13277
1
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
LC-20B4U
LIQUID CRYSTAL TELEVISION
OPERATION MANUAL
ENGLISH
ENGLISH
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrow-
head symbol, within an equilat-
eral triangle, is intended to alert
the user to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within a
triangle is intended to alert the
user to the presence of impor-
tant operating and maintenance
(servicing) instructions in the
literature accompanying the
product.
IMPORTANT:
To aid reporting in case of loss or theft, please
record the TV’s model and serial numbers in the
space provided. The numbers are located at the
rear of the TV.
U.S.A. ONLY
Model No.:
Serial No.:
LC-20B4U(E)-a 03.2.26, 3:24 PM1
2
IMPORTANT INFORMATION (Continued)
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment
not expressly approved by the manufacturer could void the user’s authority to operate this equipment.
“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40
of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
U.S.A. ONLY
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury.
Disposal of these materials may be regulated due to environmental considerations. For disposal or
recycling information, please contact your local authorities or the Electronic Industries Alliance:
www.eia.org
LC-20B4U(E)-a 03.2.26, 3:24 PM2
3
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety
and many years of trouble-free operation of your product, please read the Important
Safety Precautions carefully before using this product.
IMPORTANT SAFETY PRECAUTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property
damage if improperly handled. This product has been engineered and manufactured with the highest
priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent
potential danger, please observe the following instructions when installing, operating and cleaning the
product. To ensure your safety and prolong the service life of your LCD color TV product, please read
the following precautions carefully before using the product.
Read instructions—All operating instructions must be read and understood before the product is
operated.
Keep this manual in a safe place—These safety and operating instructions must be kept in a
safe place for future reference.
Observe warnings—All warnings on the product and in the instructions must be observed
closely.
Follow instructions—All operating instructions must be followed.
Attachments—Do not use attachments not recommended by the manufacturer. Use of inad-
equate attachments can result in accidents.
Power source—This product must operate on a power source specified on the specification
label. If you are not sure of the type of power supply used in your home, consult your dealer or
local power company. For units designed to operate on batteries or another power source, refer
to the operating instructions.
Power cord protection—The power cords must be routed properly to prevent people from
stepping on them or objects from resting on them. Check the cords at the plugs and product.
If the AC adapter is misplaced or needs to be replaced, obtain the same type of adapter from a
SHARP service center or your dealer.
Overloading—Do not overload AC outlets or extension cords.
Overloading can cause fire or electric shock.
Entering of objects and liquids—Never insert an object into the product through vents or open-
ings. High voltage flows in the product, and inserting an object can cause electric shock and/or
short internal parts. For the same reason, do not spill water or liquid on the product.
Servicing—Do not attempt to service the product yourself. Removing covers can expose you to
high voltage and other dangerous conditions. Request a qualified service person to perform
servicing.
Repair—If any of the following conditions occurs, unplug the power cord from the AC outlet, and
request a qualified service person to perform repairs.
a.When the power cord or plug is damaged.
b.When a liquid was spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d.When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper
adjustment of controls not described in the instructions can cause damage, which often
requires extensive adjustment work by a qualified technician.
e.When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality in the product
indicates that the product needs servicing.
Replacement parts—In case the product needs replacement parts, make sure that the service
person uses replacement parts specified by the manufacturer, or those with the same character-
istics and performance as the original parts. Use of unauthorized parts can result in fire, electric
shock and/or other danger.
Safety checks—Upon completion of service or repair work, request the service technician to
perform safety checks to ensure that the product is in proper operating condition.
Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the
product according to the method recommended by the manufacturer.
Polarization—This AC adapter may be equipped with a polarized alternating current line plug (a
plug having one blade wider than the other). This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
LC-20B4U(E)-a 03.2.26, 3:24 PM3
4
The Liquid Crystal panel is a very high technology product with 921,600 thin film transistors, giving
you fine picture details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.
Please note that this does not affect the performance of your product.
IMPORTANT SAFETY PRECAUTIONS (Continued)
Cleaning—Unplug the power cord from the AC outlet before
cleaning the product. Use a damp cloth to clean the product.
Do not use liquid cleaners or aerosol cleaners.
Water and moisture—Do not use the product near water,
such as bathtub, washbasin, kitchen sink and laundry tub,
swimming pool and in a wet basement.
