Handleiding Sharp LC-22SV2U Operation Manual (pagina 47 van 49) (Engels, Frans, Portugees, Spaans)

13295

Verklein

Vergroot

Pagina terug

1/49

Pagina verder

LIQUID CRYSTAL TELEVISION

TÉLÉVISEUR ACL

TELEVISOR CON PANTALLA

DE CRISTAL LÍQUIDO

TELEVISOR DE CRISTAL

LÍQUIDO

LC-22SV2U

OPERATION MANUAL

MODE D’EMPLOI

MANUAL DE OPERACIÓN

MANUAL DE OPERAÇÃO

ENGLISH

FRANÇAIS

ESPAÑOL

PORTUGUÊS

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-2135

SHARP CORPORATION

LC-22SV2U

Printed on post-consumer recycled paper.

Imprimé sur du papier recyclé.

Impreso en papel reciclado.

Impresso em papel reciclado pós utilização.

Printed in Japan

Imprimé au Japon

Impreso en Japón

Impresso no Japão

TINS-A400WJN1

02P09-JKG

LC-22SV2U

LIQUID CRYSTAL TELEVISION

OPERATION MANUAL

ENGLISH

IMPORTANT INFORMATION

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrow-

head symbol, within an equilat-

eral triangle, is intended to alert

the user to the presence of

uninsulated “dangerous voltage”

within the product’s enclosure

that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within a

triangle is intended to alert the

user to the presence of impor-

tant operating and maintenance

(servicing) instructions in the

literature accompanying the

product.

IMPORTANT:

To aid reporting in case of loss or theft, please

record the TV’s model and serial numbers in the

space provided. The numbers are located at the

rear of the TV.

U.S.A. ONLY

Model No.:

Serial No.:

IMPORTANT INFORMATION (Continued)

WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment

not expressly approved by the manufacturer could void the user’s authority to operate this equipment.

“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40

of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable

ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.”

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF

PLUG TO WIDE SLOT, FULLY INSERT.

U.S.A. ONLY

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury.

Disposal of these materials may be regulated due to environmental considerations. For disposal or

recycling information, please contact your local authorities or the Electronic Industries Alliance:

www.eia.org

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp LCD Color TV product. To ensure safety and

many years of trouble-free operation of your product, please read the Safety Precau-

tions carefully before using this product.

IMPORTANT SAFETY PRECAUTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property

damage if improperly handled. This product has been engineered and manufactured with the highest

priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent

potential danger, please observe the following instructions when installing, operating and cleaning the

product. To ensure your safety and prolong the service life of your LCD color TV product, please read

the following precautions carefully before using the product.

■ Read instructions—All operating instructions must be read and understood before the product is

operated.

■ Keep this manual in a safe place—These safety and operating instructions must be kept in a

safe place for future reference.

■ Observe warnings—All warnings on the product and in the instructions must be observed

closely.

■ Follow instructions—All operating instructions must be followed.

■ Attachments—Do not use attachments not recommended by the manufacturer. Use of inad-

equate attachments can result in accidents.

■ Power source—This product must operate on a power source specified on the specification

label. If you are not sure of the type of power supply used in your home, consult your dealer or

local power company. For units designed to operate on batteries or another power source, refer

to the operating instructions.

■ Power cord protection—The power cords must be routed properly to prevent people from

stepping on them or objects from resting on them. Check the cords at the plugs and product.

■ If the AC adapter is misplaced or needs to be replaced, obtain the same type of adapter from a

SHARP service center or your dealer.

■ Overloading—Do not overload AC outlets or extension cords.

Overloading can cause fire or electric shock.

■ Entering of objects and liquids—Never insert an object into the product through vents or open-

ings. High voltage flows in the product, and inserting an object can cause electric shock and/or

short internal parts. For the same reason, do not spill water or liquid on the product.

■ Servicing—Do not attempt to service the product yourself. Removing covers can expose you to

high voltage and other dangerous conditions. Request a qualified service person to perform

servicing.

■ Repair—If any of the following conditions occurs, unplug the power cord from the AC outlet, and

request a qualified service person to perform repairs.

a.When the power cord or plug is damaged.

b.When a liquid was spilled on the product or when objects have fallen into the product.

c. When the product has been exposed to rain or water.

d.When the product does not operate properly as described in the operating instructions.

Do not touch the controls other than those described in the operating instructions. Improper

adjustment of controls not described in the instructions can cause damage, which often

requires extensive adjustment work by a qualified technician.

e.When the product has been dropped or damaged.

f. When the product displays an abnormal condition. Any noticeable abnormality in the product

indicates that the product needs servicing.

■ Replacement parts—In case the product needs replacement parts, make sure that the service

person uses replacement parts specified by the manufacturer, or those with the same character-

istics and performance as the original parts. Use of unauthorized parts can result in fire, electric

shock and/or other danger.

■ Safety checks—Upon completion of service or repair work, request the service technician to

perform safety checks to ensure that the product is in proper operating condition.

■ Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the

product according to the method recommended by the manufacturer.

■ Polarization—This AC adapter may be equipped with a polarized alternating current line plug (a

plug having one blade wider than the other). This plug will fit into the power outlet only one way.

This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the

plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the polarized plug.

■ The LCD panel is a very high technology product with 1,229,760 thin film transistors, giving you

fine picture details.

Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.

Please note that this does not affect the performance of your product.

IMPORTANT SAFETY PRECAUTIONS (Continued)

■ Cleaning—Unplug the power cord from the AC outlet before

cleaning the product. Use a damp cloth to clean the product.

Do not use liquid cleaners or aerosol cleaners.

■ Water and moisture—Do not use the product near water,

such as bathtub, washbasin, kitchen sink and laundry tub,

swimming pool and in a wet basement.

■ Stand—Do not place the product on an unstable cart, stand,

tripod or table. Placing the product on an unstable base can

cause the product to fall, resulting in serious personal

injuries as well as damage to the product. Use only a cart,

stand, tripod, bracket or table recommended by the manu-

facturer or sold with the product. When mounting the product

on a wall, be sure to follow the manufacturer’s instructions.

Use only the mounting hardware recommended by the

manufacturer.

■ When relocating the product placed on a cart, it must be

moved with utmost care. Sudden stops, excessive force and

uneven floor surface can cause the product to fall from the

cart.

■ Ventilation—The vents and other openings in the cabinet are

designed for ventilation. Do not cover or block these vents

and openings since insufficient ventilation can cause over-

heating and/or shorten the life of the product. Do not place

the product on a bed, sofa, rug or other similar surface,

since they can block ventilation openings. This product is not

designed for built-in installation; do not place the product in

an enclosed place such as a bookcase or rack, unless

proper ventilation is provided or the manufacturer’s instruc-

tions are followed.

■ The LCD panel used in this product is made of glass.

Therefore, it can break when the product is dropped or

applied with impact. Be careful not to be injured by broken

glass pieces in case the LCD panel breaks.

■ Heat sources—Keep the product away from heat sources

such as radiators, heaters, stoves and other heat-generating

products (including amplifiers).

IMPORTANT SAFETY PRECAUTIONS (Continued)

■ If an outside antenna is connected to the television equipment, be sure the antenna system is

grounded so as to provide some protection against voltage surges and built-up static charges.

Section 810 of the National Electrical Code provides information with respect to proper grounding

of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit,

size of grounding conductors, location of antenna-discharge unit, connection to grounding elec-

trodes, and requirements for the grounding electrode.

■ An outside antenna system should not be located in the

vicinity of overhead power lines or other electric light or

power circuits, or where it can fall into such power lines or

circuits. When installing an outside antenna system, extreme

care should be taken to keep from touching such power

lines or circuits as contact with them might be fatal.

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(

NEC ART 250, PART H

)

ELECTRIC

SERVICE

EQUIPMENT

NEC—NATIONAL ELECTRICAL CODE

GROUND

CLAMP

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

■ For added protection for this television equipment during a

lightning storm, or when it is left unattended and unused for

long period of time, unplug it from the wall outlet and

disconnect the antenna. This will prevent damage to the

equipment due to lightning and power-line surges.

