679566
42
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
Image for illustration purposes only. Actual product may vary.
Operating Instructions
UHD SMART Television
Initial Document.indd 1Initial Document.indd 1 26/11/2018 09:46:1126/11/2018 09:46:11
Initial Document.indd Sec1:2Initial Document.indd Sec1:2 26/11/2018 09:46:1326/11/2018 09:46:13
33
Manufacturers Guarantee
IMPORTANT GUARANTEE INFORMATION
Thank you for purchasing this television. We hope you have many years of trouble free
enjoyment from your purchase.
Your product is covered under the manufacturers’ guarantee for 12 months from the date
of purchase.
If you experience any diffi culties with your TV, please refer to the ‘Frequently asked questions’ section
at the rear of these Operating Instructions.
If you are still unable to remedy the issue, try resetting the TV to factory settings - details can be found in
the ‘Settings’ menu section of these Operating Instructions - alternatively, please contact the helpline.
In the event that a fault is diagnosed, the helpline will arrange to collect the TV from your home
or work address, return it to our service centre, repair the item and then return it to you.
If we believe we cannot offer a permanent repair, we will replace the item.
Technical Support Information
Telephone UK 0330 024 0803, ROI 01443 3323
Web support: www.umc-uk.co.uk
Email: service@umc-uk.co.uk
Calls to 0330 numbers are charged at standard call rates and are included as part
of any bundled minutes with your phone provider.
The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm.
UK: Calls are charged at your normal telephone call rate.
ROI: Calls are charged at a local rate.
Please retain all packaging materials, in addition to your proof of purchase/receipt,
as you will need these in the event of warranty/service support.
This guarantee is in addition to and does not affect your statutory rights.
If you need to call the helpline, you will need the following information.
1) Model No ______________________________________ (You can fi nd this on the rear of the TV)
2) Date of purchase ______________________________________ (You can fi nd this on your sales receipt)
3) Serial Number ______________________________________ (You can fi nd this on the rear of the TV)
EXAMPLE OF LABEL ON REAR OF TV
This TV set is for domestic use only
Model No
Serial No.
Initial Document.indd Sec1:3Initial Document.indd Sec1:3 26/11/2018 09:46:1326/11/2018 09:46:13
4
Important Safety Instructions
To prevent spread of fi re,
keep candles or other open
ames away from this product
at all times
Please read these instructions. All of
the safety and operating instructions
should be read before the appliance
is operated.
Warnings
Television sets with 40” screens or larger must be
lifted and carried by at least 2 people.
This television does not contain any parts that are
serviceable by the user. In the event of a fault, contact
the manufacturer or authorised service department.
Exposing the internal parts of the TV may endanger
your life. The manufacturers guarantee does not
extend to faults caused by repairs carried out by
unauthorised third parties.
Do not use the TV set immediately after unpacking.
Wait until the TV warms up to room temperature
before using it.
To reduce the risk of fi re, electric shock or damage
to the TV, do not expose it to dust, rain or moisture.
Never expose the TV to dripping or splashing and do
not place objects fi lled with liquids on or near the TV.
Do not connect any external devices (DVD player,
games console etc.) when the TV is switched on.
Disconnect both the TV and device from the mains
before connecting. Only switch appliances on when
the connection process is complete.
Do not place the television in a confi ned space and
do not obstruct the ventilation openings at the rear of
the television.
When installing on a wall, ensure the TV is at
least 5cm from the wall for ventilation.
Always ensure that the TV’s ventilation openings
are not covered with items such as newspapers, table-
cloths, curtains, etc.
Dispose of this television and any components
including batteries in an environmentally friendly
manner. If in doubt, please contact your local authority
for details of recycling.
Ensure this TV is used in moderate climates only.
In cases of electrostatic discharge (ESD) the TV may
operate incorrectly. If this happens, turn the set off
at the mains and then turn back on again after 30
seconds. The set should now work normally.
WARNING: Never place a television set on an
unstable surface. The TV set may fall causing
serious personal injury or death. Many injuries,
particularly to children, can be avoided by taking
simple precautions such as:
Use cabinets or stands recommended by the
manufacturer of the television set.
Only use furniture that can safely support the
television set.
Ensure the television set is not overhanging the
edge of the supporting furniture.
Do not place the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television
set to a suitable support.
Do not place the television set on cloth or other
materials that may be located between the television
set and supporting furniture.
Please educate children about the dangers of
climbing on furniture to reach the television set or its
controls.
If your existing television set is being retained and
relocated, the same considerations as above should be
applied.
Safety
For your safety, this appliance is fi tted with a fused
3 pin mains plug. Should the fuse need to be replaced,
ensure that any replacement is of the same amperage
and approved with the BSI mark.
Never try and replace the mains plug unless
you have adequate qualifi cations and are legally
authorised to do so. In the event that a replacement
mains cable is required, contact the manufacturer for a
suitable replacement.
Never use the television if it is damaged in any way.
Always place the television on a fl at level surface
avoiding anywhere which may be subject to
strong vibration.
The ideal distance to watch the television is from
approximately 2.5-3 times the length of the diagonal
measurements of the TV screen away.
Ensure the television is not placed on top of the
power cable as the weight of the television may
damage the cable and cause a safety hazard.
Never place mobile phones, speakers or any
other device which may cause magnetic or radio
interference, near the television. If interference is
apparent, move the device causing the interference
away from the television.
To disconnect the set from the mains, remove the
mains plug from the socket.
Ensure that the mains plug is always easily
accessible.
When handling the set do not grip the LCD screen/
glass.
Do not pull the set when mounted on a bracket. If
using a moveable bracket, adjust via the bracket and
not the TV set.
Do not place this set above a heat source.
WARNING: Excessive volume when using
earphones and headphones can cause damage
to hearing.
Initial Document.indd Sec1:4Initial Document.indd Sec1:4 26/11/2018 09:46:1326/11/2018 09:46:13
55
Important Safety Instructions
Maintenance
To clean your TV, wipe with a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth dampened
with a weak detergent solution.
Never use alcohol, paint thinner or benzene to
clean this unit.
Before using a chemically treated cloth, read the
instructions that came with the cloth carefully.
CAUTION: If water or other liquid enters the
television through the display panel surface,
a malfunction may occur.
Packaging
The safest way to transport your item is in the
original box/packaging - please save your packaging
for this.
You will need the original box/packaging in the
event of warranty/service repair or support. We are
unable to carry out warranty/service if you are unable
to package the item correctly.
Important information regarding use of video
games, computers, captions or other  xed image
displays
The extended use of fi xed image program material can
cause a permanent “shadow image” on the LCD/LED panel,
also known as “screen burn”.
This “shadow image” can appear in the background during
normal viewing. This type of irreversible LCD/LED panel
deterioration can be limited by observing the following
steps:
1. Reduce the brightness/contrast setting to a minimum
suitable viewing level.
2. Do not display the fi xed image for extended periods
of time.
3. Turn the power off when not in use.
Examples of images that are more likely to cause “screen
burn” are as follows (this is not an exhaustive list):
TV channel logos: e.g. shopping channel logos and
pricing displays - especially if they are bright and stationary.
Moving or low-contrast graphics are less likely to cause
ageing of the screen.
• Time displays.
Teletext: Do not view a static page for a long period of
time
TV/DVD menus: e.g. listings of DVD disc content.
Pause mode: Do not leave the TV in pause mode
for long periods of time, e.g. when watching DVDs
or videos.
Important: Once shadow image/screen burn
occurs, it will never disappear and is not
repairable under warranty.
How do I dispose of this product?
UK: Waste electrical products should not
be disposed of with household waste.
Please dispose of the product at a
designated collection point for recycling
of WEEE. For your nearest facilities, please
see www.recycle-more.co.uk or ask store
for details.
ROI: Waste electrical products should not
be disposed of with household waste.
Separate disposal facilities exist. Check with
your local authority or retailer for recycling
advice.
Batteries
Do not expose batteries to high temperatures, excessive
heat, prolonged sunshine or fi re as this may cause leakage,
explosion or ignition.
Observe the correct polarity when inserting batteries.
