13259
33
Verklein
Vergroot
Pagina terug
1/39
Pagina verder
LC-13B8U
Printed in Japan
Imprimé au Japon
Impreso en Japón
Impresso no Japão
TINS-B779WJZZ
05P06-JA-MM
OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN MANUAL DE OPERAÇÃO
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA DE
CRISTAL LÍQUIDO
TELEVISOR DE CRISTAL
LÍQUIDO
LC-13B8U
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
MANUAL DE OPERAÇÃO
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
Products that have earned the ENERGY STAR
®
are designed to protect the environment
through superior energy efficiency.
Les produits agréés ENERGY STAR
®
sont conçus pour protéger l’environnement par un
rendement énergétique supérieur.
Printed on 100% post-consumer recycled paper.
Imprimé sur 100% de papier recyclé.
Impreso en 100% de papel reciclado de postconsumo.
Papel 100% Reciclado-Cuidado do Meio Ambiente.
LC13B8U_E_Hyo1234.p65 05.5.13, 9:21 AM1
1
LC-13B8U
OPERATION MANUAL
IMPORTANT:
To aid reporting in case of loss or theft, please record the
TV’s model and serial numbers in the space provided. The
numbers are located at the rear of the TV.
Model No.:
Serial No.:
ENGLISH
ENGLISH
U.S.A. ONLY
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrow-head symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within a triangle is
intended to alert the user to the presence of
important operating and maintenance (servic-
ing) instructions in the literature accompanying
the product.
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly
approved by the manufacturer could void the user’s authority to operate this equipment.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
U.S.A. ONLY
CAUTION:
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE.
THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO
THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED
BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER’S
INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES
RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD
BE MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE
THE PRODUCT AND CART COMBINATION TO OVERTURN.
“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National
Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical.”
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials
may be regulated due to environmental considerations. For disposal or recycling information, please contact your local
authorities or the Electronic Industries Alliance: www.eia.org
U.S.A. ONLY
2
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years
of trouble-free operation of your product, please read the Important Safety Precautions carefully before
using this product.
IMPORTANT SAFETY PRECAUTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if
improperly handled. This product has been engineered and manufactured with the highest priority on safety. However,
improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following
instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your
LCD color TV product, please read the following precautions carefully before using the product.
Read instructions—All operating instructions must be read and understood before the product is operated.
Keep this manual in a safe place—These safety and operating instructions must be kept in a safe place for future
reference.
Observe warnings—All warnings on the product and in the instructions must be observed closely.
Follow instructions—All operating instructions must be followed.
Attachments—Do not use attachments not recommended by the manufacturer. Use of inadequate attachments
can result in accidents.
Power source—This product must operate on a power source specified on the specification label. If you are not
sure of the type of power supply used in your home, consult your dealer or local power company. For units
designed to operate on batteries or another power source, refer to the operating instructions.
AC cord protection—The AC cord must be routed properly to prevent people from stepping on it or objects from
resting on it. Check the cord at the plugs and product.
Overloading—Do not overload AC outlets or extension cords.
Overloading can cause fire or electric shock.
Entering of objects and liquids—Never insert an object into the product through vents or openings. High voltage
flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same
reason, do not spill water or liquid on the product.
Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and
other dangerous conditions. Request a qualified service person to perform servicing.
Repair—If any of the following conditions occurs, unplug the AC cord from the AC outlet, and request a qualified
service person to perform repairs.
a.When the AC cord or plug is damaged.
b.When a liquid was spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d.When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper adjustment of
controls not described in the instructions can cause damage, which often requires extensive adjustment work by
a qualified technician.
e.When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the
product needs servicing.
Replacement parts—In case the product needs replacement parts, make sure that the service person uses
replacement parts specified by the manufacturer, or those with the same characteristics and performance as the
original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.
Safety checks—Upon completion of service or repair work, request the service technician to perform safety checks
to ensure that the product is in proper operating condition.
Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according
to the method recommended by the manufacturer.
Polarization—This AC cord may be equipped with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
3
IMPORTANT SAFETY PRECAUTIONS (Continued)
The Liquid Crystal panel is a very high technology product with 921,600 thin film transistors, giving you fine picture
details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.
Please note that this does not affect the performance of your product.
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product.
Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol
cleaners.
Water and moisture—Do not use the product near water, such as bathtub,
washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement.
Stand—Do not place the product on an unstable cart, stand, tripod or table.
Placing the product on an unstable base can cause the product to fall, resulting in
serious personal injuries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the manufacturer or sold with the
product. When mounting the product on a wall, be sure to follow the manufactur-
er’s instructions. Use only the mounting hardware recommended by the manufac-
turer.
When relocating the product placed on a cart, it must be moved with utmost care.
Sudden stops, excessive force and uneven floor surface can cause the product to
fall from the cart.
Ventilation—The vents and other openings in the cabinet are designed for
ventilation. Do not cover or block these vents and openings since insufficient
ventilation can cause overheating and/or shorten the life of the product. Do not
place the product on a bed, sofa, rug or other similar surface, since they can
block ventilation openings. This product is not designed for built-in installation; do
not place the product in an enclosed place such as a bookcase or rack, unless
proper ventilation is provided or the manufacturer’s instructions are followed.
The Liquid Crystal panel used in this product is made of glass. Therefore, it can
break when the product is dropped or applied with impact. Be careful not to be
injured by broken glass pieces in case the Liquid Crystal panel breaks.
Heat sources—Keep the product away from heat sources such as radiators,
heaters, stoves and other heat-generating products (including amplifiers).
4
If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to
provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical
Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection
to grounding electrodes, and requirements for the grounding electrode.
Power Lines – An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits
as contact with them might be fatal.
ANTENNA
LEAD-IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC
SERVICE
EQUIPMENT
NEC—NATIONAL ELECTRICAL CODE
GROUND
CLAMP
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
Lightning – For added protection for this television equipment during a lightning
storm, or when it is left unattended and unused for a long period of time, unplug
it from the wall outlet and disconnect the antenna. This will prevent damage to the
equipment due to lightning and power-line surges.
To prevent fire, never place any type of candle or flames on the top or near the
TV set.
To prevent fire or shock hazard, do not expose this product to dripping or splash-
ing. No objects filled with liquids, such as vases, should be placed on the product.
To prevent fire or shock hazard, do not place the AC cord under the TV set or
other heavy items.
IMPORTANT SAFETY PRECAUTIONS (Continued)
Do not display a still picture for a long time, as this could cause an afterimage to remain.
5
IMPORTANT INFORMATION ............................................ 1
DEAR SHARP CUSTOMER .............................................. 2
IMPORTANT SAFETY PRECAUTIONS ............................ 2
Supplied Accessories ...................................................... 5
Preparation ....................................................................... 6
Installing Batteries in the Remote Control ................... 6
Using the Remote Control ........................................... 6
Antenna Connection ................................................... 7
Power Connection ....................................................... 8
Part Names of the Main Unit ........................................... 9
Listening with Headphones......................................... 9
How to Fix the Cables ............................................... 10
Part Names of the Remote Control............................... 11
TV Signals in Your Region ............................................. 11
EZ SETUP (With AUTO CLOCK Setting) ...................... 12
EZ SETUP during the First Power On ........................ 12
Setting the CLOCK ......................................................... 13
AUTO CLOCK Setting ............................................... 13
MANUAL CLOCK Setting .......................................... 13
TIME DISPLAY ........................................................... 14
Basic Operation.............................................................. 14
Turning On and Off the Main Power .......................... 14
Standby ..................................................................... 14
Switching the Input Modes
(INPUT1/INPUT2/INPUT3/TV) ............................. 15
Sound Volume ........................................................... 15
Changing Channels .................................................. 16
Selecting Menu Items................................................ 16
Basic Adjustment Settings............................................ 18
AV MODE .................................................................. 18
OPC ........................................................................... 18
BACKLIGHT .............................................................. 19
PICTURE Adjustments .............................................. 19
COLOR TEMPERATURE ........................................... 20
AUDIO Adjustments .................................................. 20
Useful Features .............................................................. 21
CH-SETTING ............................................................. 21
SETUP ....................................................................... 22
V-CHIP Settings ......................................................... 23
CLOSED CAPTION ................................................... 27
VIEW MODE .............................................................. 28
AUDIO ONLY ............................................................. 28
BLUE SCREEN .......................................................... 28
SLEEP TIMER ............................................................ 29
WAKE-UP TIMER ....................................................... 29
NO SIGNAL OFF ....................................................... 30
NO OPERATION OFF ................................................ 30
PICTURE FLIP ........................................................... 30
Connecting External Devices........................................ 31
Example of External Devices that can be Connected
... 31
Outputting Video and Audio (Video Output) ............. 31
Connecting to the INPUT1/2/3 Terminals .................. 32
Troubleshooting ............................................................. 33
Specifications ................................................................. 34
Calling for Service.......................................................... 35
LIMITED WARRANTY ..................................................... 35
Dimensional Drawings
The dimensional drawings for the LCD TV set are shown on
the inside back cover.
Make sure the following accessories are provided with the LCD TV set.
