662057
1
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
LC-32XL8E
LC-32XL8S
LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISEUR COULEUR À ÉCRAN
CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD
TELEVISOR DE CRISTAL LÍQUIDO
Printed in Spain
Gedruckt in Spanien
Imprimé en Espagne
Stampato in Spagna
Gedrukt in Spanje
Impreso en España
Impresso no Espanha
LC-32XL8E/LC-37XL8E
LC-32XL8S/LC-37XL8S
OPERATION MANUAL / BEDIENUNGSANLEITUNG / MODE D'EMPLOI / MANUALE DI ISTRUZIONI / GEBRUIKSAANWIJZING / MANUAL DE MANEJO /
MANUAL DE OPERAÇÃO
D638WJZZ 1
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO
MANUAL DE OPERAÇÃO
ENGLISHDEUTSCHFRANÇAIS
ITALIANO
NEDERLANDS
ESPAÑOL
TINS-D638WJZZ
08P06-SP-NG
PIN
Printed on environmentally friendly paper
Auf ökologischem Papier gedruckt
Imprimé sur papier écologique
Stampato su carta ecologica
Afgedrukt op ecologisch papier
Impreso en papel ecológico
Impresso sobre papel ecológico
SHARP ELECTRÓNICA ESPAÑA S.A.
Polígono Industrial Can Sant Joan
Calle Sena s/n
08174 SANT CUGAT DEL VALLÉS
BARCELONA (ESPAÑA)
SHARP CORPORATION
LC-37XL8E
LC-37XL8S
PORTUGUÊS
(
776.0
)
/
[
898.0
]
(
776,0
)
/
[
898,0
]
(
701.5
)
/
[
824.4
]
(
701,5
)
/
[
824,4
]
(
130.0
)
(
130,0
)
[
156.7
]
[
156,7
]
(
332.0
)
/
[
369.0
]
(
332,0
)
/
[
369,0
]
(
517.0
)
/
[
581.0
]
(
517,0
)
/
[
581,0
]
(
572.0
)
/
[
638.0
]
(
572,0
)
/
[
638,0
]
480.0
480,0
300.0
300,0
300.0
300,0
276.0
276,0
99.0
99,0
94.6
94,6
(55.0)
(55,0)
(
396.0
)
/
[
464.0
]
(
396,0
)
/
[
464,0
]
[57.0]
[57,0]
15°
15°
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the
fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked
or and of the same rating as above,
which is also indicated on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains
plug and fit an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a
safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric
shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this product may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.
The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug.
Before replacing the plug cover make sure that:
If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.
The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
( ) : LC-32XL8E/32XL8S
[ ] : LC-37XL8E/37XL8S
: LC-32XL8E/32XL8S
LC-37XL8E/37XL8S
:LC-32XL8E/LC-32XL8S
:LC-37XL8E/LC-37XL8S
OPERATION MANUAL
Contents ............................................................................. 1
Introduction ........................................................................ 2
Dear SHARP customer ................................................. 2
Important Safety Precautions ........................................ 2
Trademarks ................................................................... 2
Remote control unit....................................................... 3
TV (Front view) .............................................................. 4
TV (Rear view) ............................................................... 4
Preparation ........................................................................ 5
Supplied accessories .................................................... 5
Attaching the stand unit ................................................ 5
Inserting the batteries .................................................... 6
Using the remote control unit ........................................ 6
Cautions regarding the remote control unit ............... 6
Quick guide ........................................................................ 7
Initial installation overview .............................................. 7
Before turning on the power.......................................... 8
Bundling the cables ................................................. 8
Initial auto installation .................................................... 9
Checking signal strength and channel strength ........ 9
Watching TV ..................................................................... 10
Daily operation ............................................................ 10
Switching on/off ..................................................... 10
Switching between analogue and digital
broadcasts .......................................................... 10
Changing channels ................................................ 10
Selecting an external video source ......................... 10
Selecting a sound mode ........................................ 10
EPG (Electronic Programme Guide) ............................. 11
EPG Overview ............................................................. 11
Useful settings for using EPG ...................................... 11
Selecting a programme using EPG.............................. 12
Timer recording using EPG ......................................... 13
Cancelling the timer recording ..................................... 13
Teletext ....................................................................... 14
Using the MHEG-5 application (UK only) ..................... 14
Connecting external devices .......................................... 15
Introduction to connections ......................................... 15
HDMI connection ................................................... 16
Component connection ......................................... 16
S-VIDEO/VIDEO connection .................................. 16
SCART connection ................................................ 17
Controlling devices with SCART using AV Link ....... 17
Speaker/amplifier connection ................................. 18
Inserting a CA Card ..................................................... 19
AQUOS LINK .................................................................... 20
Controlling HDMI devices using AQUOS LINK ............. 20
AQUOS LINK connection ............................................ 21
AQUOS LINK Setup .................................................... 21
Operating an AQUOS LINK device .............................. 22
Menu operation................................................................ 23
What is the MENU? .................................................... 23
Common operations .............................................. 23
Basic adjustment ............................................................. 24
Picture Settings ........................................................... 24
AV MODE .............................................................. 25
Audio Settings ............................................................ 25
Power Save Settings ................................................... 25
Channel Settings ......................................................... 26
Auto Installation ..................................................... 26
Digital channel settings .......................................... 26
Analogue channel settings ..................................... 27
Password/Parental lock settings ............................ 28
Language Settings (language, subtitle, multi audio) ..... 28
Useful Viewing functions ................................................ 29
Selecting the picture size ............................................ 29
Selecting the WSS (Wide Screen Signalling)
picture size automatically ..................................... 29
Selecting the WSS (Wide Screen Signalling)
picture size manually ........................................... 29
Selecting the picture size manually ......................... 29
Selecting the recording picture size manually ......... 30
Selecting the HDMI picture size automatically ........ 30
Other picture and audio settings ................................. 30
Adjusting image position ........................................ 30
Reducing noise on the screen ................................ 30
Automatic volume adjustment ................................ 30
Emphasising dialogue ............................................ 30
Outputting audio only ............................................. 30
Display Settings .......................................................... 31
Channel display ..................................................... 31
Time and Title display ............................................ 31
Other useful features ...................................................... 32
Setting when using external devices ........................... 32
Input source settings ............................................. 32
Skipping specified inputs ....................................... 32
Colour system settings .......................................... 32
Additional features ...................................................... 32
Connecting a PC .............................................................. 33
Connecting a PC ........................................................ 33
Displaying a PC image on the screen .......................... 33
Selecting the picture size ....................................... 33
Adjusting the PC image automatically .................... 34
Adjusting the PC image manually ........................... 34
Selecting input resolution ............................................ 34
RS-232C port specifications ....................................... 35
PC compatibility chart ................................................. 36
RS-232C command list............................................... 36
Appendix .......................................................................... 37
Troubleshooting .......................................................... 37
Updating your TV via DVB-T ....................................... 38
Reset .......................................................................... 38
Identification................................................................ 38
Specifications ............................................................. 39
Optional accessory ..................................................... 39
End of life disposal ...................................................... 40
ENGLISH
The illustrations and the OSD (On-Screen Display) in this operation manual are for explanation purposes and may vary slightly
from the actual operations.
The examples used throughout this manual are based on the LC-37XL8E model.
Contents
1
ENGLISH
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product.
Do not use liquid cleaners or aerosol cleaners.
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub,
swimming pool and in a wet basement.
Do not place vases or any other water-filled containers on this product. The water may spill onto the
product causing fire or electric shock.
Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the
product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When
mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting
hardware recommended by the manufacturer.
When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops,
excessive force and uneven floor surface can cause the product to fall from the cart.
Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or
block these vents and openings since insufficient ventilation can cause overheating and/or shorten the
life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they
can block ventilation openings. This product is not designed for built-in installation; do not place the
product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the
manufacturer’s instructions are followed.
The LCD panel used in this product is made of glass. Therefore, it can break when the product is
dropped or impact applied. If the LCD panel is broken, be careful not to be injured by broken glass.
Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating
products (including amplifiers).
To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
Do not display a still picture for a long time, as this could cause an afterimage to remain.
There is power consumption always if main plug is connected.
Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high
voltage and other dangerous conditions. Request a qualified person to perform servicing.
The LCD panel is a very high technology product, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of
blue, green or red. This is within product specifications and does not constitute a fault.
Precautions when transporting the TV
When transporting the TV, never carry it by holding onto the speakers. Be sure to always carry the TV by two people holding
it with two hands—one hand on each side of the TV.
Introduction
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-
free operation of your product, please read the Important Safety Precautions carefully before using this product.
Important Safety Precautions
Trademarks
“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
TruSurround XT, SRS and h symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
The “HD ready 1080P” Logo is a trademark of EICTA.
The DVB logo is the registered trademark of the Digital Video Broadcasting—DVB—project.
“x.v.Colour” and
are trademarks of Sony Corporation.
2
Introduction
15
16
17
18
19
20
21
22
23
24
25
4
3
2
5
6
7
8
9
10
11
13
12
14
1
B (Standby/On)
(Page 10)
Buttons for useful operations
m (Teletext)
ATV: Display analogue teletext (Page
14).
DTV: Select MHEG-5 and teletext for
DTV (Page 14).
k (Reveal hidden Teletext)
(Page 14)
[ (Subtitle)
Switch subtitle languages on/off
(Pages 14 and 28).
3 (Freeze/Hold)
Press to freeze a moving image on
the screen.
Teletext: Stop updating teletext
pages automatically or release the
hold mode.
1 (Subpage)
(Page 14)
v (Top/Bottom/Full)
Set the area of magnification in
teletext mode (Page 14).
0–9 numeric buttons
Set the channel.
Enter desired numbers.
Set the page in teletext mode.
When the five Nordic countries
(Sweden, Norway, Finland,
Denmark, or Iceland) are selected
in the country setting from “Auto
Installation” (page 26), DTV
services are four digits. When
another country is selected, DTV
services are three digits.
A (Flashback)
Press to return to the previously
selected channel or external input.
DTV
Press to access digital TV mode.
ATV
Press to access conventional
analogue TV mode.
2 (Sound mode)
Select a sound multiplex mode
(Page 10).
ik/l (Volume)
Increase/decrease TV volume.
e (Mute)
TV sound on/off.
f (WIDE MODE)
Select a wide mode (Pages 29 and
33).
AV MODE
Select a video setting (Page 25).
END
Exit the “MENU” screen.
1
2
3
4
5
6
7
8
9
0
Q
W
DEMO
Demonstrate the 100 Hz effects in a
dual screen format (Page 24).
b (INPUT SOURCE)
Select an input source (Page 10).
EPG
DTV: Display the EPG screen (Pages
11–13).
RADIO
DTV: Switch between Radio and
Data mode.
When only data broadcasting (no
radio broadcasting) is transmitted
by DVB, the radio broadcasting
will be skipped.
P. INFO
Press to display programme
information which is transmitted
through digital video broadcasting in
the upper left corner of the screen
(DTV only).
Pr/s
Select the TV channel.
p (Display information)
Press to display the station
information (channel number, signal,
etc.) in the upper right corner of the
screen (Page 31).
SLEEP
Press to schedule a time for the TV
to automatically standby (Page 26).
MENU
“MENU” screen on/off.
a/b/c/d (Cursor)
Select a desired item on the setting
screen.
OK
Execute a command within the
“MENU” screen.
ATV/DTV: Display the programme
list when no other “MENU” screen is
running.
6 (Return)
Return to the previous “MENU”
screen.
AQUOS LINK buttons
If external equipment such as a
AQUOS BD Player is connected via
HDMI cables and is AQUOS LINK
compatible, you can use these
AQUOS LINK buttons. See pages 20
and 22 for details.
R
T
Y
U
I
O
P
A
S
D
F
G
Remote control unit
R/G/Y/B (Colour) buttons
The coloured buttons are
correspondingly used to select the
coloured items on the screen (e.g.