CONTENTS

Page

IMPORTANT INFORMATION ....................................................................................................... 1, 2

DEAR SHARP CUSTOMER .............................................................................................................3

IMPORTANT SAFETY PRECAUTIONS ....................................................................................... 3-5

CONTENTS ....................................................................................................................................... 6

SUPPLIED ACCESSORIES ............................................................................................................. 7

PREPARATION ............................................................................................................................8-10

Using the Remote Control ......................................................................................................... 8

Batteries for the Remote Control .............................................................................................. 8

Antenna Connection .............................................................................................................9, 10

Power Connection .................................................................................................................... 10

DISPLAY AND CONTROL OVERVIEW .................................................................................. 11-13

Removing the Back Cover ....................................................................................................... 13

Listening with Headphones ..................................................................................................... 13

EZ SETUP ....................................................................................................................................... 14

EZ SETUP during the First Power On .................................................................................... 14

REMOTE CONTROL ...................................................................................................................... 15

BASIC OPERATION ................................................................................................................. 15-18

Turning on POWER................................................................................................................... 16

Switching TV/VIDEO [AV1/AV2/COMPONENT/TV] Modes ................................................... 16

Sound Volume ........................................................................................................................... 17

Standby ...................................................................................................................................... 17

Changing Channels .................................................................................................................. 18

SELECTING MENU ITEMS ............................................................................................................19

Selecting Menu Items .............................................................................................................. 19

ADJUSTMENTS ........................................................................................................................ 20-38

Adjusting VIEW MODE Settings .............................................................................................. 20

Moving the Picture on the Screen .......................................................................................... 21

Adjusting SLEEP TIMER Settings ........................................................................................... 22

Adjusting BRIGHTNESS Settings ........................................................................................... 23

Adjusting PICTURE FLIP Settings .......................................................................................... 24

Adjusting LANGUAGE Settings .............................................................................................. 25

Adjusting VIDEO ADJUST Settings ..................................................................................26, 27

Adjusting PRESET Settings .................................................................................................... 28

SET UP .................................................................................................................................29, 30

Adjusting BLUE SCREEN Settings ......................................................................................... 31

Adjusting CLOSED CAPTION Settings .................................................................................. 32

Adjusting V-CHIP Settings ..................................................................................................33-38

CONNECTING EXTERNAL DEVICES ..................................................................................... 39-41

Bundling Cables with Clamps ................................................................................................ 41

TROUBLESHOOTING ..............................................................................................................42, 43

SPECIFICATIONS........................................................................................................................... 44

DIMENSIONAL DRAWINGS .......................................................................................................... 45

CALLING FOR SERVICE ............................................................................................................... 46

LIMITED WARRANTY ..............................................................................................................46, 47

Make sure the following accessories are provided with the product.

SUPPLIED ACCESSORIES

AC CordAntenna Cable

“AAA” size (UM/SUM-4) Dry Battery (×2)

AC Adapter

UBATU0026GEZZ

QCNWG0003CEPA

UADP-0212CEZZ

TINS-A400WJN1

Cable Clamp (×2)

ENGLISHFRANÇAISESPAÑOLPORTUGUÊS

QACCD3097CEPA

UADP-0243CEPZ

UBATU0038CEZZ

Operation Manual

Remote Control

RRMCGA102WJSA

(See page 41)

LHLDW0109CESA

PREPARATION

Batteries for the Remote Control

Before using the LCD TV set for the first time, install two (“AAA” size, UM/SUM-4) batteries (supplied).

When the batteries become depleted and the remote control fails to operate, replace the batteries with

new (“AAA” size, UM/SUM-4) batteries.

1 Open the battery

cover.

2 Insert two (“AAA” size, UM/

SUM-4) batteries.

3 Close the battery

cover.

■ Slide the cover while

pressing the (b) part.

■ Position the positive and

negative ends of the batteries

as indicated in the compart-

ment.

Caution!

Cautions regarding batteries

Improper use of batteries can result in chemical leakage and/or explosion. Be sure to follow the instruc-

tions below.

• Place batteries with their terminals corresponding to the (+) and (–) as indicated in the compartment.

• Different types of batteries have different characteristics. Do not mix batteries of different types.

• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new

battery and/or cause the old battery to leak chemicals.

• Remove batteries when they become weak.

Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a

cloth.

• The batteries supplied with the product may have a shorter life expectancy due to storage conditions.

• If the remote control will not be used for an extended period of time, remove the batteries from the

remote control.

Using the Remote Control

■ Use the remote control by pointing it towards the remote control

sensor window on the main unit. Objects between the remote

control and sensor window may prevent proper operation.

Cautions regarding use of the remote control

■ Do not expose the remote control to shock.

In addition, do not expose the remote control to liquid, and do not place

in an area with high humidity.

■ Do not install or place the remote control under direct sunlight. The heat

may cause deformation of the unit.

■ The remote control may not work properly if the remote control sensor

window of the main unit is under direct sunlight or strong lighting. In

such case, change the angle of the lighting or LCD TV set, or operate

the remote control closer to the remote control sensor window.

–

OPC

POWER

SLEEP

■ Engage the claw on the

cover into the battery

housing and slide shut.

SLEEP indicator

POWER indicator

Remote control

sensor

OPC indicator

OPC sensor

COMPONENT

AV-IN 2/O

75-ohm

coaxial cable

300-ohm

twin-lead

VHF/UHF

antenna

VHF/UHF

antenna

300-75-ohm

adapter

(not supplied)

300-ohm

twin-lead

300-ohm

twin-lead

75-ohm

coaxial cable

OUT IN

VHF

antenna

UHF

antenna

Combiner

(not supplied)

ANT.

POWER

INPUT

DC13V

PREPARATION (Continued)

A. Combination VHF/UHF Antenna

OUTDOOR ANTENNA CONNECTION

• Use one of the following two diagrams if you connect an outdoor antenna.

A: Using a VHF/UHF combination outdoor antenna

B: Using separate VHF and/or UHF outdoor antennas

• Connect the outdoor antenna cable lead-in to the Antenna terminal (ANT.) on the rear of the TV set.

B. Separate VHF and/or

UHF Antennas

F-type connector

75-ohm coaxial cable (round)

300-ohm twin-lead cable (flat)

1. A 75-ohm system is generally a round cable with F-type

connector that can easily be attached to a terminal without

tools (not supplied).

2. A 300-ohm system is a flat “twin-lead” cable that can be

attached to a 75-ohm terminal through a 300-75-ohm

adapter (not supplied).

Antenna Connection

• The antenna requirements for good color television reception are more important than those for black & white

television reception. For this reason, a good quality outdoor antenna is strongly recommended.

The following is a brief explanation of the type of connections that are provided with the various antenna

systems.

Antenna

terminal (ANT.)

Antenna cable (supplied)

ANTENNAS

Power Connection

• Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet.

• Always turn the MAIN POWER switch of the LCD TV set to off when connecting the AC adapter.

• Unplug the AC adapter from the product and power outlet when not using for a long period of time.

PREPARATION (Continued)

Antenna Connection (Continued)

Cable TV converter/

descrambler

(not supplied)

Two-set

signal

splitter

(not

supplied)

Cable TV Line

RF switch (not supplied)

OUT

• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be

required.

POWER

INPUT

DC13V

AV-IN 2/OUT

HEAD

PHONE

• A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75-

ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. terminal.

• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay

channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber

by the cable TV company. This converter/descrambler is necessary for normal viewing of the

scrambled channels. (Set your TV to channel 3 or 4, typically one of these channels is used. If this

is unknown, consult your cable TV company.) For more specific instructions on installing cable TV,

consult your cable TV company. One possible method of utilizing the converter/descrambler

provided by your cable TV company is explained below.

Please note: An RF switch provided with two inputs (A and B) is required (not supplied).

“A” position on the RF switch (not supplied): You can view all unscrambled channels by using the TV’s

channel keys.

“B” position on the RF switch (not supplied): You can view the scrambled channels via the converter/

descrambler by using the converter’s channel keys.

CABLE TV (CATV) CONNECTION

Household power outlet

AC cord

AC adapter

POWER INPUT

terminal

(DC 13V)

MAIN POWER

• TV/VIDEO, CH ( )/( ), VOL (–)/(+), and MENU on the main unit have the same functions as the same buttons

on the remote control. Basically, this operation manual provides a description based on operation with the remote

control.

DISPLAY AND CONTROL OVERVIEW

CHVOL

TV/VIDEO MAIN POWER

MAIN POWER

TV/VIDEO

CH ( )/( )

VOL (–)/(+)

Speaker

SLEEP indicator

The SLEEP indicator lights up red when the

SLEEP TIMER is set.

Upper control panel

Remote control sensor

To change the vertical

angle of the LCD TV set,

tilt the screen up to 5

degrees forward or 10

degrees backward. The

TV set can also be

rotated 25 degrees

horizontally. Adjust the

angle so that the TV set

can be watched most

comfortably.

OPC indicator

The Optical Picture Control indicator lights up

green when the BRIGHTNESS is set to

AUTO.

Speaker

OPC sensor

POWER indicator

A green indicator lights when the power is on

and a red indicator lights when in the standby

mode (the indicator will not light when the

main power is off).

Controls

AV-IN 2/OUT

HEAD

PHONE

ANT.

VIDEO

S-VIDEO

AUDIO

POWER

INPUT

DC13V

AV-IN1

VIDEO

AUDIO

HEAD

PHONE

AUDIO

COMPONENT

AV-IN2/OUT

DISPLAY AND CONTROL OVERVIEW (Continued)

Antenna terminal

(ANT.)

AUDIO (L)

AUDIO (R)

HEADPHONE

POWER INPUT

(DC 13V)

AUDIO (L)

AUDIO (R)

VIDEO

AV-IN2/OUT

COMPONENT

AUDIO (L)

AUDIO (R)

VIDEO

S-VIDEO

AV-IN1

Carrying handle

Hold the carrying handle and tilt the

screen while steadying the stand with

your other hand.

