Flip”, and then
press SET/ENTER.
PC input mode
Press a/b to select the desired mode, and
then press SET/ENTER.
NOTE
• If you choose “Mirror” or “Rotate”, the sound orientation also changes.
[Standard]: normal image. [Mirror]: mirror image.
[Upside Down]: upside
down image.
[Rotate]: rotated image.
ABC
PC MENU
Picture Flip
Standard
Mirror
Upside Down
Rotate
Setup
ABC
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
1
2
3
4
ABC
ABC
53
Useful adjustment settings
AV MODE
AV MODE gives you five viewing options to choose
from to best match environment of the System, which
can vary due to factors like room brightness, type of
program watched or the type of image input from
external equipment.
MODE
AV
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
FREEZE
MODE
VIEW
SLEEP LEARN
EDIT/
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
Description
For a highly defined image in a normally
bright room
For a clear-cut image emphasizing high
contrast for sports viewing
For a movie
Lowers image brightness for easier viewing
Allows the user to customize settings as
desired. You can set the mode for each
input source.
Selected item
STANDARD
DYNAMIC
MOVIE
GAME
USER
Press AV MODE.
• Present AV MODE displays.
Press AV MODE again before the mode
displayed on the screen disappears.
• The mode changes as shown below.
1
2
Mode selection for the INPUT 1 to 4 terminals
(Example)
Mode selection for the PC terminal
(Example)
AV MODE: STANDARD AV MODE: DYNAMIC
AV MODE: MOVIE
AV MODE: GAME
AV MODE: USER TV
AV MODE: STANDARD
AV MODE: USER PC
View modes for 4:3 Programs
Press VIEW MODE.
• The View mode menu displays.
• The menu lists the view mode options
selectable for the type of video signal currently
received.
MODE
VIEW
TWIN
PICTURE
SELECT
SUB TWIN CH
FREEZE
INPUT
SET/
ENTER
FAVORITE CH
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
GUIDE
INFO
Side Bar: Suitable for viewing
conventional 4:3
programs in their
normal format.
S.Stretch: Suitable for stretching
4:3 programs to fill
the screen.
Zoom: Suitable for viewing
wide-screen 2.35:1
anamorphic DVDs in
full screen.
Stretch: This mode is useful
for 1.78:1 DVDs.
When viewing 1.85:1
DVDs, stretch mode
will still show very
thin black bands at
the top and bottom of
the screen.
(Smart
stretch)
1
2
Press VIEW MODE or a/b while the View
mode menu is still on the screen.
• You can sequentially select a view mode that
has its own aspect ratio.
View Mode
Side Bar
S. Stretch
Zoom
Stretch
54
Useful adjustment settings
Input signal
(1024m768)
Input signal
(640m480)
View mode (for PC input mode)
You can select the screen size.
a
Press VIEW MODE.
• The View mode menu displays.
1
2
Press VIEW MODE or a/b to select a
desired item on the menu.
View Mode
Normal
Stretch
Dot by Dot
Zoom
View Mode
Stretch
Dot by Dot
Zoom
MODE
VIEW
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
FREEZE
SLEEP LEARN
EDIT/
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
SET/
ENTER
MENU TV/SAT/DVD
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
RETURN
MENU
POWER
MENU
GUIDE
INFO
Input signal
Normal Stretch Dot by Dot Zoom
Input signal
Normal Stretch Dot by Dot Zoom
640g480
Keeps the original
aspect ratio in a full
screen display.
An image fully fills
the screen.
Detects the
resolution of the
signal and displays
an image with the
same number of
pixels on the screen.
Keeps the original
aspect ratio in a full
screen display. The
top and bottom of
the image is slightly
cropped.
1024g768
An image fully fills
the screen.
Keeps the original
aspect ratio in a full
screen display. The
top and bottom of
the image is slightly
cropped.
Detects the
resolution of the
signal and displays
an image with the
same number of
pixels on the screen.
NOTE
• Connect the PC before making adjustments. (See page
45.)
• Selectable screen size may vary with input signal type.
a
Screen size images.
55
Useful adjustment settings
Press MENU and the PC MENU screen
displays.
1
2
Press a/b to select “Input Signal” and then
press SET/ENTER.
3
Press c/d to select “Setup”.
PC MENU
Setup Option
Fine Sync.
Input Signal
Auto Sync.
[English]
[Standard]
Language
Picture Flip
Press a/b to select the desired input signal
on the display.
4
PC MENU
Setup
Input Signal
640 x 480
848 x 480
Example
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
Input signal (for PC input mode)
• Some input signals may have to be registered manually
to display properly.
• The pairs of input signals (resolutions) in the list below
are not distinguishable when received. In such case, you
have to set the correct signal manually. After setting once,
it will display when the same signal (resolution) is input
again.
NOTE
• You can only select the “Input Signal” on the Setup menu
when receiving one of the 6 input signals listed above.
Noise clean
Produces a clearer video image.
1
2
3
TV MENU
Option
Noise Clean
Input Select
Audio Out
Cool Climate
[Fixed]
[Low]
[Auto]
[Off]
Press MENU and the TV MENU screen
displays.
Press c/d to select “Option”.
Press a/b to select “Noise Clean”, and then
press SET/ENTER.
• Some items may be grayed out. They are not
selectable.
Press a/b to select the desired level, and
then press SET/ENTER.
4
TV MENU
Option
Noise Clean
Off
High
Low
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
720g400
848g480
1280g768
640g400
640g480
1024g768
NOTE
• “Noise Clean” is not selectable when channel display
shows an input resolution of 480P, 720P or 1080I.
56
Useful adjustment settings
Description
• Sound via optional speakers is adjusted
with VOL k/l on the remote control unit
or VOL l/k on the Display.
• Sound via the MONITOR OUTPUT terminal
is not adjustable and constantly outputs.
• Sound via the MONITOR OUTPUT terminal
is adjusted with VOL k/l on the remote
control unit or VOL l/k on the Display.
• Sound via optional speakers is muted.
Selected item
Fixed
Variable
SLEEP
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
FREEZE
MODE
VIEW
LEARN
EDIT/
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
Sleep timer
Allows you to set a time when the TV automatically
switches to standby.
Sleep Timer: 0
30
60
90
120
Sleep Timer:
Sleep Timer:
Sleep Timer:
Sleep Timer:
1
2
Press SLEEP.
• Remaining time displays when sleep timer has
been set.
Each time you press SLEEP, the remaining
time switches as shown below.
• When set, the time automatically starts counting
down.
• If you want to adjust the sleep timer, you can
press SLEEP twice then change the time
setting.
• Five minutes before time expires, the remaining
time displays each minute.
NOTE
• Select “0” by pressing SLEEP to cancel the sleep timer.
• When the sleep timer is working, its indicator on the
Display lights red.
Audio out
Allows you to select what controls the audio output.
Press MENU and the TV MENU (PC MENU)
screen displays.
Press a/b to select “Audio Out”, and then
press SET/ENTER.
Press c/d to select “Fixed” or “Variable”,
and then press SET/ENTER.
