Handleiding Sharp LC-20S5U Operation Manual (pagina 1 van 39) (Engels)

13291

Verklein

Vergroot

Pagina terug

1/39

Pagina verder

LC-20S5U

OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN MANUAL DE OPERAÇÃO

Printed in Mexico

Imprimé au Mexique

Impreso en México

Impresso no México

TINS-C234WJZZ

06P02-MX-NM

ENGLISHFRANÇAISESPAÑOLPORTUGUÊS

LIQUID CRYSTAL TELEVISION

TÉLÉVISEUR ACL

TELEVISOR CON PANTALLA DE

CRISTAL LÍQUIDO

TELEVISOR DE CRISTAL LÍQUIDO

OPERATION MANUAL

MODE D’EMPLOI

MANUAL DE OPERACIÓN

MANUAL DE OPERAÇÃO

Products that have earned the ENERGY STAR

are designed to protect the environment

through superior energy efﬁciency.

Les produits agréés ENERGY STAR

sont conçus pour protéger l’environnement par un

rendement énergétique supérieur.

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-2135

SHARP CORPORATION

LC-20S5U_E_Hyo1-4.indd 1 2005/12/21 10:00:11

Unit: inch (mm)

Dimensional Drawings

(100)

/64 (100)

/32

(62.6)

/64 (482.9)

/8 (142.4)

/64 (241.6)

/64

(101.1)

/64

(61.9)

/64 (379.7)

/8 (403.1)

(300.8)

(293)

(457.5)

/32 (432.5)

/64

(42.9)

/64 (475.4)

LC-20S5U_E_Hyo1-4.indd 2 2005/12/21 10:00:13

ENGLISHFRANÇAISESPAÑOLPORTUGUÊS

OPERATION MANUAL

IMPORTANT:

To aid reporting in case of loss or theft, please record the TV’s

model and serial numbers in the space provided. The numbers

are located at the rear of the TV.

Model No.:

Serial No.:

ENGLISH

IMPORTANT INFORMATION

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning ﬂash with arrow-head symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufﬁcient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within a triangle is

intended to alert the user to the presence

of important operating and maintenance

(servicing) instructions in the literature

accompanying the product.

WARNING: FCC Regulations state that any unauthorized changes or modiﬁcations to this equipment not expressly

approved by the manufacturer could void the user’s authority to operate this equipment.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE

SLOT, FULLY INSERT.

CAUTION:

DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR

TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS

DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE

RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE

MANUFACTURER’S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING

ACCESSORIES RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART

COMBINATION SHOULD BE MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND

UNEVEN SURFACES MAY CAUSE THE PRODUCT AND CART COMBINATION TO OVERTURN.

“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National

Electrical Code that provides guidelines for proper grounding and, in particular, speciﬁes that the cable ground shall be connected to the

grounding system of the building, as close to the point of cable entry as practical.”

This product utilizes tin-lead solder, and ﬂuorescent lamp containing a small amount of mercury. Disposal of these materials

may be regulated due to environmental considerations. For disposal or recycling information, please contact your local

authorities or the Electronic Industries Alliance: www.eia.org

U.S.A. ONLY

LC-20S5U_E.indb 1 2005/12/15 11:18:21

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years

of trouble-free operation of your product, please read the Important Safety Precautions carefully

before using this product.

IMPORTANT SAFETY PRECAUTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if

improperly handled. This product has been engineered and manufactured with the highest priority on safety. However,

improper use can result in electric shock and/or ﬁre. In order to prevent potential danger, please observe the following

instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of

your LCD color TV product, please read the following precautions carefully before using the product.

■

Read instructions—All operating instructions must be read and understood before the product is operated.

■

Keep this manual in a safe place—These safety and operating instructions must be kept in a safe place for future

reference.

■

Observe warnings—All warnings on the product and in the instructions must be observed closely.

■

Follow instructions—All operating instructions must be followed.

■

Attachments—Do not use attachments not recommended by the manufacturer. Use of inadequate attachments

can result in accidents.

■

Power source—This product must operate on a power source speciﬁed on the speciﬁcation label. If you are

not sure of the type of power supply used in your home, consult your dealer or local power company. For units

designed to operate on batteries or another power source, refer to the operating instructions.

■

AC cord protection—The AC cord must be routed properly to prevent people from stepping on it or objects from

resting on it. Check the cord at the plugs and product.