You can adjust the screen vertically up

to 5 degrees forward or 10 degrees

backward, or rotate 25 degrees

horizontally.

● Adjusting the screen view angle

Terminals

Listening with Headphones

DISPLAY AND CONTROL OVERVIEW (Continued)

■ Before connecting cables and cords into the rear terminals, remove the

back covers. Push in the tabs and pull out the back covers carefully.

■ To mount the cover, insert the 2 hooks on the bottom of the cover

into the cabinet and press on the upper part of the back cover until

the tab locks in place with a click.

Removing the Back Cover

■ Plug the headphone mini-plug into the HEADPHONE jack located on the rear of the TV set.

Headphones

• Headphones are not included in the supplied accessories.

• No sound is heard from the main unit speakers when a headphone mini-plug is connected into the

HEADPHONE jack.

▼ On-screen display

VOLUME

c Rear terminal

AV-IN 2/OUT

VIDEO

DIO

AUDIO

-V

VIDEO

AUDIO

AUD

Adjust the sound volume

using VOL (e)/(f).

EZ SETUP

Control section of main unit

1 Press MAIN POWER, located on

the upper side of the main unit, to

turn on the TV. The SELECT

LANGUAGE mode will be dis-

played.

2 Press a/b to select “ENGLISH”,

“ESPAÑOL (SPANISH)” or

“FRANCAIS (FRENCH)”.

3 Press c/d to access EZ SETUP

mode.

4 Press d.

The tuner will automatically search

for the broadcasting and cable TV

channels. (The CH No. will

automatically increase when it

appears.)

If you want to stop the EZ SETUP

process once it has started, press

c and it will be canceled. If you

want to SET UP again, please refer

to pages 29 and 30 on SET UP.

To cancel EZ SETUP

Press c.

5 Once EZ SETUP is completed, the

lowest channel number memorized

will be displayed.

SELECT LANGUAGE

ENGL I SH

ESPAÑOL

FRANCA I S

SELECT ENTER EXIT

EZ SETUP during the First Power On

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

MAIN POWER

CHVOL

MAIN POWER

TV/VIDEO

MENU/

a/b/c/d

■ When you turn on the TV for the first time, it will automatically

memorize the broadcasting channels.

Please perform the following instructions before you press MAIN

POWER.

(1) Insert the batteries into the remote control. (See page 8.)

(2) Connect the antenna cable to the TV set. (See page 9.)

(3) Connect the AC adapter to the POWER INPUT terminal of the

product and plug in the AC cord to the wall outlet. (See page 10.)

START EZ SETUP?

CONNECT ANTENNA OR CABL E.

YES NO

EXIT

PLEASE

AIT

AUTO PROGRA

ING

STOP

• Do not let the EZ SETUP screen remain unattended for a long time.

• If EZ SETUP does not memorize all the channels in your region, please refer to pages 29 and 30 for more

information on manually memorizing the channels using CHANNEL SETTING.

• It may be difficult to preset when the broadcasting signals are weak, the channel cycle frequency is incorrect or

the frequency jamming is occurring around the area. Please refer to pages 29 and 30 for more information on

manually memorizing channels using CHANNEL SETTING.

CHVOL

POWER

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

REMOTE CONTROL

BASIC OPERATION

This product is factory set to comply with the TV broadcasting system in the United States. For Brazil,

Argentina and Uruguay, set the color system according to the country before using this product by

following the table below.

Country

TV broadcasting

Factory setting of color system User setting

system

TV Video TV/Video

U.S.A.

Color: NTSC NTSC (N358) NTSC (N358) Not required

TV ch: US ch US ch US ch or N/A

Canada, Mexico, Color: NTSC NTSC (N358) NTSC (N358)

Latin America TV ch: US ch US ch US ch

Not required or N/A

Brazil

Color: PAL-M NTSC (N358) NTSC (N358) Set color system to

TV ch: US ch US ch US ch PAL-M (see page 27)

Argentina, Color: PAL-N NTSC (N358) NTSC (N358) Set color system to

Uruguay TV ch: US ch US ch US ch PAL-N (see page 27)

MENU/

a/b/c/d (Cursor control)

(p. 19)

TV/VIDEO (p. 16)

POWER (p. 17)

VIEW MODE (p. 20)

SLEEP (p. 22)

BRIGHT (p. 23)

VOL(+)/(–) (p. 17)

MTS*

(p. 17)

PIC. FLIP (p. 24)

FLASHBACK*

CH ( )/( )

(p. 18)

Channel Select (p. 18)

Displays the receiving chan-

nel for 10 seconds.

Returns to the previous

channel.

Selects audio settings.

• The 3 Dimensional Y/C separation circuit* only works when the color system is set to N358 in TV mode and Video

mode.

*The 3 Dimensional Y/C separation circuit is used to remove flickering and color bleeding.

DISPLAY*

MUTE (p. 17)

AV2

COMPONE NT

AV1

BASIC OPERATION (Continued)

Control section of main unit

1 Press MAIN POWER, located on

the upper side of the main unit, to

on.

2 The POWER indicator instantane-

ously changes from red to green

and the main unit is turned on.

▼ On-screen display

STEREO

SAP

ONO

Turning on POWER

Notes:

Switching TV/VIDEO [AV1/AV2/COMPONENT/TV] Modes

• The On-screen indicator disappears after a

few seconds.

AV1 mode

AV2 mode

TV mode

1 Turn on the power of the con-

nected video equipment.

2 Press TV/VIDEO and select the

applicable input source. The

screen displays AV1, AV2, COM-

PONENT or TV mode each time

TV/VIDEO is pressed.

• The AV input mode indication remains

for 3 seconds.

• AV1: Video equipment connected to the

AV-IN1 input terminals.

An S-video input terminal is

additionally provided for the AV-

IN1 input. If both the S-video

terminal and normal video

terminals are connected with

cables, the S-video input terminal

takes priority.

• AV2: AV2 mode is used to adjust the

preset settings and IN or OUT

can be selected. AV2 indication is

not displayed when OUT is

selected. (For details on setting

AV2 IN/OUT, see page 28.)

• COMPONENT:

Video equipment connected to the

COMPONENT input terminals.

CHVOL

POWER

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

MAIN POWER

CHVOL

MAIN POWER

TV/VIDEO

COMPONENT mode

TV/VIDEO

POWER indicator

Sound Volume

Standby

CHVOL

POW

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

To mute the sound

CHVOL

POW

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

BASIC OPERATION (Continued)

1 Press VOL (+) to increase the sound

volume. The bar indicator shifts right.

2 Press VOL (–) to decrease the sound

volume. The bar indicator shifts left.

1 Press MUTE to temporarily turn off

the sound.

The MUTE mark

is displayed for

4 seconds.

2 Press MUTE or VOL (+)/(–) to turn

the sound back to the previous level.

The mute function is automatically

turned off when any of the following

buttons are pressed: POWER,

VOL (+)/(–) or MTS.

To turn off the LCD TV

Press POWER on the remote control.

The POWER indicator turns red.

To turn the LCD TV back on

Press POWER again.

The POWER indicator turns green.

POWER

MUTE

VOL

(+)/(–)

MTS

VOLUME

To select MTS (Multichannel TV Sound)

1 Press MTS to display the MTS

screen.

2 Press MTS to select the MTS

settings.

STEREO: stereo audio

SAP: second audio program

MONO: monophonic audio

STEREO

SAP

ONO

ON A I R

•

ON AIR appears when a STEREO or SAP

broadcast is being aired.

POWER

1 Press the button.

2 Press the

button.

BASIC OPERATION (Continued)

Changing Channels

Changing channels by using Channel Select on the remote control

To select a 1- or 2-digit channel

number (e.g., Channel 5):

Complete the following procedure

within 4 seconds.

• This LCD TV set allows you to select up to 125 channels (1 to 125). To select a channel, enter a 2-

or 3-digit number.

1 Press the button.

2 Press the button.

3 Press the

button.

To select a 3-digit channel number

(e.g., Channel 115):

Complete the following procedure

within 4 seconds.

• When selecting a 1-digit channel number,

do not fail to press the button first.

Changing channels with CH ( )/( ) on the remote control

Air Press CH ( ) and the channels change in the order shown below:

2 → 3 → . . . → 68 → 69 → 2 → 3 → . . .

Press CH (

) and the channels change in the order shown below:

3 → 2 → 69 → 68 → . . . → 3 → 2 → . . .

Cable Press CH (

) and the channels change in the order shown below:

1 → 2 → 3 → . . . → 125 →1 → 2 → 3 → . . .

Press CH (

) and the channels change in the order shown below:

3 → 2 → 1 → 125 → . . . → 3 → 2 → 1 → . . .

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

Channel

Select

0 –

1 ––

11–

115

• The 3-digit channel number can be

selected only when the receiving mode is

set to CABLE in CH-SETTING. (For details

on setting the receiving mode, see page

29.)