Press c/d to select “Option”.
(On-screen display for AV input mode.)
(On-screen display for PC input mode.)
Sleep Timer: Remaining
30
1
2
3
4
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
TV MENU
Option
Noise Clean
Input Select
Audio Out
Cool Climate
[Fixed]
[Low]
[Auto]
[Off]
TV MENU
Option
Audio Out
VariableFixed
PC MENU
Option
Cool Climate
Audio Out
[Off]
[Fixed]
(On-screen display for AV input mode.)
57
Useful adjustment settings
Cool climate
Improves the response of Liquid Crystal Panel when
viewing fast-moving images. The effect is greater at
low room temperatures (at or below 59˚F/15˚C).
1
2
3
4
TV MENU
Option
Noise Clean
Input Select
Audio Out
Cool Climate
[Fixed]
[Low]
[Auto]
[Off]
TV MENU
Option
Cool Climate
OffOn
Press MENU and the TV MENU screen
displays.
Press c/d to select “Option”.
Press a/b to select “Cool Climate”, and then
press SET/ENTER.
Press c/d to select “On”, and then press
SET/ENTER.
NOTE
• Cool climate may cause image noise. If this occurs turn
the function “Off”.
AV input mode
Press c/d to select “On”, and then press
SET/ENTER.
NOTE
• Cool climate may cause image noise. If this occurs turn
the function “Off”.
Press MENU and the PC MENU screen
displays.
Press c/d to select “Option”.
Press a/b to select “Cool Climate”, and then
press SET/ENTER.
PC input mode
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
4
PC MENU
Option
Cool Climate
OffOn
1
2
3
PC MENU
Option
Cool Climate
Audio Out
[Off]
[Fixed]
58
Useful adjustment settings
Closed caption
• Your System is equipped with an internal closed caption decoder. Closed caption is the System which allows
you to view conversations, narration, and sound effects in TV programs and home videos as subtitles on your
Display.
• Not all programs and videos offer closed caption. Please look for the “N” symbol to ensure that captions will
be shown.
• “CC1” or “CC2” displays subtitles of TV dramas and news programs while allowing a full view of the picture.
• “T1” or “T2” superimposes on the picture other information (e.g. TV guide, weather) that is independent of the
TV in progress.
RECEIVER
POWER
CC
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS
PICTURE
SELECT
SUB TWIN CH
؀
؁
FREEZE
MODE
VOL CH
MUTE
MENU TV/SAT/DVD
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
RETURN
MENU
POWER
SET/
ENTER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
VIEW
SLEEP LEARN
EDIT/
ENT
FLASHBACK
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
100
0
CC/TEXT: Off
CC/TEXT: CC1
CC/TEXT: CC2
CC/TEXT: T1
CC/TEXT: T2
Each time you press CC, the closed caption toggles
as shown below.
NOTE
• When using Twin Picture (see page 66) and Still Image
(see page 66) functions, the right screen cannot display
closed caption data.
59
Useful adjustment settings
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
123
456
789
0
؀
؁
VOL CH
MUTE
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
ENT
FLASHBACK
100
Secret number setting for parental
control (AV input mode only)
Allows you to use a secret number to protect certain
settings from being accidentally changed.
IMPORTANT:
Three conditions must be met to enable V-Chip (see
pages 61 to 65):
1 Secret No. is registered.
2 V-Chip settings have been made.
3 “Status” is set to “On”.
Press MENU and TV MENU screen displays.
1
2
Press c/d to select “Setup”.
• Setup menu displays.
Press a/b to select “Parental CTRL”, and
then press SET/ENTER.
3
Press a/b to select “Secret No.”, and then
press SET/ENTER.
4
TV MENU
Setup
Parental CTRL
Secret No.
Setting a secret number
Select “New Secret No.”, and then press
SET/ENTER.
Input the new 4-digit secret number by using
0 – 9.
5
TV MENU
Setup
Parental CTRL
New Secret No.
New Secret No.
––––
Input Secret No.
––––
Reconfirm
––––
Input the same 4-digit number on the
“Reconfirm” screen as in step 5 to confirm.
6
TV MENU
Setup
Parental CTRL
New Secret No.
New Secret No.
****
Input Secret No.
––––
Reconfirm
––––
Setting parental control status
Used to enable or disable the parental control function.
Press a/b to select “Status”, and then press
SET/ENTER.
Press c/d to select “On” or “Off”, and then
press SET/ENTER.
• Select “On” to enable and “Off” to disable
Parental CTRL.
TV MENU
Setup
Parental CTRL
V-Chip
Secret No.
Status
On Off
Repeat steps 1 to 3 in Setting a secret
number.
• Secret number setting menu displays.
1
2
Input the 4-digit secret number by using 0 –
9.
3
4
Press MENU/RETURN to start configuring
V-Chip settings. (See pages 62 and 64 for
details.)
7
NOTE
• You can skip step 1 and 2 above while in parental CTRL
screen.
60
Useful adjustment settings
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
123
456
789
0
ENT
100
Changing the secret number
Allows you to change your current secret number.
Repeat steps 1 to 3 in Setting a secret
number.
• Secret number setting menu displays.
1
3
Press a/b to select “New Secret No.”, and
then press SET/ENTER.
Input the old 4-digit number you have set
using 0 – 9.
TV MENU
Setup
Parental CTRL
New Secret No.
Secret No. Clear
New Secret No.
––––
Input Secret No.
––––
Reconfirm
––––
Input the new 4-digit number using 0 – 9.
Input the same 4-digit number on the
“Reconfirm” screen as in step 6 to confirm.
2
Input the 4-digit secret number by using 0 –
9.
Press a/b to select “Secret No.”, and then
press SET/ENTER.
TV MENU
Setup
Parental CTRL
New Secret No.
Secret No. Clear
New Secret No.
––––
Input Secret No.
––––
Reconfirm
––––
4
5
6
7
TV MENU
Setup
Parental CTRL
New Secret No.
Secret No. Clear
New Secret No.
****
Input Secret No.
––––
Reconfirm
––––
Clearing the secret number
Allows you to clear your secret number.
Repeat steps 1 to 3 in Setting a Secret
Number.
• Secret number setting menu displays.
1
3
5
4
Press a/b to select “Secret No.”, and then
press SET/ENTER.
Press c/d to select “Yes”, and then press
SET/ENTER.
• Your secret number is cleared.
Press a/b to select “Secret No. Clear”, and
then press SET/ENTER.
NOTE
• See page 59 for re-registering with a new secret number
after being cleared.
• As a precautionary measure, make a note of your
secret number and keep it in a familiar place. If you
lose or forget your secret number, initialize the
Liquid Crystal Television to return all settings except
for the TV channel settings to factory preset values.
(See page 82.)
• If the secret number is cleared the Status setting
automatically sets to “Off”. “V-Chip” and “Status” will not
be selectable from the menu.
Input the 4-digit secret number by using 0 –
9.
TV MENU
Setup
Parental CTRL
New Secret No.