Do not use different types of batteries together or mix
old and new batteries.
Dispose of batteries in an environmentally
friendly way.
Certain regions may regulate the disposal of batteries.
Please consult your local authority.
Cd
CE Statement:
Hereby, UMC Poland Sp. z o.o. declares that this LED
TV is in compliance with the essential requirements
and other relevant provisions of
RED Directive 2014/53/EU.
https://www.sharpconsumer.eu/documents-of-conformity/
Initial Document.indd Sec1:5Initial Document.indd Sec1:5 26/11/2018 09:46:1326/11/2018 09:46:13
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited. DTS, the Symbol,
DTS and the Symbol together, and DTS Studio Sound are
registered trademarks and/or trademarks of DTS, Inc. in the
United States and/or other countries. © DTS, Inc. All Rights
Reserved.
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited. DTS, the Symbol,
DTS and the Symbol together, DTS-HD, and the DTS-HD
logo are registered trademarks and/or trademarks of DTS,
Inc. in the United States and/or other countries. © DTS, Inc.
All Rights Reserved.
6
Trademarks
The terms HDMI and HDMI High-De nition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing, LLC in the United States and
other countries.
The Ultra HD Display logo is registered trademark of DIGITAL-
EUROPE
The DVB logo is the registered trademark of the Digital Video
Broadcasting (DVB) project.
The FREEVIEW text and logos are trademarks of DTV Services
LTD. © DTV Services Ltd
SAORVIEW is a registered trademark owned by RTÉ.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio and the double-D symbol are trademarks
of Dolby Laboratories.
The “CI plus” Logo is a trademark of CI Plus LLP.
YouTube and the YouTube logo are trademarks of Google Inc.
The Wi-Fi CERTIFIED Logo and Miracast® are registered
trademarks of Wi-Fi Alliance. Wi-Fi CERTIFIED Miracast™ is a
trademark of Wi-Fi Alliance.
Microsoft PlayReady™
This product contains technology subject to certain
intellectual property rights of Microsoft. Use or distribution
of this technology outside of this product is prohibited
without the appropriate license(s) from Microsoft.
Content owners use Microsoft PlayReady™ content
access technology to protect their intellectual property,
including copyrighted content. This device uses PlayReady
technology to access PlayReady-protected content and/or
WMDRM-protected content. If the device fails to properly
enforce restrictions on content usage, content owners may
require Microsoft to revoke the device’s ability to consume
PlayReady-protected content. Revocation should not a ect
unprotected content or content protected by other content
access technologies. Content owners may require you to
upgrade PlayReady to access their content. If you decline an
upgrade, you will not be able to access content that requires
the upgrade.
Note: Trademarks may vary depending on model.
Initial Document.indd Sec1:6Initial Document.indd Sec1:6 26/11/2018 09:46:1326/11/2018 09:46:13
77
CONTENTS
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Notes about these Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Wall Mounting and Set Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Fitting Wall Bracket Spacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
TV Control Stick and Input Source Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
First Time Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13
Connecting to the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Applications Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Applications Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
TV Menu Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-29
Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Quick Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Picture Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-20
Sound Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Channel Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-23
Network Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-25
Time Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
System Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
About TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Media Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-31
USB/Media Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-30
Miracast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Seven Day Programme Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-33
Freeview Play App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Catch UP TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-36
USB Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Source Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
How to Connect your set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-43
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-45
Updating Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Specifi cations – USB and DNLA Media Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47-48
Quick Lookup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49-50
Initial Document.indd Sec1:7Initial Document.indd Sec1:7 26/11/2018 09:46:1326/11/2018 09:46:13
8
Notes about these Operating Instructions
When following the guidance on how to use the set, use the following notes. Unless otherwise stated,
the remote control is used to operate the set, it will be noted when to use the buttons or control stick on
the set itself.
Notes of interest are shown in boxes throughout this manual.
When a menu option is referred to, this will be in bold.
The following remote control buttons are used to navigate the menus:
[EXIT]: Exits from the menu and returns to the source
[BACK]: Takes you one step back in the menu.
[ARROW BUTTONS]: Navigate around the options on the screen.
[OK]
:
Selects the option highlighted.
This button will shift the character set on the keyboard to capital letters.
Allows the selection of special characters.
Backspace, deletes last character inputted.
Insert a space
Enters password and exits keyboard mode.
Type of keyboard (ENG is English). This can not be changed.
When reference is made to a button to press on the remote control it will be contained within a square
bracket like this [OK]. This would mean press the OK button on the remote control.
For entering Wi-Fi password information an on-screen keyboard is used. To navigate around this, use the
arrow buttons on the remote control, enter the character selected by pressing [OK].
OPERATING INSTRUCTIONS ADVICE
Wi-Fi On Screen Password
Entry Keyboard
Note: It is not recommended to connect external user interface
devices, such as a keyboard or mouse, to this set.
Initial Document.indd Sec1:8Initial Document.indd Sec1:8 26/11/2018 09:46:1326/11/2018 09:46:13
99
Wall mounting
IMPORTANT - Before drilling any holes in the wall ensure you are not drilling where there
could be electrical wires, water or gas pipes.
1) Remove the four screws located at the back of the TV set.
2) The wall mount can now be easily attached to the mounting holes,
located on the back of the TV, using the same four screws removed.
VESA mounting points are located on the rear of the set, see example above.
For optimum viewing, if wall mounting the TV higher than eye level, the TV should be tilted downwards
so that the TV’s screen is ‘face on’. See fi g 1 and 2.
Wall Mounting and Set Security
SECURING THE TV TO A WALL
Securing the TV to a wall with anti-tip straps
For maximum safety in the home, when using a TV with its stand, anti-tip straps should be fi tted. These
are available from major retailers & websites and are an easy, inexpensive and effective way of ensuring
your TV stays safely upright. Straps are designed to be attached to the rear of the TV and then tethered
to the wall or the furniture the TV is stood on, these are fi tted as follows.
The Royal Society for the Prevention of Accidents is urging people to take care with fl at-screen televisions.
RoSPA stated in 2010 that “Toddlers are particularly at risk of pulling fl at-screen televisions on to themselves.
They are unsteady on their feet and are attracted by colourful television images.”
The risk has increased as
televisions become lighter.
A) Using one or both of the top wall-mounting
holes and screws fasten one end of the fastening
cord/s to the TV. (the screws are already supplied in
the wall mounting holes)
B) Secure the other end of the fastening cord/s to
your wall. (you will need screws/fi xings suitable
for your wall type - available separately from most
DIY stores).
fig 1 fig 2
TV
TV
Viewing angle
Viewing angle
INCORRECT
CORRECT
Important: If wall mounting this TV, only use the screws already provided in the wall mounting holes.
Using other screws which are longer could cause irreparable damage to internal parts. When using a
wall bracket, please ensure the screws in the back of the TV set are not over tightened.
Note: Please ensure that children do not climb on or near the TV set.
Note: When handling the set do not grip the LCD Panel.
Note: Do not pull the set when mounted on a bracket. If using a moveable bracket, adjust via the bracket and not the set.
Initial Document.indd Sec1:9Initial Document.indd Sec1:9 26/11/2018 09:46:1326/11/2018 09:46:13
10
Important: Only use the screws provided to mount the set onto a wall bracket. When using a wall bracket,
please ensure the screws in the back of the TV set are not over tightened. Failure to use the correct screws
may lead to damage.
Fitting Wall Bracket Spacers
SECURING THE TV TO A WALL
When wall mounting the TV, ensure that the mains power cable and any other cables connected to
the TV from your external devices do not interfere with your wall bracket. On some models, you will
nd ‘spacers’ in the accessories pack that should be fi tted in between the rear of the TV and the wall
bracket in order to prevent trapping any cables. See Fig 1 below.
4 x Screw including D18 washer
4 x Spacer
These should be used as indicated in the picture below. Ensure that the screws are not overtightened as
this may cause damage to the set.
Note: the wall bracket type
shown in the diagram is for
illustration purposes only,
other brackets may be used
and it is recommended that the
spacers and screws are tested
to see if they fi t correctly
before fi nal assembly.