(

)/( )

ENU

SLEEP T I

V IDEO ADJUST

PRESET

CLOSED CAPT ION

V–CHIP BLOCK

SET UP

SELECT ENTER EXIT

SLEEP T I

SELECT ADJUST EXIT

RETURN

SLEEP T I

ER [––– RE

AIN]

PICTURE [ 30]

TINT

COLOR

BLACK LEVEL

SHARPNESS

SELECT ENTER EXIT

V IDEO ADJUST( TV)

RETURN

[ 0]

BR IGHTNESS [BRIGHT ]

AUTO PO

ER OFF

PIC. FLIP

AV2 IN/OUT

SELECT EXIT

RETURN

[OFF ]

[NOR

AL ]

[IN ]

PRESET

ADJUST

MODE

[OFF ]

DATA

[CH 1 ]

SELECT EXIT

RETURN

ADJUST

CLOSED CAPT ION

INPUT SECRET NO.

– – – –

EXIT

BLUE SCREEN [OFF ]

LANGUAGE

SELECT EXIT

RETURN

ADJUST

SET UP

CH–SETT ING

COLOR SYSTEM

RESET

[ N358 ]

SELECTING MENU ITEMS

• This LCD TV set allows you to adjust the various settings using the menu screen. Select the desired

menu item by following the steps below and then refer to the indicated page for details.

1 Press MENU to display the MENU

screen.

2 Press a/b to select the desired

menu item.

3 Press c/d to enter.

4 Press MENU to exit.

• The TINT display only appears when

the color system is set to N358 or

N443.

• The displayed items differ depending

on the setting conditions.

• The selected item changes to yellow.

• Items in magenta cannot be se-

lected.

• This product is factory set to comply

with the color system in the United

States (NTSC-N358). For Brazil

(PAL-M), Argentina (PAL-N) and

Uruguay (PAL-N), set the color

system before using this product.

• To return to the previous screen,

select RETURN.

• You can adjust some settings with

the special buttons: VIEW MODE,

SLEEP, BRIGHT and PIC. FLIP

(see pages 20, 22, 23 and 24).

Selecting Menu Items

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

* The characters in the above diagram are made to look larger for easy reading.

(Page 22)

(Pages 26, 27)

(Pages 23, 24 and 28)

(Page 32)

(Pages 35–38)

(Pages 25, 29–31)

MENU/

a/b/c/d

1 Press VIEW MODE to display

the VIEW MODE screen.

ADJUSTMENTS

Adjusting VIEW MODE Settings

Selected item Description

SIDE BAR Suitable for viewing conventional 4:3 programs in their normal format.

SMART STRETCH Suitable for stretching 4:3 programs to fill the screen.

STRETCH This mode is useful for 1.78:1 DVDs.

When viewing 1.85:1 DVDs, stretch mode will still show very thin black bands at

the top and bottom of the screen.

ZOOM Suitable for viewing wide-screen 2.35:1 anamorphic DVDs in full screen.

2 Press VIEW MODE to change

the setting. Change the setting

as shown below.

VIEW MODE

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

SMART STRETCH

SIDE BAR

STRETCH

ZOOM

You can directly change the size of the picture by pressing VIEW MODE on the remote control.

• The VIEW MODE screen automati-

cally disappears in 3 seconds.

SIDE BAR SMART STRETCH

STRETCHZOOM

SIDE BAR SMART STRETCH STRETCH ZOOM

• CAPTION or TEXT cannot be displayed while ZOOM is selected in VIEW MODE.

Selecting ZOOM in VIEW MODE while CLOSED CAPTION is set to CAPTION or TEXT will display “CC

CANNOT BE USED IN ZOOM MODE PLEASE SELECT ANOTHER VIEW TO SEE CC”. In this case, select

another view.

Press a/b to move an image on the screen to the desired position.

Press c/d to return to the initial image position.

• This setting cannot be stored. Once the LCD TV shuts down or enters

standby mode, the setting is erased. To move the picture upwards or

downwards on the screen again, you must perform the above procedure

again.

ADJUSTMENTS (Continued)

Moving the Picture on the Screen

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

You can move the picture upwards or downwards on the screen.

a/b/c/d

Directly setting the SLEEP TIMER

1 Press SLEEP to display the SLEEP

TIMER screen.

2 Press SLEEP to set the sleep timer

(in minutes).

The SLEEP TIMER is turned off

when --- is displayed.

ADJUSTMENTS (Continued)

Adjusting SLEEP TIMER Settings

CHVOL

POWER

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

–– – REMA IN

SLEEP

Setting the SLEEP TIMER on the

MENU screen

1 Press MENU to display the MENU

screen.

2 Press a/b to move the cursor to

SLEEP TIMER.

3 Press c/d to display the SLEEP

TIMER screen.

4 Press c/d to set the sleep timer

(in minutes).

The time can be set in increments

of 30 minutes and in the range

between 30 and 120 minutes.

The SLEEP TIMER is turned off

when --- is displayed.

5 Press MENU to return to the main

screen.

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

MENU/

a/b/c/d

60 REMAIN

ENU

SLEEP T I

V IDEO ADJUST

PRESET

CLOSED CAPT ION

V–CHIP BLOCK

SET UP

SELECT ENTER EXIT

SLEEP T I

SELECT ADJUST EXIT

RETURN

SLEEP T I

ER [––– RE

AIN]

You can set the SLEEP TIMER to automatically turn off the TV.

• The SLEEP TIMER screen automatically

disappears in 3 seconds.

• When you set the SLEEP TIMER, the SLEEP indicator lights up red.

• After you set the SLEEP TIMER, turning off MAIN POWER on the TV set or pressing POWER on the remote

control will cancel the SLEEP TIMER setting and the SLEEP indicator goes out.

• 5 minutes before the SLEEP TIMER turns off the TV, 5 REMAIN is displayed on the screen for 4 seconds. The

SLEEP TIMER counts down and shows a similar 4-second display for each remaining minute until the timer turns

off the TV.

---

30 60

(minutes)

120

ADJUSTMENTS (Continued)

Adjusting BRIGHTNESS Settings

You can set the brightness of the screen.

Directly setting the BRIGHTNESS

1 Press BRIGHT to display the

BRIGHTNESS screen.

2 Press BRIGHT to change the

setting.

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

MENU/

a/b/c/d

CHVOL

POW

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

BRIGHT

BR IGHTNESS [BR IGHT]

ENU

SLEEP T I

V IDEO ADJUST

PRESET

CLOSED CAPT ION

V–CHIP BLOCK

SET UP

SELECT ENTER EXIT

BR I GHTNESS [ BR IGHT ]

AUTO PO

ER OFF

PIC. FLIP

AV2 IN/OUT

SELECT EXIT

RETURN

[OFF ]

[NOR

AL ]

[IN ]

PRESET

ADJUST

Setting the BRIGHTNESS on the

MENU screen

1 Press MENU to display the MENU

screen.

2 Press a/b to move the cursor to

PRESET.

3 Press c/d to enter.

4 Press a/b to move the cursor to

BRIGHTNESS.

5 Press c/d to select the desired

brightness setting.

6 Press MENU to return to the main

screen.

BRIGHT NORMAL

DARKAUTO

• The BRIGHTNESS screen automatically

disappears in 3 seconds.

• [BRIGHT]: maximum brightness

[NORMAL]: 60% brightness (Suitable for

viewing in a well-lit area.

Saves energy.)

[DARK]: 10% brightness (Sufficiently

bright when viewing in dim

areas.)

[AUTO]: Screen brightness adjusts

according to the ambient light

of the room to conserve power

consumption. OPC indicator

lights up green.

• When set to “AUTO”, make sure no object

obstructs the OPC sensor, which could

affect its ability to sense surrounding light.

ADJUSTMENTS (Continued)

Adjusting PICTURE FLIP Settings

You can set the orientation of the picture.

Directly setting the PICTURE FLIP

1 Press PIC. FLIP to display the

PICTURE FLIP screen.

2 Press PIC. FLIP to change the

setting.

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

MENU/

a/b/c/d

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

PIC. FLIP

P I C. F L I P [NOR

AL]

P I C. F L I P [UPS I DE DO

P I C. F L I P [ROTAT E]

P I C. F L I P [MI RROR]

ABC

Setting the PICTURE FLIP on the

MENU screen

1 Press MENU to display the MENU

screen.

2 Press a/b to move the cursor to

PRESET.

3 Press c/d to enter.

4 Press a/b to move the cursor to

PIC. FLIP.

5 Press c/d to select the desired

picture flip setting.

6 Press MENU to return to the main

screen.

MIRROR ROTATENORMAL

UPSIDE DOWN

• The PICTURE FLIP screen automatically

disappears in 3 seconds.

• [NORMAL]: normal image

[MIRROR]: mirror image

[ROTATE]: rotated image

[UPSIDE DOWN]: upside down image

ENU

SLEEP T I

V IDEO ADJUST

PRESET

CLOSED CAPT ION

V–CHIP BLOCK

SET UP

SELECT ENTER EXIT

BR I GHTNESS [ BR IGHT ]

AUTO PO

ER OFF

PIC. FLIP

AV2 IN/OUT

SELECT EXIT

RETURN

[OFF ]

[NOR

AL ]

[IN ]

PRESET

ADJUST

Adjusting LANGUAGE Settings

The language for the On-Screen Display can be ENGLISH, SPANISH or FRENCH.