Stand—Do not place the product on an unstable cart, stand,
tripod or table. Placing the product on an unstable base can
cause the product to fall, resulting in serious personal
injuries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the manu-
facturer or sold with the product. When mounting the product
on a wall, be sure to follow the manufacturer’s instructions.
Use only the mounting hardware recommended by the
manufacturer.
When relocating the product placed on a cart, it must be
moved with utmost care. Sudden stops, excessive force and
uneven floor surface can cause the product to fall from the
cart.
Ventilation—The vents and other openings in the cabinet are
designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause over-
heating and/or shorten the life of the product. Do not place
the product on a bed, sofa, rug or other similar surface,
since they can block ventilation openings. This product is not
designed for built-in installation; do not place the product in
an enclosed place such as a bookcase or rack, unless
proper ventilation is provided or the manufacturer’s instruc-
tions are followed.
The Liquid Crystal panel used in this product is made of
glass. Therefore, it can break when the product is dropped
or applied with impact. Be careful not to be injured by broken
glass pieces in case the Liquid Crystal panel breaks.
Heat sources—Keep the product away from heat sources
such as radiators, heaters, stoves and other heat-generating
products (including amplifiers).
LC-20B4U(E)-a 03.2.26, 3:24 PM4
5
IMPORTANT SAFETY PRECAUTIONS (Continued)
If an outside antenna is connected to the television equipment, be sure the antenna system is
grounded so as to provide some protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code provides information with respect to proper grounding
of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna-discharge unit, connection to grounding elec-
trodes, and requirements for the grounding electrode.
Power Lines – An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be
fatal.
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(
NEC ART 250, PART H
)
ELECTRIC
SERVICE
EQUIPMENT
NECNATIONAL ELECTRICAL CODE
GROUND
CLAMP
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
Lighting For added protection for this television equipment
during a lightning storm, or when it is left unattended and
unused for long period of time, unplug it from the wall outlet
and disconnect the antenna. This will prevent damage to the
equipment due to lightning and power-line surges.
LC-20B4U(E)-a 03.2.26, 3:24 PM5
6
CONTENTS
Page
IMPORTANT INFORMATION .......................................................................................................1, 2
DEAR SHARP CUSTOMER .............................................................................................................3
IMPORTANT SAFETY PRECAUTIONS ....................................................................................... 3-5
CONTENTS ....................................................................................................................................... 6
SUPPLIED ACCESSORIES ............................................................................................................. 7
PREPARATION ............................................................................................................................8-10
Using the Remote Control ......................................................................................................... 8
Batteries for the Remote Control .............................................................................................. 8
Antenna Connection .............................................................................................................9, 10
Power Connection .................................................................................................................... 10
DISPLAY AND CONTROL OVERVIEW .................................................................................. 11-13
Removing the Back Cover ....................................................................................................... 13
Listening with Headphones ..................................................................................................... 13
REMOTE CONTROL ...................................................................................................................... 14
EZ SETUP (WITH AUTO CLOCK SETTING) .......................................................................... 15, 16
EZ SETUP during the First Power On ..............................................................................15, 16
SETTING THE CLOCK ............................................................................................................. 17-19
AUTO CLOCK Setting .........................................................................................................17, 18
MANUAL CLOCK Setting ......................................................................................................... 19
BASIC OPERATION ................................................................................................................. 20-24
TV signals in your region ........................................................................................................ 20
Turning on POWER................................................................................................................... 21
Standby ...................................................................................................................................... 21
Switching TV/VIDEO [AV1/AV2/COMPONENT/TV] Modes ................................................... 22
Sound Volume ........................................................................................................................... 23
Changing Channels .................................................................................................................. 24
SELECTING MENU ITEMS ............................................................................................................25
Selecting Menu Items .............................................................................................................. 25
ADJUSTMENTS ........................................................................................................................ 26-43
Adjusting SLEEP TIMER Settings ........................................................................................... 26
Adjusting BRIGHTNESS Settings ........................................................................................... 27
Adjusting PICTURE FLIP Settings .......................................................................................... 28
Adjusting PRESET Settings .................................................................................................... 29
Adjusting LANGUAGE Settings .............................................................................................. 30
Adjusting VIDEO ADJUST Settings ..................................................................................31, 32
SET UP .................................................................................................................................33, 34
Adjusting BLUE SCREEN Settings ......................................................................................... 35
Adjusting CLOSED CAPTION Settings .................................................................................. 36
Adjusting V-CHIP Settings ..................................................................................................37-43
CONNECTING EXTERNAL DEVICES ..................................................................................... 44-46
Bundling Cables with Clamps ................................................................................................ 46
TROUBLESHOOTING ..............................................................................................................47, 48
SPECIFICATIONS........................................................................................................................... 49
DIMENSIONAL DRAWINGS .......................................................................................................... 50
CALLING FOR SERVICE ............................................................................................................... 51
LIMITED WARRANTY ..............................................................................................................51, 52
LC-20B4U(E)-a 03.2.26, 3:24 PM6
7
Make sure the following accessories are provided with the product.