Supplied Accessories
Wireless remote control AC cord
Contents
Operation manual“AAA” size batteries (×2)
page 6
page 8
A
The AC cord enclosed in this product is for 110-125V. For using it on the 125-240V AC, please consult the following.
SHARP ELECTRONICS CORPORATION 6100 Blue Lagoon Drive, Suite 230, Miami, Florida 33126, U.S.A.
Cable clamp
page 10
pages 6 and 11
LC-13B8U
6
Installing Batteries in the Remote Control
Before using the LCD TV set for the first time, install the two “AAA” size batteries supplied in the remote control. When the
batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
1 Open the battery cover. 2 Insert two “AAA” size batteries. 3 Close the battery cover.
Place batteries with their
terminals corresponding
to the (+) and (–)
indications in the battery
compartment.
Caution!
Precautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
•Place batteries with their terminals corresponding to the (+) and (–) indications.
•Different types of batteries have different characteristics. Do not mix batteries of different types.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old
batteries to leak chemicals.
Remove batteries as soon as they are depleted. Chemicals that leak from batteries can cause a rash. If chemical
leakage is found, wipe it off with a cloth.
•The batteries supplied with the LCD TV set may have a shorter operating time due to storage conditions.
If the remote control is not to be used for a long period of time, remove the batteries from the remote control.
Preparation
Engaging the lower
claw with the remote
control, close the
cover.
Using the Remote Control
Use the remote control by pointing it towards the remote sensor
window of the main unit. Objects between the remote control and
sensor window may prevent proper operation.
Cautions regarding use of the remote control
Do not apply shock to the remote control. In addition, do not
expose the remote control to liquids, and do not place it in an area
with high humidity.
Do not install or place the remote control in direct sunlight. The
heat may cause deformation of the unit.
The remote control may not work properly if the remote sensor
window is in direct sunlight or strong lighting. In such a case,
change the angle of the lighting or main unit, or operate the
remote control closer to the remote sensor window.
Slide the cover while
pressing the (
) part.
Headphone jack
OPC indicator
POWER/WAKE UP TIMER
indicator
Remote sensor
OPC sensor
7
Preparation (Continued)
Antenna Connection
OUTDOOR ANTENNA CONNECTION
Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna
B: Using separate VHF and/or UHF outdoor antennas
Connect the outdoor antenna cable lead-in to ANT. (Antenna terminal) on the rear of the main unit.
1. A 75-ohm system is generally a round cable with F-type connector that can easily
be attached to a terminal without tools (not supplied).
2. A 300-ohm system is a flat “twin-lead” cable that can be attached to a 75-ohm
terminal through a 300/75-ohm adapter (not supplied).
The antenna requirements for good color television reception are more important than those for black & white television reception.
For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various antenna systems.
ANTENNAS
75-ohm
coaxial cable
300-ohm
twin-lead
VHF/UHF
antenna
VHF/UHF
antenna
300/75-ohm
adapter
(not supplied)
300-ohm
twin-lead
300-ohm
twin-lead
75-ohm
coaxial cable
OUT IN
VHF
antenna
UHF
antenna
Combiner
(not supplied)
or
or
A. Combination VHF/UHF antenna
B. Separate VHF and/or
UHF antennas
ANT.
(Antenna terminal)
Antenna cable
(commercially available)
F-type connector
75-ohm coaxial cable
When connecting the RF cable to the LCD TV set, do not tighten F-type
connector with tools.
If tools are used, it may cause damage to your LCD TV set.
(breaking of internal circuit, etc.)
F-type connector should be finger-tightened only.
NOTICE
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
8
Preparation (Continued)
A
Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.
Antenna Connection (Continued)
•A 75-ohm coaxial cable connector is built into the LCD TV set for easy hookup. When connecting the 75-ohm
coaxial cable to the LCD TV set, screw the 75-ohm cable to the ANT. terminal.
Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are
scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
This converter/descrambler is necessary for normal viewing of the scrambled channels. (Set your TV to channel 3
or 4, typically one of these channels is used. If this is unknown, consult your cable TV company.) For more specific
instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/
descrambler provided by your cable TV company is explained below.
Please note: An RF switch provided with two inputs (A and B) is required (not supplied).
“A” position on the RF switch (not supplied): You can view all unscrambled channels by using the TV’s channel keys.
“B” position on the RF switch (not supplied): You can view the scrambled channels via the converter/descrambler by
using the converter’s channel keys.
CABLE TV (CATV) CONNECTION
A
Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet.
Unplug the AC cord from the LCD TV set and wall outlet when LCD TV set is not to be used for a long period of time.
Power Connection
Cable TV converter/
descrambler
(not supplied)
Two-set
signal
splitter
(not
supplied)
Cable TV line
RF switch (not supplied)
OUT
IN
AC INPUT terminal
(AC 110-240 V)
AC cord
POWER
Wall outlet
Connect to the AC INPUT terminal of the LCD TV set using the AC cord (supplied).
9
VOL (Volume)
(–)/(+)
Part Names of the Main Unit
Controls
A
INPUT, CH ( )/( ), VOL (–)/(+) and MENU on the main unit have the same functions as the same buttons on the remote control.
Fundamentally, this operation manual provides a description based on operation using the remote control.
Headphone jack ( )
Plug the headphone mini-plug into the headphone
jack located on the front of the main unit.
OPC (Optical Picture Control)
sensor
Remote sensor
OPC (Optical Picture Control) indicator
The OPC indicator lights up green when “OPC” is
set to “ON”. (See page 18.)
POWER/WAKE UP TIMER indicator
POWER/WAKE UP TIMER indicator lights up green when the
power is on, and red when in the standby mode (the indicator will
not light when the main power is off), and orange when the wake-
up timer is set (the indicator will light when in the standby mode).
To change the vertical angle of the LCD TV
set, tilt the screen up to 2.5 degrees forward
or 10 degrees backward. Please adjust the
angle so that the LCD TV set can be watched
most comfortably.
POWER
Upper control panel
INPUT
MENU
CH (Channel) ( )/( )
Speaker
Tilt the display by grabbing onto the
carrying handle while securely holding
down the stand with your other hand.
How to adjust the angle
Listening with Headphones
Plug the headphone mini-plug into the headphone jack located on the front of the main unit.
A
Headphones are not included in the supplied accessories.
No sound is heard from the main unit speakers when a headphone mini-plug is connected into the headphone jack.
Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
On-screen display
20
VOLUME
Adjust the sound volume
using VOL (+)/() on the
remote control.
Headphones
Speaker
10
Part Names of Main Unit (Continued)
Terminals
Carrying handle
Rear View
Y
P
B
P
R
AUDIO (L)
AUDIO (R)
S-VIDEO
VIDEO
AUDIO (L)
AUDIO (R)
INPUT1
(COMPONENT)
ANT.
(Antenna terminal)
AC INPUT
(AC 110-240 V)
INPUT2
AUDIO (L)
AUDIO (R)
VIDEO
INPUT3/
OUTPUT
Round lock for
Kensington Security
Standard slot*
How to Fix the Cables
Secure cables and cords with the supplied cable clamp so that they do not get caught when mounting the cover.
Cable clamp
Pull down the hook
to open the cover.
* Using the Kensington Lock
This LCD TV set has a Kensington
Security Standard slot for use with
a Kensington MicroSaver Security
System. Refer to the information
that came with the system for
instructions on how to use it to
secure the LCD TV set.
11
Part Names of the Remote Control
DISPLAY
Displays the receiving channel and
the current time for 10 seconds.
AV MODE (p. 18)
Selects preferred AV MODE.
BACKLIGHT (p. 19)
Adjusts the brightness of the screen.
' / " / \/ | (Cursor control)
(p. 16)
Selects a desired item on the screen.
MENU (p. 16)
Displays the menu screen.
INPUT (p. 15)
Switches the input source between
INPUT1, INPUT2, INPUT3 and TV
mode.
CC (p. 27)
Displays Closed Caption subtitles.
FLASHBACK (p. 16)
Returns to the previous channel.
CH (
)/( ) (p. 16)
Selects a channel.
Channel Select (p. 16)
Sets the channel.
POWER (p. 14)
Switches the Liquid Crystal
Television power on or standby.
PIC.FLIP (p. 30)
Sets the orientation of the picture.
SLEEP (p. 29)
Sets the sleep timer.
MENU RETURN (p. 16)
Returns to the previous screen.
ENTER
Executes a command.
MUTE (p. 15)
Mutes the sound.
AUDIO ONLY (p. 28)
Outputs audio without screen image.
VOL (+)/(–) (p. 15)
Sets the volume.
MTS (p. 15)
Selects audio settings.
TV Signals in Your Region
This product is factory set to comply with the TV broadcasting system in the United States. For Brazil, Argentina and Uruguay,
set the color system according to the country before using this product by following the table below.
The VIDEO INPUT mode is compatible with color systems worldwide and is automatically set.
U.S.A.
Color: NTSC NTSC (N358) World Multi
TV ch: US ch US ch Auto System
Not required or N/A
Canada, Mexico, Color: NTSC NTSC (N358) World Multi
Latin America TV ch: US ch US ch Auto System
Not required or N/A
Brazil
Color: PAL-M NTSC (N358) World Multi Set color system to
TV ch: US ch US ch Auto System PAL-M (see page 22)
Argentina, Color: PAL-N NTSC (N358) World Multi Set color system to
Uruguay TV ch: US ch US ch Auto System PAL-N (see page 22)
TV broadcasting
system
Factory setting of color system User setting
TV Video TV
Country
The World Multi Auto System
is compatible with all color
systems indicated below.