Secret No. Clear
Yes No
2
61
Useful adjustment settings
Parental control (setting V-CHIP level)
V-CHIP is an electronic filtering device built into your System. This tool gives parents a great degree of control
over broadcasts accessed by their children. It allows parents to select programs judged suitable for child
viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature
in your Liquid Crystal Television.
“V-Chip” and “Status” will not be selectable from the menu if you do not first configure your secret
number.(See page 59 for Secret number setting for parental control.)
• The U.S. has two rating systems for viewing content: TV Parental Guidelines and movie ratings.
• The TV Parental Guidelines work in conjunction with the V-CHIP to help parents screen out inappropriate
television shows from their children.
• Movie ratings are used for original movies rated by the Motion Picture Association of America (MPAA) as
watched on cable TV and not edited for television. The V-CHIP can also be set to block MPAA-rated movies.
Voluntary movie rating system (MPAA)
Rating
Age
G
PG
PG-13
R
NC-17
X
General audiences. All ages admitted.
Parental guidance suggested. Some material may not be suitable for children.
Parents strongly cautioned. Some material may be inappropriate for children under 13.
Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some
jurisdictions).
No one 17 and under admitted.
A rating that has now been superseded by NC-17.
Description
X: Content rating can be set.
TV Parental Guidelines
TV-Y (All children)
TV-Y7 (Directed to older children)
TV-G (General audience)
TV-PG (Parental Guidance suggested)
TV-14 (Parents strongly cautioned)
TV-MA (Mature audience only)
Rating
Suggested
age
Content
FV
(Fantasy
violence)
V
(Violence)
S
(Sexual
situation)
L
(Adult
language)
D
(Sexually
suggestive
dialog)
X
X
X
X
X
X
X
X
X
X
X
X
a
• If you select “PG-13”, this will automatically block the higher ratings
“R”, “NC-17” and “X”.
NOTE
• Voluntary movie rating system only uses an age-based rating.
TV MENU
Setup
Parental CTRL
MPAA
TV Guidelines
Can. English Ratings
Can. French Ratings
PG-13
R
NC-17
X
NONE
PG
G
62
Useful adjustment settings
Voluntary movie rating system (MPAA)
Press MENU and the TV MENU screen
displays.
1
2
Press c/d to select “Setup”.
• Setup menu displays.
Input the 4-digit secret number by using 0 –
9.
3
Press a/b to select “Parental CTRL”, and
then press SET/ENTER.
• Secret number setting menu displays only
when “Secret No.” is set. (See page 59.)
• “V-Chip” and “Status” will not be selectable
from the menu if you do not first configure your
secret number. (See page 59.)
5
Press a/b to select “V-Chip”, and then press
SET/ENTER.
6
TV MENU
Setup
Parental CTRL
V-Chip
Secret No.
Status
Press a/b to select “MPAA”, and then press
SET/ENTER.
Press a/b to adjust the item to your desired
position. “ ” indicates the item is blocked.
Press MENU/RETURN.
• The setting automatically enters “Block” for any
ratings below your selection.
• If Status is not set to “On” the configuration
settings will not work. (See page 59.)
7
TV MENU
Setup
Parental CTRL
MPAA
TV Guidelines
Can. English Ratings
Can. French Ratings
PG-13
R
NC-17
X
NONE
PG
G
TV Parental Guidelines (TV Guidelines)
Repeat steps 1 to 5 in Voluntary movie
rating system (MPAA).
1
2
Press a/b to select “TV Guidelines”, and
then press SET/ENTER.
Press a/b to adjust the item to your desired
position. “ ” indicates the item is blocked.
• The setting automatically enters “Block” for any
ratings below your selection.
When setting an individual content-based rating
item, do as follows:
1 Press d to access block content items from
the currently selected age-based rating item.
2 Press a/b to select an individual item, and
then press SET/ENTER to unblock (“
” is
removed). Repeat the same steps for other
items.
3 Press c or MENU/RETURN to register after
all individual content rating items are set.
Example
Example
Example
3
TV MENU
Setup
Parental CTRL
MPAA
TV Guidelines
Can. English Ratings
Can. French Ratings
L
S
V
D
TV-G
TV-PG
TV-14
TV-MA
NONE
TV-Y7
TV-Y
TV MENU
Setup
Parental CTRL
MPAA
TV Guidelines
Can. English Ratings
Can. French Ratings
L
S
V
D
TV-G
TV-PG
TV-14
TV-MA
NONE
TV-Y7
TV-Y
4
• If Status is not set to “On” the configuration
settings will not work. (See page 59.)
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
123
456
789
0
ENT
100
63
Useful adjustment settings
Canadian Rating Systems
• The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications
Commission (CRTC) policy on violence in television programming.
• While violence is the most important content element to be rated, the structure developed takes into
consideration other program content like language, nudity, sexuality and mature themes.
• When setting the V-CHIP on the Canadian system you can choose either the Canadian English ratings or the
Canadian French ratings.
Rating
Age
E
C
C8e
G
PG
14e
18e
Exempt: Includes news, sports, documentaries and other information programming; talk
shows, music videos, and variety programming.
Children: Intended for younger children under the age of 8 years. Pays careful attention to
themes that could threaten their sense of security and well-being.
Children over 8 years old: Contains no portrayal of violence as the preferred, acceptable,
or only way to resolve conflict; nor encourage children to imitate dangerous acts which
they may see on the screen.
General: Considered acceptable for all age groups. Appropriate viewing for the entire
family, contains very little violence, physical, verbal or emotional.
Parental Guidance: Intended for a general audience, but may not be suitable for younger
children (under the age of 8) because it could contain controversial themes or issues.
Over 14 Years: Could contain themes where violence is one of the dominant elements of
the storyline, but it must be integral to the development of plot or character. Language
usage could be profane and nudity present within the context of the theme.
Adults: Intended for viewers 18 years and older and might contain depictions of violence,
which while related to the development of plot, character or themes, are intended for adult
viewing. Could contain graphic language and portrayals of sex and nudity.
Description
Canadian English ratings
Rating
Age
E
G
8anse
13anse
16anse
18anse
Exempt programming.
General: All ages and children, contains minimal direct violence, but may be integrated
into the plot in a humorous or unrealistic manner.
General but inadvisable for young children: May be viewed by a wide public audience, but
could contain scenes disturbing to children under 8 who cannot distinguish between
imaginary and real situations. Recommended for viewing with parent.
Over 13 years: Could contain scenes of frequent violent scenes and therefore
recommended for viewing with parent.
Over 16 years: Could contain frequent violent scenes and intense violence.
Over 18 years: Only for adult viewing. Could contain frequent violent scenes and extreme
violence.
Description
Canadian French ratings
64
Useful adjustment settings
Canadian English ratings
Press a/b to select “Can. English Ratings”,
and then press SET/ENTER.
Press a/b to adjust the item to your desired
position. “ ” indicates the item is blocked.
• The setting automatically enters “Block” for any
ratings below your selection.
• If Status is not set to “On” the configuration
settings will not work. (See page 59.)
Canadian French ratings
Repeat steps 1 to 5 in Canadian English
ratings.