EPG, MHEG-5, Teletext).
E
3
Introduction
16
12
13
14
7
8
9
10
11
1
2
3
4
5
6
15
EXT4 (HDMI) terminal
EXT5 (HDMI) terminal
EXT7 (ANALOGUE RGB/AUDIO)
terminals
DIGITAL AUDIO OUTPUT terminal
OUTPUT (AUDIO) terminals
Antenna terminal
1
2
3
4
5
6
TV (Front view)
TV (Rear view)
EXT6 (HDMI/AUDIO) terminals
RS-232C terminal
EXT8 (COMPONENT/AUDIO)
terminals
EXT2 (RGB) terminal
EXT1 (RGB) terminal
7
8
9
10
11
EXT3 terminals
Headphones
SERVICE socket
COMMON INTERFACE slot
AC INPUT terminal
12
13
14
15
16
WARNING:
Excessive sound pressure from
earphones and headphones can cause
hearing loss.
4
Remote control sensor
OPC sensor
OPC indicator
SLEEP indicator
B (Standby/On) indicator
MENU button
a (Power) button
ik/l
Volume buttons
Pr/s
Programme (channel) buttons
b (INPUT SOURCE) button
Confirm that there are ten screws with the stand
unit.
Attach the supporting post for the stand unit
onto the base using the six screws with the
screw driver (supplied) as shown.
1
2
Preparation
Inserting the stand.
Insert the stand into the openings on the
bottom of the TV (Hold the stand so it will
not drop from the edge of the base area).
Insert and tighten the four short screws into
the four holes on the rear of the TV.
3
1
2
1
2
NOTE
To detach the stand unit, perform the steps in reverse
order.
Supplied accessories
Attaching the stand unit
Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent
it from being damaged.
CAUTION
Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
5
Remote control unit
(g1)
AC cord (g1) Stand unit (g1)
Cable clamp (g1)
Pages 3 and 6 Page 5
Page 8Page 8
Operation manual (This publication)
“AAA” size alkaline battery (g2) ... Page 6
Product shape varies in some countries.
Supporting
post
Soft
cushion
Preparation
Inserting the batteries
Before using the TV for the first time, insert two supplied “AAA” size alkaline batteries. When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
Open the battery cover.
Insert two supplied “AAA” size alkaline batteries.
Place batteries with their terminals corresponding to the
(e) and (f) indications in the battery compartment.
Close the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Do not mix batteries of different types. Different types of batteries have different characteristics.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
chemical leakage in old batteries.
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you
find any chemical leakage, wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
When replacing the batteries, use alkaline batteries instead of zinc-carbon ones.
Note on disposing batteries:
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial
businesses.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control
unit and sensor may prevent proper operation.
1
2
3
Cautions regarding the remote control unit
Do not expose the remote control unit to shock. In addition, do not expose the
remote control unit to liquids, and do not place in an area with high humidity.
Do not install or place the remote control unit under direct sunlight. The heat
may cause deformation of the unit.
The remote control unit may not work properly if the remote control sensor of
the TV is under direct sunlight or strong lighting. In such cases, change the
angle of the lighting or the TV, or operate the remote control unit closer to the
remote control sensor.
30° 30°
6
5 m
Remote control sensor
Quick guide
1 2 3
Initial installation overview
Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary
depending on your TV installation and connection.
Connect an antenna cable to
the antenna terminal (Page 8).
If necessary, insert a CA card
into the CI slot to watch
scrambled broadcasts (Pages
8 and 19).
Connect the AC cord to the TV
(Page 8).
Product shape varies in some countries.
n
o
p
Turn on the power using a on
the TV (Page 10).
Run the initial auto installation
(Page 9).
Language setting
English
Italiano
Svenska
Country setting
Austria A B/G
Finland
FIN
B/G
Greece GR B/G
Channel search setting
Analogue SearchDigital Search
n
o
Congratulations!
Now you can watch TV.
If necessary, adjust the
antenna to attain maximum
signal reception (Page 9).
n
o
7
Preparation
Power on and
run the auto
installation
Watch TV
Connect
external devices
Connect external
devices such as a
DVD player/recorder
as instructed (Pages
15–17).
Connect external
audio devices such as
speakers/amplifier as
instructed (Pages 15
and 18).
n
o
Start searching
channels
Quick guide
Supplying power to the antenna
You must supply power to the antenna in order
to receive digitally/terrestrially broadcast stations
after connecting the antenna cable to the antenna
terminal on the rear of the TV.
Press MENU and the “MENU” screen displays.
Press c/d to select “Setup”.
Press a/b to select “Antenna Setup-DIGITAL”, and
then press OK.
Press a/b to select “Supply Voltage”, and then press
OK.
Press c/d to select “On”, and then press OK.
1
2
3
4
5
Mounting the TV on a wall
This TV should be mounted on the wall only with the wall mount bracket and attachment available
from SHARP (Page 39). The use of other wall mount brackets may result in an unstable installation
and may cause serious injuries.
Mounting the LCD colour TV requires special skills and should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility
for improper mounting or mounting that results in accident or injury.
You can ask a qualified service personnel about using an optional bracket and attachment to mount the TV to the wall.
To use this TV mounted on a wall, first remove the adhesive tape at the two locations on the rear of the TV, and
then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
When you mount the TV on a wall, you should attach the supporting post.
When mounting the TV on a wall, the centre of the TV screen is 17.3 mm below the mark “A” engraved on the
metal plate angle used for affixing to a wall (applicable model: LC-32XL8E, LC-32XL8S).
When mounting the TV on a wall, the centre of the TV screen is 44.1 mm below the mark “A” engraved on the
metal plate angle used for affixing to a wall (applicable model: LC-37XL8E, LC-37XL8S).
Before turning on the power
Bundling the cables
Product shape varies in some countries.
8
Carefully insert the CI
Module in the CI slot
with the contact side
forward.
The logo on the CI
Module must be
facing forward from
the rear of the TV.
1
2
Cable clamp
Bundle the cables with
the clamp.
AC cord
Place the TV close to the
AC outlet, and keep the
power plug within reach.
Standard
DIN45325 plug
(IEC 169-2) 75 q
coaxial cable
Quick guide
Initial auto installation
When the TV is powered on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
Press a on the TV.
The initial auto installation wizard appears.
Setting the OSD language.
English
Italiano
Svenska
Press a/b/c/d to select the desired language,
and then press OK.
Setting the country (Location of the TV).
Austria A B/G
Finland
FIN
B/G
Greece GR B/G
Press a/b/c/d to select your country or area,
and then press OK.
This setting screen only appears during the first
installation.
Starting channel search.
Analogue SearchDigital Search
Press c/d to select “Digital Search” or “Analogue
Search”, and then press OK.
If you want to search for more broadcasts, execute
“Additional Search” from the “Programme Setup”
menu (Pages 26 and 27).
To watch both analogue broadcasts and digital
broadcasts, you should perform the channel search
setting for each format.
EXAMPLE
If you execute “Digital Search” in the initial auto
installation wizard, you should perform “Analogue
Search” from “Auto Installation” under the “Setup”
menu.
1
2
3
4
The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
To abort the initial auto installation in progress, press
END.
NOTE
If you turn off the power on the TV after performing step 4,
the initial auto installation wizard does not appear. The auto
installation function allows you to execute the installation
again from the “Setup” menu (Page 26).
The initial auto installation wizard will go off if you leave
the TV unattended for 30 minutes before searching for
channels in step 5.
Checking signal strength and
channel strength
If you install a DVB-T antenna for the first time or
relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking
the antenna setup screen.
Press MENU and the “MENU” screen displays.
Press c/d to select “Setup”.
Press a/b to select “Antenna Setup-DIGITAL”,
and then press OK.
Checking signal strength
Press a/b to select “Signal Strength”.
Signal Strength
Supply Voltage
Channel Strength
Signal Strength
Quality
Current Max 0
CH No. 21
0
Current Max 0 0
Checking channel strength
Press a/b to select “Channel Strength”, and
then press OK.
You can input a specified frequency band using the
09 numeric buttons.
Signal Strength
Supply Voltage
Channel Strength
Signal Strength
Quality
Current Max0
CH No. 21
0
Current Max00
474. 0
MHz
Position and align the antenna so that the
maximum possible values for “Signal Strength”
and “Quality” are obtained.
NOTE
The values of “Signal Strength” and “Quality” indicate when
to check the appropriate alignment of the antenna.
5
1
2
3
E
E
4
9
Confirm the following before turning
on the power
Is the antenna cable connected?
Is the AC cord plugged in?
E
E
Watching TV
Selecting a sound mode
DTV mode:
If multi sound modes are received, each time you
press 2 the mode switches as follows.
Audio (ENG) : STEREO
L/R LRLR
Audio (ENG) : CH A
CH A CH B CH AB
Audio (ENG) : MONO
Press c/d to select L or R sound when the STEREO
or DUAL MONO screen is displayed.
Audio (ENG) : STEREO
L/R L RLR
NOTE
The sound mode screen disappears in six seconds.
Selectable items vary depending on the received broadcasts.
ATV mode:
Each time you press 2, the mode switches as
shown in the following tables.
NICAM TV broadcasts selection
Signal Selectable items
Stereo
NICAM STEREO, MONO
Bilingual
NICAM CH A, NICAM CH B, NICAM CH AB, MONO
Monaural
NICAM MONO, MONO
A2 TV broadcasts selection
Signal Selectable items
Stereo
STEREO, MONO
Bilingual
CH A, CH B, CH AB
Monaural
MONO
NOTE
When no signal is input, the sound mode will display “MONO”.
E
E
Watching analogue
broadcasts
EWatching digital
broadcasts
E
Daily operation
Switching on/off
Turning on/off the power
Press a on the TV.
Switch it off by pressing a on the TV.
Standby mode
To standby mode
If the TV is switched on, you can switch it to standby
by pressing B on the remote control unit.
Switching on from standby
From standby, press B on the remote control unit.
TV indicator status
B indicator
Status
Off
Power off
Green
Power on
Red
Standby
NOTE
If you are not going to use this TV for a long period of time, be sure
to remove the AC cord from the AC outlet.
A small amount of electric power is still consumed even when a is
turned off.
E
E
Switching between analogue and
digital broadcasts
Changing channels
With 0–9:
With Pr/s:
Selecting an external video source
Once the connection is made, press
b to display the “INPUT SOURCE”
screen, and then press a/b to
switch over to the appropriate
external source with OK.
10
NOTE
When turning off the power using
a on the TV, EPG data (Electronic
programme guide) will be lost, and
programmed timer recordings will not
be performed by the TV.
INPUT SOURCE
TV
EXT1
EXT2
EXT3
EXT4
EXT5
Watching TV
Useful functionsE
Common Operation
Press MENU and the “MENU” screen displays.
Press c/d to select “Digital Setup”.
Press a/b to select “EPG Setup”, and then
press OK.
Digital Setup
REC Picture Size
Download Setup
EPG Setup
Subtitle
CI Menu
[Yes]
[16:9 TV]
Press a/b to select the desired item, and then
press OK (Example: “EPG Setup”, “Display
Range Setup”, etc.).
Yes No
EPG Setup
Display Range Setup
Genre Icon Setup
Press a/b/c/d to select or adjust the desired
item, and then press OK (Example: “Yes”, “No”,
etc.).
1
2
3
4
5
EPG (Electronic Programme Guide)
EPG (Electronic Programme Guide) is a programme list that is displayed on the screen. With the EPG, you can
check the schedule of DTV/RADIO/DATA, view detailed information about them, tune to an event currently on-air
and set a timer for future events.