Note: Spacers and screws are not supplied for all models, refer to the Quick Start Guide for more
information.
Note: Due to the use of rear facing HDMI connectors, right angled HDMI adapters can be utilized to
reduce the space required behind the set to allow the cable to bend safely. There are different types of
HDMI angled connectors, ensure that the one being used is suitable for the cable/socket types.
Fig 1.
Initial Document.indd Sec1:10Initial Document.indd Sec1:10 26/11/2018 09:46:1426/11/2018 09:46:14
1111
TV Control Stick and Input Source Menu
TV Control Stick
The TV control stick is located on the back of the TV. The control stick can be used to control many of the
TV functions. The shape of the TV’s control stick may vary by model.
While TV is in standby mode:
• Press the centre of the control stick once - Power on the TV set
While watching TV:
• RIGHT/LEFT – volume up/volume down
• UP/DOWN – changes channel up/down
• Press the centre of the control stick once – displays the menu
• Press and hold the centre of the control stick – Standby/Power Off
While in menu:
• RIGHT/LEFT/UP/DOWN – navigation of cursor in on-screen menus
• Press the centre of the control stick once – OK/Confi rm selected item
• Press and hold the centre of the control stick – back to previous menu
Choosing Mode Input/Source
Use the source menu to switch between input/connections.
A) Using the buttons on the remote control:
1. Press [SOURCE] - The ‘source’ menu will appear.
2. Press [<] or [>] to select the input you require.
3. Press [OK].
B) Using the TV control stick:
1. Press the centre of the control stick once to enter the TV menu.
2. Press the control stick RIGHT/LEFT and navigate through to ‘SOURCE’ menu.
3. Press the centre of the control stick to enter the ‘SOURCE’ menu.
4. Press the control stick RIGHT/LEFT to scroll through and select the input/source you require.
5. Press the centre of the control stick to select the chosen input/source option highlighted.
For further information on input/connections please view the ‘Connections’ pages.
Control Stick
TV CONTROL STICK
AND INPUT SOURCE MENU
For models with the joystick type controller.
Initial Document.indd Sec1:11Initial Document.indd Sec1:11 26/11/2018 09:46:1426/11/2018 09:46:14
12
First Time Installation
FIRST TIME INSTALLATION
Introduction
When the set fi rst turns on, it
enters the First Time Installation
mode. This can be restarted by
restoring the set to default settings
in the ‘ABOUT TV’ menu
Languages
Select your preferred on-screen
display language. This will change
the language in which the menus
and associated information is
displayed. To change this press
the [MENU] button and then
select Settings > System Menu >
Language
Agreement 1
Agree to the Data Collection
and Firmware update notice.
Agreement 2
Agree to the manufacturers’
Terms of Use. (Only applicable to
Freeview Play sets.)
Country Selection
Select the correct fl ag for the
country in which the set will be
used. This will enable the set to
correctly install the functions
applicable to the country of use.
Environment of Use
Home Mode: For normal use,
by default, it is set to a power
saving mode which reduces
the energy used by up to 25%
(by reducing the power to the
LED/LCD panel). This can be
changed in the picture mode
settings.
Network setup
You can connect the TV to
your broadband router or
wireless network in order to
take advantage of the Smart
functions. If you connect the TV
to your router using an Ethernet
cable (recommended) this step
will be skipped.
Select Wi-Fi Network
Select the Wi-Fi network which
you would like to be connected
to. A padlock symbol next to the
network indicates that it will
require a password to use.
Entering Password
Use the arrow buttons on the
remote control to select the
correct character and then press
[OK] to enter. Press the [GREEN]
button to reveal the password.
Initial Document.indd Sec1:12Initial Document.indd Sec1:12 26/11/2018 09:46:1426/11/2018 09:46:14
1313
Confi rmation of Internet
Connection
If the network has been
correctly authorised, a tick
symbol will appear next to it.
Set Up Netfl ix
If you have a Netfl ix account, it
can be set up on the television
here. Once set up and validated,
the First Time Installation
continues on to the next step.
Default Source
Select the source which you use
the most. If Digital TV (Freeview)
is chosen, then at the next step,
the set will tune in and default
to Digital TV (Freeview). If one
of the other sources is selected,
then the set will not tune in at
this stage and default to that
input. To change this press the
[MENU] button and then select
Settings > Channel
Tune in Channels
Chose to install terrestrial
channels now or later.
Support Advice
Information regarding support is
displayed.
Tuning Progress Indication
Tuning continues and a progress
bar is shown with the number of
channels found indicated below
this.
First Time Installation
FIRST TIME INSTALLATION
Country Selection
When Digital tuning is complete,
select your country of use.
Normally this will only show
one country, unless you are
receiving channels from multiple
transmitters in other countries.
Primary Region Selection
Select the region that you would
like to receive your local news
from.
Secondary Region Selection
Select your nearest or strongest
signal transmitter.
Note:
In Home Mode, the TV will switch itself to the standby mode after 4 hours in the event that the buttons on
the remote control or TV set are not used. This can be disabled in the ‘TIME’ menu.
Store Mode: For store display use. The picture is adjusted to optimum settings. The store demonstration will
appear on the screen automatically after two minutes.
NOTE: These screens only come up if more than one region is found. i.e. two or more transmitters are
tuned in.
Initial Document.indd Sec1:13Initial Document.indd Sec1:13 26/11/2018 09:46:1526/11/2018 09:46:15
14
Connecting to the Internet
CONNECTING TO THE INTERNET
When you fi rst power on your new SMART TV there will be an option to follow various on-screen set
up instructions. These instructions will enable you to connect to the internet via your home network.
You can connect to your home network either wirelessly or with an Ethernet cable.
If you decide not to follow the initial set up instructions and need to connect at a later date please
follow these simple steps below:
Connecting your TV: Wireless Connection
Enter the ‘Network’ menu and ensure that Wi-Fi is selected. Move to Wi-Fi and press [OK] on the
remote control. This will bring up any local Wi-Fi networks, choose the desired network and connect. If
a password is required a prompt and a keyboard to enter it will be displayed.
Connecting your TV: Ethernet/LAN cable
Plug your Ethernet cable into the RJ45 (Ethernet) socket located at the rear of the television.
Initial Document.indd Sec1:14Initial Document.indd Sec1:14 26/11/2018 09:46:1526/11/2018 09:46:15
1515
Applications Menu
APPLICATIONS MENU
The ‘Application’ menu allows you to access the TV set’s “SMART” features. In this menu you can enter
various functions including Web Browser, BBC iPlayer, etc. At the bottom of the screen there are some key
apps for easy and quick access.
To view the next layer of the ‘App’ menu, scroll right and select:
Note: HDR is supported on apps such as Netfl ix and YouTube, and only works if the data being streamed
contains HDR data.
Aquos Net+
Aquos Net+ is a portal which allows access to a variety of apps and multimedia services which the TV
can access via the internet. To enter Aquos Net+ you will be prompted to enter a language and accept
terms and conditions. Once the relevant information has been entered you will be able to use a range of
features such as MUZU.TV, Viewster and Dailymotion.
Content is updated and managed from a central source, so look out for new features and updates.
Note: The position of apps may vary depending on your TV set.
Note: The applications available will be different depending if the set is a Freeview Play model. Refer
to the application list.
Initial Document.indd Sec1:15Initial Document.indd Sec1:15 26/11/2018 09:46:1526/11/2018 09:46:15
Note: Some Apps, such as Netfl ix, require a monthly subscription. This is not included with the purchase
of your TV set.
Note: The appearance and functionality of apps may vary depending upon the revision of the app and
the platform it is designed to be used on. On-demand players may also change depending upon the
region in which the set is tuned into.
16
Applications Guide
Applications Available on Freeview Play Models
Netfl ix Allows access to fi lms, boxsets and other streaming videos via your Netfl ix
account. Note that you will have to set up your own Netfl ix account to access
this application as subscription is not included with the set.
BBC iPlayer Enjoy BBC iPlayer exclusives and your favourite BBC programmes from the last
30 days.