Press a/b to select “Can. French Ratings”,
and then press SET/ENTER.
Press a/b to adjust the item to your desired
position. “ ” indicates the item is blocked.
• The setting automatically enters “Block” for any
ratings below your selection.
• If Status is not set to “On” the configuration
settings will not work. (See page 59.)
Press MENU and the TV MENU screen
displays.
Press c/d to select “Setup”.
Input the 4-digit secret number by using 0 –
9.
Press a/b to select “Parental CTRL”, and
then press SET/ENTER.
• Secret number setting menu displays only
when “Secret No.” is set. (See page 59.)
• “V-Chip” and “Status” will not be selectable
from the menu if you do not first configure your
secret number. (See page 59.)
Press a/b to select “V-Chip”, and then press
SET/ENTER.
Example
Example
TV MENU
Setup
Parental CTRL
MPAA
TV Guidelines
Can. English Ratings
Can. French Ratings
E
C
C8+
G
PG
14+
18+
NONE
1
2
3
TV MENU
Setup
Parental CTRL
MPAA
TV Guidelines
Can. English Ratings
Can. French Ratings
8ans+
13ans+
16ans+
18ans+
NONE
G
E
1
2
3
TV MENU
Setup Option
Secret No.
––––
5
TV MENU
Setup Option
Parental CTRL
EZ Setup
CH Setup
Position
[Mode1]
[English]
[Standard]
Stretch Mode
Picture Flip
Language
6
TV MENU
Setup
Parental CTRL
V-Chip
Secret No.
Status
4
7
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
123
456
789
0
ENT
100
65
Useful adjustment settings
How to temporarily release the V-CHIP
BLOCK
• The V-CHIP BLOCK is working and censors a
broadcast, “V-CHIP HAS BEEN ACTIVATED.”
displays.
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
123
456
789
0
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
؀
؁
FREEZE
MODE
VOL CH
MUTE
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
VIEW
SLEEP LEARN
EDIT/
ENT
FLASHBACK
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
100
Press SET/ENTER while the V-CHIP is
working and then the secret number setting
menu displays.
Enter your 4-digit secret number with 0 – 9
and then press SET/ENTER. At this time V-
CHIP BLOCK temporarily releases.
1
2
Reactivating the temporarily released
V-CHIP BLOCK
• You can reactivate the temporarily released V-CHIP
BLOCK as shown below.
Method 1:
Select “Status” setting from the Parental CTRL menu
to reactivate BLOCK. See page 59.
Method 2:
Select “V-Chip” setting (“MPAA”, “TV Guidelines”,
“Can. English Ratings” or “Can. French Ratings”)
from the Parental CTRL to reactivate BLOCK. See
pages 62 and 64.
Method 3:
Switch off the AVC System power.
NOTE
• Performing any of the three above will activate the V-CHIP
BLOCK.
66
Other viewing options
Twin picture functions
Allows you to display two pictures on the screen at
one time.
Twin picture in all cases
You can display two same-sized pictures except when
inputting from a PC INPUT terminal.
Press TWIN PICTURE.
• Twin picture displays and a selected input
source image displays.
TWIN
PICTURE
SELECT
SUB TWIN CH
FREEZE
INPUT
MODE
VIEW
SLEEP LEARN
EDIT/
DISPLAY
Press SELECT to set either screen to be
active.
•“z” displays on the active screen, which has
sound output.
Press TWIN CH
aa
aa
a/
bb
bb
b to select another
channel on the inactive screen.
Press SUB INPUT to select another input
source on the inactive screen.
• A selected image displays.
Press TWIN PICTURE to exit twin picture.
NOTE
• This function does not work under the following input conditions:
1PC INPUT mode,
2Two pictures from the same source (e.g. INPUT 1 and INPUT 1),
3HDTV signal source is input on the right side screen display.
• When this function is not available, “No dual screen display available”
will display.
• Pressing ANT-A/B while viewing in Twin Picture mode (TV image and
video image) with TV selected will display the TV image of the other tuner.
• Pressing ANT-A/B while viewing Twin Picture with video selected will
not change the image displayed.
• Pressing ANT-A/B while viewing Twin Picture with two TV images
displayed will not have any effect.
• Pressing ANT-A/B while viewing Twin Picture with two video images
displayed will switch the selected screen to a TV image.
5
Picture and still image
You can display two same-sized pictures – one moving
and one still – when inputting from an AV source.
Press FREEZE.
• A moving image displays on the left screen and
a still image displays on the right screen. The
still image is one frame captured from a moving
image at the moment you press FREEZE.
Update the still image by pressing SET/
ENTER.
• Each time you press SET/ENTER, the image
on the right screen updates.
Press FREEZE to exit still image.
NOTE
• This function does not work in PC input mode.
• When this function is not available, “No still image display
available.” will display.
• The still image automatically goes out after 30 minutes.
FREEZE
1
2
3
FREEZE
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
MODE
VIEW
SLEEP LEARN
EDIT/
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
SET/
ENTER
MENU TV/SAT/DVD
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
RETURN
MENU
POWER
MENU
GUIDE
INFO
1
2
3
4
TV
ANT-A/B
INPUT
SURROUND
FRONT
MODE
AV
POWER
MTS CC
TV VCRCBL
/SAT
/DTV
DVD
/LD
67
Other viewing options
Learning remote control function
You can operate the connected AV products (AV
Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD)
using the learning function for your remote control unit.
This remote control unit has the function that can
memorize each remote control code.
Presetting manufacturer codes
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
؀
؁
FREEZE
MODE
VOL CH
RETURN
MUTE
MENU TV/SAT/DVD
FAVORITE CH
RECEIVER
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
RETURN
MENU
POWER
SET/
ENTER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
VIEW
SLEEP LEARN
EDIT/
ENT
FLASHBACK
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
100
0
LEARN
123
456
789
0
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
FREEZE
MODE
VIEW
SLEEP
EDIT/
ENT
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
100
0.8 to 2.0 inch (2 to 5 cm)
Remote control
(Supplied accessory)
Remote control of
AV product
Slide the Mode switch to match the device
to which you want to preset the remote
control signal.
Press EDIT/LEARN and 1 at the same time.
• LED flashes continuously.
Press 0 – 9 to enter the manufacturer code.
(See page 68.)
• Preset mode is finished once the LED no longer
lights up.
NOTE
• To stop the EDIT mode in the middle, press EDIT/LEARN
once more.
• If Mode switch is switched while in EDIT mode, EDIT mode
will be canceled.
• If there is no operation for over 1 minute running, exit this
mode.
• When you enter a code that is not listed, LED flashes
quickly.
• If the table on page 68 does not include your desired
manufacturer or the remote control does not work, you
can make the memory learn its signal by the learn mode.
• The initial mode is “00”.
Learning the remote control
Be sure to slide the Mode switch to match
the device whose remote control signal you
want to be learned.
Press EDIT/LEARN and 2 at the same time.
• LED flashes continuously.
Press a button for you want to learn.
• Refer to the assigning buttons to functions on
each page.(See page 69 to 74.)
• The LED changes from lit up to flashing state.