EPG Overview
Basic functionsE
Useful settings for using EPG
EPG display settings
EPG Setup (setting for receiving EPG
data)
If you want to use the EPG for digital stations, select
“Yes”. The EPG data must be automatically captured
while the TV is in standby mode. After setting to “Yes”,
it may take some time to turn off the power using the
remote control unit due to the process of the data
capture.
NOTE
If the TV main power is switched off, the EPG data will not
be captured.
Display Range Setup
The “Display Range Setup” allows you to select three
types of time spans for display on the screen.
E
E
Genre Icon Setup
You can grey out or place a mark on desired genres
and smoothly search for programmes you frequently
watch.
Genre Icon List
Icon Genre Icon Genre
Movie/Drama Music/Ballet/Dance
News/Current affairs
Arts/Culture (without
music)
Show/Game show
Social/Political
Issues/Economics
Sports
Education/Science/
Factual Topics
Children’s/Youth
programmes
Leisure hobbies
E
E
Select a programme using EPG (Page 12)
Check programme information (Page 12)
E
E
Search for a programme by category (Page 12)
Search for a programme by date and time
(Page 12)
Timer recording using EPG (Page 13)
E
E
E
Mode1: Displays six hours of programme information.
Mode2: Displays three hours of programme information.
Mode3: Changes to the EPG display format with a
vertical time span.
11
Item
Check programme information
Press a/b/c/d to select the programme you
want to check.
Press R.
040
10 : 00AM - 1 : 00 AM
BBC News 24 BBC News
Programme Info.
Back to EPG
The BBC’s rolling news service with headlines every 15 minutes.
10 AM 11 0 PM 1 2 3
BBC TWO 002
BBC THREE 007
BBC FOUR 010
BBC FIVE 012
CBBC Channel 030
BBC 1 061
BB22 062
BBC NEWS 24 340
BBCi 351
This is BBC THREE
BBC NEWS BBC NEWS
BBC NEWS BBC NEWS
BBCi BBCi
This is BBC THREE
R
Next
B
Press OK to tune to the selected programme.
Search a programme in a category
Press G.
Press a/b to select the desired genre, and then
press OK.
Press a/b to select a programme you want to
watch, and then press OK.
10 : 50 AM - 11 : 05 AMMon 19/05CBBC Cahnnel 030 time
10 : 50 AM - 11 : 10 AMMon 19/05BBC TWO 002 School is Lock
11 : 05 AM - 11 : 20 AMMon 19/05CBBC Cahnnel 030 Words and Pictures
Movie/Drama
News/Current affairs
Show/Game show
Sports
Children’s/Youth programmes
Music/Ballet/Dance
Arts/Culture (without music)
Social/Political Issues/Economics
Education/Science/Factual Topics
Leisure hobbies
[Today] AM [Today] PM [Tue] 20 AM [Tue] 20 PM
Refer to page 11 for the genre setting.
3
1
2
3
4
1
2
3
Search for a programme by date/time
Press Y.
Press c/d to select the desired time span, and
then press OK.
Search by Time
10 AM 11 0 PM 1 2 3
BBC TWO 002
BBC THREE 007
BBC FOUR 010
BBC FIVE 012
CBBC Channel 030
BBC 1 061
BB22 062
BBC NEWS 24 340
This is BBC THREE
BBC NEWS BBC NEWS
BBC NEWS BBC NEWS
This is BBC THREE
Back to EPG
R
Next
Next
B
SIT 1 994
: Select Time
Enter
G
+1 Week
Y
OK
: Enter
0 AM -
6 AM
6 AM -
0 PM
0 PM -
6 PM
6 PM -
0 AM
Today
Press a/b to select the desired programme,
and then press OK.
NOTE
When you select a programme outside of the current time
span, the timer setting screen is displayed (Page 13).
5
1
2
3
Select a programme
Select the time span
Press c/d to select the time span you want to search.
Continue to press d to display programmes in the next time span.
Select the desired programme
Press a/b to select the desired programme.
If a or b are displayed on the left of the services, continue to press a/b to display next or previous screen.
E
1
2
Watching TV
Selecting a programme using EPG
Basic Operation
The illustrations on this page are explained using three digit services.
Display/Close the EPG screen
Press EPG.
E
Selecting a programme
12
EPG [Mon]16/04 10:57 AM[DTV-TV] Today (Tue)20 (Wed)21 (Thu)22 (Fri)23 (Sat)24 (Sun)25 (Mon)26
040
10 : 00AM - 1 : 00 AM
BBC News 24 BBC News
10 AM 11 0 PM 1 2 3
BBC TWO 002
BBC THREE 007
BBC FOUR 010
BBC FIVE 012
CBBC Channel 030
BBC 1 061
BB22 062
BBC NEWS 24 340
BBCi 351
SIT 3 996
BBC ONE 999
SIT 1 994
SIT 2 995
SIT 5 998
SIT 4 997
This is BBC THREE
BBC NEWS BBC NEWS
BBC NEWS BBC NEWS
This is BBC THREE
BBCi BBCi
This is BBC THREE
OK
: Select : Enter
6
: Back
EPG
: Exit Programme info. Search By Genre Search By Date Timer List
RG YB
2
1
345
Programme Information
Search by Time
Back to EPG
R
Next
Next
B
: Select Time
Enter
G
+1 Week
Y
OK
: Enter
0 AM -
6 AM
6 AM -
0 PM
0 PM -
6 PM
6 PM -
0 AM
Today
Programme Info.
Back to EPG
The BBC’s rolling news service with headlines every 15 minutes.
R
Next
B
Movie/Drama
News/Current affairs
Show/Game show
Sports
Children’s/Youth programmes
Music/Ballet/Dance
Arts/Culture (without music)
Social/Political Issues/Economics
Education/Science/Factual Topics
Leisure hobbies
Genre
Date/Time
Watching TV
Timer recording using EPG
You can record TV programmes using data from the
EPG.
Press EPG.
Press a/b/c/d to select the programme you
want to record, and then press OK.
Press c/d to select the preferred timer setting,
and then press OK.
Watch Record No
If you select “No”, the TV returns to the EPG screen.
Watching a programme at a set time
Press c/d to select “Watch”, and then press
OK.
Press c/d to select “Yes”, and then press OK.
The selected TV programme is marked with an icon.
Recording a programme at a set time
Press c/d to select “Record”, and then press
OK.
Press c/d to select the preferred timer
recording type, and then press OK.
1
2
3
E
1
2
E
1
2
Press c/d to select “Yes”, and then press OK.
The selected TV programme is marked with an icon.
NOTE
Refer to pages 15–17 and 21 for connecting external
devices.
3
Cancelling the timer recording
Press EPG.
Press a/b/c/d to select the programme on
timer setup, and then press OK.
Press c/d to select “Cancel”, and then press
OK.
Press c/d to select “Yes”, and then press OK.
Cancelling using the B button on the
remote control unit
Press EPG.
Press B to display the timer recording screen.
Press a/b to select a programme with a set
timer recording you want to change, and then
press OK.
Press c/d to select “Cancel”, and then press
OK.
Press c/d to select “Yes”, and then press OK.
1
2
3
4
E
1
2
3
4
5
AQUOS LINK: Records a programme at a set time when
a device compatible with AQUOS LINK is connected.
AV LINK: Records a programme at a set time when a
device compatible with AV LINK is connected.
VHS tape: Records a programme at a set time when a
device compatible with VHS tape is connected.
13
Item
Buttons for teletext operations
Buttons Description
Pr/s
Increase or decrease the page number.
Colour (R/G/
Y/B)
Select a group or block of pages
displayed in the coloured brackets at the
bottom of the screen by pressing the
corresponding Colour (R/G/Y/B) on the
remote control unit.
0–9
Directly select any page from 100 to 899
by using the 09 numeric buttons.
v (Top/
Bottom/Full)
Switch the teletext image to Top, Bottom
or Full.
k (Reveal
hidden
Teletext)
Reveal or hide hidden information such
as an answer to a quiz.
3 (Freeze/
Hold)
Stop updating teletext pages
automatically or release the hold mode.
[ (Subtitle
for Teletext)
Display the subtitle or exit the subtitle
screen.
Subtitles will not be displayed when
the service does not contain subtitle
information.
1 (Subpage)
Reveal or hide subpages.
R button: Move to the previous
subpage.
G button: Move to the following
subpage.
These two buttons are shown on the
screen by the symbols “e and “f”.
Using the MHEG-5 application (UK
only)
Some services bring you programmes with the MHEG
(Multimedia and Hypermedia Expert Group) application
encoded, letting you experience DTV interactively.
When provided, the MHEG-5 application will start
when you press m.
Sample MHEG-5 screen
Watching TV
Teletext
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped TV. Your TV
receives teletext signals broadcast by a TV network,
and decodes them into graphical format for viewing.
News, weather and sports information, stock
exchange prices and programme previews are among
the many services available.
Turning Teletext on/off
Select a TV channel or external source providing
a teletext programme.
Press m to display the Teletext.
Many stations use the TOP operating system, while
some use FLOF (e.g. CNN). Your TV supports both
these systems. The pages are divided into topic
groups and topics. After switching on the teletext, up
to 2,000 pages are stored for fast access.
Each time you press m, the screen switches as
shown below.
Press m again to display the teletext on the right
screen and the normal image on the left screen.
If you select a programme with no teletext signal, “No
Teletext available” displays.
The same message displays during other modes if no
teletext signal is available.
1
2
NOTE
Teletext will not work if the selected signal type is
RGB (Page 32).
14
TELETEXT
TELETEXT
Connecting external devices
Before connecting ...
Be sure to turn off the TV and any devices before making any connections.
Firmly connect a cable to a terminal or terminals.
Carefully read the operation manual of each external device for possible connection types. This also helps you
get the best possible audiovisual quality to maximise the potential of the TV and the connected device.
Refer to page 33 for connecting a PC to the TV.
Introduction to connections
The TV is equipped with the terminals as shown below. Find the cable corresponding the TV’s terminal and
connect the device.
NOTE
The cables illustrated in pages 15–18 are commercially available items.
E
When using an S-video cable, you also need to connect an audio cable (R/L).*
15
HDMI device (Page 16)
Game console or
camcorder (Page 16)
Audio device (Page 18)
HDMI-certified cable
DVI/HDMI Cable
ø 3.5 mm stereo minijack cable
S-video cable*
AV cable*
Audio cable
Optical audio cable
SCART cable
or
Component cable
Audio cable
Video recording device
(Pages 16 and 17)
or
or
Connecting external devices
HDMI connection
The HDMI connections (High Definition Multimedia
Interface) permit digital video and audio transmission
via a connection cable from a player/recorder. The
digital picture and sound data are transmitted without
data compression and therefore lose none of their
quality. Analogue/digital conversion is no longer
necessary in the connected devices, which also would
result in quality losses.
DVI/HDMI conversion
Using an DVI/HDMI adapter cable, the digital video
signals of a DVD can also be played via the compatible
HDMI connection. The sound must be fed in additionally.
When connecting an HDMI-DVI conversion adapter/cable to the
HDMI terminal, the image may not come in clearly.
Both HDMI and DVI use the same HDCP copy
protection method.
NOTE
If a connected HDMI device is AQUOS LINK compatible, you
can take advantage of versatile functions (Pages 20–22).
Video noise may occur depending on the type of HDMI cable used.
Make sure to use a certified HDMI cable.
When playing the HDMI image, the best possible format for the
picture will be detected and set automatically.
Supported video signal:
576i, 576p, 480i, 480p, 1080i, 720p, 1080p
See page 36 for PC signal compatibility.
Component connection
You will enjoy accurate colour reproduction and
high quality images through the EXT8 terminal when
connecting a DVD player/recorder or other device.
Y PB
(
CB)
L R PR
(
CR)
COMPONENT AUDIO
S-VIDEO/VIDEO connection
You can use the EXT3 terminal when connecting to a
game console, camcorder, a DVD player/recorder or
other device.