■

Overloading—Do not overload AC outlets or extension cords.

Overloading can cause ﬁre or electric shock.

■

Entering of objects and liquids—Never insert an object into the product through vents or openings. High voltage

ﬂows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same

reason, do not spill water or liquid on the product.

■

Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and

other dangerous conditions. Request a qualiﬁed service person to perform servicing.

■

Repair—If any of the following conditions occurs, unplug the AC cord from the AC outlet, and request a qualiﬁed

service person to perform repairs.

a. When the AC cord or plug is damaged.

b. When a liquid was spilled on the product or when objects have fallen into the product.

c. When the product has been exposed to rain or water.

d. When the product does not operate properly as described in the operating instructions.

Do not touch the controls other than those described in the operating instructions. Improper adjustment of

controls not described in the instructions can cause damage, which often requires extensive adjustment work

by a qualiﬁed technician.

e. When the product has been dropped or damaged.

f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the

product needs servicing.

■

Replacement parts—In case the product needs replacement parts, make sure that the service person uses

replacement parts speciﬁed by the manufacturer, or those with the same characteristics and performance as the

original parts. Use of unauthorized parts can result in ﬁre, electric shock and/or other danger.

■

Safety checks—Upon completion of service or repair work, request the service technician to perform safety

checks to ensure that the product is in proper operating condition.

■

Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product

according to the method recommended by the manufacturer.

■

Polarization—This AC cord may be equipped with a polarized alternating current line plug (a plug having one

blade wider than the other). This plug will ﬁt into the power outlet only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to ﬁt, contact your

electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the polarized plug.

LC-20S5U_E.indb 2 2005/12/15 11:18:21

IMPORTANT SAFETY PRECAUTIONS (Continued)

■

The Liquid Crystal panel is a very high technology product with 921,600 thin ﬁlm transistors, giving you ﬁne picture

details.

Occasionally, a few non-active pixels may appear on the screen as a ﬁxed point of blue, green or red.

Please note that this does not affect the performance of your product.

■

Cleaning—Unplug the AC cord from the AC outlet before cleaning the product.

Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol

cleaners.

■

Water and moisture—Do not use the product near water, such as bathtub,

washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement.

■

Stand—Do not place the product on an unstable cart, stand, tripod or table.

Placing the product on an unstable base can cause the product to fall, resulting

in serious personal injuries as well as damage to the product. Use only a

cart, stand, tripod, bracket or table recommended by the manufacturer or sold

with the product. When mounting the product on a wall, be sure to follow the

manufacturer’s instructions. Use only the mounting hardware recommended by

the manufacturer.

■

When relocating the product placed on a cart, it must be moved with utmost

care. Sudden stops, excessive force and uneven ﬂoor surface can cause the

product to fall from the cart.

■

Ventilation—The vents and other openings in the cabinet are designed for

ventilation. Do not cover or block these vents and openings since insufﬁcient

ventilation can cause overheating and/or shorten the life of the product. Do not

place the product on a bed, sofa, rug or other similar surface, since they can

block ventilation openings. This product is not designed for built-in installation; do

not place the product in an enclosed place such as a bookcase or rack, unless

proper ventilation is provided or the manufacturer’s instructions are followed.

■

The Liquid Crystal panel used in this product is made of glass. Therefore, it can

break when the product is dropped or applied with impact. Be careful not to be

injured by broken glass pieces in case the Liquid Crystal panel breaks.

■

Heat sources—Keep the product away from heat sources such as radiators,

heaters, stoves and other heat-generating products (including ampliﬁers).

LC-20S5U_E.indb 3 2005/12/15 11:18:23

■

If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to

provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical

Code provides information with respect to proper grounding of the mast and supporting structure, grounding of

the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit,

connection to grounding electrodes, and requirements for the grounding electrode.

■

Power Lines – An outside antenna system should not be located in the vicinity

of overhead power lines or other electric light or power circuits, or where it can

fall into such power lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such power lines or circuits

as contact with them might be fatal.

ANTENNA

LEAD-IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCT

ORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

ELECTRIC

SERVICE

EQUIPMENT

NEC—NATIONAL ELECTRICAL CODE

GROUND

CLAMP

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

■

Lightning – For added protection for this television equipment during a lightning

storm, or when it is left unattended and unused for a long period of time, unplug

it from the wall outlet and disconnect the antenna. This will prevent damage to

the equipment due to lightning and power-line surges.