1 N358
2 N443
3 PAL
4 PAL-M
5 PAL-N
6 SECAM
7 PAL-60
12
Press POWER on the upper side of the main unit, to
turn on the TV. The SELECT LANGUAGE screen will
be displayed.
Press '/" to select “ENGLISH”, “ESPAÑOL”
(Spanish) or “FRANÇAIS” (French).
ENGLISH
ESPAÑ OL
FRANÇ AIS
Press ENTER to access CH-SETTING mode.
Press '/" to select “ON” or “OFF”. When you select
“ON”, the LCD TV set will automatically memorize the
broadcasting channels.
ON
OFF
A
If you select “OFF”, EZ SETUP will be canceled.
Press ENTER to access AUTO CLOCK mode.
Press '/" to select “ON” or “OFF”.
When you select “ON”, the LCD TV set will
automatically adjust the clock to search time-signals
(EDS signals), which are provided by some TV stations.
The AUTO CLOCK setting may take from several
minutes to an hour depending on the number of
channels to receive and signal status. If you know the
channel of the EDS signal carrier (PBS or other) in your
area, select “OFF” and follow the procedure in AUTO
CLOCK Setting. (See page 13.)
ON
OFF
EZ SETUP (With AUTO CLOCK Setting)
EZ SETUP during the First Power On
When you turn on the LCD TV set for the first time, it will
automatically memorize the broadcasting channels and
clock.
Please perform the following instructions before you press
POWER.
(1)
Insert the batteries into the remote control. (See page 6.)
(2)
Connect the antenna cable to the LCD TV set. (See page 7.)
(3) Connect the AC cord to the AC INPUT terminal of the
LCD TV set and plug in the AC cord to the wall outlet.
(See page 8.)
POWER
1
2
3
Press ENTER to access START EZ SETUP mode.
Press '/" to select “YES”, and press ENTER.
A
If you want to stop the EZ SETUP process once it has
started, press MENU and it will be canceled. If you want to
set up again, please refer to CH-SETTING on page 21.
YES
NO
CONNECT ANTENNA
OR CABLE.
The tuner will automatically search for the broadcasting
and cable TV channels. (The channel number will
automatically increase when it appears.)
PLEASE WAIT
AUTO PROGRAMMING
The LCD TV set will automatically switch to searching
for EDS signals.
If EDS signals are received, the channel number and time will
be displayed, and then the screen shown in step 5 appears.
PLEASE WAIT
NOW SEARCHING TIME
Once EZ SETUP is completed, the lowest channel
number memorized will be displayed.
STEREO
SAP
MONO 11:53AM
2
A
Do not let the EZ SETUP screen remain unattended for a long time.
If EZ SETUP does not memorize all the channels in your region,
please refer to page 21 for more information on manually memo-
rizing the channels using CH-SETTING.
It may be difficult to preset when the broadcasting signals are
weak, the channel cycle frequency is incorrect or the frequency
jamming is occurring around the area. Please refer to page 21 for
more information on manually memorizing channels using
CH-SETTING.
If there are no channels with EDS signals or the antenna signal is
weak, the AUTO CLOCK setting may not operate. In this case, the
“EDS CH IS NOT AVAILABLE.” message will appear and the
mode will change to MANUAL CLOCK setting. Refer to page 13 to
set the clock manually.
4
5
13
Setting the CLOCK
AUTO CLOCK Setting
There are two methods of setting the clock: AUTO CLOCK
and MANUAL CLOCK. AUTO CLOCK uses EDS signals,
which are provided by some TV stations, to automatically
adjust the clock. MANUAL CLOCK sets the clock manually in
areas where no channel carries EDS signals.
Press MENU to display the Menu screen.
Press \/| to select “SETUP”.
Press '/" to select “CLOCK”, and press ENTER.
SETUP
OPTION
CH SETTING
MTS
CLOCK
INPUT3 SELECT
V CHIP BLOCK
CLOSED CAPTION
COLOR SYSTEM
LANGUAGE
Press '/" to select “SET”, and press ENTER.
SET
TIME DISPLAY AUTO
MANUAL
Press '/" to select “AUTO”, and press ENTER.
If you do not know the channel that carries EDS signals in your
area, set “EDS CH” to “AUTO” and press ENTER. If you know the
channel of the EDS signal carrier in your area, press \/| to select
the channel and press ENTER.
SET
TIME DISPLAY EDS CH AUTO
When set to “AUTO CLOCK”, the current time is acquired
automatically when the main power is turned OFF. (This function
will not work when EDS CH is not set.)
Backup
The clock function is maintained for about 5 minutes even
when the AC cord has been shut off due to a power outage
or when moving the LCD TV set. (Since about 30 minutes
are required to charge the backup power supply, it may not
be possible to maintain the clock function if the charging time
is excessively short.)
If the clock setting has been reset, repeat the procedures on
this page.
1
3
4
5
2
MANUAL CLOCK Setting
If there are no channels with EDS signals, set the clock
manually using MANUAL CLOCK.
Repeat steps 1 to 4 of AUTO CLOCK Setting.
Press '/" to select “MANUAL”, and press ENTER.
SET
TIME DISPLAY AUTO
MANUAL
Press '/" to select “DST”, and press \/| to select
“ON” or “OFF”.
Press '/" to select “TIME”, and press \/| to set the
time, and press ENTER.
12:00AM 11:59AM
11:59PM 12:00PM
Holding down \/| changes the setting at a high speed.
SET
TIME DISPLAY DST OFF
TIME 12: AM
00
Press MENU to exit.
A
•Make sure to press ENTER after adjusting the time. Otherwise,
the time will not be set.
When “DST” is set to “ON”, the time entered is forwarded by 1
hour.
Please be sure to set “DST” before setting “TIME”.
2
3
A
CLOCK:
The AUTO CLOCK setting may take from several minutes to an hour
depending on the number of channels to receive and signal status.
EDS CH < AUTO >:
If there are no channels with EDS signals or the antenna signal is
weak, the AUTO CLOCK Setting may not operate. In such a
case, the message “EDS CH IS NOT AVAILABLE.” appears, and
the CLOCK setting screen (in step 4 in AUTO CLOCK Setting) is
displayed. Refer to MANUAL CLOCK Setting to set the clock
manually.
EDS CH < Not AUTO >:
If the channel you have selected for “EDS CH” is wrong or the EDS
signal carrier is weak, or when there is no broadcast, the AUTO
CLOCK Setting may not operate. In such cases, the message
“EDS CH (XXX) EDS DATA IS NOT AVAILABLE.” appears, and
the CLOCK setting screen (in step 4 in AUTO CLOCK Setting) is
displayed as in the case with EDS CH < AUTO >. Follow step 4
and repeat the AUTO CLOCK Setting procedure.
If broadcasting channels are not memorized, EDS signals cannot
be received even when the “EDS CH” is set to “AUTO”. In this
case, try EZ SETUP again. (See page 21.)
4
1
14
TIME DISPLAY
You can display the current time on the screen.
Repeat steps 1 to 3 of AUTO CLOCK Setting on page
13.
Press '/" to select “TIME DISPLAY”, and press
ENTER.
SET
TIME DISPLAY ON
OFF
Press '/" to select “ON” or “OFF”, and press
ENTER.
Press MENU to exit.
A
When you press DISPLAY, the current time is displayed for about
10 seconds.
Selected item Description
ON Displays the current time on the screen.
OFF No display
1
(Autumn)
On the last Sunday in October DST finishes.
1:00AM 2:00AM
3:00AM 4:00AM
Advances 1 hour.
1:00AM 2:00AM
1:00AM 2:00AM
Rewinds 1 hour.
2
3
4
Daylight Saving Time (DST) Adjustment
The Daylight Saving-Time changes as shown below. Set the
DST to “ON” to forward the clock by 1 hour. To rewind the
clock by 1 hour, set the DST to “OFF”.
(Spring)
On the first Sunday in April DST starts.
Turning On and Off the Main Power
POWER/WAKE UP TIMER indicator
POWER
Press POWER. The POWER/WAKE UP TIMER indicator
instantly changes from red to green and the LCD TV set
is turned on.
On-screen display
STEREO
SAP
M
ONO
A
The on-screen display disappears in a few seconds.
To turn off the main power, press POWER again.
Standby
To turn off the LCD TV set
Press POWER. The POWER/WAKE UP TIMER indicator will
turn red.
To turn the LCD TV set back on
Press POWER again. The POWER/WAKE UP TIMER
indicator will turn green.
Basic Operation
15
Basic Operation (Continued)
Switching the Input Modes (INPUT1/
INPUT2/INPUT3/TV)
Turn on the power of the connected video equipment.
Press INPUT to select the applicable input source. The
screen changes in order of INPUT1, INPUT2, INPUT3
and TV mode each time INPUT is pressed.
A
INPUT1:
Used for video equipment connected to the COMPONENT input
terminals.