• When the learn mode is finished, LED lights
up once and returns to the learn mode (LED
flashes continuously).
To exit learn mode, press EDIT/LEARN.
NOTE
• To stop the EDIT mode in the middle, press EDIT/LEARN
once more.
• If Mode switch is switched while in EDIT mode, EDIT mode
will be canceled.
• If there is no operation for over 1 minute running, exit this
mode.
• If TV POWER is pressed over 2 seconds running (LED
flashes continuously, step 2 above), the learning codes
of the current Mode switch position clear, changing back
to preset manufacturer codes. In this case, the LED turns
off after 2 seconds exiting learning mode.
1
2
3
1
2
4
3
68
Other viewing options
Manufacturer codes
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
SHARP1
VCR
SHARP2
SHARP3
PIONEER
FISHER
FISHER
FISHER
GOLDSTAR
HITACHI1
HITACHI2
HITACHI3
MAGNAVOX2
MITSUBISHI1
MITSUBISHI2
MITSUBISHI3
MITSUBISHI4
MITSUBISHI5
MITSUBISHI6
PANASONIC1
PANASONIC2
PANASONIC3
RCA1
RCA2
RCA3
SHARP (DVD)
DVD/LD
PIONEER (DVD)
PANASONIC (DVD)
SAMSUNG (DVD)
SONY (DVD)
TOSHIBA (DVD)
JVC (DVD)
PIONEER (LD)
KENWOOD (LD)
PANASONIC1 (LD)
PANASONIC2 (LD)
PIONEER1 (CATV)
CATV/SAT/
DTV
PIONEER2 (CATV)
JERROLD1 (CATV)
JERROLD2(CATV)
JERROLD3 (CATV)
JERROLD4 (CATV)
JERROLD5 (CATV)
JERROLD6 (CATV)
JERROLD7 (CATV)
JERROLD8 (CATV)
JERROLD9 (CATV)
JERROLD10 (CATV)
S.A.1 (CATV)
S.A.2 (CATV)
S.A.3 (CATV)
S.A.4 (CATV)
ZENITH1 (CATV)
ZENITH2 (CATV)
ZENITH3 (CATV)
PIONEER (SAT)
RCA1 (SAT)
RCA2 (SAT)
SONY (SAT)
24
25
26
27
28
29
30
31
32
33
34
35
36
SANYO1
VCR
SANYO2
SANYO3
SONY (BETA)
SONY (VHS)
SONY (8 mm)
TOSHIBA
JVC1
JVC2
JVC3
JVC4
JVC5
ZENITH
PHILIPS (LD)
DVD/LD
RCA (LD)
SONY (MDP)
SONY (LD)
CATV/SAT/
DTV
PIONEER (DTV)
SHARP (DTV)
69
Other viewing options
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
؀
؁
FREEZE
MODE
VOL CH
MUTE
MENU TV/SAT/DVD
FAVORITE CH
RECEIVER
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
RETURN
MENU
POWER
SET/
ENTER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
VIEW
SLEEP LEARN
EDIT/
ENT
FLASHBACK
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
100
0
POWER
1
32
Mode switch
Using the TV remote control unit to
control other devices
Receiver control buttons
When a SHARP receiver is connected to the Display,
the receiver can operate using buttons 1 to 3.
When another non-SHARP receiver is connected to
the display, the signals for 1 to 3 must first be learned
before operating. (See page 67.)
1 RECEIVER POWER (STANDBY/ON)
Turns receiver power on and off.
2 RECEIVER INPUT
Selects the input source connected to the receiver.
3 RECEIVER VOL
kk
kk
k/
ll
ll
l
Adjusts receiver volume level. Press RECEIVER VOL
kk
kk
k to increase the volume and RECEIVER VOL
ll
ll
l to
decrease it.
NOTE
• (RECEIVER) MUTE
Allows remote unit to learn receiver’s mute signal. Use
this button when the mode switch is set to something
other than TV.
• The color-highlighted buttons on the remote control can
learn the control signal from another device’s remote
control.
70
Other viewing options
Cable control buttons
When the Mode switch is set to CBL/SAT/DTV the
cable converter connected to the Display can operate
using 1 to 5.
Cable converters made by other manufacturers and
not preset can also operate using the remote control
unit if 1 to 5 have learned the functions. (See page
67.)
10 – 9
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
2 CH a/b
Press CH a or CH b to tune in a higher or lower
channel.
3 SOURCE POWER
Turns the cable converter power on and off.
4 100 ENT *
Fix the selected channel with the direct channel
selection buttons.
5 FLASHBACK *
Press to switch between the current channel and the
channel you were watching immediately before.
* Some manufacturers do not preset 100 ENT and
FLASHBACK. Use these buttons to learn if necessary.
NOTE
• CABLE, SAT and DTV cannot be selected at the same
time.
• The color-highlighted buttons on the remote control can
learn the control signal from another device’s remote
control.
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
؀
؁
FREEZE
MODE
VOL CH
MUTE
MENU TV/SAT/DVD
FAVORITE CH
RECEIVER
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
RETURN
MENU
POWER
SET/
ENTER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
VIEW
SLEEP LEARN
EDIT/
ENT
FLASHBACK
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
100
0
POWER
5
3
2
4
1
Mode switch
71
Other viewing options
SAT control buttons
When the SAT is preset by the learning remote control
function, the remote control unit buttons will function
as shown below.
• When the Mode switch is set to CBL/SAT/DTV,
satellite broadcast tuners made by other
manufacturers and not preset can also operate
with the remote control unit if 1 to 7 have learned
the functions. (See page 67.)
10 – 9
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
2 SOURCE POWER
Turns the Satellite broadcast tuner power on and off.
3 SET/ENTER, a/b/c/d
SET/ENTER: Press to activate the selected function.
a/b/c/d: Press the button to select items on the SAT
GUIDE screen or SAT MENU screen.
4 100 ENT
Fix the selected channel with the direct channel
selection buttons.
• Use this button to learn if necessary.
5 SAT MENU
When this button is pressed, the satellite broadcasting
menu screen will display.
6 SAT GUIDE
When this button is pressed, the satellite broadcasting
guide screen will display.
7 SAT INFO
When this button is pressed, information on satellite
broadcasting will display.
• Use this button to learn if necessary.
NOTE
• CABLE, SAT and DTV cannot be selected at the same
time.
• The color-highlighted buttons shown in the figure at left
can learn the control signal from another device’s remote
control.
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
؀
؁
FREEZE
MODE
VOL CH
MUTE
MENU TV/SAT/DVD
FAVORITE CH
RECEIVER
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
RETURN
MENU
POWER
SET/
ENTER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
VIEW
SLEEP LEARN
EDIT/
ENT
FLASHBACK
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
100
0
POWER
5
6
7
2
3
4
1
Mode switch
72
Other viewing options
DTV control buttons
For viewing DTV broadcasts, a digital TV tuner
(commercially available) is necessary.
When the Mode switch is set to CBL/SAT/DTV, the
remote control unit buttons will function as shown
below.
• Operate the tuner using 1 to 10.