SUPPLIED ACCESSORIES
AC CordAntenna Cable
AAA size (UM/SUM-4) Dry Battery (×2)
AC Adapter
UBATU0026GEZZ
QCNWG0003CEPA
UADP-0212CEZZ
TINS-A691WJZZ
Cable Clamp (×2)
ENGLISHFRANÇAISESPAÑOLPORTUGUÊS
QACCD3097CEPA
Operation Manual
Remote Control
RRMCGA152WJSA (LC-20B4US)
RRMCGA152WJSB (LC-20B4UB)
LHLDWA002WJSA
(LC-20B4US)
LHLDWA002WJSB
(LC-20B4UB)
UADP-0243CEPZ
LC-20B4U(E)-a 03.2.26, 3:24 PM7
8
PREPARATION
Batteries for the Remote Control
Before using the LCD TV set for the first time, install two (AAA size, UM/SUM-4) batteries (supplied).
When the batteries become depleted and the remote control fails to operate, replace the batteries with
new (AAA size, UM/SUM-4) batteries.
1 Open the battery
cover.
2 Insert two (AAA size, UM/
SUM-4) batteries.
3 Close the battery
cover.
Slide the cover while
pressing the (b) part.
Position the positive and
negative ends of the batteries
as indicated in the compart-
ment.
Caution!
Cautions regarding batteries
Improper use of batteries can result in chemical leakage and/or explosion. Be sure to follow the instruc-
tions below.
Place batteries with their terminals corresponding to the (+) and () as indicated in the compartment.
Different types of batteries have different characteristics. Do not mix batteries of different types.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new
battery and/or cause the old battery to leak chemicals.
Remove batteries when they become weak.
Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a
cloth.
The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
If the remote control will not be used for an extended period of time, remove the batteries from the
remote control.
Using the Remote Control
Use the remote control by pointing it towards the remote
control sensor window on the main unit. Objects between
the remote control and sensor window may prevent proper
operation.
Cautions regarding use of the remote control
Do not expose the remote control to shock.
In addition, do not expose the remote control to liquid, and
do not place in an area with high humidity.
Do not install or place the remote control under direct
sunlight. The heat may cause deformation of the unit.
The remote control may not work properly if the remote
control sensor window of the main unit is under direct
sunlight or strong lighting. In such case, change the angle of
the lighting or LCD TV set, or operate the remote control
closer to the remote control sensor window.
+
+
POWER SLEEP
Engage the claw on the
cover into the battery
housing and slide shut.
SLEEP indicator
POWER indicator
Remote control
sensor
LC-20B4U(E)-a 03.2.26, 3:24 PM8
9
V
O
L
C
H
M
E
N
UT
V
/V
ID
E
O
M
A
I
N
P
O
W
E
R
75-ohm
coaxial cable
300-ohm
twin-lead
VHF/UHF
antenna
VHF/UHF
antenna
300/75-ohm
adapter
(not supplied)
300-ohm
twin-lead
300-ohm
twin-lead
75-ohm
coaxial cable
OUT IN
VHF
antenna
UHF
antenna
Combiner
(not supplied)
or
or
ANT.
POW
ER
INPUT
DC13V
PREPARATION (Continued)
A. Combination VHF/UHF Antenna
OUTDOOR ANTENNA CONNECTION
Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna
B: Using separate VHF and/or UHF outdoor antennas
Connect the outdoor antenna cable lead-in to ANT. (Antenna terminal) on the rear of the TV set.
B. Separate VHF and/or
UHF Antennas
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
1. A 75-ohm system is generally a round cable with F-type
connector that can easily be attached to a terminal without
tools (not supplied).