1 Press MENU to display the MENU

screen.

2 Press a/b to move the cursor to

SET UP.

3 Press c/d to enter.

4 Press a/b to move the cursor to

LANGUAGE.

5 Press c/d to enter.

6 Press a/b to select the lan-

guage.

7 Press MENU to return to the main

screen.

ADJUSTMENTS (Continued)

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

MENU/

a/b/c/d

ENU

SLEEP T I

V IDEO ADJUST

PRESET

CLOSED CAPT ION

V–CHIP BLOCK

SET UP

SELECT ENTER EXIT

ENU

SLEEP T I

V IDEO ADJUST

PRESET

CLOSED CAPT ION

V–CHIP BLOCK

SET UP

SELECT ENTER EXIT

BLUE SCREEN [OFF]

LANGUAGE

SELECT EXIT

RETURN

SET UP

CH–SETT ING

ENTER

LANGUAGE

ENGL ISH

ESPAÑOL

FRANCA I S

SELECT EXIT

ADJUSTMENTS (Continued)

Adjusting VIDEO ADJUST Settings

1 Press MENU to display the MENU

screen.

2 Press a/b to move the cursor to

VIDEO ADJUST.

3 Press c/d to enter.

4 Press a/b to move the cursor to

the desired item.

5 Press c/d to enter.

6 Press c/d to change the setting.

ENU

SLEEP T I

V IDEO ADJUST

PRESET

CLOSED CAPT ION

V–CHIP BLOCK

SET UP

SELECT ENTER EXIT

ENU

SLEEP T I

V IDEO ADJUST

PRESET

CLOSED CAPT ION

V–CHIP BLOCK

SET UP

SELECT ENTER EXIT

PICTURE [ 30]

TINT

COLOR

BLACK LEVEL

SHARPNESS

SELECT ENTER EXIT

V IDEO ADJUST( TV)

RETURN

[ 0]

COLOR SYSTEM

RESET

[ N358]

SELECT ADJUST EXIT

RETURN

PICTURE

– +

• See page 27 for the settings.

7 Press MENU to return to the main

screen.

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

MENU/

a/b/c/d

Video adjustments have different selection items depending on TV mode or AV mode (signal from an

external device). (See page 27.)

• TINT is displayed only when N358 or N443 is selected.

• In BLUE SCREEN, VIDEO ADJUST settings displayed in magenta cannot be selected.

• Selecting RESET will return all settings to the factory settings. (See page 26.)

• TV mode

This product is factory set to comply with the color system in the United States (NTSC-N358). For Brazil (PAL-

M), Argentina (PAL-N) or Uruguay (PAL-N), adjust the color system before using this product.

ADJUSTMENTS (Continued)

TV mode

AV mode

Adjusting VIDEO ADJUST Settings (Continued)

Selected item Press c Press d

PICTURE Decrease contrast Increase contrast

TINT Toward purple Toward green

COLOR Lower color intensity Higher color intensity

BLACK LEVEL Less brightness More brightness

SHARPNESS Soft picture Sharp picture

COLOR SYSTEM

Selected item Press c Press d

PICTURE Decrease contrast Increase contrast

TINT Toward purple Toward green

COLOR Lower color intensity Higher color intensity

BLACK LEVEL Less brightness More brightness

SHARPNESS Soft picture Sharp picture

RED-BLUE Stronger red Stronger blue

GREEN Weaker green Stronger green

COLOR SYSTEM Press c/d to select the COLOR SYSTEM.

■ When the COMPONENT mode is selected:

1 Press MENU to display the MENU

screen.

ADJUSTMENTS (Continued)

Adjusting PRESET Settings

Selected item Factory setting Setting options

BRIGHTNESS [BRIGHT] Maximum brightness [NORMAL] Brightness 60% → Suitable for viewing in a well-lit area.

Saves energy.

[DARK] Brightness 10%

→ Sufficiently bright when

viewing in dim areas.

[AUTO] Screen brightness adjusts according to the ambient

light of the room.

AUTO POWER OFF [OFF] This feature is inactive. [ON] The power of the LCD TV set is turned off when there is

(only TV mode) no signal for 5 minutes.

PIC. FLIP [NORMAL] Normal image [MIRROR] Mirror image → To display mirror images for special uses.

orientation

[ROTATE] Rotated image → To display rotated images for special

uses.

[UPSIDE DOWN] Upside down image

→ To display images upside

down for special uses.

AV2 IN/OUT [IN] AV-IN2 terminals selected [OUT ] Line Output is selected, Output volume is fixed, Speaker

as input terminals output is available.

[OUT

] Line Output is selected, Output volume is variable,

Speaker output is Mute.

ABC

2 Press a/b to move the cursor to

PRESET.

3 Press c/d to enter.

4 Press a/b to move the cursor to

the desired item.

5 Press c/d to change the setting.

6 Press MENU to return to the main

screen.

ABC

ENU

SLEEP T I

V IDEO ADJUST

PRESET

CLOSED CAPT ION

V–CHIP BLOCK

SET UP

SELECT ENTER EXIT

ENU

SLEEP T I

V IDEO ADJUST

PRESET

CLOSED CAPT ION

V–CHIP BLOCK

SET UP

SELECT ENTER EXIT

BR I GHTNESS [ BR IGHT ]

AUTO PO

ER OFF

PIC. FLIP

AV2 IN/OUT

SELECT EXIT

RETURN

[OFF ]

[NOR

AL ]

[IN ]

PRESET

ADJUST

ABC

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

MENU/

a/b/c/d

ADJUSTMENTS (Continued)

SET UP

■ CHANNEL SETTING

It is necessary to set the receiving mode to AIR or CABLE channels to receive locally broadcast TV

programs.

1 Press MENU to display the MENU

screen.

2 Press a/b to move the cursor to

SET UP.

3 Press c/d to enter.

4 Press a/b to move the cursor to

CH-SETTING.

5 Press c/d to enter.

6 Press a/b to move the cursor to

AIR/CABLE.

7 Press c/d to enter.

8 Press a/b to move the cursor to

the desired mode.

9 Press MENU to return to the main

screen.

• Receivable channels of your TV set are:

AIR channels: CABLE channels:

VHF: 2 through 13 1 (HRC and IRC mode only)

UHF: 14 through 69 2 through 125 (STD, HRC and IRC)

ENU

SLEEP T I

V IDEO ADJUST

PRESET

CLOSED CAPT ION

V–CHIP BLOCK

SET UP

SELECT ENTER EXIT

BLUE SCREEN [OFF]

LANGUAGE

SELECT EXIT

RETURN

SET UP

CH–SETT ING

ENTER

CH–SETT ING

AIR/CABLE

CH SEARCH

ORY

SELECT ENTER EXIT

RETURN

AIR/CABLE

SELECT

EXIT

AIR

CABLE

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

MENU/

a/b/c/d

SET UP (Continued)

■ Saving broadcast TV channels in the memory

1 Press MENU to display the MENU

screen, press a/b to move the

cursor to SET UP, and press c/d

to enter.

2 Press a/b to move the cursor to

CH-SETTING, and press c/d to

enter.

3 Press a/b to move the cursor to

CH SEARCH, and press c/d to

enter.

■ Adding weak or additional channels or erasing unwanted channels from TV memory

1 Press MENU to display the MENU

screen, press a/b to move the

cursor to SET UP, and press c/d

to enter.

2 Press a/b to move the cursor to

CH-SETTING, and press c/d to

enter.

3 Press a/b to move the cursor to

CH MEMORY, and press c/d to

enter.

4 Use a/b or Channel Select to

select each desired channel to add

or erase.

5 Press d to add the channel to the

TV memory or press c to erase

the channel from the TV memory.

6 Press MENU to exit.

to add channel 2

to the TV memory

to erase channel 2

from the TV memory

ADJUSTMENTS (Continued)

CH–SETT ING

AIR/CABLE

CH SEARCH

ORY

RETURN

4 Press d. The tuner will search

through all available channels in

your area and add them to the TV

memory.

START EXIT

CH SEARCH

A IR 2

• To interrupt CH SEARCH, press c.

CH SEARCH will stop at the current

channel and will not add any higher

channels.

5 Press MENU to exit.

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

MENU/

a/b/c/d

Channel

Select

CH–SETT ING

AIR/CABLE

CH SEARCH

ORY

RETURN

TO ADD EXIT

CH MEMORY

A IR 2

TO ERASE EXIT

CH MEMORY

A IR 2

• If CH SEARCH is performed again, the

previously memorized channels will be

lost.

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

MENU/

a/b/c/d

ENU

SLEEP T I

V IDEO ADJUST

PRESET

CLOSED CAPT ION

V–CHIP BLOCK

SET UP

BLUE SCREEN [OFF]

LANGUAGE

RETURN

SET UP

CH–SETT ING

ADJUSTMENTS (Continued)

■ BLUE SCREEN

Automatically turns the screen blue if no broadcast signal is received.