YouTube Video sharing website allows you to discover, watch and share originally
created videos.
BBC News Access the BBC News app for up-to-the-minute and breaking news reports.
BBC Sport The BBC Sport app offers the latest sports news, live action and scores.
Aquos Net+ Portal More appliations.
ITV Player The ITV Hub, new home of ITV on demand. Enjoy the best telly anytime,
anywhere.
Channel 4 (All 4) The latest ‘‘Catch Up’’ plus a huge library of shows from 4, which includes
complete box sets.
Demand 5 Watch full episodes of your favourite Channel 5 programmes when it suits you.
UK Play TV ‘Catch Up’’ on your favourite Dave, Really, Yesterday and Drama shows with
Freeview Play Access the Freeview Play app. Please see the ‘FREEVIEW PLAY
App page for further information.
APPLICATIONS GUIDE
Applications Available on Non-Freeview Play Models
Netfl ix Allows access to fi lms, boxsets and other streaming videos via your Netfl ix
account. Note that you will have to set up your own Netfl ix account to access
this application as subscription is not included with the set.
BBC iPlayer Enjoy BBC iPlayer exclusives and your favourite BBC programmes from the last
30 days.
YouTube Video sharing website allows you to discover, watch and share originally
created videos.
BBC News Access the BBC News app for up-to-the-minute and breaking news reports.
BBC Sport The BBC Sport app offers the latest sports news, live action and scores.
Aquos Net+ Portal More applications.
Web Browser Application for accessing websites via the internet. Use the following buttons
for navigation in the browser:
CH+ Scroll page up
CH- Scroll page down
Red Button Show/hide browser menu bar
Yellow Button Zoom in
Blue Button Zoom out
YouTube
Initial Document.indd Sec1:16Initial Document.indd Sec1:16 26/11/2018 09:46:1526/11/2018 09:46:15
In this area, you can adjust your television to your preferred settings. Refer to the next pages to correctly
set up your Sharp television to your preferred settings.
To enter the ‘Settings’ menu press the [MENU] button followed by [UP], then scroll to the settings option
by using the [RIGHT] arrow key.
Quick Settings Allows you to quickly access some of the most useful functions on the set.
Picture
Enables control of the picture settings to ensure optimal performance and
personal preference settings to be stored.
Sound Controls the individual sound settings on the television.
Channel Set up your channels and tuning.
Network Connection to your Wi-Fi or Ethernet network.
Time Gives control over all the time and date functions on the set.
System Provides access to the overall system controls within the television.
About TV Shows relevant information about the set and its functions.
1717
TV Menu Operation
SETTINGS MENU
Initial Document.indd Sec1:17Initial Document.indd Sec1:17 26/11/2018 09:46:1526/11/2018 09:46:15
This menu allows you to quickly access the most popular functions on the set without having to navigate
through the various menus.
To enable controls within the lock menu, the function needs to be enabled by turning on the System Lock.
Playback fi les from Record list
To playback recorded fi les you will be required to have the TV set to the Freeview/Saorview source mode.
Once set to the correct source, access the recorded list by pressing the [REC LIST] (Recorded List) button
on the remote control or select the record list from the ‘Quick’ menu, the Recorded List should now
appear on the screen. Use the arrow buttons on the remote control to navigate to the recording you wish
to playback and then press [OK] on the chosen file to start playback.
Use the coloured buttons on the remote
control for the following options:
• Press [RED] to delete a selected
recording.
• Press [GREEN] to sort the items in the
record list by date.
• Press [YELLOW] to sort the items in the
record list by name.
• Press [BLUE] to enter the schedule list.
Audio Track Allows you to choose between the audio channels being transmitted on Digital
Television. Currently for Freeview only normal sound or the Audio Description audio
channels can be selected.
Subtitle Turn subtitles on and off. Subtitles can also be turned on and off by using the
[Subtitle] button on the remote control.
Subtitle Track Appears when Subtitles (above) are turned on and allows you to select which
subtitle track is to be used. There may be more than one sub-title available for use,
i.e. English Subtitle or Hearing Impaired subtitle.
Teletext Turn Teletext on or off. This can also be achieved by pressing the [Teletext] button
on the remote control.
Record List Shows a list of recorded TV programmes via a connected USB memory stick or USB
hard drive. While in the ‘Recorded List’, press the [BLUE] button to access the
‘Schedule List’. Refer to the ‘USB RECORD’ page for further information.
Schedule List The schedule list allows you to view your reminders and recordings.
There are two icons, the clock symbol denotes a reminder, the camera indicates a
recording. To select use the [UP] and [DOWN] arrow buttons.
Note: Recording is only possible when a USB stick is plugged in and formatted at FAT32. VIsit the
‘USB RECORDING’ page for more information.
18
TV Menu Operation
QUICK SETTINGS MENU
Initial Document.indd Sec1:18Initial Document.indd Sec1:18 26/11/2018 09:46:1526/11/2018 09:46:15
Picture Mode
To enable fast setting of the desired picture performance the following options can be selected by
pressing the [PICTURE] button on the remote control:
Economy Power saving mode which reduces the energy used by up to 25% (by
reducing the power to the LED/LCD panel). In Economy mode, the TV will
switch itself to Standby mode after 3-5 hours in the event that the TV
buttons or remote control buttons are not pressed (change the picture mode
to another setting to de-activate this function) In the economy mode the
brightness of the picture may be reduced.
Standard Standard settings
Personal Allows you to change the picture settings to your personal preference. These
settings are saved automatically.
Dynamic Recommended settings for fast moving pictures.
Movie Picture has less colour and is darker.
You can make the following adjustments in Personal mode:
Brightness Increase or decrease the brightness of the picture. Range: 0-100
Contrast Switch the balance between black and white. Range: 0-100
Colour Changes the picture between colour and black and white. Range: 0-100
Sharpness Increase or decrease the sharpness of the picture. Range: 0-100
Colour Temperature Choose from the following:
Standard Default settings.
Warm Increases red within the picture.
Personal Your own settings.
Cold Increases blue within the picture.
1919
TV Menu Operation
PICTURE MENU
For complete control of your picture settings, enter the ‘Picture’ menu to set up the following
adjustments. These will allow you to enhance your viewing experience and utilise the full capability of
the television.
Initial Document.indd Sec1:19Initial Document.indd Sec1:19 26/11/2018 09:46:1626/11/2018 09:46:16
20
Zoom1 and Zoom2
16:9
The picture
is the correct
proportion
but zoomed
in to fi ll the
screen
Auto
Automatically displays the best picture format so
the picture is in the correct position. Black lines may
appear at the top/bottom and/or sides.
4:3
Full Screen
Displays the 4:3
picture in its
original size.
Side bars are
shown to fi ll the
16:9 screen
Displays a picture in
the full screen mode
without overscan.
16:9 signal will be
displayed in original
proportion. Other
picture format will
be stretched to fi ll
the screen
Fills the screen with
a regular 16:9 signal
and 4:3 picture
format will be
stretched to fi ll
the screen
Aspect Ratio - Within the UK the picture format varies depending on the channel/broadcast. There are a
number of different options to best meet your needs;
Dot by Dot
Will display the picture in its original resolution without
any change, only available in HDMI input source
TV Menu Operation
Expert Settings
Noise Reduction Off, Low, Medium, High.
Gamma Changes the range of the colour reproduction. Low, Medium and
High.
Active Contrast Allows for the contrast level to be adjusted automatically
depending on picture content. ‘ON’ or ‘OFF’.
Backlight Switches optimization of the backlight and contrast of the picture. Range: 1-100
Red Adjust the amount of red in the picture. Range: 1-100
Green Adjust the amount of green in the picture. Range: 1-100
Blue Adjust the amount of blue in the picture. Range: 1-100
CMS Hue This is a standard to adjust the colour either more reddish or more
bluish in tone. R/G/B/C/M
Range: -63 to 63
CMS Value A higher value makes the image brighter. A lower value makes the
image darker. R/G/B/C/M
Range: -32 to 31
CMS Saturation Increases or decreases the saturation of a selected colour.