10 – 9
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
2 • (DOT)
Used for channel selection.
3 CH a/b
Press CH a or CHb to tune in a higher or lower channel.
4 SOURCE POWER
Turns the digital TV tuner on and off.
5 SET/ENTER, a/b/c/d
SET/ENTER: Press to activate the selected function.
a/b/c/d: Press the button to select items on the DTV
MENU screen.
6 FAVORITE CH/Colored (blue/green/red/yellow)
FAVORITE CH: Used for making FAVORITE CH settings
with the digital TV tuner.
Blue/green/red/yellow: Used to make selections from
the digital TV tuner menu.
7 FLASHBACK
Press to switch between the current channel and the
channel you were watching immediately before.
8 DTV/DVD TOP MENU
When this button is pressed, the DTV menu screen will
display.
9 DTV/SAT GUIDE
When this button is pressed, the DTV guide screen will
display.
10 DTV/SAT INFO
When this button is pressed, information on DTV will
display.
NOTE
• CABLE, SAT and DTV cannot be selected at the same
time.
• The color-highlighted buttons on the remote control can
learn the control signal from another device’s remote
control.
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
؀
؁
FREEZE
MODE
VOL CH
MUTE
MENU TV/SAT/DVD
FAVORITE CH
RECEIVER
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
RETURN
MENU
POWER
SET/
ENTER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
VIEW
SLEEP LEARN
EDIT/
ENT
FLASHBACK
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
100
0
POWER
9
8
5
4
10
2
3
1
7
6
Mode switch
73
Other viewing options
VCR control buttons
When the VCR is preset by the learning remote control
function, the remote control unit button will function as
follows when the Mode switch of the remote control
unit is set to VCR.
• When the input selector button having the same
number as the input terminal connecting the VCR is
pressed, the VCR can operate using 1 to 8.
• VCR made by other manufacturers and not preset
can also operate using the remote control unit if 1 to
8 have learned the functions. (See page 67.)
1 CH a/b
Press to select the channel of the TV tuner on the VCR.
2 SOURCE POWER
Turns the power of the VCR on and off.
3 F
Set pauses and still pictures.
4 G
Rewinds the tape and allows picture search.
5 H
Stop the tape transport.
6, 8 VCR REC
Press these buttons at the same time to start recording.
NOTE
• Depending on the VCR manufacturer, for some models,
VCR REC is activated by first pressing INFO followed
by d while you keep pressing INFO.
For other models, VCR REC is activated by following the
opposite sequence; first pressing d followed by INFO
while you keep pressing d.
Please try both methods and use the appropriate one.
7 J
Rapidly advances the tape and allows picture search.
8 I
Selects playback.
NOTE
• The color-highlighted buttons on the remote control can
learn the control signal from another device’s remote
control.
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
؀
؁
FREEZE
MODE
VOL CH
MUTE
MENU TV/SAT/DVD
FAVORITE CH
RECEIVER
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
RETURN
MENU
POWER
SET/
ENTER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
VIEW
SLEEP LEARN
EDIT/
ENT
FLASHBACK
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
100
0
POWER
2
3
1
6, 8
7
8
4
5
Mode switch
74
Other viewing options
DVD/LD control buttons
When the DVD/LD is preset by the learning remote
control function, the remote control unit button will
function as follows when the Mode switch of the
remote control unit is set to DVD/LD.
• When the input selector button having the same
number as the input terminal connecting a DVD
player or LD player is pressed, these players can
operate using 1 to 11. (7 to 9 are for DVD players
only.)
• DVD/LD players made by other manufacturers and
not preset can also operate using the remote control
unit if 1 to 11 have learned the functions. (See page
67.)
1 U
Pressing quickly once takes you to the start of the next
chapter. Each time you press it, you move ahead to the
start of the next chapter.
2 T
Pressing quickly once takes you to the start of the
chapter currently playing. Each time you press it, you
move back to the start of the previous chapter.
3 SOURCE POWER
Turns the power of the DVD/LD player on and off.
4 F
Set pauses and still pictures.
5 G
Continue pressing to go backward.
6 H
Playback stops when pressing once.
With some DVD/LD players, pressing the button twice
may open the disc tray.
7 DVD MENU (DVD only)
When this button is pressed, the DVD menu will display.
8 DVD TOP MENU (DVD only)
When this button is pressed, the DVD top menu will
display.
9 SET/ENTER, a/b/c/d (DVD only)
SET/ENTER: Press to activate the selected function.
a/b/c/d: Press the button to select items on the DVD
MENU screen.
10 J
Continue pressing for fast forward.
11 I
Selects playback.
NOTE
• DVD and LD cannot be selected at the same time.
• The color-highlighted buttons on the remote control can
learn the control signal from another device’s remote
control.
Mode switch
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
؀
؁
FREEZE
MODE
VOL CH
MUTE
MENU TV/SAT/DVD
FAVORITE CH
RECEIVER
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
RETURN
MENU
POWER
SET/
ENTER
MENU
GUIDE
INPUT VOL
؁
VOL
؀
INFO
VIEW
SLEEP LEARN
EDIT/
ENT
FLASHBACK
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
100
0
POWER
3
1
2
4
10
9
8
7
11
5
6
75
Appendix
• No power
• Unit cannot be operated.
• Remote control unit does not
operate.
• Picture is cut off/with sidebar
screen.
• Strange color, light color, or color
misalignment
• Power is suddenly turned off.
• No picture
• No sound
Problem Possible Solution
• Make sure the Display and the AVC System are connected correctly. (See page
9.)
• Check if you pressed TV POWER on the remote control unit. (See page 20.)
If the indicator on the Display lights up red, press POWER on the Display.
• Is the AC cord disconnected? (See page 19.)
• Has the main power been turned on? (See page 20.)
• External influences such as lightning, static electricity, may cause improper
operation. In this case, operate the unit after first turning on the power of the
Display and the AVC System, or unplugging the AC cord and replugging it in
after 1 or 2 minutes.
• Is the Mode switch set correctly? Slide it to the TV setting position.
• Are batteries inserted with polarity (e, f) aligned? (See page 12.)
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminated near the remote control sensor?
• Is the image position correct? (See pages 47 and 48.)
• Are screen mode adjustments such as picture size made correctly? (See page
53)
• Adjust the picture tone. (See pages 31 to 35.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the input signal setting. (See page 50.)
• Is the sleep timer set? (See page 56.)
• Check the power control settings. (See pages 37 to 39.)
• The unit’s internal temperature has increased.
Remove any objects blocking vent or clean.
• Is connection to other components correct? (See pages 40 to 45.)
• Is correct input signal source selected after connection? (See page 50.)
• Is the correct input selected? (See page 50.)
• Is a non-compatible signal being input? (See page 76.)
• Is picture adjustment correct? (See pages 31 to 35.)
• Is the volume too low? (See page 23.)
• Is “Variable” selected in “Audio Out”? (See page 56.)