INPUT2:
Used for video equipment connected to the INPUT2 termi-
nals.
The S-video input terminal is additionally provided for the
INPUT2 terminal. If both the S-video terminal and normal
video terminals are connected with cables, the S-video input
terminal takes priority.
INPUT3/OUTPUT:
INPUT3 mode is used to adjust the preset settings and IN or
OUT can be selected. INPUT3 indication is not displayed
when OUT is selected. (For details on setting INPUT3
SELECT, see page 22.)
1
2
INPUT2 mode
INPUT2
INPUT3
INPUT3 mode
TV mode
2
INPUT1
480P
INPUT1 mode
Sound Volume
To adjust the volume
Press VOL (+) to increase the sound volume.
The bar indicator shifts right.
VOLUME
50
Press VOL (–) to decrease the sound volume.
The bar indicator shifts left.
VOLUME
10
To mute the sound
Press MUTE to temporarily turn off the sound.
The MUTE mark
is displayed for 4 seconds.
Press MUTE or VOL (+)/(–) to turn the sound back to the
previous level.
The mute function is automatically turned off when any of
the following buttons are pressed: POWER, MUTE,
VOL (+)/(–) or MTS.
VOLUME
10
A
When VOL (+)/(–) is pressed in the Mute mode, the sound turns
on and the volume indicator is displayed.
The Mute function is canceled when POWER is pressed.
To select MTS (Multichannel TV Sound)
Press MTS to display the MTS screen.
Press MTS to select the MTS settings.
STEREO: stereo audio
SAP: secondary audio program
MONO: monophonic audio
STEREO
<
ON A I R
<
ON A I R
SAP
M
ONO
A
“ON AIR” appears when a STEREO or SAP broadcast is being
aired.
1
2
16
Basic Operation (Continued)
Changing Channels
You can select channels using Channel Select or
CH ( )/( ).
This LCD TV set allows you to select up to 125 channels
(1 to 125). To select a channel, enter a 2- or 3-digit number.
Using Channel Select
When selecting the channel using Channel Select, complete
input of the channel number by holding down the button for
the last digit for a moment.
To select a 1- or 2-digit channel number (e.g., Channel 5):
Complete the following procedure within 4 seconds.
Press the
button. Press the button.
0–
5
A
When selecting a 1-digit channel number, do not fail to press the
button first.
To select a 3-digit channel number (e.g., Channel 115):
Complete the following procedure within 4 seconds.
Press the
button. Press the button.
1––
11
Press the button.
115
A
The 3-digit channel number can be selected only when the
receiving mode is set to “CABLE” in “CH-SETTING”. (For details
on setting the receiving mode, see page 21.)
Changing channels with CH ( )/( ) on the remote control
Air:
Press CH ( ) and the channels change in the order shown below:
2 3 . . . 68 69 2 3 . . .
Press CH ( ) and the channels change in the order shown below:
3 2 69 68 . . . 3 2 . . .
Cable: Press CH ( ) and the channels change in the order shown below:
1 2 3 . . . 125 1 2 3 . . .
Press CH ( ) and the channels change in the order shown below:
3 2 1 125 . . . 3 2 1 . . .
Using FLASHBACK
Press FLASHBACK to switch the currently tuned channel
to the previously tuned channel.
Press FLASHBACK again to switch back to the currently
tuned channel.
1
3
1 2
2
Selecting Menu Items
The menus can be used to adjust the various settings of the
LCD TV set. Select the desired menu item by following the
steps below. See the next page for each Menu screen.
A
The items displayed differ depending on the setting conditions.
The item selected is displayed in yellow.
Settings most recently adjusted will be saved in memory.
Using the remote control
Press MENU on the remote control to display the Menu
screen.
Press \/| to select the desired menu item.
The cursor moves left or right.
The cursor indicates the selected menu item.
Press '/" to select the desired item, and press \/|
to adjust the selected item.
For “AV MODE”, “OPC”, “ADVANCED” and “RESET”,
press ENTER to display the setting screen.
:
SELECT
ENTER
:
ENTER
RETURN
:
BACK
MENU
:
EXIT
MENU[
PICTURE
]
PICTURE
S
AUDIO SETUP OPTION
AV MODE [DYNAMIC]
OPC [OFF]
BACKLIGHT [
BRIGHT
]
CONTRAST [ 4 ]
BRIGHTNESS[ ] +
COLOR [+ 5] +
TINT [
TINT [
]
SHARPNESS [ ] +
ADVANCED
RESET
0
0
0
0
Press MENU RETURN to return to the previous screen,
or press MENU to exit.
1
2
3
4
Using the control panel of the main unit
You can also operate the menu with the control panel of the
main unit.
Button operations on the control panel correspond to the
ones on the remote control as shown below.
Control panel of the main unit
VOL (–)/(+): Cursor \/| on the remote control
CH (
)/( ): Cursor "/' on the remote control
MENU: MENU on the remote control
INPUT: ENTER on the remote control
17
Basic Operation (Continued)
Menu setting screens
For details on setting each menu item, refer to the page number indicated below.
A
The illustrations and on-screen displays in this manual are for explanation purposes and may vary slightly from the actual
appearance.
Depending on the setting condition, such as an input mode, it may not be possible to adjust or set some items. In such cases, a message
will be displayed on the menu setting screen.
PICTURE
Page
AV MODE ....................................................... 18
OPC ................................................................ 18
BACKLIGHT ................................................... 19
CONTRAST .................................................... 19
BRIGHTNESS ................................................ 19
COLOR ........................................................... 19
TINT ................................................................ 19
SHARPNESS .................................................. 19
ADVANCED .................................................... 20
RESET ............................................................ 19
Page
TREBLE .......................................................... 20
BASS .............................................................. 20
BALANCE ....................................................... 20
RESET ............................................................ 20
Page
CH-SETTING .................................................. 21
MTS ......................................................... 15, 22
CLOCK...................................................... 13, 14
INPUT3 SELECT ............................................ 22
V-CHIP BLOCK ......................................... 23-26
CLOSED CAPTION ........................................ 27
COLOR SYSTEM ..................................... 11, 22
LANGUAGE .............................................. 12, 22
Page
VIEW MODE ................................................... 28
AUDIO ONLY.................................................. 28
BLUE SCREEN .............................................. 28
SLEEP TIMER ................................................ 29
WAKE-UP TIMER........................................... 29
NO SIGNAL OFF ............................................ 30
NO OPERATION OFF .................................... 30
PICTURE FLIP ............................................... 30
AUDIO
SETUP
OPTION
0
MENU[
MENU[
AUDIO
]
PICTURE
AUDIO
SETUP
OPTION
TREBLE [ ] +
BASS [ ] +
BALANCE[ ]L R
RESET
0
0
0
MENU
MENU
[
SETUP
]
PICTURE
AUDIO
SETUP
OPTION
CH SETTING
MTS
CLOCK
INPUT3 SELECT
V CHIP BLOCK
CLOSED CAPTION
COLOR SYSTEM
LANGUAGE
MENU[
MENU[
OPTION
]
PICTURE
AUDIO
SETUP
OPTION
VIEW MODE
AUDIO ONLY
BLUE SCREEN
SLEEP TIMER
WAKE UP TIMER
NO SIGNAL OFF
ED CA NO OPERATION OFF
PICTURE FLIP
:
:
SELECT
ENTER
:
ENTER
RETURN
:
BACK
MENU
:
EXIT
MENU[
MENU[
PICTURE
]
PICTURE
S
AUDIO
SETUP
OPTION
AV MODE [DYNAMIC]
OPC [OFF]
BACKLIGHT [
BRIGHT
]
CONTRAST [ 4 ]
BRIGHTNESS[ ] +
COLOR [+ 5] +
TINT [
TINT [
]
SHARPNESS [ ] +
ADVANCED
RESET
0
0
0
0
The bar above is an operational guide for the remote
control. The bar will change in accordance with each
menu setting screen.
18
Basic Adjustment Settings
AV MODE
AV MODE gives you preset options to choose from, to best
match the image based on room-brightness and playback
software used.
Press MENU to display the Menu screen.
Press \/| to select “PICTURE”.
Press '/" to select “AV MODE”, and press ENTER.
Press '/" to select the desired setting, and press
ENTER.
STANDARD
DYNAMIC
DYNAMIC(FIXED)
MOVIE
GAME
Press MENU to exit.
A
You can select a different AV MODE item for each input mode.
(For example, select “STANDARD” for TV input and “DYNAMIC”
for VIDEO input.)
When “AV MODE” is set to “DYNAMIC (FIXED)”, “NO PICTURE
ADJUSTMENTS AVAILABLE IN [DYNAMIC (FIXED)].” is dis-
played and the items in the PICTURE screen (except “OPC” and
“ADVANCED”) cannot be set.
Directly setting the AV MODE
Press AV MODE.
Before the AV MODE display disappears, press
AV MODE again and select your desired setting.
Each time you press AV MODE, the mode changes
as shown below.
AV MODE [STANDARD]
AV MODE [DYNAMIC]
AV MODE [DYNAMIC (FIXED)]AV MODE [MOVIE]AV MODE [GAME]
Selected item
STANDARD
DYNAMIC
DYNAMIC (FIXED)
MOVIE
GAME
Description
Changing image settings to standard
values.