2. A 300-ohm system is a flat twin-lead cable that can be
attached to a 75-ohm terminal through a 300-75-ohm
adapter (not supplied).
Antenna Connection
The antenna requirements for good color television reception are more important than those for black & white
television reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various antenna
systems.
ANT. (Antenna
terminal)
Antenna cable (supplied)
ANTENNAS
LC-20B4U(E)-a 03.2.26, 3:24 PM9
10
Power Connection
A
Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet.
Always turn the MAIN POWER switch of the LCD TV set to off when connecting the AC adapter.
Unplug the AC adapter from the product and power outlet when not using for a long period of time.
PREPARATION (Continued)
Antenna Connection (Continued)
Cable TV converter/
descrambler
(not supplied)
Two-set
signal
splitter
(not
supplied)
Cable TV Line
RF switch (not supplied)
OUT
IN
A
Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be
required.
V
O
L
C
H
M
E
N
U
T
V
/
V
I
D
E
O
M
A
I
N
P
O
W
E
R
ANT.
POWER
INPUT
DC13V
A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75-
ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. terminal.
Some cable TV companies offer premium pay channels. Since the signals of these premium pay
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber
by the cable TV company. This converter/descrambler is necessary for normal viewing of the
scrambled channels. (Set your TV to channel 3 or 4, typically one of these channels is used. If this
is unknown, consult your cable TV company.) For more specific instructions on installing cable TV,
consult your cable TV company. One possible method of utilizing the converter/descrambler
provided by your cable TV company is explained below.
Please note: An RF switch provided with two inputs (A and B) is required (not supplied).
A position on the RF switch (not supplied): You can view all unscrambled channels by using the TVs
channel keys.
B position on the RF switch (not supplied): You can view the scrambled channels via the converter/
descrambler by using the converters channel keys.
CABLE TV (CATV) CONNECTION
Household power outlet
AC adapter
POWER INPUT
terminal (DC13V)
MAIN POWER
AC cord
LC-20B4U(E)-a 03.2.26, 3:24 PM10
11
CHVOL
MENU
TV/VIDEO MAIN POWER
A
TV/VIDEO, CH ( )/( ), VOL (–)/(+), and MENU on the main unit have the same functions as the same buttons
on the remote control. Basically, this operation manual provides a description based on operation with the remote
control.
DISPLAY AND CONTROL OVERVIEW
MAIN POWER
TV/VIDEO
MENU
CH ( )/( )
VOL (–)/(+)
Speaker (Right)
SLEEP indicator
The SLEEP indicator lights up red when the
SLEEP TIMER is set.
Upper control panel
To change the vertical
angle of the LCD TV set,
tilt the screen up to 5
degrees forward or 10
degrees backward. The
TV set can also be
rotated 50 degrees
horizontally. Adjust the
angle so that the TV set
can be watched most
comfortably.
Speaker (Left)
POWER indicator
A green indicator lights when the power is
on and a red indicator lights when in the
standby mode (the indicator will not light
when the main power is off).
Controls
Remote control sensor
LC-20B4U(E)-b 03.2.26, 3:25 PM11
12
VIDEO
AUDIO
L
Y
P
B
P
R
R
AUDIO
L
R
COMPONENT
AV-IN2/OUT
ANT.
VIDEO
S-VIDEO
AUDIO
L
R
HEAD
PHONE
POW
ER
INPUT
DC13V
AV-IN1
V
O
L
C
HM
E
N
U
T
V
/V
ID
E
O
M
A
IN
P
O
W
E
R
DISPLAY AND CONTROL OVERVIEW (Continued)
ANT. (Antenna terminal)
S-VIDEO
POWER INPUT
(DC13V)
PR
AUDIO (L)
PB
VIDEO
AUDIO (R)
AUDIO (L)
COMPONENT
AV-IN1
AUDIO (L)
AUDIO (R)
VIDEO
Y
AV-IN2/OUT
Carrying handle
Hold the carrying handle and tilt the
screen while steadying the stand with
your other hand.
Adjusting the screen view angle
Terminals
AUDIO (R)
HEADPHONE
LC-20B4U(E)-b 03.2.26, 3:25 PM12
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp LC-20B4U-S Operation Manual bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp LC-20B4U-S Operation Manual in de taal/talen: Engels als bijlage per email.

De handleiding is 5,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info