NOTE
When using an S-video cable, you also need to connect an
audio cable (R/L).
EXT3: The S-VIDEO terminal has priority over the VIDEO terminal.
16
DVI/HDMI
cable
ø 3.5 mm stereo
minijack cable
HDMI-certified
cable
Audio cable
Component
cable
or
or
AV cable
S-video cable
Example of connectable devices
DVD player/recorder E Blu-ray player/recorderE
After connecting
HDMI Audio Select
After connecting, you must set the audio signal
compatible with the cable you use for the HDMI
device.
Go to “MENU” > “Option” > “HDMI Audio
Select”.
Select “Digital” for audio signals via the
HDMI terminal. Select “Analogue” for audio
signals via the AUDIO jack (EXT6).
E
1
2
Example of connectable devices
VCR E DVD player/recorder
Blu-ray player/recorder
E
E
Example of connectable devices
VCR E DVD player/recorder
Blu-ray player/recorder
Game console E Camcorder
E
E
E
YPB
(
CB)
PR
(
CR)
Connecting external devices
NOTE
In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input terminal to which
the decoder is connected in “Manual Adjust” in the “Analogue Setting” menu (Page 27).
TV-VCR advanced AV Link systems may not be compatible with some external sources.
You cannot connect the VCR with Decoder using a fully wired SCART cable when selecting “Y/C” under “EXT2” in the “Input
Select” menu.
Controlling devices with SCART using AV Link
This TV incorporates four typical AV Link functions for smooth connections between the TV and other audiovisual
equipment.
One Touch Play
While the TV is in standby mode, it automatically turns on and plays back the image from the audiovisual source
(e.g. VCR, DVD player/recorder).
TV Standby
When the TV enters standby mode, the connected audiovisual equipment (e.g. VCR, DVD player/recorder) enters
standby mode as well.
WYSIWYR (What You See Is What You Record)
When the remote control unit of the connected VCR has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.
Preset Download
Automatically transfers the channel preset information from the tuner on the TV to the one on the connected
audiovisual equipment (e.g. VCR) via the EXT2 terminal.
NOTE
Refer to the operation manuals of external equipment for details.
The AV Link function works only when audiovisual equipment is connected to the EXT2 terminal with a fully wired SCART cable.
The use of the AV Link function is only possible if the TV has enforced a complete auto installation with the connected
audiovisual equipment (Page 9, Initial auto installation).
The availability of the AV Link function depends on the audiovisual equipment used. Depending on the manufacturer and type
of equipment used, it is possible that the described functions may be completely or partially unusable.
SCART connection
Example of connectable devices
DecoderE
When using the EXT2 (SCART) terminal
If your VCR supports TV-VCR advanced AV Link
systems, you can connect the VCR using a fully wired
SCART cable.
E
Example of connectable devices
VCR E DVD player/recorderE
17
SCART cable
Decoder
SCART cable
SCART cable
DecoderVCR
Connecting external devices
DIGITAL AUDIO IN
AUX1 IN
LR
AUX OUT
LR
Connecting an amplifier with analogue
audio input
EConnecting an amplifier with digital audio
input
E
Speaker/amplifier connection
Connect an amplifier with external speakers as shown below.
After connecting
Digital audio output setting
After connecting an amplifier with digital audio
input and external speakers as shown, you should
set an audio output format compatible with
the programme you are watching or the device
connected.
Go to “MENU” > “Option” > “Digital Audio
Output” > select “PCM” or “Dolby Digital”.
E
18
Optical audio cable
Audio cable
Amplifier with
analogue audio input
Amplifier with
digital audio input
Connecting external devices
Inserting a CA Card
In order to receive coded digital stations, a Common
Interface Module (CI Module) and a CA Card must be
inserted in the CI slot of the TV (Page 8).
The CI Module and the CA Card are not supplied
accessories. They are usually available from your
dealers.
Inserting the CA Card into the CI Module
With the side with the gold coloured contact
chip facing the side of the CI Module marked
with the provider’s logo, push the CA Card
into the CI Module as far as it will go. Note the
direction of the arrow printed on the CA Card.
Inserting the CI Module in the CI slot
Carefully insert the CI
Module in the CI slot
with the contact side
forward. The logo on
the CI Module must be
facing forward from the
rear of the TV. Do not use
excessive force. Make
sure the module is not
bent in the process.
1
2
Checking CI Module information
NOTE
Make sure that the CI Module is properly inserted.
This menu is only available for digital stations.
Press MENU and the “MENU” screen displays.
Press c/d to select “Digital Setup”.
The content of this menu depends on the provider of
the CI Module.
Press a/b to select “CI Menu”, and then press
OK.
1
2
3
19
Module
General information on CI Module displays.
Menu
Adjustment parameters of each CA Card displays.
Enquiry
You can input numerical values such as passwords
here.
NOTE
The content of each screen depends on the provider of
the CI Module.
E
E
E
AQUOS LINK
Controlling HDMI devices using AQUOS LINK
What is AQUOS LINK?
Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you
can interactively operate compatible system devices (AV amplifier, DVD player/recorder,
Blu-ray player/recorder) using a single remote control unit.
NOTE
AQUOS LINK-compatible AQUOS AUDIO speaker system and AQUOS Recorder are scheduled
to be on sale after the release of this TV (as of June 2008).
What you can do with AQUOS LINK
One Touch Recording (DTV only)
You do not have to search for the remote control unit of your recording device. Press the
REC E or REC STOP H buttons inside the flip cover to start/stop recording what you
see on the recorder.
One Touch Play
When the TV is in standby mode, it will automatically turn on and play back the image
from the HDMI source.
Single remote control operation
The AQUOS LINK automatically recognises the connected HDMI device and you can
control the TV and the devices as if using a universal remote control unit.
Operating Title list of external devices
In addition to displaying the TV’s own Timer list (Page 12), you can also call up the
external player’s Top menu or AQUOS BD Player’s/AQUOS Recorder’s Title list provided
that the devices support AQUOS LINK.
Multiple control of HDMI devices
You can select which HDMI device to operate using the OPTION button.
NOTE
When you use AQUOS LINK, make sure to use a certified HDMI cable.
Point the remote control unit toward the TV, not to the connected HDMI device.
Video noise may occur depending on the type of HDMI cable used. Make sure to use a certified
HDMI cable.
Up to three HDMI recording devices, one AV amplifier and two players can be connected using
this system.
These operations affect the HDMI device selected as the current external source. If the device
does not operate, turn on the device and select the appropriate external source using b.
When you insert/remove HDMI cables or change connections, turn on all connected HDMI
devices before turning on the TV. Confirm that picture and audio are correctly output by selecting
“EXT4”, “EXT5” or “EXT6” from the “INPUT SOURCE” menu.
20
AQUOS LINK
AQUOS LINK connection
First connect the AQUOS AUDIO speaker system or an AQUOS BD Player/AQUOS Recorder that supports the
HDMI CEC protocol.
NOTE
Refer to the operation manual of the device to be connected for further details.
After unplugging connection cables or changing the connection pattern, turn on the power of the TV after all relevant devices’
power have been turned on. Change the external input source by pressing b, select the appropriate external source and
verify the audiovisual output.
The cables illustrated in the following explanation are commercially available items.
AQUOS LINK Auto Power On
If this is activated, the One Touch Play function
is enabled. While the TV is in standby mode, it
automatically turns on and plays back the image from
the HDMI source.
Press MENU and the “MENU” screen displays.
Press c/d to select “Option”.
Press a/b to select “AQUOS LINK Setup”, and
then press OK.
Press a/b to select “Auto Power On”, and then
press OK.
Press c/d to select “On”, and then press OK.
NOTE
The factory default for this item is “Off”.
Selecting recorder
Here, you can select a recorder for the recording from
several connected recorders.
1
2
3
4
5
AQUOS LINK Setup
Repeat steps 1 to 3 in AQUOS LINK Auto
Power On.
Press a/b to select “Selecting Recorder”, and
then press OK.
Select the recorder, and then press OK.
NOTE
If you have connected the AQUOS AUDIO speaker system
between the TV and an AQUOS Recorder, the external
source’s indication changes (e.g. from “EXT5” to “EXT5
(Sub)”).
Using Genre Info.
This function allows you to automatically switch to
the appropriate sound mode depending on the genre
information included the digital broadcast.
Repeat steps 1 to 3 in AQUOS LINK Auto
Power On.
Press a/b to select “Using Genre Info.”, and
then press OK.
Press c/d to select “On”, and then press OK.
1
2
3
1
2
3
Connecting an AQUOS BD
Player/AQUOS Recorder only
Connecting an AQUOS BD Player/AQUOS Recorder via
the AQUOS AUDIO speaker system
21
HDMI-certified cable
AQUOS AUDIO
speaker system
HDMI-certified cable
AQUOS BD Player/
AQUOS Recorder
Optical audio
cable
AQUOS BD Player/
AQUOS Recorder
HDMI-certified
cable
AQUOS LINK
Open the remote control unit’s flip cover, and
then press OPTION.
Press a/b to select “Setup Menu”, and then
press OK.
NOTE
If a connected device does not have this function or the
device is in a status where the menu cannot be displayed
(recording, entering standby, etc.), this function may not be
available.
Playback of titles using AQUOS LINK
This section explains how to play back a title in the
AQUOS BD Player/AQUOS Recorder.
Open the remote control unit’s flip cover, and
then press OPTION.
Press a/b to select “Top Menu/Title List”, and
then press OK.
The linked recorder now powers on and the TV
automatically selects the appropriate external input
source.
The title list data from the connected AQUOS BD
Player/AQUOS Recorder displays.
Select the title with a/b/c/d, and then press
PLAY I.
Selecting media type for CEC-compatible
recorder
If your recorder has multiple storage media, select the
media type here.
Open the remote control unit’s flip cover, and
then press OPTION.
Press a/b to select “Media change”, and then
press OK.
Select the desired medium, such as DVD
recorder or HDD. The media type changes every
time you press OK.
HDMI device selection
If multiple HDMI devices are connected in a daisy
chain, you can specify which device to control here.
Open the remote control unit’s flip cover, and
then press OPTION.
Press a/b to select “Model select”, and then
press OK. The HDMI device changes every time
you press OK.
Recording via the AQUOS Recorder EPG
(only for recorders)
You can call up the CEC-compatible recorder’s EPG
and preset timer recordings using the TV’s remote
control unit.
Open the remote control unit’s flip cover, and
then press OPTION.
Press a/b to select “Recorder EPG”, and then
press OK.
The external input source switches and the recorder’s
EPG is displayed.
Select the programme to record.
Refer to the operation manual of the recorder for details.
1
2
1
2
3
1
2
3
1
2
1
2
3
Operating an AQUOS LINK device
AQUOS LINK allows you to operate the HDMI-
connected device with a single remote control unit.
Open the remote control unit’s flip cover.
Press PLAY I to start playback of a title.
See the right column, section “Playback of titles
using AQUOS LINK” if you want to start playback
using the list of the titles of the AQUOS BD Player/
AQUOS Recorder.
Press FWD J to fast forward.
Press REV G to reverse.
Press STOP H to stop.
Press B to turn the HDMI-connected device on/off.
Listening with the AQUOS AUDIO speaker system
You can choose to listen to the TV sound only from the
AQUOS AUDIO speaker system.
Open the remote control unit’s flip cover, and
then press OPTION.
AQUOS LINK Menu
Recorder EPG
Top Menu/Title List
Media change
By AQUOS AUDIO SP
By AQUOS SP
Sound mode change
Setup Menu
Model select
Press a/b to select “By AQUOS AUDIO SP”,
and then press OK.
The sound from the TV speaker and headphone
terminal is silenced and only the sound from the
AQUOS AUDIO speaker system is audible.
Listening with the AQUOS TV speaker system
You can choose to listen to the TV sound only from the
AQUOS TV speaker system.