For a clear-cut image emphasizing
high contrast for sports viewing.
Changing image settings to factory
preset values. No adjustments are
allowed.
Controlling the contrast to enable
easier viewing of dark images.
Controlling the brightness of video
games and other images for easier
viewing.
2
4
5
1
2
1
3
OPC
Automatically adjusts the brightness of the screen.
Press MENU to display the Menu screen.
Press \/| to select “PICTURE”.
Press '/" to select “OPC”, and press ENTER.
Press '/" to select “ON” or “OFF”, and press ENTER.
ON
OFF
Press MENU to exit.
A
When setting to “ON”, the OPC indicator lights up green, senses
the surrounding light and automatically adjusts the backlight
brightness. Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
4
5
Selected item Description
ON Automatically adjusts the brightness
OFF No adjustment
2
1
3
19
Basic Adjustment Settings (Continued)
BACKLIGHT
You can adjust the brightness of the picture.
Press MENU to display the Menu screen.
Press \/| to select “PICTURE”.
Press '/" to select “BACKLIGHT”.
0
0
0
0
PICTURE
AUDIO
SETUP
OPTION
AV MODE [DYNAMIC]
AV MODE [DYNAMIC]
OPC [OFF]
BACKLIGHT [
BRIGHT
]
CONTRAST [ 4 ]
CONTRAST [ 4 ]
BRIGHTNESS[ ] +
COLOR [+ 5] +
TINT [
TINT [
]
]
SHARPNESS [ ] +
+
ADVANCED
RESET
Press \/| to adjust the item to the desired position.
Press MENU to exit.
A
“BACKLIGHT” cannot be adjusted while “OPC” is set to “ON”.
Directly setting the BACKLIGHT
Press BACKLIGHT to display the BACKLIGHT screen.
Press BACKLIGHT to change the setting.
OPC OFF
BACKLIGHT [VARIABLE]
OPC OFF
BACKLIGHT [BRIGHT]
OPC OFF
BACKLIGHT [NORMAL]
OPC OFF
BACKLIGHT [DARK]
OPC ON
BACKLIGHT [AUTO]
A
The BACKLIGHT screen automatically disappears in 3 seconds.
[BRIGHT]: Maximum brightness
[NORMAL]: Suitable for viewing in a well-lit area. Saves energy.
[DARK]: Sufficiently bright when viewing in dim areas.
[VARIABLE]: The brightness can be adjusted to suit your prefer-
ence using \/|.
[AUTO]: Screen brightness adjusts according to the ambient
light of the room to conserve power consumption.
The OPC indicator lights up green.
When set to “AUTO”, make sure no object obstructs the OPC
sensor, which could affect its ability to sense surrounding light.
1
2
3
4
5
1
2
PICTURE Adjustments
You can adjust the picture to your preference with the
following picture settings.
Press MENU to display the Menu screen.
Press \/| to select “PICTURE”.
Press '/" to select a specific adjustment item.
PICTURE
AUDIO
SETUP
OPTION
AV MODE [DYNAMIC]
OPC [OFF]
BACKLIGHT [
BRIGHT
]
CONTRAST [ 4
4
]
BRIGHTNESS[ ] +
COLOR [+ 5 ] +
TINT [
TINT [
]
SHARPNESS [ ] +
ADVANCED
RESET
0
0
0
0
Press \/| to adjust the item to the desired position.
Press MENU to exit.
A
Select “ADVANCED”, and press ENTER to set “COLOR TEMP.”.
See page 20.
When resetting all adjustment items (except for the items on the
“AV MODE”, “OPC” and “ADVANCED” menus) to factory preset
values, perform the following procedure.
1 Press '/" to select “RESET” in the PICTURE screen, and
press ENTER.
2 Press '/" to select “YES”, and press ENTER.
3
2
Selected item
BACKLIGHT
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
||
||
| button
The screen brightens
For more contrast
For more brightness
For more color intensity
Skin tones become
greenish
For more sharpness
\\
\\
\ button
The screen dims
For less contrast
For less brightness
For less color intensity
Skin tones become
purplish
For less sharpness
4
5
1
20
Basic Adjustment Settings (Continued)
COLOR TEMPERATURE
You can adjust the color temperature to give a better white
balance.
Press MENU to display the Menu screen.
Press \/| to select “PICTURE”.
Press '/" to select “ADVANCED”, and press ENTER.
PICTURE
AUDIO
SETUP
OPTION
AV MODE [DYNAMIC]
OPC [OFF]
BACKLIGHT [
BRIGHT
]
CONTRAST [ 4 ]
4 ]
BRIGHTNESS[ ] +
COLOR [+ 5 ] +
TINT [
TINT [
]
SHARPNESS [ ] +
ADVANCED
RESET
0
0
0
0
Press '/" to select “COLOR TEMP.”, and press
ENTER.
COLOR TEMP.
RED [ ] USER
GREEN [ ]
BLUE [ ] HIGH
RESET
MIDDLE
LOW
0
0
0
Press '/" to select the desired item, and press
ENTER.
Press MENU to exit.
*
When you select “USER”, the following items are adjustable.
A
When resetting the items in the “USER” setting to factory preset
values, perform the following procedure.
1 Press '/" to select “RESET” in the ADVANCED screen, and
press ENTER.
2 Press '/" to select “YES”, and press ENTER.
2
4
6
5
1
Selected item
USER
HIGH
MIDDLE
LOW
Description
Can set your desired color*
White with bluish tone
White with reddish tone
Selected item
RED
GREEN
BLUE
\\
\\
\ button
||
||
| button
Weaker red Stronger red
Weaker green Stronger green
Weaker blue Stronger blue
3
AUDIO Adjustments
You can adjust the sound quality to your preference with the
following settings.
Press MENU to display the Menu screen.
Press \/| to select “AUDIO”.
Press '/" to select a specific adjustment item.
AUDIO
SETUP
OPTION
TREBLE [ ] +
BASS [ ] +
BALANCE[ ]L R
RESET
0
0
0
Press \/| to adjust the item to the desired position.
Press MENU to exit.
A
The items on the AUDIO menu cannot be set when headphones
are not used and “INPUT3 SELECT” is set to “OUT VAO”.
When resetting all adjustment items to factory preset values,
perform the following procedure.
1 Press '/" to select “RESET” in the AUDIO screen, and press
ENTER.
2 Press '/" to select “YES”, and press ENTER.
3
1
2
Selected item
TREBLE
BASS
BALANCE
\\
\\
\ button
||
||
| button
For weaker treble For stronger treble
For weaker bass For stronger bass
Decrease audio from Decrease audio from
the right speaker the left speaker
4
5
21
CH-SETTING
EZ SETUP
When you move to an area with different broadcasting
signals, you may have to set the channel numbers and
the time with the EZ SETUP function. To activate EZ
SETUP, perform the following procedure.
1 Press ' /" to select “CH-SETTING” in the SETUP screen (see
page 17), and press ENTER.
2 Press '/" to select “EZ SETUP”, and press ENTER.
3 Press '/" to select “YES”, and press ENTER.
Refer to page 12 for more information on EZ SETUP.
Setting the AIR/CABLE
It is necessary to set the receiving mode to AIR or CABLE
channels to receive locally broadcast TV programs.
Press MENU to display the Menu screen.
Press \/| to select “SETUP”.
Press '/" to select “CH-SETTING”, and press ENTER.
Press '/" to select “AIR/CABLE”, and press ENTER.
Press
'/"
to select the desired setting, and press ENTER.
EZ SETUP
AIR/CABLE AIR
CH SEARCH
CH MEMORY CABLE
Press MENU to exit.
A
Receivable channels of the LCD TV set are:
AIR channels: CABLE channels:
VHF: 2 through 13. 1 (HRC and IRC)
UHF: 14 through 69. 2 through 125 (STD, HRC and IRC)
1
4
2
5
3
Useful Features
Saving broadcast TV channels in the memory
Press MENU to display the Menu screen.
Press \/| to select “SETUP”.
Press '/" to select “CH-SETTING”, and press ENTER.
Press '/" to select “CH SEARCH”, and press ENTER.
EZ SETUP
AIR/CABLE CABLE 1
CH SEARCH
CH MEMORY
Press ENTER. The tuner will search through all available
channels in your area and add them to the TV memory.
STEREO
SAP
MONO
2
A
To interrupt CH SEARCH, press MENU RETURN. CH SEARCH will
stop at the current channel and will not add any higher channels.
Adding weak or additional channels or erasing
unwanted channels from TV memory
Individual settings of programs can be adjusted.
Repeat steps 1 to 3 of Saving broadcast TV channels
in the memory.
Press '/" to select “CH MEMORY”, and press
ENTER.
EZ SETUP
AIR/CABLE CHANNEL AIR 2
CH SEARCH SKIP ON
CH MEMORY
Press '/" to move the cursor to “CHANNEL”, and use
\/| or Channel Select to select the desired channel to
be added or erased.
Press '/" to move the cursor to “SKIP”, and use \/|
to select “ON” or “OFF”.
Press MENU to exit.
A
If CH SEARCH is performed again, the previously memorized
channels will be lost.
