453031
52
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
50
Troubleshooting
Problem Possible solution
No power.
Turn on (;) the MAIN POWER switch on the rear of the TV (Page 4).
Is the AC cord disconnected?
Check if you pressed <a on the TV.
The TV cannot be operated. External influences such as lightning, static electricity, etc., may cause improper operation. In this
case, operate the TV after first turning off the power, or unplugging the AC cord and re-plugging it in
after one or two minutes.
Remote control unit does not operate.
Are batteries inserted with polarity (e, f) aligned?
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light illuminating to the remote control sensor?
Picture is cut off. Is the image position correct?
Are screen mode adjustments (Wide mode) such as picture size made correctly? (Pages 37, 45 and
46)
Strange colour, light colour, or dark
colour, or colour misalignment.
Adjust the picture tone.
Is the room too bright? The picture may look dark in a room that is too bright.
Check the “Colour system” setting (Pages 32 and 41).
Power is suddenly turned off. The TV’s internal temperature has increased. Remove any objects blocking the vent or clean.
Is the “Sleep timer” set? Select “Off” from the “Sleep timer” menu (Page 29).
Is “No signal off” or “No operation off” activated? (Page 29)
No picture.
Are connections to external equipment correct? (Pages 20_22)
Is the input signal type selected correctly after connection? (Page 40)
Is the correct input source selected? (Page 15)
Is a non-compatible signal being input? (Page 47)
Is the picture adjustment correct? (Pages 26_27)
Is the antenna connected properly? (Page 10)
Is “On” selected in “Audio only”? (Page 29)
No sound. Is the volume too low?
Make sure that headphones are not connected.
Check if you pressed e on the remote control unit.
Is the proper item selected in the “Audio select” menu when connecting devices to the HDMI 2
terminal or the EXT 3 terminal? (Pages 20, 21 and 28)
The TV sometimes makes a cracking
sound.
This is not a malfunction. This happens when the cabinet slightly expands and contracts according to
changes in temperature. This does not affect the TV’s performance.
CLEARING THE PIN
Go to “Menu” > “Setup”.
Press a/b to select “Auto installation”, “Programme setup”, “PIN” or “Reset”, and then press ;.
The PIN input window will display.
Press and hold both :r and i+ on the TV simultaneously until the message appears on the
screen.
Reset
If complex adjustments are made so that the settings cannot be restored to normal, you can reset the settings to the
factory preset values.
Go to “Menu” > “Setup” > “View setting” > “Reset”.
Press c/d to select “Yes”, and then press ;.
“Now, TV will restart automatically, OK?” displays on the screen.
Press c/d to select “Yes”, and then press ;.
“Now initialising...” displays on the screen and blinks.
After the reset has completed, the power shuts off and then comes back on. The screen will have returned to its original settings.
NOTE
PIN input is required when executing “Reset”. The default PIN is “1234”. To change the PIN setting, refer to Password/Lock settings
(Page 33). To clear the PIN setting (PIN input will no longer be needed), refer to CLEARING THE PIN (Page 50).
1
2
3
1
2
3
Appendix
52

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp LC-46LE810E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp LC-46LE810E in de taal/talen: Engels als bijlage per email.

De handleiding is 7,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sharp LC-46LE810E

Sharp LC-46LE810E Gebruiksaanwijzing - Nederlands - 64 pagina's

Sharp LC-46LE810E Gebruiksaanwijzing - Nederlands - 64 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info