Open the remote control unit’s flip cover, and
then press OPTION.
Press a/b to select “By AQUOS SP”, and then
press OK.
Manually changing the AQUOS AUDIO
speaker system’s sound mode
Open the remote control unit’s flip cover, and
then press OPTION.
Press a/b to select “Sound mode change”.
The sound mode changes every time you press OK.
Refer to the operation manual of the AQUOS AUDIO
speaker system for details.
Calling up the menu of an external device
connected with the TV via HDMI
You can call up the menu of an HDMI CEC-compatible
external device (player, recorder, decoder, etc.) using
the “Setup Menu” function.
1
2
3
1
2
1
2
1
2
3
22
Menu operation
1
Picture
Contrast
OPC [Off]
Brightness
Colour
Tint
Sharpness
Advanced
Reset
[+30]
[0]
[0]
[0]
[0]
0
–30
–30
–30
–10
+40
+30
+30
+30
+10
Backlight [+14] –16
+16
DYNAMIC
Power Control
No Signal Off
No Operation Off
Ecology
Sleep Timer
[Disable]
[Disable]
Analogue SearchDigital Search
3
2
NOTE
“MENU” options differ in the selected input modes, but the operating procedures are the same.
The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens.
Items with 4 cannot be selected for various reasons.
What is the MENU?
You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “MENU”.
The “MENU” enables various settings and adjustments.
The “MENU” can be operated with the remote control unit.
Common operations
Operation without a remote control unit
This function is useful when there is no remote control
unit within your reach.
Press MENU and the “MENU”
screen displays.
Press Pr/s instead of a/b
or ik/l instead of c/d to
select the item.
Press b to complete the setting.
NOTE
The “MENU” screen will disappear if left unattended for several
seconds.
1
2
3
About the Guide Display
The Guide Display at the bottom of the screen shows
operations with the OSD.
OK
: Select : Enter
MENU
: End
6
: Back
The bar above is an operational guide for the remote
control unit. The bar will change in accordance with
each menu setting screen.
23
Display the MENU
Screen
Exit the MENU
screen
Select an item
Press MENU and the “MENU”
screen displays.
The operation will exit the “MENU”
screen if you press END before it is
completed.
Press a/b/c/d to select/adjust the
desired menu, and adjust the item to
the desired level, and then press OK.
Press 6 to return to the previous
“MENU” page.
Selecting in the MENUE
Selecting optionsE
Basic adjustment
NOTE
When set to “On”, the TV senses the surrounding light and
automatically adjusts the backlight brightness. Make sure no object
obstructs the OPC sensor, which could affect its ability to sense
surrounding light.
This TV provides various advanced functions for
optimising the picture quality.
Colour Temp.
100Hz
Film Mode
Active Contrast
3D-Y/C
Monochrome
Range of OPC
High
Mid-High
Middle
Mid-Low
Low
Colour Temp.
Adjusts the colour temperature to give the best white image.
NOTE
“3D-Y/C” may not operate depending on the input signal type or
when the input signal is noisy.
“3D-Y/C” has even more effect on composite video signals (CVBS).
Picture Settings
Picture
Contrast
OPC [Off]
Brightness
Colour
Tint
Sharpness
Advanced
Reset
[+30]
[0]
[0]
[0]
[0]
0
–30
–30
–30
–10
+40
+30
+30
+30
+10
Backlight [+14] –16
+16
DYNAMIC
100Hz
“100Hz” technology provides superior solutions for
digital display picture quality removing motion blur.
NOTE
Press DEMO on the remote control unit to show “100Hz”
demonstration in a dual screen format.
This effect is greater on fast moving images.
“100 Hz” will have no effect in the following cases;
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
If images appear blurred, set the “Film Mode” to “Off”.
Film Mode
Automatically detects a film-based source (originally
encoded at 24 or 25 frames per second, depending on
the vertical frequency), analyses it and then recreates
each still film frame for high-definition picture quality.
Active Contrast
Automatically adjusts the contrast of an image
according to the scene.
3D-Y/C
Provides high quality images with minimal dot crawl and
cross colour noise by detecting changes in the image.
Off: The brightness is fixed at the value set in “Backlight”.
On: Automatically adjusts.
On:Display: Displays the OPC effect on the screen while
adjusting the brightness of the screen.
OPC
Picture
Automatically adjusts the brightness of the screen.
Adjusts the picture to your preference with the
following picture settings.
Adjustment items
Selectable
items
c button d button
Backlight
The screen dims The screen brightens
Contrast
For less contrast For more contrast
Brightness
For less brightness For more brightness
Colour
For less colour
intensity
For more colour
intensity
Tint
Skin tones become
purplish
Skin tones become
greenish
Sharpness
For less sharpness For more sharpness
Advanced
Picture
High: White with bluish tone.
Mid-High:
Intermediate tone between “High” and “Middle”.
Middle: Natural tone.
Mid-Low:
Intermediate tone between “Middle” and “Low”.
Low: White with reddish tone.
Standard: Normal adjustment.
Fast: Sets the optimum image quality for fast-moving images.
Slow: Sets the optimum image quality for slow-moving images.
Off: No detecting.
Picture adjustments
Picture
24
Item
Item
Item
Basic adjustment
NOTE
The item marked with * is available only when selecting
“EXT4”, “EXT5”, “EXT6” or “EXT7” from the “INPUT
SOURCE” menu.
The item marked with ** is available only when accepting
an “x.v.Colour” signal through an HDMI terminal.
Monochrome
For viewing a colour video in black & white.
Range of OPC
The brightness level range of the OPC sensor’s
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of e16 and a minimum of
f16.
Selectable
items
Description
Max.
f16 through e16
Min.
f16 through e16
NOTE
This function is available only when the “OPC” setting is set
to “On” or “On:Display”.
The maximum setting cannot be set to a smaller number
than the minimum setting.
The minimum setting cannot be set to a bigger number
than the maximum setting.
The maximum and minimum settings cannot be set to the
same number.
Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
AV MODE
“AV MODE” gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image input
from external equipment.
Press AV MODE.
Each time you press AV MODE, the mode
changes.
You can also switch the mode on the “Picture” and
“Audio” menu screen by pressing AV MODE.
1
2
Audio Settings
Audio
Balance
Treble
Surround
Reset
[ 0]
[ 0]
–15
L
+15
R
[Off]
Bass
[ 0] –15
+15
DYNAMIC
STANDARD: For a highly defined image in a normally
bright room.
MOVIE: For viewing a movie in a darkened room.
GAME: For playing of video games.
PC*: For PC.
x.v.Colour**: Produce realistic colour on the TV screen
unlike any other signal.
USER: Allows you to customise settings as desired. You
can set the mode for each input source.
DYNAMIC (Fixed): For a clear-cut image emphasising
high contrast for sports viewing (The “Picture” and
“Audio” settings cannot be adjusted).
DYNAMIC: For a clear-cut image emphasising high
contrast for sports viewing.
Audio adjustment
Audio
Surround
Audio
No Signal Off
Power Control
When set to “Enable”, the TV will automatically enter
standby mode if there is no signal input for 15 minutes.
Five minutes before the TV enters standby mode, the
remaining time displays every minute.
NOTE
Even if a TV programme finishes, this function may not
operate because of interference from other TV stations or
other signals.
This function allows you to enjoy realistic live sound.
Power Save Settings
Power Control
No Signal Off
No Operation Off
Ecology
Sleep Timer
[Disable]
[Disable]
You can adjust the sound quality to your preference
with the following settings.
Selectable
items
c button d button
Treble
For weaker treble For stronger treble
Bass
For weaker bass For stronger bass
Balance
Decrease audio from
the right speaker
Decrease audio from
the left speaker
25
Item
The TV will automatically enter standby mode if no
operations are performed during the time span you set
(“30min.” or “3hr.”).
Five minutes before the TV enters standby mode, the
remaining time displays every minute.
When set to “Yes”, the TV activates the following
power saving mode.
“OPC” set to “On” (Page 24).
“Standby Mode” set to “Mode2” (Page 32).
“No Signal Off” set to “Enable” (Page 25).
“No Operation Off” set to “3hr.” (Page 26).
Allows you to set a time when the TV automatically
enters standby mode.
NOTE
Select “Off” to cancel the sleep timer.
When the time has been set, countdown automatically
starts.
Five minutes before the preset of time expires, the
remaining time displays each minute.
Channel Settings
Auto Installation
No Operation Off
Power Control
Ecology
Power Control
Sleep Timer
Power Control
Basic adjustment
Auto Installation
Setup
The TV automatically detects and stores all available
services in your area. This function also allows you to
perform the channel setting for digital and analogue
individually and reconfigure the settings after the initial
auto installation has been completed.
After selecting “Yes” on the screen, you can set
language and channel search the same as in the
initial auto installation. Follow steps 2, 4 and 5
on page 9.
NOTE
You cannot set the country setting in “Auto Installation” in
the “Setup” menu. If you want to reconfigure the country
setting, automatically execute initial auto installation after
executing “Reset” from the “Setup” menu.
The current country setting is displayed on the screen.
Programme Setup
Setup
Digital Setting
You can reconfigure the DTV service settings
automatically or manually.
Additional Search
Use this menu to add new services automatically after
auto installation has been completed.
Manual Search
Add new services within a specified frequency band.
Enter the frequency using 09 numeric buttons.
You can perform “Manual Search” with a service number
only when the five Nordic countries have been selected in
the country setting.
Manual Adjust
Configure various settings for each service using the
Colour (R, G, Y, B) buttons.
DTV 993
Service
No.
Old
LCN
EPG
Skip
CH
Skip
Lock
Service
Name
SIT 3
DTV 994 ✔ ✔ SIT 2
DTV 995 SIT 1
DTV 999 HD Monosco
: Lock
R
: CH Skip
G
: EPG Skip
Y
: Sort
B
Press a/b to select the desired service.
Press the colour button on the remote control unit
corresponding with the item you want to reconfigure.
The mark indicates the operation is set to on. Each
time the colour button is pressed, you can switch the
corresponding operation on/off.
E
E
E
1
2
Digital channel settings
26
Buttons for Manual Adjust operation
Lock: Press R button.
When the service is locked, you must enter your PIN
whenever you tune to the service.
CH Skip: Press G button.
Services with a mark are passed over when pressing
Pr/s on the TV or remote control unit.
EPG Skip: Press Y button.
Services with a mark are passed over in the Electronic
Programme Guide (EPG).
Sort: Press B button.
The item position of services can be sorted.
Press a/b to select the service whose item
position you want to move, and then press OK.
DTV 994 ✔ ✔ SIT 2
DTV 995 SIT 1
Press a/b to move it to the desired position,
and then press OK.
DTV 994
✔✔
SIT 1
DTV 995
SIT 2
Repeat steps 1 and 2 until all desired service
items are sorted.
1
2
3
Basic adjustment
Channels with “Skip” set to “On” are passed over
when using Pr/s even if selected while watching
the image from the TV.
When connecting a decoder to the TV, you need to
select “EXT1” or “EXT2”.
NOTE
The factory preset value is “Off”.
You can block the viewing of any channel.
NOTE
See “Child Lock” for setting a PIN.
When “Lock” is set to “On” for a channel, “Child lock has
been activated” displays, and the image and sound of the
channel are blocked.
When pressing 6 while “Child lock has been activated”
displays, the PIN input window will display. Inputting the
correct PIN unlocks the “Child Lock” temporarily until the
power is turned off.
Sort
Channel positions can be sorted freely.
Press c/d to select “Yes”, and then press OK.
Press a/b/c/d to select the channel you want
to move, and then press OK.
Press a/b/c/d to move it to the desired
position, and then press OK.
Repeat steps 2 and 3 until all desired channels
are sorted.
Erase Programme
Channels can be erased individually.
Press c/d to select “Yes”, and then press OK.
Press a/b/c/d to select the channel you want
to erase, and then press OK.