R/G/B/C/M
Range: 0 to 15
Use these adjustment
settings to improve the
picture in more detail.
Auto
• 16:9
• 4:3
• Zoom 1
• Zoom 2
Initial Document.indd Sec1:20Initial Document.indd Sec1:20 26/11/2018 09:46:1626/11/2018 09:46:16
2121
SOUND MENU
Sound Mode - To enable fast setting of the desired sound mode one of the following options can be selected by
pressing the [SOUND] button on the remote control:
Standard Default settings
Music Emphasises music over voices
Movie Provides live and full sound for movies
Sports Emphasises sound for sports
Personal Allows you to change the sound settings to your personal preference. These settings
are saved automatically.
DTS Studio Sound- Choose from the following options:
Off Disables the DTS Studio Sound audio feature
On Studio Sound creates an immersive, feature-rich surround sound experience
from two speakers, complete with rich bass, high frequency detail and clear dialog.
DTS DRC (Dynamic Range Control)-
OFF Disables the DTS DRC feature.
ON Adjusts the level of dynamic range for DTS movie soundtracks. Very loud sounds get
quieter and quiet parts get louder. Recommended for midnight listening.
Speaker -
Digital Audio Output Switch between Auto, PCM or RAW.
Digital Audio Delay Delay the sound in relation to the picture on the digital
output.
Audio Delay (ms) Delay the sound in relation to the picture on the audio
output (speaker, headphone, etc.)
Range: 0 - 250.
Auto Volume Level -
ON When ‘ON’ is selected, the volume will attempt to stay at a constant level regardless of TV
programme and advertisements.
OFF Switches Auto Volume off.
Expert Settings -
Balance To switch the sound between the left and right speakers. Range: -50 to 50.
Equalizer Function Enables you to adjust the frequency characteristic of the
sound output for the following ranges: 100Hz, 500Hz,
1.5kHz, 5kHz, 10kHz.
Range: -10 to 10.
Audio Description Allows you to switch Audio Description ‘ON’ or ‘OFF’. This
provides a description of what is happening during the
selected programme for a person who is visually impaired.
This feature is not available on all programmes.
ON Switches Audio description on. AD
Volume Control is activated.
OFF Switches Audio Description off.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS and
the Symbol together, and DTS Studio Sound are registered trademarks and/or trademarks of DTS, Inc. in the United States and/or
other countries. © DTS, Inc. All Rights Reserved.
For complete control of your audio
settings, enter the ‘Sound’ menu to
set up the following adjustments.
These will allow you to enhance your
listening experience and expand the
full capability of the television.
TV Menu Operation
Initial Document.indd Sec1:21Initial Document.indd Sec1:21 26/11/2018 09:46:1626/11/2018 09:46:16
DVB Antenna Selected input antenna type.
Auto Scan Allows you to retune the television for all digital channels, digital radio
stations and analogue devices.
Tuning Mode Digital, Analogue and Digital + Analogue.
Auto Tuning When selected, the set will start tuning.
Digital Manual Tuning Allows you to manually tune your digital signal by selecting the channel
number. Press [OK] to start.
Digital Smart Retuning Enables the set to retune those channels already stored.
Auto Update Channel
List
Can be set to “ON” or “OFF”.
HbbTV Allows interactive services like BBC red button+ using Digital TV broadcasting
when connected to the internet.
LCN Logical Channel Number. When turned on, digital stations will be in order.
Standby Scan When the TV is put into standby mode a standby scan will be performed,
during this process the TV will scan for new channel information and
automatically update the channel list if any changes are found, both the
visual and audio functions will be off, once the scan is complete the TV will
stay in standby mode.
CI Information Pay per view services require a “Smartcard” to be inserted into the TV. If you
subscribe to a pay per view service the provider will issue you with a ‘CAM’
and a “Smartcard”. The ‘CAM’ can then be inserted into the COMMON
INTERFACE PORT (CI Card In).
Important: To receive Freeview/Saorview channels, in particular HD channels, you will need a Digital TV
aerial and be in a good Freeview/Saorview coverage area. You can check the coverage for your area at
www.freeview.co.uk or www.saorview.ie
Note: Any Freeview HD channels found during tuning will be placed in channel positions above 100. For
example, 101 (BBC1 HD) 102 (BBC2 HD) etc.
Note: Freeview channels are only available in the UK, Saorview channels are only available in the ROI.
22
CHANNEL MENU
TV Menu Operation
Use of the ‘Channel’ menu allows for
setting the TV up to receive incoming
aerial signals.
Note that this menu will change
depending on which aerial source is
being used. These options include:
• Terrestrial Digital Television
• Cable Digital Television
• Satellite Digital Television
• Analogue Television
Initial Document.indd Sec1:22Initial Document.indd Sec1:22 26/11/2018 09:46:1726/11/2018 09:46:17
2323
TV Menu Operation
Allows you to view signal frequency, signal quality and
signal strength.
Quality - How good the signal is.
Strength - How strong the signal is.
If the signal is strong, but the quality is low, there will
be reception issues.
Analogue Tuning
When the source is changed to Analogue, the tuning
menu will have the following options:
Auto Scan Allow the set to tune automatically into analogue stations.
Analogue Manual Tuning Direct tuning of analogue stations.
Satellite Tuning
When the source is changed to Satellite, the tuning menu will have the following options:
Satellite Tuning:
Antenna Setup Type of reception being received.
Channel Type Allows only all channels, locked channels or free channels to be
selected. Options are Free+Scramble, Scramble, Free
Service Type All, Radio or DTV.
Scan Mode Default, Network Scan or Blind Scan.
Auto Tune Tunes the set automatically.
Auto Update Channel List Enables the set to re-tune those channels already stored.
HbbTV Allows interactive services using Digital TV broadcasting when
connected to the internet.
LCN Logical Channel Number. When turned on, digital stations will be in
order.
CI Information Pay per view services require a “Smartcard” to be inserted into the
TV. If you subscribe to a pay per view service the provider will issue
you with a ‘CAM’ and a “Smartcard”. The ‘CAM’ can then be inserted
into the COMMON INTERFACE PORT (CI Card In).
Signal Information Will show the condition of the received satellite signal.
Note: If channels are tuned in on satellite, other tuning modes are not possible.
Signal Information
Initial Document.indd Sec1:23Initial Document.indd Sec1:23 26/11/2018 09:46:1726/11/2018 09:46:17
24
NETWORK MENU
TV Menu Operation
Set up and control your network and
internet access here.
There are two ways to connect to your
local network, in most cases this will
be the router used to connect to the
internet.
The following options are available for both Wi-Fi and wired connections in the ‘Network’ menu.
Network Select the type of network connection – Ethernet (Cable) or Wi-Fi
(Wireless).
Network Test Allows the network connectivity to be tested.
Network Information Gives information about your network.
When Wi-Fi is selected, the options below are shown in the menu:
Wi-Fi This advises the connection status of the Wi-Fi network. If [OK] is
pressed, another menu opens which shows all Wi-Fi networks which the
set can detect. Select the one which you want to connect to and press
[OK].
If the network is locked, the screen will now show a password entry
screen with an on-screen keyboard.
Select ‘Refresh’ to update list of available networks.
Use the arrow buttons to select the character required.
Pressing the [GREEN] button will display the password; this is defaulted to show “*” for security.
Capitals are selected by pressing caps key on the on-screen keyboard.
Special characters can be selected using “.,?” keyboard button.
Once password is entered, select Enter and press [OK]. Then select OK (on screen) and [OK] on remote.
Tick appears next to network if connected.
WPS: Select and press WPS button on router
Push Button Method Select and requests to press button on router
Generate Security
PIN
Select and PIN generated for router.
When Ethernet is selected, the options below are shown in the menu:
Ethernet This advises the connection status of the wired (Ethernet) network. If [OK] is
pressed, another menu opens which allows for the connection to an IPv4 or IPv6
wired network:
On screen password
entrykeyboard.
Initial Document.indd Sec1:24Initial Document.indd Sec1:24 26/11/2018 09:46:1726/11/2018 09:46:17
2525
NETWORK MENU
TV Menu Operation
Auto This is also known as DHCP, use this setting to automatically set the IP address
of your television via the router.