Troubleshooting
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near
a heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: –4°F to +140°F (–20°C to +60°C)
76
Appendix
640ן400
720ן400
640ן480
800ן600
832ן624
1024ן768
1280ן768
85 Hz
70 Hz
85 Hz
60 Hz
65 Hz
72 Hz
75 Hz
85 Hz
56 Hz
848ן480 60 Hz
60 Hz
72 Hz
75 Hz
85 Hz
74.5 Hz
60 Hz
70 Hz
75 Hz
85 Hz
60 Hz
1280ן1024 60 Hz
PC compatibility chart
Remarks
Macintosh 13؆ (67 Hz)
Macintosh 16؆
Macintosh 19؆
Resolution Frequency
Apple and Macintosh are registered trademarks
of Apple Computer, Inc.
DDC is a registered trademark of Video Electronics
Standards Association.
Power Management is a registered trademark of
Sun Microsystems, Inc.
VGA and XGA are registered trademarks of
International Business Machines Co., Inc.
77
RS-232C port specifications
Return codeCommand 4-digits Parameter 4-digits
PC Control of the System
• When a program is set, the Display can be controlled from the PC using the RS-232C terminal.
The input signal (PC/AV) can be selected, the volume can be adjusted and various other adjustments and
settings can be made, enabling automatic programmed playing.
• Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-sub RS-232C for the
connections.
NOTE
• This operation system should be used by a person who is accustomed to using computers.
Communication conditions
Set the RS-232C communications settings on the PC to match the display’s communications conditions. The
Display’s communications settings are as follows:
Baud rate:
Parity bit:
Data length:
Stop bit:
Flow control:
9,600 bps
8 bits
None
1 bit
None
Appendix
Command format
Communication procedure
Send the control commands from the PC via the RS-232C connector.
The display operates according to the received command and sends a response message to the PC.
Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending
the next command.
Eight ASCII codes e CR
Command 4-digits:Command. The text of four characters.
Parameter 4-digits:Parameter 0 – 9, x, blank, ?
Parameter
Input the parameter values, aligning left, and fill with blank(s) for the remainder. (Be sure that 4 values are input for the
parameter.)
When the input parameter is not within an adjustable range, “ERR” returns. (Refer to “Response code format”.)
No problem to input any numerical value for “x” on the table.
When “?” is input for some commands, the present setting value responds.
C1 C2 C3 C4 P1 P2 P3 P4
0055
100
Ϫ 30
0009
0
????
?
78
Command table
• About the command except being indicated here, it is outside the guarantee range of operation.
CONTROL ITEM COMMAND
PARAMETER
CONTROL CONTENTS
POWER SETTING It shifts to standby.
It input-switches by the toggle. (It is the same as an input change key)
It input-switches to TV. (A channel remains as it is. (Last memory))
It input-switches to INPUT1~INPUT4.
It input-switches to PC.
An input change is also included.
Although it can choose now, it is toggle operation in inside.
Although it can choose now, it is toggle operation in inside.
(Toggle)
Input terminal number (1–4)
AUTO
AV-Y/C
COMPONENT
AUTO
AV-Y/C
COMPONENT
DVI
(Toggle)
STANDARD
DYNAMIC
MOVIE
GAME
USER
Volume (0–60)
AV mode. (ע10)
PC mode. (ע90)
AV mode. (ע30)
PC mode. (ע60)
Only PC mode. (ע90)
Only PC mode. (ע20)
(Toggle) [AV]
Toggle operation.
An input change is included if it is not TV display.
In Air, 2–69ch is effective.
In Cable, 1–125ch is effective.
If it is not TV display, it will input-switch to TV.
If it is not TV display, it will input-switch to TV.
Change toggle operation of tuner A/B.
Toggle operation of a closed caption.
(Toggle)
Side Bar [AV]
S.Stretch [AV]
Zoom [AV]
Stretch [AV]
Normal [PC]
Stretch [PC]
Dot by Dot [PC]
Zoom [PC]
(Toggle)
Off
SRS
FOCUS
FOCUS ם SRS
One screen
Twin screens
The channel number of TV
The channel number of TV ם1
The channel number of TV מ1
(Toggle)
(Toggle)
OFF
CC1
CC2
T1
T2
(1~125)
AUTO
POWR
ITGD
ITVD
IAVD
IPCD
INP1
INP3
INPUT SELECTION A TOGGLE
INPUT SELECTION B
AV MODE SELECTION
VOLUME
POSITION
VIEWMODE
SRS
TWIN PICTURE
CHANNEL
ANT-A/B
CC
DIRECT
CH UP
CH DOWN
CHANNEL
H-POSITIONH-POSITION
V-POSITION
CLOCK
PHASE
INPUT 1
INPUT 3
AVMD
VOLM
HPOS
VPOS
CLCK
PHSE
SRSS
TW I N
DCCH
CHUP
CHDW
ANTS
CLCP
WIDE
0
x
0
*
x
0
0
1
2
3
1
2
0
*
*
*
*
*
0
0
*
x
x
x
0
1
2
3
4
5
1
1
2
3
4
0
1
2
3
4
5
6
7
8
*
*
1
2
3
4
5
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
*
*
*
*
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
*
*
*
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
TV
INPUT1-4
PC
Appendix
NOTE
• If an underbar (_) appears in the parameter column, enter a space.
• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
• As long as that from which the parameter (g) in the table is a numerical value, it may write anything.
Return code (0DH)
Response code format
Normal response
Problem response (communication error or incorrect command)
Return code (0DH)
OK
ERR
79
Appendix
Item 30o LIQUID CRYSTAL TELEVISION, Model: LC-30HV4U
TV
Function
American TV Standard NTSC System
VHF/UHF
VHF 2-13ch, UHF 14-69ch
CATV 1-125ch
Audio multiplex BTSC System
Terminals S-VIDEO in, AV in, COMPONENT in
INPUT 2
S-VIDEO in, AV in
INPUT 3
S-VIDEO in, AV in, COMPONENT in, DVI-DIGITAL in
ANTENNA 75 q Unbalance, F Type for VHF/UHF/CATV in
INPUT 4 S-VIDEO, AV in
PC
15 Pin mini D-Sub, Audio in (Ø 3.5mm jack)
OSD language
English/French/Spanish
Power Requirement
AC 110-240 V, 50/60 Hz
Power
Consumption
42 W (0.35W Standby with AC 120 V)
Weight
12.1 lbs./5.5 kg (w/o stand), 12.3 lbs./5.6 kg (with stand)
Accessories
Operation manual (m1), Remote control unit (m1), System cable (m1), AC cord
(m2), “AA” size Alkaline battery (m2), Stand unit (m1), Cable clamp (m1), RF
cable (m1)
TV-standard (CCIR)
Receiving
Channel
Rear INPUT 1
Front
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
Specifications
LCD panel 30o Advanced Super View & BLACK TFT LCD
Number of dots 2,949,120 dots (1280 m 768 m 3dots)
Brightness 430 cd/m
2
Backlight 60,000 hours (at Save 1 mode)
Viewing angles H : 170° V : 170°
Audio amplifier 10W m 2
Speakers Ø 8cm 2pcs
AVC
System
Monitor Out Audio (Variable, Fixed), S-VIDEO out, AV out
Headphones
Ø 3.5mm jack
AVC System
Display
AVC System
Display
112 W (0.5W Standby with AC 120 V)
34.8 lbs./15.8 kg (w/o stand), 43.4 lbs./19.7 kg (with stand)
Optional accessory
The listed optional accessory is available for the Liquid
Crystal Television. Please purchase it at your nearest shop.