■

To prevent ﬁre, never place any type of candle or ﬂames on the top or near the

TV set.

■

To prevent ﬁre or shock hazard, do not expose this product to dripping or

splashing. No objects ﬁlled with liquids, such as vases, should be placed on the

product.

■

To prevent ﬁre or shock hazard, do not place the AC cord under the TV set or

other heavy items.

IMPORTANT SAFETY PRECAUTIONS (Continued)

■

Do not display a still picture for a long time, as this could cause an afterimage to remain.

■

Install the product on the place where the AC cord can be unplugged easily from the AC outlet, or from the AC

INPUT terminal on the rear of the product.

LC-20S5U_E.indb 4 2005/12/15 11:18:25

IMPORTANT INFORMATION .....................................

DEAR SHARP CUSTOMER ....................................... 2

IMPORTANT SAFETY PRECAUTIONS ..................... 2

Supplied Accessories ............................................... 5

Before Using the LCD TV Set ................................... 6

Preparation ................................................................ 7

Installing Batteries in the Remote Control ............. 7

Using the Remote Control ..................................... 7

Antenna Connection .............................................. 8

Power Connection ................................................. 9

Part Names of the Main Unit .................................. 10

Listening with Headphones ................................. 10

How to Fix the Cables ..........................................11

Part Names of the Remote Control ....................... 12

TV Signals in Your Region ..................................... 12

Connecting External Devices ................................ 13

Outputting Video and Audio (Video Output) ........ 13

EZ SETUP (With AUTO CLOCK Setting) ............... 14

EZ SETUP during the First Power On ................. 14

Setting the CLOCK .................................................. 15

AUTO CLOCK Setting ......................................... 15

MANUAL CLOCK Setting ................................... 15

TIME DISPLAY .................................................... 16

Basic Operation ...................................................... 16

Turning On and Off the Main Power .................... 16

Standby ............................................................... 16

Switching the Input Modes

(INPUT1/INPUT2/INPUT3/TV) ...................... 17

Sound Volume ..................................................... 17

Changing Channels ............................................. 18

Selecting Menu Items .......................................... 18

Basic Adjustment Settings .................................... 20

AV MODE ............................................................ 20

OPC ..................................................................... 20

BACKLIGHT ........................................................ 21

PICTURE Adjustments ........................................ 21

COLOR TEMPERATURE ................................... 22

I/P SETTING ....................................................... 22

NOISE CLEAN .................................................... 22

FILM MODE ........................................................ 23

AUDIO Adjustments ............................................ 23

Useful Features ....................................................... 24

CH SETUP .......................................................... 24

SETUP ................................................................ 25

V-CHIP Settings .................................................. 26

CLOSED CAPTION ............................................ 30

VIEW MODE ....................................................... 31

AUDIO ONLY ...................................................... 32

BLUE SCREEN ................................................... 32

SLEEP TIMER ..................................................... 33

WAKE-UP TIMER ............................................... 33

NO SIGNAL OFF ................................................ 34

NO OPERATION OFF ......................................... 34

PICTURE FLIP .................................................... 34

Troubleshooting ...................................................... 35

Speciﬁcations .......................................................... 36

Calling for Service .................................................. 37

LIMITED WARRANTY .............................................. 37

Dimensional Drawings

•

The dimensional drawings for the LCD TV set are

shown on the inside back cover.

Make sure the following accessories are provided with the LCD TV set.

Supplied Accessories

Contents

• The AC cord enclosed in this product is for 110-125V. For using it on the 125-240V AC, please consult the following.

SHARP ELECTRONICS CORPORATION 6100 Blue Lagoon Drive, Suite 230, Miami, Florida 33126, U.S.A.

Operation manual“AAA” size batteries (

page 7

page

Cable clamp

page 11

pages 7 and 1

AC cordRemote control unit

LC-20S5U_E.indb 5 2005/12/15 11:18:27

To use your LCD TV set, perform steps below.

Check the supplied accessories. (See page

5.)

Insert two “AAA” size batteries into the remote control. (See page

7.)

• Open the battery cover, and then insert batteries with their terminals corresponding to the (+) and (-) indications in the

battery compartment.

Open the terminal cover. (See page 8.)

• Pull down the hook located on the upper side of terminal cover to open the cover.