1 Press MENU to display the MENU

screen.

2 Press a/b to move the cursor to

SET UP.

3 Press c/d to enter.

Adjusting BLUE SCREEN Settings

4 Press a/b to move the cursor

to BLUE SCREEN.

5 Press c/d to select ON or OFF.

6 Press MENU to return to the main

screen.

ENU

SLEEP T I

VIDEO ADJUST

PRESET

CLOSED CAPT ION

V–CHIP BLOCK

SET UP

SELECT ENTER EX I T

BLUE SCREEN [OFF ]

LANGUAGE

SELECT EX I T

RETURN

ADJUST

SET UP

CH–SETT ING

BLUE SCRE EN [ ON ]

LANGUAGE

SELECT EX I T

RETURN

ADJUST

SET UP

CH–SETT ING

• When received signals are weak or interfered with by some other signals, the BLUE SCREEN function may be

activated. To watch the TV under such conditions, set BLUE SCREEN to OFF.

• The BLUE SCREEN function is activated when AV1, AV2 or COMPONENT input mode is selected with no signal

being input.

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

MENU/

a/b/c/d

Adjusting CLOSED CAPTION Settings

• If a broadcast contains Closed Caption data and MUTE is pressed, the set enters CAPTION mode automatically.

Pressing MUTE again will return the set to its previous condition.

• Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor or if there are

problems at the broadcast source. This does not necessarily indicate a problem with your set.

• If any button is pressed to call up the On-Screen Display while viewing a Closed Caption broadcast, the closed

captions will disappear momentarily.

• If no TEXT broadcast is being received while viewing in the TEXT mode, the screen may become dark and blank

for some programs. Should this occur, switch the Closed Caption mode to OFF.

• CAPTION or TEXT cannot be displayed while ZOOM is selected in VIEW MODE.

Using CAPTION or TEXT mode while ZOOM is selected will display “CC CANNOT BE USED IN ZOOM MODE

PLEASE SELECT ANOTHER VIEW TO SEE CC”. In this case, select another view.

■ SETTING CLOSED CAPTION

• This TV set is equipped with an internal Closed Caption decoder. “Closed Caption” is

a system which allows conversations, narration, and sound effects in TV programs

and home videos to be viewed as captions on the TV screen (see the illustration).

• Not all programs and videos will offer closed captioning. Please look for the “ ”

symbol to ensure that captions will be shown.

• The Closed Caption broadcasts can be viewed in two modes: CAPTION and TEXT.

For each mode, two channels are available: CH1 and CH2.

The CAPTION mode shows subscripts of dialogs and commentaries of TV dramas

and news programs while allowing a clear view of the picture.

The TEXT mode displays various information over the picture (such as TV program

schedules and weather forecasts, etc.) that is independent of the TV programs.

ADJUSTMENTS (Continued)

1 Press MENU to display the MENU

screen.

2 Press a/b to move the cursor to

CLOSED CAPTION.

3 Press c/d to enter.

4 Press a/b to move the cursor to

MODE or DATA.

5 Press c/d to change the CLOSED

CAPTION setting.

ENU

SLEEP T I

V I DEO ADJUST

PRESET

CLOSED CAPT ION

V–CH IP BLOCK

SET UP

SELECT ENTER EX I T

MOD E

[OFF ]

DATA

SELECT EX I T

RETURN

[CH 1 ]

ADJUST

CLOSED CAPT ION

MOD E

[OFF ]

DATA

RETURN

[CH 1 ]

CLOSED CAPT ION

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

MENU/

a/b/c/d

6 Press MENU to return to the main

screen.

MOD E

[ CAPT ION ]

DATA

RETURN

[CH 2 ]

CLOSED CAPT ION

MUTE

CAPTION

TEXT

OFF

MODE:

CH1

CH2

DATA:

Adjusting V-CHIP Settings

■ V-CHIP

• This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents

children from watching violent or sexual scenes that may be harmful.

• Restriction of TV programs includes two ratings that contain information about the program: the MPAA rating and

the TV Parental Guidelines. The MPAA rating is restricted by age. TV Parental Guidelines are restricted by age

and content.

• Since a TV program may use either the MPAA rating or the TV Guidelines, both should be adjusted for complete

control.

[1] MPAA RATING

MPAA RATING

Example 1:

PG-13 in the age-based rating is

blocked, this will also automatically

block the higher ratings R, NC-17

and X.

Example 2:

R in the age-based rating is

blocked, this will also automatically

block the higher ratings NC-17 and

ote:

• The MPAA rating is only age-based.

RATING

G GENERAL AUDIENCES. All ages admitted.

PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.

PG-13 PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13.

R RESTRICTED. Under 17 requires accompanying parent or adult guardian.

NC-17 NO ONE 17 AND UNDER ADMITTED.

X X is an older rating that is unified with NC-17 but may be encoded in the data of older movies.:

age

based

ADJUSTMENTS (Continued)

⇐

content based

⇒

FV V S L D

(Fantasy (Violence) (Sexual (Adult (Sexually

Violence) Situation) Language) Suggestive

Dialog)

TV-Y (All children)

TV-Y7 (Directed to Older Children)

TV-G (General Audience) X

TV-PG (Parental Guidance

✕✕ ✕ ✕

Suggested) xxx

TV-14 (Parents Strongly

✕✕ ✕ ✕

Cautioned) X

TV-MA (Mature Audience Only) X ✕✕ ✕

[2] TV PARENTAL GUIDELINES

RATING

⇑

age

based

⇓

Adjusting V-CHIP Settings (Continued)

: The content rating can be set, but this rating is not normally broadcast by TV stations.

✕ : The content rating can be set.

TV PARENTAL GUIDELINES

Example 1:

When TV-Y7 in the age-based rating is set to BLOCK, this will automatically block the higher ratings: TV-G, TV-PG, TV-14

and TV-MA. In addition, D, L, S, V and FV in CONTENT are automatically blocked unless you manually set BLOCK

CONTENT.

Example 2:

When no item in the age-based rating is blocked, D in the content-based rating will be automatically blocked.

• Age-based ratings can be modified by the content-based ratings, but only in the combinations indicated by an X in

the table above.

• Choosing a lower age-based rating blocks the higher age-based ratings regardless of content rating settings.

• If you set TV-Y and TV-Y7 to BLOCK, CONTENT will display all items.

ADJUSTMENTS (Continued)

[1] MPAA RATING

■ SETTING V-CHIP

Adjusting V-CHIP Settings (Continued)

2 Press a/b to move the cursor

to V-CHIP BLOCK, and press

c/d to enter.

3 INPUT SECRET NO. will

display. Input a 4-digit secret

number by using Channel

Select.

• When you input the secret number

for the first time, press MENU to

4 Press a/b to move the cursor to

MPAA, and press c/d to enter.

5 Press a/b to move the cursor to

PG, and then press c/d to select

BLOCK. If you set PG to BLOCK,

PG-13, R, NC-17 and X are

automatically blocked.

6 Press MENU to return to the main

screen.

• If you set G to BLOCK, all ratings are automatically blocked.

• If you set X to BLOCK, G, PG, PG-13, R and NC-17 are not blocked.

1 Press MENU to display the MENU

screen.

ADJUSTMENTS (Continued)

MENU/

a/b/c/d

Channel

Select

ENU

SLEEP T I

V I DEO ADJUST

PRESET

CLOSED CAPT ION

V–CH IP BLOCK

SET UP

ENU

SLEEP T I

V I DEO ADJUST

PRESET

CLOSED CAPT ION

V–CH IP BLOCK

SET UP

I NPUT SE CRE T NO .

– – – –

EX I T

PAA

G [ –––––]

SELECT ADJUST EXI T

RETURN

PG [ BLOCK ]

PG–13 [BLOCK]

R [ BLOCK ]

NC– 17 [ BLOCK ]

X [ BLOCK ]

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

PAA

TV GUIDEL INES

STATUS

SELECT ENTER EX I T

RETURN

V–CH I P BLOCK

[OFF]

[2] TV GUIDELINES

● Setting TV GUIDELINES

Parent Control (V-CHIP Operation Continued)

Adjusting V-CHIP Settings (Continued)

1 Repeat steps 1 to 3 of [1] MPAA

RATING. (See page 35.)

2 Press a/b to move the cursor to

TV GUIDELINES.

3 Press c/d to enter.

4 Press a/b to move the cursor to

TV-Y7, and press c/d to select

BLOCK. If you set TV-Y7 to

BLOCK, TV-G, TV-PG, TV-14 and

TV-MA are automatically blocked.

In addition, D, L, S, V and FV in

CONTENT are automatically

blocked.

5 Press MENU to return to the main

screen.

1 Press a/b to move the cursor to

BLOCK CONTENT, and press

c/d to enter.

2 Press a/b to move the cursor to

the desired item, and press c/d

to select BLOCK or ----- (un-

block).

3 Press MENU to return to the main

screen.

ADJUSTMENTS (Continued)

• If you set TV-14 to BLOCK, TV-MA is automatically blocked. Contents D, L, S and V are automatically blocked by

X in the table on page 34.