• Additional optional accessories may be available in the
near future. When purchasing, please read the newest
catalogue for compatibility and check the availability.
No.
Wall mount bracket
Part name Part number
1 AN-37AG1
DC OUTPUT DC 6.5V 7W MAX
80
Dimensional drawings
21
29
/64 (545)
21
29
/64 (545)
23
15
/16 (608)
15
5
/32 (385)
39
7
/16 (1002)
12 (305)
3
21
/64 (84.5)
14
21
/64 (364)
30
5
/32 (766)
4
5
/8 (117.5) 4
5
/8 (117.5)
25
5
/16 (643)
19
9
/16 (497)
4
3
/8 (111)
12 (305)
3
21
/
64
(84.5)
3
7
/64 (79)
Unit: inch/(mm)
Display
81
Dimensional drawings
14
23
/
64
(365)
16
59
/
64
(430)
9
27
/
32
(250)7
13
/
64
(183)
7
5
/
64
(180)
3
47
/
64
(95)
3
/
16
(5)
Unit: inch/(mm)
AVC System
82
HOW TO SET THE FACTORY PRESETS
Press and hold down CLEAR on the AVC System while it is in standby mode. Then press POWER button on
the Display or TV POWER on the remote control unit to turn the System on.
All setting items (except TV channel) return to the factory presetting.
NOTE
• Running the factory presetting operation also clears the secret number.
You can run the EZ Setup again by using the following steps.
1 Turn on the power of the Display and the AVC System.
2 Press MENU. (Make sure the menu screen displays.)
3 Press c/d to select “Setup”.
NOTE
• If the secret number setting screen displays, you need to enter your secret number.
• If you forget your secret number, refer to HOW TO SET THE FACTORY PRESETS above.
4 Press a/b to select “EZ Setup”.
5 Press SET/ENTER.
NOTE
• As a precautionary measure, make a note of your secret number above, scissor it from this manual, and keep it in a
familiar place.
The secret number is .
83
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it
will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured
equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below
nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or
other misuse, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide
proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law.
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE
LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations
on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused
by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any
way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion
of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM
STATE TO STATE.
Model Specific Section
Your Product Model Number & Description:
Warranty Period for this Product:
Additional Item(s) Excluded from
Warranty Coverage (if any):
Where to Obtain Service:
What to do to Obtain Service:
LC-30HV4U LCD Color Television
(Be sure to have this information available when you need
service for your Product.)
One (1) year parts and labor from the date of purchase.
Non-rechargeable batteries.
From a Sharp Authorized Servicer located in the United States.
To find the location of the nearest Sharp Authorized Servicer,
call Sharp toll free at 1-800-BE-SHARP.
Contact your Sharp Authorized Servicer to obtain in-home
service for this Product. The Servicer will come to your home
and if it is necessary to remove the Product, the Servicer will
reinstall it. Be sure to have Proof of Purchase available.
Calling for Service
For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or
customer assistance, please call 1-800-BE-SHARP.
LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
TO OBTAIN PRODUCT INFORMATION, CALL 1-888-LCD-SHARP OR VISIT www.sharpusa.com
84
LIMITED WARRANTY
Consumer Electronics Products
Congratulations on your purchase!
Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer purchaser for this
Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer:
Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship. If any such
defects should be found in this product within the applicable warranty period, Sharp shall, at its option, repair or replace the product as
specified herein.
This warranty shall not apply to:
(a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate
use as outlined in the owner’s manual.
(b) Any Sharp product tampered with, modified, adjusted or repaired by any party other than Sharp, Sharp’s Authorized Service Centres
or Sharp’s Authorized Servicing Dealers.
(c) Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but not limited to
head cleaning tapes and chemical cleaning agents.
(d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product including but
not limited to earphones, remote controls, AC adapters, batteries, temperature probe, stylus, trays, filters, belts, ribbons, cables and
paper.
(e) Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.
(f) Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or liquid
spillage.
(g) Any product received without appropriate model, serial number and CSA/cUL markings.
(h) Any products used for rental or commercial purposes.
(i) Any installation, setup and/or programming charges.
Should this Sharp product fail to operate during the warranty period, warranty service may be obtained upon delivery of the Sharp product
together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized Sharp Service Centre or an
Authorized Sharp Servicing Dealer. In home warranty service may be provided at Sharp’s discretion on any Sharp television with the
screen size of 27” or larger and on any Sharp Over-the-Range Microwave Oven.
This warranty constitutes the entire express warranty granted by Sharp and no other dealer, service centre or their agent or employee is
authorized to extend, enlarge or transfer this warranty on behalf of Sharp. To the extent the law permits, Sharp disclaims any and all
liability for direct or indirect damages or losses or for any incidental, special or consequential damages or loss of profits resulting from a
defect in material or workmanship relating to the product, including damages for the loss of time or use of this Sharp product or the loss
of information. The purchaser will be responsible for any removal, reinstallation, transportation and insurance costs incurred. Correction of
defects, in the manner and period of time described herein, constitute complete fulfillment of all obligations and responsibilities of Sharp
to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict
liability or otherwise.
WARRANTY PERIODS:
Parts & Labour (exceptions noted)
Audio Products 1 year
Camcorder 1 year
DVD Products 1 year
LCD Projector 1 year (lamp 90 days)
LCD TV 1 year
Microwave Oven 2 years (magnetron component-3 additional years)
Television Products 1 year (picture tube component-1 additional year)
VCR Product 1 year
Vacuum Cleaner 1 year
To obtain the name and address of the nearest Authorized Sharp Service Centre or Dealer, please contact:
SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road East, Mississauga, Ontario L4Z 1W9
For more information on this Warranty, Sharp Extended Warranty
Offers, Sharp Canada Products, Accessory Sales, Dealer or Service
Locations, please call (905) 568-7140
Visit our Web site: www.sharp.ca
VALID IN CANADA ONLY
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA DE
CRISTAL LIQUIDO
TELEVISOR DE CRISTAL LÍQUIDO
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
MANUAL DE OPERAÇÃO
LC
-
30HV4U
ENGLISH
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
LC-30HV4U
ESPAÑOL
FRANÇAIS
Printed on post-consumer recycled paper.
Imprimé sur du papier recyclé.
Impreso en papel reciclado.
Impresso em papel reciclado pós utilização.
Printed in Japan
Imprimé au Japon
Impreso en Japón
Impresso no Japão
TINS-A530WJZZ
03P02-JKG
PORTUGUÊS
OPERATION MANUAL
MANUAL DE OPERACIÓN
MODE D’EMPLOI
MANUAL DE OPERAÇÃO
A
1 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp LC30HV4U bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp LC30HV4U in de taal/talen: Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 4,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info