Connect the antenna cable. (See page 8.)

Connect with external devices. (See page 13.)

INPUT1 Terminal (COMPONENT)

Terminal for component connection.

INPUT2 Terminal

Terminal for S-video connection.

INPUT3/OUTPUT Terminal

Terminal for INPUT/OUTPUT connection.

Connect the AC cord to the AC INPUT terminal of the LCD TV set and plug in the AC cord to the wall outlet.

(See page 9.)

Turn on the main power. (See page 16.)

Press POWER on the upper side of the main unit.

The POWER/WAKE UP TIMER indicator located on the front of the main unit changes from red to green.

POWER

POWER/WAKE UP TIMER indicator

Start EZ SETUP. (See page 14.)

• The broadcasting channels and clock will be memorized automatically.

Before Using the LCD TV Set

LC-20S5U_E.indb 6 2005/12/15 11:18:30

Installing Batteries in the Remote Control

Before using the LCD TV set for the ﬁrst time, install the two “AAA” size batteries supplied in the remote control. When the

batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.

Open the battery cover.

Insert two “AAA” size batteries.

Close the battery cover.

■

Place batteries with their

terminals corresponding

to the (

) and (

–

)

indications in the battery

compartment.

Caution!

Precautions regarding batteries

■

Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.

• Place batteries with their terminals corresponding to the (+) and (–) indications.

• Different types of batteries have different characteristics. Do not mix batteries of different types.

• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old

batteries to leak chemicals.

• Remove batteries as soon as they are depleted. Chemicals that leak from batteries can cause a rash. If chemical

leakage is found, wipe it off with a cloth.

• The batteries supplied with the LCD TV set may have a shorter operating time due to storage conditions.

• If the remote control is not to be used for a long period of time, remove the batteries from the remote control.

Preparation

■

Engaging the lower

claw with the remote

control, close the cover.

Using the Remote Control

■

Use the remote control by pointing it towards the remote sensor

window of the main unit. Objects between the remote control and

sensor window may prevent proper operation.

Cautions regarding use of the remote control

■

Do not apply shock to the remote control. In addition, do not

expose the remote control to liquids, and do not place it in an area

with high humidity.

■

Do not install or place the remote control in direct sunlight. The

heat may cause deformation of the unit.

■

The remote control may not work properly if the remote sensor

window is in direct sunlight or strong lighting. In such a case,

change the angle of the lighting or main unit, or operate the

remote control closer to the remote sensor window.

■

Slide the cover while

pressing the (

)

part.

17' (5m)

30°

Remote

sensor

LC-20S5U_E.indb 7 2005/12/15 11:18:33

Preparation (Continued)

Antenna Connection

OUTDOOR ANTENNA CONNECTION

1. A 75-ohm system is generally a round cable with F-type connector that

can easily be attached to a terminal without tools (not supplied).

2. A 300-ohm system is a ﬂat “twin-lead” cable that can be attached to a

75-ohm terminal through a 300/75-ohm adapter (not supplied).

• The antenna requirements for good color television reception are more important than those for black & white television

reception. For this reason, a good quality outdoor antenna is strongly recommended.

The following is a brief explanation of the type of connections that are provided with the various antenna systems.

ANTENNAS

75-ohm

coaxial cable

300-ohm

twin-lead

VHF/UHF

antenna

VHF/UHF

antenna

Pull down the hook

to open the cover.

300/75-ohm

adapter

(not supplied)

300-ohm

twin-lead

300-ohm

twin-lead

75-ohm

coaxial cable

IN OUT

VHF

antenna

UHF

antenna

Combiner

(not supplied)

ANT.

(Antenna

terminal)

A. Combination VHF/UHF antenna

B. Separate VHF and/or UHF antennas

Antenna Cable

(commercially available)

F-type connector should be ﬁnger-tightened only.

When connecting the RF cable to the LCD TV set, do not tighten F-type connector

with tools.

If tools are used, it may cause damage to your LCD TV set.

(breaking of internal circuit, etc.)

NOTICE

F-type connector

75-ohm coaxial cable (round)

300-ohm twin-lead cable (ﬂat)

• Use one of the following two diagrams if you connect an outdoor antenna.

A: Using a VHF/UHF combination outdoor antenna

B: Using separate VHF and/or UHF outdoor antennas

• Connect the outdoor antenna cable lead-in to ANT (Antenna terminal) on the rear of the main unit.