4
2
5
3
1
4
5
1
2
3
22
Useful Features (Continued)
SETUP
Press MENU to display the Menu screen.
Press \/| to select “SETUP”.
Press
'/"
to select the desired item, and press ENTER.
SETUP
OPTION
CH SETTING
MTS
CLOCK
INPUT3 SELECT
V CHIP BLOCK
CLOSED CAPTION
COLOR SYSTEM
LANGUAGE
Press '/" to change the setting, and press ENTER.
Press MENU to exit.
1
3
Factory setting
[STEREO] Stereo audio
[IN]
INPUT3/OUTPUT terminals selected as input
terminals
[ENGLISH]
Setting options
[SAP] Secondary audio program
[MONO] Monophonic audio
[OUT FAO]
Line output is selected, output volume is fixed,
speaker output is available.
[OUT VAO]
Line output is selected, output volume is variable,
speaker output is mute.
[ESPAÑOL]
[FRANÇAIS]
Selected item
MTS
INPUT3 SELECT*
COLOR SYSTEM
LANGUAGE
TV mode: N358/PAL-M/PAL-N
INPUT mode
(INPUT2/INPUT3)
: N358/N443/PAL/PAL-M/PAL-N/SECAM/PAL60/AUTO
When the INPUT1 (COMPONENT) mode is selected
, this function cannot be set.
2
4
5
* “INPUT3 SELECT” cannot be set when “INPUT3” is selected in “WAKE-UP TIMER” in the OPTION menu.
AA
AA
A
For details about the following items, refer to each indicated page.
CH-SETTING ....................... Page 21
CLOCK ................................. Pages 13 and 14
V-CHIP BLOCK .................... Pages 23 to 26
CLOSED CAPTION ............. Page 27
TV mode:
The LCD TV set is factory set to comply with the color system in the United States (NTSC-N358).
For Brazil (PAL-M), Argentina (PAL-N) or Uruguay (PAL-N), adjust the color system before using the LCD TV set.
23
Useful Features (Continued)
V-CHIP Settings
V-CHIP
This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents children from watching
violent or sexual scenes that may be harmful.
Restriction of TV programs includes two ratings that contain information about the program: the MPAA (Motion Picture Association of
America) rating and the TV Parental Guidelines. The MPAA rating is restricted by age. TV Parental Guidelines are restricted by age and
content.
Since a TV program may use either the MPAA rating or the TV Guidelines, both should be adjusted for complete control.
MPAA rating
Example 1:
PG-13 in the age-based rating is
blocked, this will also
automatically block the higher
ratings R, NC-17 and X.
A
The MPAA rating is only age-based.
MPAA rating
Rating Description
G GENERAL AUDIENCES. All ages admitted.
PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.
PG-13 PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13.
R RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NC-17 NO ONE 17 AND UNDER ADMITTED.
XX is an older rating that is unified with NC-17 but may be encoded in the data of older movies.:
age-
based
Example 2:
R in the age-based rating is
blocked, this will also automatically
block the higher ratings NC-17 and
X.
content-based
FV V S L D
(Fantasy (Violence) (Sexual (Adult (Sexually
Violence) Situation) Language) Suggestive
Dialog)
TV-Y (All children)
TV-Y7 (Direct to Older Children)
TV-G (General Audience) X
TV-PG (Parental Guidance Suggested) ✕✕
TV-14 (Parents Strongly Cautioned) ✕✕
TV-MA (Mature Audience Only) ✕✕
TV parental guidelines
age-
based
: The content rating can be set, but this rating is not normally broadcast by TV stations.
: The content rating can be set.
TV parental guidelines
Example:
When TV-Y7 in the age-based rating is set to BLOCK, the higher ratings (TV-G, TV-PG, TV-14 and TV-MA) will also be blocked automatically. In
addition, D, L, S, V and FV in BLOCK CONTENT are automatically blocked unless you manually set BLOCK CONTENT.
A
Age-based ratings can be modified by the content-based ratings, but only in the combinations indicated by an in the table above.
Choosing a lower age-based rating blocks the higher age-based ratings regardless of content rating settings.
If you set TV-Y or TV-Y7 to BLOCK, BLOCK CONTENT will display all items.
Rating
24
Useful Features (Continued)
Canadian Rating Systems
The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission
(CRTC) policy on violence in television programing.
While violence is the most important content element to be rated, the structure developed takes into consideration
other program content like language, nudity, sexuality and mature themes.
When setting the V-CHIP on the Canadian system you can choose either the Canadian English ratings or the
Canadian French ratings.
Canadian English ratings
Canadian French ratings
Rating
age-based
C
C8e
G
PG
14e
18e
Children: Intended for younger children under the age of 8 years. Pays careful attention to
themes that could threaten their sense of security and well-being.
Children over 8 years old: Contains no portrayal of violence as the preferred, acceptable,
or only way to resolve conflict; nor encourage children to imitate dangerous acts which
they may see on the screen.
General: Considered acceptable for all age groups. Appropriate viewing for the entire
family, contains very little violence, physical, verbal or emotional.
Parental Guidance: Intended for a general audience, but may not be suitable for younger
children (under the age of 8) because it could contain controversial themes or issues.
Over 14 Years: Could contain themes where violence is one of the dominant elements of
the storyline, but it must be integral to the development of plot or character. Language
usage could be profane and nudity present within the context of the theme.
Adults: Intended for viewers 18 years and older and might contain depictions of violence,
which while related to the development of plot, character or themes, are intended for adult
viewing. Could contain graphic language and portrayals of sex and nudity.
Description
Rating
age-based
G
8 anse
13 anse
16 anse
18 anse
General: All ages and children, contains minimal direct violence, but may be integrated
into the plot in a humorous or unrealistic manner.
General but inadvisable for young children: May be viewed by a wide public audience, but
could contain scenes disturbing to children under 8 who cannot distinguish between
imaginary and real situations. Recommended for viewing with parent.
Over 13 years: Could contain scenes of frequent violent scenes and therefore
recommended for viewing with parent.
Over 16 years: Could contain frequent violent scenes and intense violence.
Over 18 years: Only for adult viewing. Could contain frequent violent scenes and extreme
violence.
Description
25
Useful Features (Continued)
Setting BLOCK CONTENT (TV GUIDELINES)
Repeat steps 1 to 4 of Setting V-CHIP.
Press '/" to select “TV GUIDELINES”, and press
ENTER.
Press '/" to select “BLOCK CONTENT”, and press
ENTER.
TV
TV
Y BLOCK
TV Y7 BLOCK
TV G BLOCK
TV PG BLOCK
TV 14 BLOCK
TV MA BLOCK
BLOCK CONTENT
[D L S V FV]
Press '/" to select the desired item, and press \/|
to select “BLOCK” or “–––––” (unblock).
Press MENU to exit.
V-CHIP Settings (Continued)
V-CHIP settings allow you to set MPAA rating, TV GUIDE-
LINES, Canadian English ratings and Canadian French ratings.
Setting V-CHIP
Press MENU to display the Menu screen.
Press \/| to select “SETUP”.
Press '/" to select “V-CHIP BLOCK”, and press ENTER.
“INPUT SECRET NO.” will be displayed. Input the 4-
digit secret number by using Channel Select.
A
When you input the secret number for the first time, press
ENTER to register. Otherwise, continue to step 5.
Press '/" to select the desired item, and press
ENTER.
MPAA
TV GUIDELINES
CAN.ENGLISH RATINGS
CAN.FRENCH RATINGS
STATUS
Press '/" to select the desired item, press \/| to
select “BLOCK”.
(MPAA rating) (TV GUIDELINES)
G
G
–––––
PG BLOCK
PG 13 BLOCK
R BLOCK
NC 17 BLOCK
X BLOCK
TV
TV
Y –––––
TV Y7 BLOCK
TV G BLOCK
TV PG BLOCK
TV 14 BLOCK
TV MA BLOCK
BLOCK CONTENT
[D L S V FV]
(Canadian English ratings) (Canadian French ratings)
C BLOCK
C8+ BLOCK
G BLOCK
PG BLOCK
14+ BLOCK
18+ BLOCK
G BLOCK
8 ans+ BLOCK
13 ans+ BLOCK
16 ans+ BLOCK
18 ans+ BLOCK
Press MENU to exit.
A
The setting automatically enters “BLOCK” for any ratings below
your selection.
1
2
3
5
4
6
7
1
4
5
3
2
26
Useful Features (Continued)
Changing V-CHIP BLOCK settings
Repeat steps 1 to 3 of Setting V-CHIP on page 25,
then “INPUT SECRET NO.” will be displayed.
Input the 4-digit secret number by using Channel
Select; the V-CHIP select mode will be displayed.
Set the V-CHIP BLOCK again.
MPAA
TV GUIDELINES
CAN.ENGLISH RATINGS
CAN.FRENCH RATINGS
STATUS
Changing or clearing the SECRET NUMBER
If you forget the secret number, clear the secret number
as follows.
Repeat steps 1 to 3 of Setting V-CHIP on page 25, or
1 and 2 of Canceling the V-CHIP BLOCK screen
while V-CHIP BLOCK is activated, then “INPUT
SECRET NO.” will be displayed.
Press and hold both CH (
) and VOL (+) on the main
unit simultaneously until the message “INPUT SECRET
NO.” blinks.