Manual Manually set press [OK] when on function and then use arrow keys to manually
edit setting.
IP Set the IP address.
Netmask Set the Netmask address.
Gateway Set the Gateway address.
DNS Set the DNS address.
OK Press to enter options selected.
Disabled Disable IPv4.
Auto This is also known as DHCP, use this setting to automatically set the IP address
of your television via the router.
Manual Press [OK] to edit, keypad is displayed to enter data. When fi nished select
‘enter’ and press [OK].
IP Set the IP address.
Prefi x Adjust in the range 1 to 128 using the RIGHT/LEFT arrow buttons.
Gateway Set the Gateway address.
DNS Set the DNS address.
OK Press to enter options selected.
Disabled Disable IPv6.
IPv4
IPv6
Initial Document.indd Sec1:25Initial Document.indd Sec1:25 26/11/2018 09:46:1726/11/2018 09:46:17
26
TIME MENU
TV Menu Operation
Any time related function
can be set or seen here.
When the time is selected using the [UP/DOWN] arrow buttons and [OK] is pressed, the following options
appear:
TIme:
Auto Sync Turn on to synchronise the time to the incoming digital television signal. If
connected to the internet, the clock will be updated from here. Turn off to
set the clock manually.
Time Zone Adjustment of the time offset. Use the [UP/DOWN] arrow buttons on the
remote control to change the setting.
Daylight Savings Cannot be set in Freeview mode as this information is taken from the
Freeview transmission. Allows 1 hour offset from GMT.
On Time Allows you to set a specifi c time for your TV to turn on, the channel it will
then display, the source it will be on and also the volume. This function can
then be toggled to repeat every day or a certain day. If your set is in standby
and the on time is reached, it will turn on.
On time Allows you to set a specifi c time for your TV to turn on. Use
arrow buttons to select the option and [OK] to set.
Input Source Select the source which the television should turn on and
display.
Digital Channel Type Only applicable for DTV. TV, Radio or Data can be selected.
Channel Use the [RIGHT/LEFT] arrow buttons to select number.
Volume Sets volume which the set comes on at.
Off Time Allows you to set a specifi c time for your TV to turn off. Use arrow buttons
to select the option and [OK] to set.
Sleep Timer Lets you set the sleep timer so the television automatically switches off after
a set amount of time. Options are; Off, 15min, 30min, 45min, 60min, 90min,
120min or 240min.
Auto standby Controls the amount of time the set will continue to operate without any
buttons being pressed on the set or remote control before going into
standby. Options are OFF, 3 hours, 4 hours or 5 hours.
OSD Timer Lets you adjust the amount of time the on-screen Menu stays on before
disappearing. Option are; Never, 10S, 20S, 30S or 60S. (S = Seconds.)
Initial Document.indd Sec1:26Initial Document.indd Sec1:26 26/11/2018 09:46:1726/11/2018 09:46:17
Menu Language Set the language used in the on-screen display, menus etc.
Primary Audio Language Set the audio track for Digital Television
Primary Subtitle Language Set the on-screen subtitle language.
Lock Set the lock function on your set.
Set Password Set the audio track for Digital Television
Channel Lock Set the on-screen subtitle language.
Parental Guidance Set the parental guidance level.
The default password is “0000”
Note: Only languages which are being transmitted can be selected.
2727
SYSTEM MENU
TV Menu Operation
Set up system control
options in this menu.
Language
Set your preferred languages.
Lock
CEC Control Turn on or off.
Device Auto Power Off Enable automatic device power off when television turns off.
TV Auto Power On Enable television turning on from standby when HDMI source powers up.
HDMI ARC Turn ARC functionality on or off. ARC (Audio Return Channel) allows
sound to be outputted via the HDMI connection. This can be fed into an
audio device for an enhanced listening experience.
HDMI 2.0 Format Standard Can only be selected when on HDMI input.
Detect Show list of connected HDMI devices.
HDMI CEC
Set up the HDMI functionality of the set
Source Re-name You can re-name each source to your desired name.
Expert Settings:
PVR & Time-shift Settings: (PVR settings are only visible when USB stick is plugged in.)
Disk Displays the USB device.
Select Partition Shows the partition being used.
Timeshift Amount of memory allocated to time shifting –
512MB, 1GB, 2GB or 4GB.
Format Format the connected device.
Speed Check Check that the speed of the connected memory if
okay.
Hearing Impaired Enhanced subtitles used if transmitted.
Network Wake Up Allows the set to turn on via network control.
Store Mode Turn the store mode on or off. Selecting this mode will disable the
economy mode and bring up functions on specifi cation on screen display
after 30 seconds of use.
Advanced Settings
Initial Document.indd Sec1:27Initial Document.indd Sec1:27 26/11/2018 09:46:1726/11/2018 09:46:17
Help Information Shows the set name and software version.
Model Model number of your set.
Software Version Date of the software revision” to “Displays the
software revision number and the date/time of
revision.
Helpline Tel. Number Your Sharp Helpline telephone number.
Email Address Your Sharp Helpline email address.
Website Sharp website.
Online Manual View the online Operating Instructions.
System Upgrade Allows you to update your set.
Software Update (USB) Update the set
OAD Initiate an Over Air Download
OAD Scan Scan for an Over Air Download
Internet Update Check Check for a network update.
NetReady Information NetReady allows control of OTA updates.
Reset TV Restore the television.
Netfl ix ESN Key Shows the Netfl ix ESN Key code.
Netfl ix Version Version of Netfl ix software.
Netfl ix Deactivate Deactivate Netfl ix on this set.
Netfl ix Terminate Delete Netfl ix login information on this set.
View End User Licence Shows the End User Licence.
28
ABOUT TV
TV Menu Operation
Initial Document.indd Sec1:28Initial Document.indd Sec1:28 26/11/2018 09:46:1726/11/2018 09:46:17
USB and Media Server
The USB media and the Media Server offer the playback of various different types of content that is either
saved on your USB memory stick or external media server. (USB mode allows you to view/playback fi les
from an external USB device and Media Server connects to your home network and can view/playback fi les
from your compatible laptop, PC, tablets and smart phones).
When accessing the USB media or media server features the below menu screen will appear. The content
will be divided into Photo, Music, Movie and All.
Note: If you experience a playback issue, please ensure the fi les being used are the correct format (example
- the picture plays but no sound) See the ‘Compatible fi le types for USB playback’ section at the rear of
these Operating Instructions.
1) You can navigate through the menus using the [ARROW BUTTONS] on the remote control, to confi rm
the item you wish to play/view press the [OK] button (the USB1 and USB2 options will only show when a
USB stick is connected).
2)
USB mode - Select the USB drive (If your
drive only has 1 partition you will only see 1
item).
Media Server - Select the external device
that you would like to access. You can now
access the item. Press [OK] to view.
2929
MEDIA MENU
TV Menu Operation
Select other input data source from this menu:
Initial Document.indd Sec1:29Initial Document.indd Sec1:29 26/11/2018 09:46:1726/11/2018 09:46:17
Note: If you experience a playback issue, please ensure the fi les being used are the correct format
(example - the picture plays but no sound). See compatible fi le types for USB/DLNA page for compatible
le types.
Note: USB extension cables are not recommended as they can cause a reduction in picture/audio quality
and stoppages during play back of USB content.
3) Whilst viewing your media, you can control
the item by using the remote control playback
buttons or by pressing [INFO] you can access the
on-screen playback menu, you can now make
your selection by using the [ARROW BUTTONS]
and [OK] buttons on the remote control.
30
TV Menu Operation
Initial Document.indd Sec1:30Initial Document.indd Sec1:30 26/11/2018 09:46:1726/11/2018 09:46:17
MEDIA MENU
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll buttons.
To confi rm any settings press [OK] button. To exit this menu at any time, press [EXIT] button.
Although the TV has many of the most popular Apps preinstalled, the Miracast function allows almost
unlimited Apps to be shown on the TV screen including many on demand videos, subscription based
services and your favourite applications such as Emails and Facebook.