F-type connector

75-ohm coaxial cable

LC-20S5U_E.indb 8 2005/12/15 11:18:36

Preparation (Continued)

Antenna Connection (Continued)

• A 75-ohm coaxial cable connector is built into the LCD TV set for easy hookup. When connecting the 75-ohm coaxial

cable to the LCD TV set, screw the 75-ohm cable to the ANT terminal.

• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are

scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.

This converter/descrambler is necessary for normal viewing of the scrambled channels. (Set your TV to channel 3

or 4, typically one of these channels is used. If this is unknown, consult your cable TV company.) For more speciﬁc

instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/

descrambler provided by your cable TV company is explained below.

Please note: An RF switch provided with two inputs (A and B) is required (not supplied).

“A” position on the RF switch (not supplied): You can view all unscrambled channels by using the TV’s channel keys.

“B” position on the RF switch (not supplied): You can view the scrambled channels via the converter/descrambler by

using the converter’s channel keys.

CABLE TV (CATV) CONNECTION

• Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet.

• Unplug the AC cord from the LCD TV set and wall outlet when LCD TV set is not to be used for a long period of time.

Power Connection

OUT

Cable TV line

Cable TV converter/

descrambler

(not supplied)

Two-set

signal

splitter

(not

supplied)

RF switch (not supplied)

• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.

AC INPUT terminal

(AC 110-240 V)

AC cord

POWER

Wall outlet

LC-20S5U_E_P07-13.indd 9 2005/12/21 13:04:54

POWER

INPUT

(

)

( )

VOL

(

)

(

)

Upper control panel

Speaker

OPC (Optical Picture

Control) sensor

Remote sensor

Headphone jack (

)

Plug the headphone mini-plug into the headphone jack located

on the front of the main unit.

OPC (Optical Picture Control) indicato

The OPC indicator lights up green when "OPC" is set to "ON".

(See page 20.)

POWER/WAKE UP TIMER indicator

POWER/WAKE UP TIMER indicator lights up green when the power is on,

and red when in the standby mode (the indicator will not light when the main

power is off), and orange when the wake up timer is set (the indicator will

light when in the standby mode).

Part Names of the Main Unit

Controls

• INPUT, CH (

)/( ), VOL (

–

)/(

) and MENU on the main unit have the same functions as the same buttons on the remote control.

Fundamentally, this operation manual provides a description based on operation using the remote control.

To change the vertical angle of the LCD TV

set, tilt the screen up to 2.5 degrees forward

or 10 degrees backward. Please adjust

the angle so that the LCD TV set can be

watched most comfortably.

Tilt the display by grabbing onto the

carrying handle while securely holding

down the stand with your other hand.

How to adjust the angle

Listening with Headphones

■

Plug the headphone mini-plug into the headphone jack located on the front of the main unit.

• Headphones are not included in the supplied accessories.

• No sound is heard from the main unit speakers when a headphone mini-plug is connected into the headphone jack.

• Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.

▼

On-screen display

VOLUME

Headphones

Adjust the sound volume using VOL (

)/(

–

) on the

remote control.

LC-20S5U_E_P07-13.indd 10 2005/12/21 16:55:12

Part Names of the Main Unit (Continued)

Terminals

Carrying handle

Rear View

Round lock for

Kensington Security

Standard slot*

* Using the Kensington Lock

• This LCD TV set has a Kensington Security

Standard slot for use with a Kensington

MicroSaver Security System. Refer to the

information that came with the system for

instructions on how to use it to secure the

LCD TV set.

ANT. (Antenna terminal)

AUDIO (R)

AUDIO (R

)

AUDIO (L

)

AUDIO (R

)

AUDIO (L

)

AUDIO (L

)

VIDEO

S-VIDEO

INPUT3/OUTPUT

INPUT1

(COMPONENT

)

INPUT2

AC INPUT

terminal

How to Fix the Cables

Cable clamp

Secure cables and cords with the supplied cable clamp so that they do not get caught when mounting the cover.

LC-20S5U_E_P07-13.indd 11 2005/12/21 10:25:42

Part Names of the Remote Control

POWER (P. 16)

Switches the Liquid Crystal

levision power on or standby.

Channel Select (P. 18)

Sets the channel.

MTS (P. 17)

Selects audio settings.