Press MENU to exit.
1
2
Upper control panel of the main unit
Activating V-CHIP BLOCK
Setting STATUS
You can activate V-CHIP BLOCK after setting V-CHIP.
Repeat steps 1 to 4 of Setting V-CHIP on page 25.
Press '/" to select “STATUS”, and press ENTER.
MPAA
TV GUIDELINES
CAN.ENGLISH RATINGS
CAN.FRENCH RATINGS
STATUS
Press '/" to select “ON”, and press ENTER.
ON
OFF
A
If “STATUS” is set to “OFF”, V-CHIP BLOCK will not be
activated.
Press MENU to exit.
Canceling the V-CHIP BLOCK screen while
V-CHIP BLOCK is activated
“V-CHIP HAS BEEN ACTIVATED” appears if you watch
a program with the same Program Rating data you
configured.
V CHIP HAS BEEN ACTIVATED
TV 14
DLSV
A
“V-CHIP HAS BEEN ACTIVATED” will not be displayed if
“STATUS” is set to “OFF”.
Press MENU to display “INPUT SECRET NO.”.
Input the 4-digit secret number by using Channel
Select; V-CHIP BLOCK is temporarily canceled. If you
input an incorrect secret number, “SECRET NO. IS
INCORRECT.” is displayed. In this case, input the
correct secret number.
1
2
4
3
1
2
1
VOL (+)
CH (
)
MENU
3
2
3
27
Useful Features (Continued)
CLOSED CAPTION
Setting CLOSED CAPTION
This LCD TV set is equipped with an internal Closed Caption
decoder. “Closed Caption” is a system which allows conversa-
tions, narration, and sound effects in TV programs and home
videos to be viewed as captions on the TV screen (see the
illustration).
Not all programs and videos will offer closed captioning. Please
look for the “ ” symbol to ensure that captions will be shown.
The Closed Caption broadcasts can be viewed in two modes:
CAPTION and TEXT. For each mode, two channels are
available: CH1 and CH2.
The CAPTION mode shows subscripts of dialogs and commen-
taries of TV dramas and news
programs while allowing a clear view
of the picture.
The TEXT mode displays various
information over the picture (such as
TV program schedules and weather
forecasts, etc.) that is independent of
the TV programs.
Press MENU to display the Menu screen.
Press \/| to select “SETUP”.
Press '/" to select “CLOSED CAPTION ”, and press
ENTER.
Press '/" to change the CLOSED CAPTION setting,
and press ENTER.
OFF
CC1
CC2
T1
T2
A
CC1: CLOSED CAPTION mode for CH1 data
CC2: CLOSED CAPTION mode for CH2 data
T1: TEXT mode for CH1 data
T2: TEXT mode for CH2 data
Press MENU to exit.
1
2
3
4
5
Directly setting the CLOSED CAPTION
Press CC to display the CC/TEXT screen.
CC/TEXT[OFF]
Press CC to change the setting.
CC/TEXT [OFF]
CC/TEXT [T2] CC/TEXT [T1]
CC/TEXT [CC1]
CC/TEXT [CC2]
A
CC1: CLOSED CAPTION mode for CH1 data
CC2: CLOSED CAPTION mode for CH2 data
T1: TEXT mode for CH1 data
T2: TEXT mode for CH2 data
A
If a broadcast contains Closed Caption data and MUTE is
pressed, the LCD TV set enters CLOSED CAPTION mode
automatically. Pressing MUTE again will return the LCD TV set
to its previous condition.
Closed Caption may malfunction (white blocks, strange charac-
ters, etc.) if signal conditions are poor or if there are problems at
the broadcast source. This does not necessarily indicate a
problem with the LCD TV set.
If any button is pressed to call up the on-screen display while
viewing a Closed Caption broadcast, the closed captions will
disappear momentarily.
If no TEXT broadcast is being received while viewing in the
TEXT mode, the screen may become blank for some programs.
Should this occur, switch the CLOSED CAPTION mode to
“OFF”.
If you select “CC1”, “CC2”, “T1” or “T2” (or MUTE is pressed)
while “VIEW MODE” is set to “ZOOM” or “STRETCH”, “VIEW
MODE” will be changed to “4:3” or “16:9” automatically.
2
1
28
Useful Features (Continued)
AUDIO ONLY
When listening to music from a music program, you can turn
the Liquid Crystal display off and enjoy audio only.
Setting the AUDIO ONLY on the Menu screen
Repeat steps 1 and 2 of VIEW MODE.
Press '/" to select “AUDIO ONLY”, and press ENTER.
Press '/" to select “ON”, and press ENTER.
ON
OFF
Directly setting the AUDIO ONLY
Press AUDIO ONLY. ‘PRESS “AUDIO ONLY” FOR
VIDEO OFF’ is displayed on the screen.
AUDIO ONLY [OFF]
PRESS"AUDIO ONLY"FOR VIDEO OFF
Press AUDIO ONLY again. The screen image will disappear.
Press AUDIO ONLY again. The screen image will be
displayed again.
VIEW MODE
You can select the picture display size for the playback image
of the DVD player from the following four modes: “4:3”, “16:9”,
“ZOOM” and “STRETCH”.
Press MENU to display the Menu screen.
Press \/| to select “OPTION”.
Press '/" to select “VIEW MODE”, and press ENTER.
Press '/" to select the desired setting, and press
ENTER.
4:3
16:9
ZOOM
STRETCH
Press MENU to exit.
A
The 4:3 image will be distorted on the screen when the “VIEW MODE
is set to “16:9”.
When “CLOSED CAPTION” is set to “CC1”, “CC2”, “T1” or “T2”,
“ZOOM” and “STRETCH” cannot be set for “VIEW MODE”.
You can select a different VIEW MODE item for each input mode
(INPUT1, INPUT2, INPUT3 and TV).
1
2
4
5
1
3
Selected item
ON
OFF
Description
Audio is output without screen image.
Both screen images and audio are output.
1
3
3
Description
Displays the image in a 4:3 size.
Stretches the image horizontally to display it in a
16:9 size.
Displays the center part of the image by enlarging
it in the horizontal and vertical directions.
Stretches the image horizontally.
Selected item
4:3
16:9
ZOOM
STRETCH
(For an image
stretched vertically
with bands at the left
and right sides)
(For an image
stretched vertically)
Image type 4:3 16:9 ZOOM STRETCH
(For a 4:3 image)
BLUE SCREEN
This function automatically turns the screen blue if no
broadcast signal or no input signal is received.
Repeat steps 1 and 2 of VIEW MODE.
Press '/" to select “BLUE SCREEN”, and press ENTER.
Press '/" to select “ON”, and press ENTER.
ON
OFF
Press MENU to exit.
A
When received signals are weak or interfered with by some other
signals, the BLUE SCREEN function may be activated. To watch
the TV under such conditions, set “BLUE SCREEN” to “OFF”.
2
2
1
3
2
4
29
Useful Features (Continued)
SLEEP TIMER
You can set the SLEEP TIMER to automatically turn off the TV.
1
2
POWER
Setting the SLEEP TIMER on the Menu screen
Press MENU to display the Menu screen.
Press \/| to select “OPTION”.
Press '/" to select “SLEEP TIMER”, and press
ENTER.
Press '/"/\/| to select “30MIN”, “60MIN”, “90MIN”,
“120MIN”, “150MIN” or “OFF”, and press ENTER.
3 MIN OFF
6 MIN
9 MIN
12 MIN
15 MIN
0
0
0
0
0
Press MENU to exit.
A
After you set the SLEEP TIMER, pressing POWER on the main
unit or POWER on the remote control will cancel the SLEEP
TIMER setting.
•5 minutes before the SLEEP TIMER turns off the LCD TV set,
“5MIN REMAINING” is displayed on the screen for 4 seconds.
The SLEEP TIMER counts down and shows a similar 4-second
display for each remaining minute until the timer turns off the LCD
TV set.
Directly setting the SLEEP TIMER
Press SLEEP to display the SLEEP TIMER screen.
SLEEP TIMER [OFF]
Press SLEEP to change the setting.
[OFF] [30MIN] [60MIN]
[90MIN][120MIN][150MIN]
(minutes)
A
The SLEEP TIMER screen automatically disappears in 3 seconds.
1
2
4
5
3
WAKE-UP TIMER
You can set the WAKE-UP TIMER to automatically turn on
the TV.
Repeat steps 1 and 2 of SLEEP TIMER.
Press '/" to select “WAKE-UP TIMER”, and press
ENTER.
Press '/" to select the items, and press \/| to
adjust them.
TIMER
OFF
TIME 7: AM
CHANNEL 1
VOLUME 2
0 0
0
Press MENU to exit.
Make sure to turn off the LCD TV set with the remote
control.
The WAKE-UP TIMER will not be activated if the LCD
TV is turned off with POWER on the main unit.
A
When you set “WAKE-UP TIMER”, the POWER/WAKE UP TIMER
indicator lights up orange while in the standby mode.
Be sure to adjust the clock with “CLOCK” in “SETUP” before
setting “SLEEP TIMER” and “WAKE-UP TIMER”.
You can output the picture and sound of the external device with
the WAKE-UP TIMER function. Make sure that the external device
turns on at the time you specified.