The Miracast (screen mirroring) feature allows you to connect to a compatible Smartphone, Tablet, PC or
Laptop wirelessly and ‘mirror’ what is on your device onto the TV’s screen.
See below an example of a connection to a Laptop PC running Windows 10 that has built in Wireless
Display.
For connection to other types of devices please refer to the instruction manual that came with your
device.
Click on the monitor icon
(circled below) to access
this feature.
Once you’re connected,
you will see this screen on
your Laptop/PC.
Note: Many Android and Windows devices support screen mirroring. For Apple devices, you need a
separate Apple TV box to allow screen mirroring onto non Apple products.
Note: If your smartphone or tablet does not include mirroring, it may be possible to connect a suitable
cable from your device directly to one of the HDMI inputs on the rear of the TV. Suitable cables for your
device should be available from a local electronics retailer.
Once a successful connection
is made, your TV will display
this screen.
Miracast (Screen mirroring)
3131
TV Menu Operation
Initial Document.indd Sec1:31Initial Document.indd Sec1:31 26/11/2018 09:46:1826/11/2018 09:46:18
Catch Up is only
applicable to sets
with Freeview Play.
(Freeview Play)
32
Seven Day Programme Guide
7 DAY TV GUIDE AND CHANNEL LIST
Note: Freeview HD channels found during tuning will be placed in channel positions above 100, for
example, 101 - BBC 1 HD, 102 - BBC 2 HD etc.
TV Guide is available in Saorview/Freeview TV mode. It provides information about forthcoming
programmes (where supported by the Saorview/Freeview channel). You can view the start and end time of
all programmes and on all channels for the next 7 days and set reminders.
1) Press the [TV GUIDE] button on the remote control and the following 7 Day TV Guide will appear:
2) Navigate through the menu using the [ARROW BUTTONS].
You can now:
Press [INFO ] to view further information about the programme highlighted.
Press the [FREEVIEW PLAY] button to access the Freeview Play app. Refer to the ‘Catch Up’ menu page for
further information.
Press the [INFO] button on a highlighted programme to use the record function. (Function for PVR models
only, USB device must be connected):
3) Press [EXIT] to exit the 7 day TV Guide
Watch Now Only applicable when the play
symbol shows up, will play back
via the on-demand player.
More Details View further information about
the programme highlighted.
Record Will allow you to set a recording
for this time.
Reminder Will allow you to set a reminder
for this time.
- To be
recorded on
Catch Up.
- Already
recorded on
Catch Up.
Setting Recordings and Schedule Reminders
While in the Programme Guide, it is possible to Record a programme or set a reminder. Use the arrow keys
on the remote control to select the programme you would like to record or set a reminder for and then
press the [OK] button. This will bring up the menu as shown below:
Watch now will only appear if the symbol appears on the programme name. This means that it has
already been recorded by an on-demand player. When selected the programme will playback using the
on-demand player for the channel.
Initial Document.indd Sec1:32Initial Document.indd Sec1:32 26/11/2018 09:46:1826/11/2018 09:46:18
Non-Freeview Play 7 Day Guide
3333
Seven Day Programme Guide
Note: When the TV set is on, a reminder message will be displayed informing you that a programme is
about to start. If the set is in standby, then it will turn on at the reminder time.
Note: When recording in standby mode, the set will not turn on. While recording in standby, the light
on the front of the set will flash.
Note: Record functions are only applicable to sets with a built in USB Record/PVR function.
To Record a Television Programme
To record a programme, select ‘Record’ and the display
will change as shown on the right. This allows for the
time and frequency of the recording to be set as desired.
Once adjustments to the time and frequency have been
set, save the instruction. This will now appear in the
schedule list as a recording to be made.
If a current programme is set for recording, the start
time will be set a minute in the future to allow settings
to be made and saved.
To Set a Reminder for a Television Programme
To set a reminder, select “Remind” and the display will
change as shown on the right. This allows for the time
and frequency of the reminder to be set as desired. Once
adjustments to the time and frequency have been set,
save the instruction. This will now appear in the schedule
list as reminder
Reminders cannot be set for programmes currently being
transmitted.
To view the list of scheduled reminders got to Quick
Settings and select Schedule List, the screen to the right
will be shown. This will indicate which reminders have
been set and when. Press the [MENU] button to edit.
Non-Freeview Play models will display the Programme Guide as shown below.
Initial Document.indd Sec1:33Initial Document.indd Sec1:33 26/11/2018 09:46:1826/11/2018 09:46:18
Only applicable to sets with Freeview Play.
34
Freeview Play Menu
FREEVIEW PLAY APP
Picture is for illustration only, actual remote
control may be different.
When in the Freeview Play application, it is possible to search for a programme by name. Choose the
“Search everything” option and then use the on-screen keyboard to type in the programme name. As you
type, selections will appear. Select one of these options to start watching.
Note: To use the full functionality of Freeview Play your set must be connected to the internet.
Freeview Play brings together live TV viewing with ‘‘catch up’’ TV services from broadcasters such as BBC,
ITV, Channel 4 and Channel 5. The Freeview Play Explore app features a carousel of genres to select from
when searching for programmes, such as sport, comedy, dramas & soaps, etc. Content is made up from
recommendations of the major broadcasters and offers an alternative means of searching.
To access Freeview Play simply press the [FREEVIEW PLAY] button
on your remote control (fi g1). Freeview Play can also be accessed
via the ‘7 Day TV guide’ menu and the ‘Apps’ menu. When you
rst access Freeview Play you will need to accept the Terms of
use simply select ‘OK’ to confi rm. Once selected the Freeview
Play on demand apps will appear on the screen. Use the buttons
on the remote control to select your chosen app and press OK.
Note: Some apps require additional registration, this is a simple
process and it will inform you of the correct website to visit to
complete the registration.
Areas receiving Saorview transmissions will not support Freeview
Play or Freeview Play services.
Initial Document.indd Sec1:34Initial Document.indd Sec1:34 26/11/2018 09:46:1826/11/2018 09:46:18
Only applicable to sets with Freeview Play.
3535
CATCH UP TV
Catch Up TV
The ‘Catch Up’ menu allows you to access available programmes from the last 7 days, that you may have
missed.
The ‘Catch Up’ menu will show programmes, by day, in the order that they were broadcast (descending in
time order).
On the right there is a channel list, move through this to see the programmes applicable to that channel.
View more information on the highlighted programme by pressing the [INFO] button.
Note: Areas receiving Saorview transmissions will not support catch up services.
1) To access the ‘Catch Up’ menu, fi rst you will need to access the 7 day TV guide, access this by pressing
the [TV GUIDE] button on the remote control, when the 7 day TV guide appears press the [RED] button or
scroll left to access the catch up menu screen
2) You can navigate through the menu using the [ARROW BUTTONS] on the remote control.
To play a highlighted programme simply press [OK] on the remote control. By pressing [BACK] or [EXIT] on
the remote control will take you back to the ‘Catch Up’ menu. Pressing [BACK] or [EXIT] again takes you
out of the programme guide and back to standard TV.
Whilst in the ‘Catch Up’ menu you can also
• Access the Freeview play app by pressing the [FREEVIEW PLAY] button.
• Access the 7 day TV guide by pressing the [RED] button.
3) Press [EXIT] to exit the ‘Catch Up’ menu
Initial Document.indd Sec1:35Initial Document.indd Sec1:35 26/11/2018 09:46:1826/11/2018 09:46:18
36
CHANNEL LIST
Catch Up TV
To activate the channel list, press the [OK] button on the remote control when on a DTV channel. This
allows you to quickly select a channel to watch – select the desired channel by using the up and down
arrows or the Channel +/- buttons on the remote control. Press [OK] to watch.
While in this menu the following two options can be selected.
Filter Channels; press [INFO] This allows you to fi lter the channels shown in the channel list by type.
Select from All, Favorites TV, HD, Data or Radio
Edit Channels; press [MENU] Entering this function allows you add channels to your favorite list,
skip or delete channels. Use the arrow buttons to select the option.