A message window pops up.
Press c/d to select “Yes”, and then press
OK to erase the selected channel. All the
subsequent channels move up.
Repeat steps 2 and 3 until all desired channels
are erased.
E
1
2
3
4
E
1
2
3
4
Programme Setup
Setup
Analogue Setting
You can reconfigure the analogue TV channels settings
automatically or manually.
Additional Search
Use this menu to add new channels automatically after
auto installation has been made.
Start searching channels after selecting the colour system
and sound system.
Manual Adjust
Use this menu to set up analogue TV channels
manually.
After selecting “Yes” on the screen, press a/b/
c/d to select the channel you want to set and
then press OK.
E
E
You can adjust the frequency to the desired position.
NOTE
Adjust while checking the background picture as a
reference.
Instead of pressing c/d to adjust the frequency, you
can set by directly entering the frequency number of the
channel with 09 numeric buttons.
EXAMPLE
179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
49.25 MHz: Press 4 s 9 s 2 s 5 s OK.
Select the optimum colour system to receive (“Auto”,
“PAL”, “SECAM”).
Select the optimum sound systems (Broadcasting
systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).
When a TV channel sends its Network Name, the
“Auto Installation” detects the information and assigns
a name to it. However, you can change channel names
individually.
Press a/b/c/d to select each character of the
new name for the channel, and then press OK.
Repeat step 1 above until the name is fully spelt
out.
NOTE
The name can be five characters or less.
If a channel name is less than five characters, select “END”
to set the channel name.
1
2
Analogue channel settings
27
Fine
Colour sys.
Sound sys. (Broadcasting systems)
Label
Skip
Decoder
Lock
Basic adjustment
Child Lock
Setup
Allows you to use a PIN to protect certain settings
from being accidentally changed.
Change PIN
Register a four-digit password number to use the
“Child Lock” function.
Enter the four-digit number as a PIN using 09
numeric buttons.
Enter the same four-digit number as in step 1 to confirm.
“The system PIN has been changed successfully” displays.
NOTE
To view a locked channel, you must enter the PIN (See pages 26
and 27 for locking channels from viewing in DTV and ATV mode).
When you select a locked channel, a PIN prompt message pops
up. Press 6 to display the PIN input window.
Cancel PIN
Allows you to reset your PIN.
NOTE
As a precautionary measure, make a note of your PIN on the
back of this operation manual, cut it out and keep it in a safe
place that children cannot reach.
Parental rating
This function allows DTV services to be restricted.
It prevents children from watching violent or sexual
scenes that may be harmful.
NOTE
“Universal viewing” and “Parental approval pref.” are ratings used
exclusively in France.
Refer to page 40 for details about ratings.
1
2
Language
Setup
You can select a OSD language from the “Setup”
menu. Select from among 22 languages (Czech,
Danish, Dutch, English, Estonian, Finnish, French,
German, Greek, Hungarian, Italian, Latvian, Lithuanian,
Norwegian, Polish, Portuguese, Russian, Slovak,
Slovene, Spanish, Swedish, Turkish).
Subtitle
Digital Setup
Set up to two preferred subtitle languages (including
subtitles for the hearing impaired) to display if subtitles
are available.
NOTE
Subtitles will not be displayed when the service does not contain
subtitle information.
Digital Audio Language
Option
Set up to three preferred multi audio languages to
display if the audio languages are available.
Switching the multi audio languages
Each time you press 2 on the remote control unit,
the audio language switches.
E
Key Lock
Option
This function allows you to lock the buttons on the TV
or remote control unit in order to prohibit children from
changing the channel or volume.
NOTE
You cannot set both “RC Control Lock” and “Button Control Lock”
at the same time.
Cancelling the lock
Press the MENU button on the TV and set to “Off” to
cancel the “RC Control Lock”. Press the MENU button
on the remote control unit and set to “Off” to cancel
the “Button Control Lock”.
Refer to page 23 for menu operation using MENU button on the TV.
E
1st Language E 2nd Language
For hearing impaired
E
E
Switching subtitle languages
Each time you press [ on the remote control unit, the
subtitle switches.
E
Password/Parental lock settings
Off: Unlocks the buttons.
RC Control Lock: Locks all buttons on the remote control unit.
Button Control Lock: Locks the buttons on the TV except the
power switch.
Language Settings (language,
subtitle, multi audio)
1st LanguageOff
2nd Language
••••••
1st Language1st Language
(For hearing impaired)
Set “For hearing impaired” to “Yes”
Subtitles for the hearing impaired have priority over
each of the subtitle language settings (Example: “1st
Language”, “2nd Language”, etc.).
EXAMPLE
E
28
Item
Selectable items
Useful Viewing functions
WSS
Setup
WSS signal 4:3 screen
4:3 Mode
Setup
The “WSS” signal has 4:3 auto-switching that allows
you to select between “Normal” and “Panorama”.
4:3 mode “Panorama”4:3 mode “Normal”
The “WSS” allows the TV to switch automatically
among the different picture size.
NOTE
Use “WIDE MODE” if an image does not switch to the
appropriate picture size. When the broadcast signal
contains no “WSS” information, the function will not work
even if enabled.
Selecting the WSS (Wide Screen
Signalling) picture size manually
Selecting the picture size
Selecting the WSS (Wide Screen
Signalling) picture size automatically
Normal: Normal range keeping 4:3 or 16:9 aspect ratio.
Panorama: Wide image without side bars.
Selecting the picture size manually
You can select the picture size. Selectable picture size
varies with the type of signal received.
Normal: Keeps the original aspect ratio in a full screen
display.
Zoom 14:9: For 14:9 letterbox pictures. A thin side bar
appears on each side, and you may also see bars on
the top and bottom with some programmes.
Panorama: In this mode, the picture is stretched toward
each side of the screen.
Full: For 16:9 squeeze pictures.
Cinema 16:9: For 16:9 letterbox pictures. Bars may
appear on the top and bottom with some programmes.
Cinema 14:9: For 14:9 letterbox pictures. Bars may
appear on the top and bottom with some programmes.
Full: Displays with an Overscan image. Crops all sides of
screen.
Underscan: Displays with an Underscan image only
when receiving a 720p signal. Displays with the High-
Definition image adjusted optimally. Noise may appear
on the edge of the screen with some programmes.
Dot by Dot: Displays an image with the same number
of pixels on the screen when receiving 1080i/1080p
signals only.
NOTE
Some items do not appear depending on the type of
received signal.
Press f.
The “WIDE MODE” menu displays.
The menu lists the “WIDE MODE” options selectable
for the type of video signal currently received.
Press f or a/b while the “WIDE MODE”
menu displays on the screen.
As you toggle the options, each is immediately
reflected on the screen. There is no need to press OK.
Basically, if you set “WSS” to “On” in the “Setup”
menu, the optimum “WIDE MODE” is automatically
chosen for every broadcast, VCR or DVD player/
recorder.
NOTE
Even if you select your desired “WIDE MODE” manually,
the TV may automatically switch to the optimum “WIDE
MODE” depending on the signal received when “WSS” is
set to “On”.
1
2
29
Item
Item (for SD [Standard-Definition] signals)
Item (for HD [High-Definition] signals)
You can use this menu to set the appropriate picture
size for viewing a 16:9 format TV programme on a 4:3
TV.
REC Picture Size
Digital Setup
Setting to “4:3 TV” Setting to “16:9 TV”
This function allows you to automatically change to the
appropriate picture size when viewing an HDMI signal
using the EXT4, 5 and 6 terminals.
Other picture and audio settings
Adjusting image position
HDMI Auto View
Setup
NOTE
This function must be set before recording.
Selecting the HDMI picture size
automatically
Position
Setup
For adjusting a picture’s horizontal and vertical
position.
NOTE
Adjustments are stored separately for each input source.
Depending on the input signal type or “WIDE MODE”
setting, a position setting may not be available.
DNR
Option
“DNR” (Digital Noise Reduction) produces a clearer
image (“Off”, “High”, “Low”).
Automatic volume adjustment
Auto Volume
Option
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. The Automatic Volume Control
(Auto Volume) reduces this problem by equalizing
levels.
Emphasising dialogue
Clear Voice
Option
This function emphasises speech against background
noise for greater clarity. It is not recommended for
music sources.
Outputting audio only
Audio Only
Option
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
Useful Viewing functions
Selecting the recording picture
size manually
H-Pos.: Centres the image by moving it to the left or
right.
V-Pos.: Centres the image by moving it up or down.
Reducing noise on the screen
Off: Both screen images and audio are output.
On: Audio is output without a screen image.
30
Item
Item
Useful Viewing functions
Time Display
Option
Time Format
You can select the time format (either “24HR” or “AM/
PM”) for the clock time.
Game Play Time
Option
This function allows you to display the elapsed time on
the screen when “AV MODE” is set to “GAME”.
Programme Title Display
Option
This function allows you to display programme
information such as the title and airtime by tuning a
channel.
NOTE
This function is available only when the DTV mode is
selected.
Time Display
This function allows you to display the clock time in the
lower-right corner of the screen.
Four digit numbers (e.g. 0001) are displayed after
selecting the five Nordic countries in the country
setting.
Time display in channel information
You can display the time information included in DTV
and teletext broadcasts.
NOTE
Skip step 1 if receiving DTV broadcasts.
Select a TV channel (The time information is
automatically captured).
Press p. The channel display will appear on
the TV.
Press p again within the several seconds
that the channel display is on the screen. Time
information will be shown in the lower-right
corner of the screen for several seconds.
Even when you change the TV channel, you can
display the time information with steps 2 and 3
above.
NOTE
If acquired successfully, the time information will appear in
the upper-right corner of the screen by pressing MENU.
*
E
1
2
3
4
Subtitle ENG 1/3:
New Information
Audio (ENG) STEREO :
Video 1080i :
DTV
001
BBC2
Subtitle Teletext Off:
New Information
PAL I
NICAM STEREO
ATV
01
BBC1
DTV Mode ATV Mode
Display Settings
Channel display
You can display the channel information by pressing
p on the remote control unit.
Time and Title display
On: Displays the clock time.
On (half-hourly): Displays the clock time in 30-minute
increments.
Off: Hides the clock time.
On: Under connecting a game console to the TV, the
elapsed time is displayed in 30-minute increments after
you start playing a game.
Off: Hides the time.
31
Item
Item
Other useful features
Input Select
Option
For setting the signal type of external equipment.
NOTE
If no (colour) image displays, try changing to another
signal type.
Check the operation manual of the external equipment for
the signal type.
When the signal type is set to “Auto”, the input terminal
where a cable is connected is automatically selected.
Input Label
Setup
You can label each input source with a custom
description.
Press b to select the desired input source.
Go to “MENU” > “Setup” > “Input Label”.
Press a/b/c/d to select each character of the
new name for the input source, and then press
OK.
A
BACK
CLEAR
END
K
U
B
L
V
C
M
W
D
DVD
N
X
E
O
Y
F
P
Z
G
Q
+
H
R
–_
I
S
.
J
T
0123456789
Repeat until the label is fully spelt out.
NOTE
The label can be six characters or less.
When you want to set an input source label of less than six
characters, select “END” to set the name.
INPUT SOURCE
TV
EXT1
EXT2
EXT3
DVD
EXT5
EXT6
NOTE
You cannot change labels if the input source is “TV”.
1
2
3
4
Input Skip
Setup
This setting allows you to skip the SCART, HDMI or
RGB input on the Input Source Selection operation.
EXT1 (SCART)
EXT2 (SCART)
EXT4 (HDMI)
EXT5 (HDMI)
EXT6 (HDMI)
EXT7 (RGB)
Y es
No
Colour system settings
You can change the colour system to one that is
compatible with the image on the screen.
NOTE
The factory preset value is “Auto”.