● Setting BLOCK CONTENT

PAA

TV GUIDEL INES

STATUS

SELECT ENTER EX I T

RETURN

V–CH I P BLOCK

[OFF]

TV GU IDEL INES

TV–Y [ –––––]

SELECT ADJUST EXI T

BLOCK CONT ENT

[ D L S V F V ]

RETURN

TV–Y7 [ BLOCK]

TV–G [ BLOCK ]

TV–PG [ BLOCK ]

TV– 14 [ BLOCK]

TV–

A [ BLOCK ]

TV GU IDEL INES

TV–Y [ –––––]

SELECT EX I T

BLOCK CONT ENT

[ ]

RETURN

TV–Y7 [ –––––]

TV–G [ –––––]

TV–PG [ –––––]

TV– 14 [ –––––]

TV–

A [ –––––]

ENTER

D [ –––––]

SELECT ADJUST EXI T

RETURN

L [ BLOCK ]

S [ –––––]

V [ –––––]

FV [ –––––]

BLOCK CONTENT

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

MENU/

a/b/c/d

MENU/

a/b/c/d

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

[3] ACTIVATING V-CHIP BLOCK

● Setting STATUS

Adjusting V-CHIP Settings (Continued)

1 Repeat steps 1 to 3 of [1] MPAA

RATING.

2 Press a/b to move the cursor to

STATUS.

3 Press c/d to set STATUS to ON.

• If STATUS is set to OFF, V-CHIP

BLOCK will not be activated.

1 V-CHIP HAS BEEN ACTIVATED

appears if you watch a program

with the same Program Rating

data you configured.

• V-CHIP HAS BEEN ACTIVATED will

not be displayed if STATUS is not

configured to ON.

[4] CANCELING THE V-CHIP BLOCK SCREEN WHILE V-CHIP BLOCK IS ACTIVATED

2 Press MENU to display INPUT

SECRET NO..

3 Input the 4-digit secret number by

using Channel Select; V-CHIP

BLOCK is temporarily canceled. If

you input an incorrect secret

number, SECRET NO. IS INCOR-

RECT is displayed. In this case,

input the correct secret number.

• If you turn the power on from off, V-CHIP BLOCK will be activated again.

• If you select V-CHIP BLOCK again by using MENU, V-CHIP BLOCK will be turned on again.

ADJUSTMENTS (Continued)

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

MENU/

a/b/c/d

4 Press MENU to return to the main

screen.

V–CHIP HAS BEEN ACT I VATED

TV–Y

I NPUT SE CRE T NO .

– – – –

EX I T

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

Channel

Select

PAA

TV GUIDEL INES

STATUS

SELECT ENTER EX I T

RETURN

V–CH I P BLOCK

[ON]

You can activate V-CHIP BLOCK after setting [1] MPAA RATING and/

or [2] TV GUIDELINES.

[5] CHANGING V-CHIP BLOCK SETTINGS

Adjusting V-CHIP Settings (Continued)

1 Repeat steps 1 to 2 of [1] MPAA

RATING, then INPUT SECRET

NO. will be displayed.

2 Input the 4-digit secret number by

using Channel Select; the V-

CHIP select mode will be dis-

played. Set V-CHIP BLOCK again.

[6] CHANGING OR CLEARING THE SECRET NUMBER

1 Repeat steps 1 to 2 of [1] MPAA

RATING, or 1 to 2 of [4]

CANCELING THE V-CHIP

BLOCK SCREEN WHILE V-CHIP

BLOCK IS ACTIVATED, then

INPUT SECRET NO. will be

displayed.

2 Press and hold both CH ( ) and

VOL (+) on the TV set simultane-

ously until the message INPUT

SECRET NO. blinks.

3 Press MENU to exit.

ADJUSTMENTS (Continued)

CHVOL

VIEW MODE

MUTE

SLEEP PIC. FLIP

BRIGHT DISPLAY TV/VIDEO

FLASHBACK

I NPUT SE CRET NO .

– – – –

EX I T

I NPUT SE CRET NO .

* * * *

EX I T

Channel

Select

If you forget the secret number, clear the secret number as follows.

VOL

CH MENU

Upper control panel

of the main unit

VOL (+)

CH ( )

CONNECTING EXTERNAL DEVICES

You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals

located on the rear of the TV set.

When connecting an external device, turn off the power of the main unit first to prevent any possible

damage.

• Video camera

• Home video game system

To COMPONENT terminal

• PC connection is not possible.

• For the cable, use a commercially available audio/video cable.

• Only connect audio/video signals to AV-IN1 and 2 terminals. Connecting other signals may result in a malfunction.

• AV-IN1 has 2 video input terminals: VIDEO and S-VIDEO. When you connect external devices to both terminals

(and if you select AV-IN1), you can only view pictures from the S-VIDEO terminal. To view the picture from the

VIDEO terminal, do not connect any external device to the S-VIDEO terminal.

• For more information about external device connections, see the manuals of your external devices.

-IN

-V

AV-IN 2/OUT

HEAD

PHONE

Example of external devices that can be connected

To AV-IN2 terminal

* If your external device has a component

terminal, COMPONENT connection is

recommended (you can view high-quality

pictures).

• DVD Player, etc.

• VCR

• Laser disc player

* If your external device has an S-video terminal,

S-VIDEO connection is recommended.

To AV-IN1 terminal

CONNECTING EXTERNAL DEVICES (Continued)

Connecting a VCR, DVD player or a video camera (AV-IN1/2/COMPONENT)

• If your VCR (or other external devices) has an S-video terminal, S-VIDEO connection is recommended. (Use an

S-video cable.)

• When you connect external devices to both S-VIDEO and VIDEO terminals (and if you select AV-IN1), you can

only view pictures from the S-VIDEO terminal.

• You cannot view multiple or synthesized pictures by connecting two or more external devices. When connecting

an external device, use care to connect the video and audio cables to the corresponding terminals.

AV-IN 1

AUDIO

S-VIDEO

ANT.

VIDEO

POWER

INPUT

DC13V

-IN

2/O

VIDEO

AUDIO

HEAD

PHONE

AUDIO

COM

PONENT

AV-IN2/OUT

ANT.

VIDEO

S-VIDEO

AUDIO

POW

INPUT

DC13V

AV-IN1

To AV-IN2 terminal

To audio/video output

terminal

To COMPONENT input

(Video) terminal

To COMPONENT input

(Audio) terminal

To AV-IN1 terminal

To audio/video output

terminal

Video

Audio (L)

Audio (R)

Audio (L)

Audio (R)

DVD Player

VCR

Video

Audio (L)

Audio (R)

Video camera

To S-VIDEO input terminal

To S-video output terminal

S-video

VCR

AV-IN 1

AUDIO

S-VIDEO

ANT.

VIDEO

POWER

INPUT

DC13V

COMPONENT

VIDEO

AUDIO

COMPONENT

AV-IN2/OUT

CONNECTING EXTERNAL DEVICES (Continued)

Outputting video and audio (video output)

You can output video and audio signals from the TV set through the AV output terminals (AV-OUT).

• When using AV2 as an output terminal, select PRESET in the MENU and set AV2 IN/OUT to OUT.

(See page 28.)

• The factory setting for AV2 IN/OUT is IN.

• AV2 has 2 OUT modes (see page 28).

• When using the S-video input for AV-IN1, no video output will be made to the AV output terminal, but audio output

will be made for connection to external audio systems.

Connect to a VCR,

audio amplifier, etc.

Bundling Cables with Clamps

• Secure cables and cords with the supplied

cable clamps so that they do not get caught

when mounting the covers.

-IN

-V

VIDEO

AUDIO

Cable clamps (x2)

TROUBLESHOOTING

■ Before calling for repair services, make the following checks for possible remedies to

the encountered symptoms.

TV set

Problem Check item

Reference

Pages

There is no

picture.

There is no

picture from

AV-IN1.

–

Sound

Picture

• Make sure the AC adapter is properly inserted in the

power outlet.

• Reception other than those of broadcasting stations

can be considered.

• Make sure the input mode is set to TV.

• Make sure the MAIN POWER switch of the main unit

is on.

There is no

picture or

sound.

Picture

• Make sure the BLACK LEVEL is properly adjusted.

• Fluorescent lamp may have reached the end of

service life.

• Make sure the S-Video terminal has nothing con-

nected.

There is no

sound.

• Make sure the volume is not set to minimum.

• Make sure the sound is not set to mute.

• Make sure that headphones are not connected.

There is no

picture or

sound, just

noise.

• Make sure the antenna cable is properly connected.

• Bad reception could be the problem.

Picture is not

clear.

• Make sure the antenna cable is properly connected.

• Bad reception could be the problem.

Picture is light

or improperly

tinted.

• Check color adjustment.

• Check color system setting.

The picture is

too dark.

• Press the BRIGHT button or set the BRIGHTNESS

settings.

• Check PICTURE and BLACK LEVEL adjustment.

• Fluorescent lamp may have reached the end of

service life.

Remote control does not work.