MUTE (P. 17)

Mutes the sound.

AUDIO ONLY (P. 32)

Outputs audio without screen image.

VOL ( )/( ) (P. 17)

Sets the volume.

AV MODE (P. 20)

Selects preferred AV MODE.

MENU RETURN (P. 18)

Returns to the previous screen.

SLEEP (P. 33)

Sets the sleep timer.

VIEW MODE (P. 31)

Selects the screen size.

CH ( )/( ) (P. 18

)

Selects a channel.

INPUT (P. 17

)

Switches the input source between

INPUT1, INPUT2, INPUT3 and TV

mode.

FLASHBACK (P. 18

)

Returns to the previous channel.

DISPLAY (P. 16)

Displays the receiving channel and

the current time for 10 seconds.

ENTER

Executes a command.

/ / / (Cursor control) (P. 18)

Selects a desired item on the screen.

MENU (P. 18

)

Displays the menu screen.

CC (P. 30

)

Displays Closed Caption subtitles.

BACKLIGHT (P. 21

)

Adjusts the brightness of the screen.

TV Signals in Your Region

This product is factory set to comply with the TV broadcasting system in the United States. For Brazil, Argentina and Uruguay,

set the color system according to the country before using this product by following the table below.

The VIDEO INPUT mode is compatible with color systems worldwide and is automatically set.

Country

TV broadcasting

system

Factory setting of color system User setting

TV Video TV

U.S.A.

Color: NTSC

TV ch: US ch

NTSC (N358)

US ch

World Multi

Auto System

Not required or N/A

Canada, Mexico,

Latin America

Color: NTSC

TV ch: US ch

NTSC (N358)

US ch

World Multi

Auto System

Not required or N/A

Brazil

Color: PAL-M

TV ch: US ch

NTSC (N358)

US ch

World Multi

Auto System

Set color system to

PAL-M

(see page 25)

Argentina,

Uruguay

Color: PAL-N

TV ch: US ch

NTSC (N358)

US ch

World Multi

Auto System

Set color system to

PAL-

N (see page 25)

The World Multi Auto System

is compatible with all color

systems indicated below.

N358

N443

PAL

PAL-M

PAL-N

SECAM

PAL-60

The 3 Dimensional Y/C separation circuit* works only in the following cases:

• the color system is set to N358 in TV mode or Video mode

• the color system is set to AUTO (N358 signal is received) in Video mode

* The 3 Dimensional Y/C separation circuit is used to remove ﬂickering and color bleeding.

* The 3 Dimensional Y/C separation circuit does not function when S-VIDEO signals are input.

LC-20S5U_E.indb 12 2005/12/15 11:18:46

TIME DISPLAY

You can display the current time on the screen.

Repeat steps 1 to 3 of AUTO CLOCK Setting on page

15.

Press

to select “TIME DISPLAY”, and press

ENTER

S E T

T I M E D I S P L A Y O N

O F F

Press

to select “ON” or “OFF”, and press

ENTER

Press MENU to exit.

• When you press DISPLAY, the current time is displayed for about

10 seconds.

Daylight Saving Time (DST) Adjustment

The Daylight Saving-Time changes as shown below. Set the

DST to “ON” to forward the clock by 1 hour. To rewind the

clock by 1 hour, set the DST to “OFF”.

(Spring)

On the ﬁrst Sunday in April DST starts.

1:00AM 2:00AM

3:00AM 4:00AM

(Autumn)

On the last Sunday in October DST ﬁnishes.

1:00AM 2:00AM

Turning On and Off the Main Power

POWER

POWER/WAKE UP TIMER indicator

●

Press POWER. The POWER/WAKE UP TIMER indicator

instantly changes from red to green and the LCD TV set

is turned on.

On-screen display

STEREO

SAP

MONO

• The on-screen display disappears in a few seconds.

●

To turn off the main power, press POWER again.

Standby

To turn off the LCD TV set

Press POWER. The POWER/WAKE UP TIMER indicator

will turn red.

To turn the LCD TV set back on

Press POWER again. The POWER/WAKE UP TIMER

indicator will turn green.

Basic Operation

Advances 1 hour.

Rewinds 1 hour.

Selected item Description

ON Displays the current time on the screen.

OFF No display

LC-20S5U_E.indb 16 2005/12/15 11:19:01

Sharp LC-20S5U Operation Manual Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info