If “Auto” is selected, the colour system for each channel
is automatically set. If an image does not display clearly,
select another colour system (e.g. “PAL”, “SECAM”).
Additional features
Standby Mode
Setup
You can reduce the TV’s start-up time after turning on
the power with the remote control unit.
Colour System
Option
Setting when using external
devices
Input source settings
EXT1: Y/C, CVBS, RGB
EXT2: Y/C, CVBS, RGB
EXT3: Auto, S-VIDEO, VIDEO
Skipping specified inputs
Mode1: The TV quickly starts up from standby. 30 W or
more of power consumption is required during standby.
Mode2: Power consumption is small during standby.
32
Item
Item
Connecting a PC
NOTE
The PC input terminals are DDC1/2B-compatible.
Refer to page 36 for a list of PC signals compatible with
the TV.
A Macintosh adaptor may be required for use for some
Macintosh computers.
When connecting to a PC, the input signal type is
automatically detected except 1,024 g 768 and 1,360 g
768 signals.
Analogue Connection
NOTE
Refer to page 29 for AV signals (480i/480p/576i/576p/
720p/1080i/1080p). The ANALOGUE RGB terminal (PC)
(EXT7) is not compatible with 480i/576i/1080p signals.
Connecting a PC
HDMI Connection
Displaying a PC image on the
screen
Selecting the picture size
You can select the picture size.
Press f.
The “WIDE MODE” menu displays.
Press f or a/b to select a desired item on the
menu.
NOTE
Connect the PC before making adjustments.
Selectable picture size may vary with input signal type.
EXAMPLE
1
2
Full: An image fully fills the screen.
Cinema: For letterbox pictures. Bars may appear on the
top and bottom with some programmes.
Normal: Keeps the original aspect ratio in a full screen
display.
Dot by Dot: Displays an image with the same number of
pixels on the screen.
33
ø 3.5 mm stereo minijack cable
EXT4 or 5
HDMI-certified cable
PC
EXT6
DVI/HDMI cable
RGB cable
ø 3.5 mm stereo minijack cable
ø 3.5 mm stereo minijack cable
DVI/RGB conversion cable
Normal Full
Item
PC
EXT7
PC
EXT7
PC
Connecting a PC
Press a/b to select the specific adjustment
item.
Press c/d to adjust the item to the desired
position.
1
2
Reset
H-Pos. [ 90] ab
ab
ab
ab
V-Pos.
Clock
Phase
[ 39]
[ 90]
[ 20]
NOTE
You can only select the “Input Signal” on the “Setup” menu
when receiving one of the two input signals listed above.
1024 x 768
1360 x 768
(Example)
Fine Sync.
Setup
NOTE
For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press OK.
“Clock” and “Phase” in the “Fine Sync.” menu can be
adjusted only when inputting analogue signals through the
EXT7 terminal.
Selecting input resolution
Some input signals may have to be registered
manually to display properly.
The pairs of input signals (resolutions) in the list
below are not distinguishable when received. In such
cases, you have to set the correct signal manually.
After setting once, it will display when the same
signal (resolution) is input again.
Input Signal
Setup
30%
NOTE
When “Auto Sync.” is successful, “Auto Sync completed
successfully” displays. If not, “Auto Sync.” failed.
“Auto Sync.” may fail even if “Auto Sync completed
successfully” displays.
“Auto Sync.” may fail if the PC image has low resolution,
has unclear (black) edges, or is moved while executing
“Auto Sync.”.
Be sure to connect the PC to the TV and switch it on
before starting “Auto Sync.”.
“Auto Sync.” can be executed only when inputting
analogue signals through the EXT7 terminal.
Adjusting the PC image manually
Ordinarily you can easily adjust the picture as
necessary to change image position using “Auto
Sync.”. In some cases, however, manual adjustment is
needed to optimise the image.
Auto Sync.
Setup
Adjusting the PC image
automatically
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available DVI/RGB conversion
cable, etc.
H-Pos.: Centres the image by moving it to the left or
right.
V-Pos.: Centres the image by moving it up or down.
Clock: Adjusts when the image flickers with vertical
stripes.
Phase: Adjusts when characters have low contrast or
when the image flickers.
34
Item
Connecting a PC
C1 C2 C3 C4 P1 P2 P3 P4
Communication conditions
Set the RS-232C communications settings on the PC
to match the TV’s communications conditions. The
TV’s communications settings are as follows:
Baud rate:
9,600 bps
Data length:
8 bits
Parity bit:
None
Stop bit:
1 bit
Flow control:
None
Communication procedure
Send the control commands from the PC via the RS-
232C connector.
The TV operates according to the received command
and sends a response message to the PC.
Do not send multiple commands at the same time.
Wait until the PC receives the OK response before
sending the next command.
Make sure to send “A” with the carriage return and
confirm that “ERR” returns before operating.
Command format
0055
100
–30
0009
0
????
?
OK
ERR
Response code format
RS-232C port specifications
PC Control of the TV
When a programme is set, the TV can be controlled
from the PC using the RS-232C terminal. The input
signal (PC/video) can be selected, the volume
can be adjusted and various other adjustments
and settings can be made, enabling automatic
programmed playing.
Use an RS-232C serial control cable (cross type)
(commercially available) for the connections.
NOTE
This operation system should be used by a person who is
accustomed to using PCs.
Parameter
Input the parameter values, aligning left, and fill with
blank(s) for the remainder (Be sure that four values are
input for the parameter).
When the input parameter is not within an adjustable
range, “ERR” returns (Refer to “Response code
format”).
When “?” is input for some commands, the present
setting value responds.
After sending the return code (0DH), make sure to
send the line feed (0AH) as well.
Command four digits: Command. The text of four
characters.
Parameter four digits: Parameter 0–9, blank, ?
35
RS-232C serial control cable
(cross type)
Eight ASCII codes eCR
Command
four digits
Parameter
four digits
Return code
Normal response
Problem response (communication error or incorrect
command)
Return code (0DH)
Return code (0DH)
Connecting a PC
NOTE
This TV has only limited PC compatibility, correct operation
can only be guaranteed if the video card conforms exactly
to the VESA 60 Hz standard. Any variations from this
standard will result in picture distortions.
CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS
POWER SETTING P O W R 0 _ _ _ POWER OFF
INPUT SELECTION A I T G D _ _ _ _ INPUT SWITCHING (TOGGLE)
I T V D _ _ _ _ TV (CHANNEL FIXED)
I D T V _ _ _ _ DTV (CHANNEL FIXED)
I A V D * _ _ _ EXT1–8 (1–8)
CHANNEL D C C H * * _ _ TV DIRECT CHANNEL (1–99)
C H U P _ _ _ _ CHANNEL UP
C H D W _ _ _ _ CHANNEL DOWN
D T V D * * * _ THREE DIGIT DTV DIRECT
CHANNEL (1–999) (Non-Nordic
countries)
D T V D * * * * FOUR DIGIT DTV DIRECT
CHANNEL (1–9999) (Nordic
countries only)
D T U P _ _ _ _ DTV CHANNEL UP
D T D W _ _ _ _ DTV CHANNEL DOWN
INPUT SELECTION B I N P 1 0 _ _ _ EXT1 (Y/C)
I N P 1 1 _ _ _ EXT1 (CVBS)
I N P 1 2 _ _ _ EXT1 (RGB)
I N P 2 0 _ _ _ EXT2 (Y/C)
I N P 2 1 _ _ _ EXT2 (CVBS)
I N P 2 2 _ _ _ EXT2 (RGB)
I N P 3 0 _ _ _ EXT3
I N P 3 1 _ _ _ EXT3 (S-VIDEO)
I N P 3 2 _ _ _ EXT3 (VIDEO)
AV MODE SELECTION A V M D 0 _ _ _ TOGGLE
A V M D 1 _ _ _ STANDARD
A V M D 2 _ _ _ MOVIE
A V M D 3 _ _ _ GAME
A V M D 4 _ _ _ USER
A V M D 5 _ _ _ DYNAMIC (Fixed)
A V M D 6 _ _ _ DYNAMIC
AVMD7__ _PC
A V M D 8 _ _ _ x.v.Colour
A V M D ? ? ? ? 1–8
VOLUME V O L M * * _ _ VOLUME (0–60)
CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS
POSITION H P O S * * * _ H-POSITION (AV/PC)
V P O S * * * _ V-POSITION (AV/PC)
C L C K * * * _ CLOCK (0–180)
P H S E * * _ _ PHASE (0–40)
WIDE MODE W I D E 0 _ _ _ TOGGLE (AV)
W I D E 1 _ _ _ NORMAL (AV)
W I D E 2 _ _ _ ZOOM 14:9 (AV)
W I D E 3 _ _ _ PANORAMA (AV)
W I D E 4 _ _ _ FULL (AV)
W I D E 5 _ _ _ CINEMA 16:9 (AV)
W I D E 6 _ _ _ CINEMA 14:9 (AV)
W I D E 7 _ _ _ NORMAL (PC)
W I D E 8 _ _ _ CINEMA (PC)
W I D E 9 _ _ _ FULL (PC)
W I D E 1 0 _ _ DOT by DOT (AV/PC)
W I D E 1 1 _ _ UNDERSCAN (AV)
MUTE M U T E 0 _ _ _ TOGGLE
M U T E 1 _ _ _ MUTE ON
M U T E 2 _ _ _ MUTE OFF
SURROUND A C S U 0 _ _ _ SURROUND TOGGLE
A C S U 1 _ _ _ SURROUND ON
A C S U 2 _ _ _ SURROUND OFF
AUDIO CHANGE A C H A _ _ _ _ TOGGLE
SLEEP TIMER O F T M 0 _ _ _ OFF
O F T M 1 _ _ _ SLEEP TIMER 30 MIN
O F T M 2 _ _ _ SLEEP TIMER 1 HOUR
O F T M 3 _ _ _ SLEEP TIMER 1 HOUR 30 MIN
O F T M 4 _ _ _ SLEEP TIMER 2 HOUR
O F T M 5 _ _ _ SLEEP TIMER 2 HOUR 30 MIN
TEXT T E X T 0 _ _ _ TEXT OFF
T E X T 1 _ _ _ TEXT ON (TOGGLE)
DCPG***_
DIRECT PAGE JUMP (100–899)
PC compatibility chart
Resolution
Horizontal
Frequency
Vertical
Frequency
Analogue (D-
Sub)
Digital (HDMI)
VESA
Standard
VGA
640 g 480
31.5 kHz 60 Hz
✔✔✔
SVGA
800 g 600
37.9 kHz 60 Hz
✔✔✔
XGA
1,024 g 768
48.4 kHz 60 Hz
✔✔✔
WXGA
1,360 g 768
47.7 kHz 60 Hz
✔✔✔
SXGA
1,280 g 1,024
64.0 kHz 60 Hz
✔✔✔
SXGA+
1,400 g 1,050
65.3 kHz 60 Hz
✔✔
VGA, SVGA, XGA, WXGA, SXGA and SXGA+ are
registered trademarks of International Business
Machines Corporation.
RS-232C command list
36
Appendix
Troubleshooting
Problem Possible Solution
No power.
Check if you pressed B on the remote control unit.
If the indicator on the TV lights up red, press B.
Is the AC cord disconnected?
Check if you pressed a on the TV.
The TV cannot be operated. External influences such as lightning, static electricity, etc., may cause improper operation. In this
case, operate the TV after first turning off the power, or unplugging the AC cord and re-plugging
it in after one or two minutes.
Remote control unit does not operate.
Are batteries inserted with polarity (e, f) aligned?
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light illuminating to the remote control sensor?
Picture is cut off. Is the image position correct?
Are screen mode adjustments (WIDE MODE) such as picture size made correctly? (Pages 29
and 33)
Strange colour, light colour, or dark
colour, or colour misalignment.
Adjust the picture tone.
Is the room too bright? The picture may look dark in a room that is too bright.