• Check the batteries of the remote control.

• Make sure the remote sensor window is not under

strong lighting.

26, 27

–

26, 27

Antenna

Problem Check item

• The reception may be weak.

• The quality of the broadcast may also be bad.

• Make sure the antenna is facing the right direction.

• Make sure the outside antenna is connected.

The picture is

not sharp.

TROUBLESHOOTING (Continued)

The picture

moves.

The picture is

doubled or

tripled.

• Make sure the antenna is facing the right direction.

• There may be reflected electric waves from mountains or

buildings.

The picture is

spotted.

• There may be interference from automobiles, trains, high

voltage lines, neon lights, etc.

• There may be interference between the antenna cable and AC

cord. Try positioning them further apart.

There are

stripes on the

screen or

colors fade.

• Is the unit receiving interference from other devices?

Transmission antennas of radio broadcasting stations, transmis-

sion antennas of amateur radios and cellular phones may also

cause interference.

• Use the unit as far apart as possible from devices that may

cause possible interference.

■ Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear

slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight

or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.

Storage temperature: –4°F to +140°F (–20°C to +60°C)

SPECIFICATIONS

Items LC-22SV2U

Model

LCD panel 22” Advanced Super View & BLACK TFT LCD

Number of dots 1,229,760 dots WVGA

Video color systems N358, N443, PAL, PAL-M, PAL-N, SECAM, PAL-60

Destination USA/Latin America/Taiwan

TV Standard (CCIR) NTSC/PAL-M/PAL-N

TV function TV Tuning System PLL 181 ch.

STEREO MTS+SAP

CATV 125 ch.

3 Dimensional Y/C separation circuit Yes (N358 only)

Digital comb filter Yes

Brightness 430 cd/m

Lamp life 60,000 hours

Viewing angles H: 170° V: 170°

Audio amplifier 2.5 W × 2

Speakers ø2 in. (5 cm), 2 pcs.

AV-IN1 AV-IN1, S-VIDEO-IN

AV-IN2 AV-IN2/AV-OUT

Terminals COMPONENT COMPONENT-IN, AUDIO-IN

Antenna F-Type

Headphone Mini-jack for stereo (ø 3.5 mm)

OSD language English/French/Spanish

Power supply DC 13 V, AC 110–240 V, 50/60 Hz

Power consumption 62 W (0.8 W Standby): AC 120 V (with AC adapter)

55W: DC 13 V

Weight 20.5 lbs. (9.3 kg), w/o accessories

Accessories Remote control, Batteries (x2), Antenna cable, AC

adapter, AC cord, Cable clamps (x2), Operation Manual

As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for

product improvement without prior notice. The performance specification figures indicated are nominal values of

production units. There may be some deviations from these values in individual units.

DIMENSIONAL DRAWINGS

Unit: inch/(mm)

AUDIO OUT

AV-IN 1

RGB

AV-IN 2

S-VIDEO

VIDEO

AUDIO

POWER

INPUT

DC13V

TV/VIDEO

(165.4)

(250)

(31)

(108)

(100)

(43.9)1

(43.9)

(100)

(490.62)19

(490.62)

(739)

(420)

(180.6)

(367)

(462)

(180.6)

(95) 14

(367)

(462)

(72.5)

(59.5)

(268.32)

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-2135

SHARP CORPORATION

LIMITED WARRANTY

END-USER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first end user purchaser that this Sharp brand product (the

“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it

will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured

equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below

nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or

other misuse, abnormal service or handling, or which has been altered or modified in design or construction.

In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide

proof of purchase to the servicer.

To the extent permitted by applicable state law, the warranties set forth herein are in lieu of, and exclusive of, all other

warranties, express or implied. Specifically, ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE

EXCLUDED. ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY,

FITNESS FOR USE, AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. If, under

applicable state law, implied warranties may not validly be disclaimed or excluded, the duration of such implied warranties is

limited to the period(s) from the date of purchase set forth below.

Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those

described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.

The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and

exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described

herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the

Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.

In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused

by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any

way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on

warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.

Model Specific Section

Your Product Model Number & Description: LC-22SV2U LCD Color Television

(Be sure to have this information available when you need service for

your Product.)

Warranty Period for this Product: One (1) year parts and labor from the date of purchase.

Additional Item(s) Excluded from

Warranty Coverage (if any): None

Where to Obtain Service: From a Sharp Authorized Servicer located in the United States.

To find the location of the nearest Sharp Authorized Servicer, call

Sharp toll free at 1-800-BE-SHARP.

What to do to Obtain Service: Ship prepaid or carry in your Product to a Sharp Authorized Servicer.

Be sure to have Proof of Purchase available. If you ship the Product,

be sure it is insured and packaged securely.

TO OBTAIN PRODUCT INFORMATION, CALL 1-888-LCD-SHARP OR VISIT www.sharpusa.com

CALLING FOR SERVICE

For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer

assistance, please call 1-800-BE-SHARP.

LIMITED WARRANTY

Consumer Electronics Products

Congratulations on your purchase!

Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer purchaser for this

Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer:

Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship. If any such

defects should be found in this product within the applicable warranty period, Sharp shall, at its option, repair or replace the product as

specified herein.

This warranty shall not apply to:

(a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate

use as outlined in the owner’s manual.

(b) Any Sharp product tampered with, modified, adjusted or repaired by any party other than Sharp, Sharp’s Authorized Service Centres

or Sharp’s Authorized Servicing Dealers.

(c) Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but not limited to

head cleaning tapes and chemical cleaning agents.

(d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product including but

not limited to earphones, remote controls, AC adapters, batteries, temperature probe, stylus, trays, filters, belts, ribbons, cables and

paper.

(e) Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.

(f) Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or liquid

spillage.

(g) Any product received without appropriate model, serial number and CSA/cUL markings.

(h) Any products used for rental or commercial purposes.

(i) Any installation, setup and/or programming charges.

Should this Sharp product fail to operate during the warranty period, warranty service may be obtained upon delivery of the Sharp product

together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized Sharp Service Centre or an

Authorized Sharp Servicing Dealer. In home warranty service may be provided at Sharp’s discretion on any Sharp television with the

screen size of 27” or larger and on any Sharp Over-the-Range Microwave Oven.

This warranty constitutes the entire express warranty granted by Sharp and no other dealer, service centre or their agent or employee is

authorized to extend, enlarge or transfer this warranty on behalf of Sharp. To the extent the law permits, Sharp disclaims any and all

liability for direct or indirect damages or losses or for any incidental, special or consequential damages or loss of profits resulting from a

defect in material or workmanship relating to the product, including damages for the loss of time or use of this Sharp product or the loss

of information. The purchaser will be responsible for any removal, reinstallation, transportation and insurance costs incurred. Correction of

defects, in the manner and period of time described herein, constitute complete fulfillment of all obligations and responsibilities of Sharp

to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict

liability or otherwise.

WARRANTY PERIODS: Parts & Labour (exceptions noted)

Audio Products 1 year

Camcorder 1 year

DVD Products 1 year

LCD Projector 1 year (lamp 90 days)

LCD TV 1 year

Microwave Oven 2 years (magnetron component-3 additional years)

Television Products 1 year (picture tube component-1 additional year)

VCR Product 1 year

Vacuum Cleaner 1 year

To obtain the name and address of the nearest Authorized Sharp Service Centre or Dealer, please contact:

SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road East Mississauga, Ontario L4Z 1W9

For more information on this Warranty, Sharp Extended Warranty

Offers, Sharp Canada Products, Accessory Sales, Dealer or Service

Locations, please call (905) 568-7140

Visit our Web site: www.sharp.ca

VALID IN CANADA ONLY

LIQUID CRYSTAL TELEVISION

TÉLÉVISEUR ACL

TELEVISOR CON PANTALLA

DE CRISTAL LÍQUIDO

TELEVISOR DE CRISTAL

LÍQUIDO

LC-22SV2U

OPERATION MANUAL

MODE D’EMPLOI

MANUAL DE OPERACIÓN

MANUAL DE OPERAÇÃO

ENGLISH

FRANÇAIS

ESPAÑOL

PORTUGUÊS

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-2135

SHARP CORPORATION

LC-22SV2U

Printed on post-consumer recycled paper.

Imprimé sur du papier recyclé.

Impreso en papel reciclado.

Impresso em papel reciclado pós utilização.

Printed in Japan

Imprimé au Japon

Impreso en Japón

Impresso no Japão

TINS-A400WJN1

02P09-JKG

handleiding lc24le240e ideaal handleiding gaarne in het Hollands nog in englis Gesteld op 21-4-2020 om 15:47
Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp LC-22SV2U Operation Manual bij:

nieuwe vragen en antwoorden
nieuwe handleidingen

U ontvangt een email met instructies om u voor één of beide opties in te schrijven.

Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp LC-22SV2U Operation Manual in de taal/talen: Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 5,55 mb groot.

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.

Sharp LC-22SV2U Operation Manual Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info

Sharp LC-22SV2U Operation Manual Handleiding

Hulp nodig? Stel uw vraag in het forum

Forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info