Favorite Add a channel to your favorite list by pressing [OK]
when on the desired channel. Press again to remove
from favorite list. Favorites can be selected in normal
Digital Television mode by pressing the [FAV] button.
Skip When in the Digital Television mode, and using the
Channel +/- buttons, the selected channel will be
skipped. Select a channel to be skipped by pressing
the [OK] button, to deselect press the [OK] button
again.
Delete Permanently delete channel. Can only be recovered
by retuning. To select a channel for deletion, press
the [OK] button.
Lock Will only appear when lock is enabled in lock menu.
Locks the channel that you are on.
Note: If channels are moved or deleted, any settings made to record on that channel will not work.
Initial Document.indd Sec1:36Initial Document.indd Sec1:36 26/11/2018 09:46:1826/11/2018 09:46:18
REC LIST
PVR/MEDIA
One Button Record
At any point in time you may decide to record the current
programme that you are watching. To do this you need to
press the red record button on the remote control.
Note: Record functions are only applicable to sets with the built in USB Record/PVR function.
3737
USB RECORDING FREEVIEW AND SAORVIEW ONLY
USB Recording
Recommended Minimum Specifi cation - USB Memory Stick
Read Speed 20 Mb/s (Megabits Per Second) If you wish to use a USB portable hard
drive larger than 32GB, please refer to
the FAQ section at the rear of this user
guide.
Write Speed 6 Mb/s (Megabits Per Second)
The USB Record/PVR function is only available in Freeview/Saorview mode and only when used in
conjunction with a compatible USB memory stick or USB hard drive. The benefi ts of this are as follows:
• Pause live TV and then playback, rewind and fast forward (up to live TV).
• One button record, if you decide you want to record the current programme.
• Easy recording from the 7 Day TV Guide.
Due to the nature of the product, it is necessary to use a high-speed USB memory stick (as the TV reads
from and writes to the memory stick at the same time, some memory sticks may not be suitable).
You can purchase high speed memory sticks from some computer stores, alternatively, we have a selection
of tested and compatible memory sticks available to purchase directly from the Helpline/website.
Pause Live TV (Time Shift)
A USB memory stick/hard drive must be connected to the TV in order to use this feature.
- Press the [PLAY/PAUSE] button and the television will pause and the live content will be recorded. To
resume watching press [PLAY/PAUSE] again.
- Press [FAST FORWARD] to go forward in a recording.
- Press [FAST REWIND] to go back in a recording.
Note: When you switch the TV to standby or change channel the ‘Time Shift’ memory is wiped. To
restart time shift you must press [PLAY/PAUSE] button.
Note: If channels are moved or deleted, then the USB Record/PVR will not function correctly.
Note: This television contains one TV tuner, therefore it can only record the channel you are watching
or record one channel while the television is in standby mode.
Note: USB Record/PVR record function is only available in Digital/Freeview TV mode. Due to copyright
laws and illegal copying/recording it is not possible to record to/from any other input/output source.
Note: Recorded content can only be played back on the device that recorded it. It is not permitted (or
possible) to watch content recorded on the TV from Freeview/Saorview on another device.
Initial Document.indd Sec1:37Initial Document.indd Sec1:37 26/11/2018 09:46:1926/11/2018 09:46:19
Digital TV Select this input to watch Digital Television from your local
transmitter. The set must be tuned into watch programmes.
Refer to the ‘Channel’ menu section of these Operating
Instructions for information on how to tune your set into
digital channels.
DVB-S Satellite tuner input. If a satellite aerial is connected and the
set tuned to these channels, select this input to view them.
HDMI 1 First HDMI input.
HDMI 2 Second HDMI input.
HDMI 3 Third HDMI input.
Component Y/Pb/Pr input. Audio is connected to the set via the AV input
connector.
SCART SCART input connectivity.
AV Component input. Audio is connected to the set via the AV
input connector.
Analogue Analogue tuner input.
38
SOURCE MENU
Source Menu
Note: Inputs may vary depending on your television specifi cation.
Note: If the inputs have been renamed, they will not appear as shown above.
Initial Document.indd Sec1:38Initial Document.indd Sec1:38 26/11/2018 09:46:1926/11/2018 09:46:19
3939
CONNECTIONS
How to Connect Your Set
Scart
AV in
Connection example for TV models with Mini-AV input (1)
Connecting to a device with SCART output
TV source should be set to SCART
L (white)
R (red)
Video
(yellow)
L (white)
R (red)
Video
(yellow)
Scart
Scart
L (white)
R (red)
Video
(yellow)
AV in
Connection example TV models with Mini-AV input
Note: The TV input/output connections and connecting cables on these pages are shown for reference .
Cables are available separately from your retailer. Not all connections are available on all TV models.
Connecting to a device with Composite AV/Video output
TV source should be set to Composite/AV
Connection example for TV models with SCART input
Connection example for TV models with AV input
Initial Document.indd Sec1:39Initial Document.indd Sec1:39 26/11/2018 09:46:1926/11/2018 09:46:19
40
How to Connect Your Set
CONNECTIONS
L (white)
R (red)
Video
(yellow)
Scart
Scart
AV in
Connection example for TV models with Mini-AV input (2)
Connection example for TV models with L/R Audio and Video inputs
Connecting to a device with Component/YPbPr output
If you are supplied with a cable from the device which has RED, GREEN, BLUE, RED & WHITE connectors
you must connect via Component (for picture) and by Phono cable (for sound). TV source should be set to
Component/YPbPr
AV in
YPbPr
Y (green)
PB (blue)
PR (red)
Video (yellow)
is not connected
R (red)
L (white)
Connection example for TV models with Mini-YPbPr and Mini-AV inputs
R (red)
L (white)
YPbPr
Y (green)
PB (blue)
PR (red)
R (red)
L (white)
Connection example for TV models with Mini-YPbPr and L/R audio inputs
Initial Document.indd Sec1:40Initial Document.indd Sec1:40 26/11/2018 09:46:1926/11/2018 09:46:19
4141
Connecting to an external audio device (Amplifi er, Surround Sound,
Sound Bars etc)
When connecting via the TV’s 3.5mm earphone output, this will disable the TV speakers.
OPTION 3 for digital optical audio output.
Digital
audio
out
(optical)
Digital
Audio
in
(Optical)
Digital
audio
in
(optical)
OPTION 1 for 3.5mm earphone output.
3.5mm
audio
in
3.5mm
earphone
3.5mm
earphone
OPTION 2 for 3.5mm earphone output.
L
(white)
R (red)
AV in
Video (yellow)
is not connected
Y (green)
PB (blue)
PR (red)
R (red)
L (white)
Y (green)
PB (blue)
PR (red)
Connection example for TV models with YPbPr and Mini-AV inputs
Y (green)
PB (blue)
PR (red)
R (red)
L (white)
Y (green)
PB (blue)
PR (red)
R (red)
L (white)
Connection example for TV models with YPbPr and L/R Audio inputs
CONNECTIONS
How to Connect Your Set
Note: When connecting an external audio device to the TV, set the TV volume to a higher than normal
level, you will then be able to use your device remote control to adjust the volume of the connected
device to suit your requirements.
Initial Document.indd Sec1:41Initial Document.indd Sec1:41 26/11/2018 09:46:2026/11/2018 09:46:20
42
How to Connect Your Set
Connecting to a device with RF output (CCTV or other Analogue devices)
TV source should be set to ATV/Analogue TV.
Note: You will need to manually tune your device into an analogue channel.
RF in
RF out RF in
CONNECTIONS
Connecting an Ethernet/Network cable
The Ethernet port is used only for Pay TV services and Freeview HD (Freeview services are only available in
the UK). It is not intended for internet use.
Ethernet
port
Ethernet
port
Connecting to a device with HDMI output
A HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio
with minimal loss of quality.
TV source should be set to the corresponding HDMI port (HDMI 1, HDMI 2 etc)
HDMI HDMI
Initial Document.indd Sec1:42Initial Document.indd Sec1:42 26/11/2018 09:46:2026/11/2018 09:46:20
42

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp LC-60UI9362 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp LC-60UI9362 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info