Check the “Colour System” setting (Pages 27 and 32).
Power is suddenly turned off. The TV’s internal temperature has increased.
Remove any objects blocking the vent or clean.
Is the “Sleep Timer” set? Select “Off” from the “Sleep Timer” menu (Page 26).
Is “No Signal Off” or “Ecology” activated?
No picture. Are connections to external equipment correct? (Pages 15–17)
Is the input signal type selected correctly after connection? (Page 32)
Is the correct input source selected? (Page 10)
Is a non-compatible signal being input? (Page 36)
Is the picture adjustment correct? (Pages 24–25)
Is the antenna connected properly? (Page 8)
Is “On” selected in “Audio Only”? (Page 30)
No sound. Is the volume too low?
Make sure that headphones are not connected.
Check if you pressed e on the remote control unit.
The TV sometimes makes a cracking
sound.
This is not a malfunction. This happens when the cabinet slightly expands and contracts
according to changes in temperature. This does not affect the TV’s performance.
Cautions regarding use in high and low temperature environments
When the TV is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the TV will recover when the temperature returns to normal.
Do not leave the TV in a hot or cold location. Also, do not leave the TV in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: e5 °C to e35 °C.
Information on the software license for this product
Software composition
The software included in this product is comprised of various software components whose individual copyrights are held by
SHARP or by third parties.
Software developed by SHARP and open source software
The copyrights for the software components and various relevant documents included with this product that were developed
or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant
laws. This product also makes use of freely distributed software and software components whose copyrights are held by
third parties. These include software components covered by a GNU General Public License (hereafter GPL), a GNU Lesser
General Public License (hereafter LGPL) or other license agreement.
Obtaining source code
Some of the open source software licensors require the distributor to provide the source code with the executable software
components. GPL and LGPL include similar requirements. For information on obtaining the source code for the open source
software and for obtaining the GPL, LGPL, and other license agreement information, visit the following website:
http://www.sharp-eu.com/gpl/
We are unable to answer any questions about the source code for the open source software. The source code for the
software components whose copyrights are held by SHARP is not distributed.
Acknowledgements
The following open source software components are included in this product:
• linux kernel • modutils • glibc • zlib • libpng
37
Appendix
Download Setup
Digital Setup
Message List
Information
Go to “MENU” > “Setup” > “Reset”.
Press c/d to select “Yes”, and then press OK.
“Now, TV will restart automatically. OK?” displays on
the screen.
Press c/d to select “Yes”, and then press OK.
“Now initialising...” displays on the screen and blinks.
After the reset has completed, the power shuts
off and then comes back on. The screen will have
returned to its original settings.
Now initialising...
1
2
3
Reset
Setup
Identification
Setup
Receiver Report
Information
Display reports regarding failures and changes for
timer settings.
Reset
If complex adjustments are made so that the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
Searching for updates*
All countries except UK and Sweden are set to “No”
for this function.
The TV automatically determines whether a new
software version is available when the TV is in standby
mode.
*
Updating your TV via DVB-T
Ensure that your TV software version is always up to
date. From time to time SHARP will make updated TV
base software and DVB software available.
Yes: Automatically searches for new software updates
available when the TV is in standby mode.
No: Does not search for update information.
Now: Checks if there is new software immediately.
Downloading the software
You can select the method of update.
If the software is updated, the confirmation
message “New download information has been
detected.” appears.
If the TV receives the update service while in standby
mode, a confirmation message displays after turning
on the power.
Follow the screen prompts.
1
2
Yes: Starts downloading immediately. It takes
approximately one hour to update. You cannot carry
out other operations while downloading.
Cancels the download by pressing OK on the remote
control unit when “Discontinue” is displayed on the
screen during the update.
No: Starts downloading automatically several minutes
after entering standby mode.
When new software is detected, you can confirm the
update information and download the software from
“Message List”.
NOTE
When the TV succeeds at downloading new software,
the message is updated in the “Message List” of the
“Information” menu.
The software update will not be carried out if there is no
new software available at the specified download time.
Identification
CLEARING THE PIN
Go to “MENU” > “Setup”.
Press a/b to select “Auto Installation”,
“Programme Setup”, “Child Lock” or “Reset”,
and then press OK. The PIN input window will
display.
Press and hold both Pr and ik on the TV
simultaneously until the message appears on
the screen.
1
2
3
You can check the TV ID on the screen for reporting to
customer service.
NOTE
The TV must remain in standby mode for download. Do not
turn off the power using a on the TV.
Updating the software may take some time.
38
Item
Item
Appendix
No. Part name Part number
1 Wall mount bracket AN-37AG2
2 Attachment AN-37P30
The listed optional accessories are available for this
LCD colour TV. Please purchase them at your nearest
shop.
Additional optional accessories may be available in the
near future. When purchasing, please read the newest
catalogue for compatibility and check the availability.
Specifications
Item
32o LCD COLOUR TV,
Model: LC-32XL8E, LC-32XL8S
37o LCD COLOUR TV,
Model: LC-37XL8E, LC-37XL8S
LCD panel
32o Advanced Super View & BLACK TFT LCD 37o Advanced Super View & BLACK TFT LCD
Resolution
2,073,600 pixels (1,920 g 1,080)
Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV Function TV-Standard Analogue CCIR (B/G, I, D/K, L/L’)
Digital DVB-T (2K/8K OFDM)
Receiving
Channel
VHF/UHF E2–E69 ch, F2–F10 ch, I21–I69 ch, IR A–IR J ch (Digital: E5–E69 ch)
CATV Hyper-band, S1–S41 ch
TV-Tuning System Auto Preset 999 ch: non-Nordic / 9999 ch: Nordic (ATV: 99 ch), Auto Label, Auto Sort
STEREO/BILINGUAL NICAM/A2
Brightness 450 cd/m
2
Backlight life 60,000 hours (when “Backlight” is set to the default position)
Viewing angles H: 176°, V: 176°
Audio amplifier
10 W g 2
Speaker
(40 mm g 100 mm) g 2 / Ø 20 mm g 2
Terminals Antenna
UHF/VHF 75 q Din type (Analogue & Digital)
RS-232C D-Sub 9 pin male connector
EXT1 SCART (AV input, Y/C input, RGB input, TV output)
EXT2 SCART (AV input/monitor output, Y/C input, AV Link, RGB input)
EXT3 S-VIDEO (Y/C input), RCA pin (AV input)
EXT4 HDMI
EXT5 HDMI
EXT6 HDMI, Ø 3.5 mm jack
EXT7 15 pin mini D-sub, Ø 3.5 mm jack
EXT8 COMPONENT IN: Y/P
B
(C
B
)/P
R
(C
R
), RCA pin (AUDIO R/L)
DIGITAL AUDIO OUTPUT Optical SPDIF Digital audio output
C. I. (Common Interface) EN50221, R206001
OUTPUT RCA pin (AUDIO R/L)
Headphones Ø 3.5 mm jack (Audio output)
OSD language Czech, Danish, Dutch, English, Estonian, Finnish, French, German, Greek, Hungarian, Italian,
Latvian, Lithuanian, Norwegian, Polish, Portuguese, Russian, Slovak, Slovene, Spanish,
Swedish, Turkish
Power Requirement AC 220–240 V, 50 Hz
Power Consumption 140 W (0.4 W Standby) (Method IEC60107) 171 W (0.4 W Standby) (Method IEC60107)
Weight 15.5 kg (Without stand), 18.5 kg (With stand) 18.0 kg (Without stand), 21.0 kg (With stand)
Operating temperature
0 °C to e40 °C
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from these values in individual units.
NOTE
Refer to the inside back cover for dimensional drawings.
Optional accessory
39
A. Information on Disposal for Users (private households)
1. In the European Union
Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!
Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires
proper treatment, recovery and recycling of used electrical and electronic equipment.
Following the implementation by member states, private households within the EU states may return their used
electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local
retailer may also take back your old product free of charge if you purchase a similar new one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately
beforehand according to local requirements.
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery
and recycling and thus prevent potential negative effects on the environment and human health which could otherwise
arise due to inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.
For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don’t
purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or www.sens.ch.
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for
the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local
collection facilities.
For Spain: Please contact the established collection system or your local authority for take-back of your used
products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal.
Attention: Your product
is marked with this
symbol. It means that
used electrical and
electronic products
should not be mixed
with general household
waste. There is a
separate collection
system for these
products.
Rating table for Child Lock
AGE
456789101112131415161718
Universal viewing
——————————————
Parental approval pref.
✔✔✔✔✔
——————————
X-rated
✔✔✔✔✔✔✔✔✔✔✔✔✔✔✔
Universal viewing Parental approval pref. X-rated
Universal viewing
———
Parental approval pref.
——
X-rated
✔✔
End of life disposal
40
User-
adjusted rating
Broadcasted
rating
User-
adjusted rating
Broadcasted
rating
(
776.0
)
/
[
898.0
]
(
776,0
)
/
[
898,0
]
(
701.5
)
/
[
824.4
]
(
701,5
)
/
[
824,4
]
(
130.0
)
(
130,0
)
[
156.7
]
[
156,7
]
(
332.0
)
/
[
369.0
]
(
332,0
)
/
[
369,0
]
(
517.0
)
/
[
581.0
]
(
517,0
)
/
[
581,0
]
(
572.0
)
/
[
638.0
]
(
572,0
)
/
[
638,0
]
480.0
480,0
300.0
300,0
300.0
300,0
276.0
276,0
99.0
99,0
94.6
94,6
(55.0)
(55,0)
(
396.0
)
/
[
464.0
]
(
396,0
)
/
[
464,0
]
[57.0]
[57,0]
15°
15°
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the
fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked
or and of the same rating as above,
which is also indicated on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains
plug and fit an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a
safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric
shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this product may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.
The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug.
Before replacing the plug cover make sure that:
If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.
The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
( ) : LC-32XL8E/32XL8S
[ ] : LC-37XL8E/37XL8S
: LC-32XL8E/32XL8S
LC-37XL8E/37XL8S
:LC-32XL8E/LC-32XL8S
:LC-37XL8E/LC-37XL8S
LC-32XL8E
LC-32XL8S
LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISEUR COULEUR À ÉCRAN
CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD
TELEVISOR DE CRISTAL LÍQUIDO
Printed in Spain
Gedruckt in Spanien
Imprimé en Espagne
Stampato in Spagna
Gedrukt in Spanje
Impreso en España
Impresso no Espanha
LC-32XL8E/LC-37XL8E
LC-32XL8S/LC-37XL8S
OPERATION MANUAL / BEDIENUNGSANLEITUNG / MODE D'EMPLOI / MANUALE DI ISTRUZIONI / GEBRUIKSAANWIJZING / MANUAL DE MANEJO /
MANUAL DE OPERAÇÃO
D638WJZZ 1
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO
MANUAL DE OPERAÇÃO
ENGLISHDEUTSCHFRANÇAIS
ITALIANO
NEDERLANDS
ESPAÑOL
TINS-D638WJZZ
08P06-SP-NG
PIN
Printed on environmentally friendly paper
Auf ökologischem Papier gedruckt
Imprimé sur papier écologique
Stampato su carta ecologica
Afgedrukt op ecologisch papier
Impreso en papel ecológico
Impresso sobre papel ecológico
SHARP ELECTRÓNICA ESPAÑA S.A.
Polígono Industrial Can Sant Joan
Calle Sena s/n
08174 SANT CUGAT DEL VALLÉS
BARCELONA (ESPAÑA)
SHARP CORPORATION
LC-37XL8E
LC-37XL8S
PORTUGUÊS
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp LC-32XL8S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp LC-32XL8S in de taal/talen: Engels als bijlage per email.

De handleiding is 6,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Sharp LC-32XL8S

Sharp LC-32XL8S Gebruiksaanwijzing - Nederlands - 44 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info