The CHANNEL setting for “WAKE-UP TIMER” changes in the
following order: INPUT1INPUT2INPUT3TV (AIR or CABLE)*
* The skipped channels cannot be selected.
When not using LCD TV set for a long period of time, either turn
the main power off or set “WAKE-UP TIMER” to “OFF”.
When “WAKE-UP TIMER” has been set to “ON”, the TV is turned
on at the set time every day until it is set to “OFF”.
After the TV has been turned “ON” by “WAKE-UP TIMER”, “SLEEP
TIMER” is automatically set to 120 minutes for safety reason.
The time that is currently set can be checked on the screen by
pressing DISPLAY.
When the time set for “WAKE-UP TIMER” is reached when the
power is on, the TV changes to the set channel. The volume does
not change at this time.
2
1
4
5
3
Description
To activate the WAKE-UP TIMER, set this item to
“ON”.
Set the time at which you want to turn on the TV.
Set the TV channel or input mode when the TV is
turned on.
Set the volume when the TV is turned on.
Selected item
TIMER
TIME
CHANNEL
VOLUME
30
Useful Features (Continued)
NO SIGNAL OFF
The NO SIGNAL OFF function allows you to save energy.
When set to “ENABLE”, the power will automatically shut
down if no signal inputs for 5 minutes.
Press MENU to display the Menu screen.
Press \/| to select “OPTION”.
Press '/" to select “NO SIGNAL OFF”, and press
ENTER.
Press '/" to select “ENABLE”, and press ENTER.
ENABLE
DISABLE
Press MENU to exit.
A
“DISABLE” is factory preset value.
This function can work only in TV mode.
If interfered with by other broadcast or radio waves, “NO SIGNAL
OFF” may not work properly even when the broadcast is over.
NO OPERATION OFF
When set to “ENABLE”, the power will automatically shut
down if there is no operation for 3 hours.
Repeat steps 1 and 2 of NO SIGNAL OFF.
Press '/" to select “NO OPERATION OFF”, and
press ENTER.
Press '/" to select “ENABLE”, and press ENTER.
ENABLE
DISABLE
•5 minutes before the power shuts down, remaining
time is displayed every minute.
Press MENU to exit.
A
“DISABLE” is factory preset value.
4
1
1
5
4
3
3
2
PICTURE FLIP
You can set the orientation of the picture.
Setting the PICTURE FLIP on the MENU screen
Repeat steps 1 and 2 of NO SIGNAL OFF.
Press '/" to select “PICTURE FLIP”, and press
ENTER.
Press '/" to select the desired mode, and press
ENTER.
NORMAL
MIRROR
ROTATE
ROTATE
UPSIDE DOWN
UPSIDE DOWN
Press MENU to exit.
Directly setting the PICTURE FLIP
Press PIC.FLIP to display the PICTURE FLIP screen.
Press PIC.FLIP to change the setting.
PICTURE FLIP [NORMAL]
PICTURE FLIP [UPSIDE DOWN]
PICTURE FLIP [MIRROR]
PICTURE FLIP [ROTATE]
2
2
1
3
4
2
1
[UPSIDE DOWN]
To display upside down
images for special uses.
[ROTATE]
To display rotated images
for special uses.
[MIRROR]
To display mirror images
for special uses.
[NORMAL]
Normal image orientation.
31
You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals located on the rear of
the main unit.
When connecting an external device, turn off the POWER of the main unit first to prevent any possible damage.
Connecting External Devices
ANote:
For the cable, use a commercially available audio/video cable.
Only connect audio/video signals to INPUT2 and INPUT3/OUTPUT terminals. Connecting other signals may result in a malfunction.
INPUT2 has 2 video input terminals: VIDEO and S-VIDEO. When you connect external devices to both terminals (and if you select
INPUT2), you can only view pictures from the S-VIDEO terminal. To view the picture from the VIDEO terminal, do not connect any
external device to the S-VIDEO terminal.
For more information about external device connections, see the manuals of your external devices.
Example of External Devices that can be Connected
Outputting Video and Audio (Video Output)
You can output video and audio signals from the LCD TV set through the INPUT3/OUTPUT terminal.
When using INPUT3/OUTPUT as an output terminal, select “SETUP” in the Menu screen and set “INPUT3 SELECT” to
“OUT”. (See page 22.)
The factory setting for “INPUT3 SELECT” is “IN”.
A
When using the S-VIDEO input for INPUT2, or COMPONENT input for INPUT1, no video signal will be made to the INPUT3/OUTPUT
terminal, but audio signal will be made for connection to external audio systems.
<Example>
• DVD Player, etc.
• Digital TV tuner
To INPUT1 terminal
* If your external device has a
component terminal, COMPONENT
connection is recommended
(you can view high-quality pictures).
To INPUT2 terminal
<Example>
• Camcorder
Home video game system
<Example>
• VCR
Laser disc player
Audio amplifier
To INPUT3/OUTPUT terminal
* If your external device has an S-video
terminal, S-VIDEO connection is
recommended.
32
Connecting External Devices (Continued)
Connecting to the INPUT1/2/3 Terminals
INPUT3/OUTPUT
terminal
INPUT2 terminal
Camcorder
VCR
Camcorder
VCR
Video
Audio (L)
Audio (R)
Audio/Video cable
(commercially available)
INPUT1 terminal
(COMPONENT)
DVD player
Audio (L)
Audio (R)
Y
P
B
P
R
Audio cable
(commercially available)
Component cable
(commercially available)
Video
Audio (L)
Audio (R)
S-Video
S-Video cable
(commercially available)
Audio/Video cable
(commercially available)
ANote:
If your VCR (or other external devices) has an S-video terminal, S-VIDEO connection is recommended. (Use an S-video cable.)
When you connect external devices to both S-VIDEO and VIDEO terminals (and if you select INPUT2), you can only view pictures from
the S-VIDEO terminal.
You cannot view multiple or synthesized pictures by connecting two or more external devices. When connecting an external device, use
care to connect the video and audio cables to the corresponding terminals.
Only when 480I, 480P, 576I, 576P, 720P or 1080I signal is received, picture can be displayed.
33
Troubleshooting
Before calling for repair services, make the following checks for possible remedies to the encountered symptoms.
LCD TV set
Problem Check item
Reference page
There is no
picture.
There is no
picture from
INPUT1/2/3.
8
15
14
Make sure the AC cord is properly inserted in the power
outlet.
Reception other than those of broadcasting stations can
be considered.
Make sure the input mode is set to TV.
Make sure the POWER switch of the main unit is on.
There is no
picture or
sound.
Make sure the BRIGHTNESS is properly adjusted.
Fluorescent lamp may have reached the end of service
life.
Make sure the S-VIDEO terminal has nothing connected.
Make sure the AUDIO ONLY is not set to ON.
There is no
sound.
Make sure the volume is not set to minimum.
Make sure the sound is not set to mute.
Make sure that headphones are not connected.
There is no
picture or
sound, just
noise.
Make sure the antenna cable is properly connected.
Bad reception could be the problem.
Picture is
not clear.
Make sure the antenna cable is properly connected.
Bad reception could be the problem.
Picture is
light or
improperly
tinted.
Check color adjustment.
Check COLOR SYSTEM setting.
The picture
is too dark.
Press the BACKLIGHT button or set the BACKLIGHT or
BRIGHTNESS settings.
Check CONTRAST and BRIGHTNESS adjustment.
Fluorescent lamp may have reached the end of service
life.
Remote control does not work.
Check the batteries of the remote control.
Make sure the remote sensor window is not in strong
lighting.
19
34
32
28
15
15
9
7, 8
7, 8
19, 20
22
19
19
34
6
6
The clock (AUTO CLOCK)
cannot be set.
The broadcasted EDS signal may be weak. Check the
antenna.
Carry out EZ SETUP or Setting the CLOCK again.
If EDS signal is not sent, set the clock using MANUAL
CLOCK Setting.
12, 13, 21
13
Sound
Picture
Picture
Unit cannot be operated.
External influences such as lightning, static electricity,
etc., may cause improper operation. In this case, operate
the unit after first turning the power off, or unplugging the
AC cord and re-plugging it in 1 or 2 minutes.
34
Troubleshooting (Continued)
Before calling for repair services, make the following checks for possible remedies to the encountered symptoms.
Antenna
Specifications
Items
LCD panel 13" Advanced Super View & BLACK TFT LCD
Number of dots 921,600 dots VGA
Video color systems N358, N443, PAL, PAL-M, PAL-N, SECAM, PAL-60
TV Standard (CCIR) NTSC/PAL-M/PAL-N
TV function
TV Tuning System PLL 181 ch.
STEREO MTS+SAP
CATV 125 ch.
Y/C FILTER 3-LINE COMB FILTER
Brightness 430 cd/m
2
Lamp life (Fluorescent lamp) 60,000 hours*
Viewing angles H: 170° V: 170°
Audio amplifier 2.1 W × 2
Speakers 1
37
/
64
× 2
3
/
4
in. (4 × 7 cm), 2 pcs.
INPUT1 AUDIO-IN, COMPONENT-IN
INPUT2 AUDIO-IN, VIDEO-IN, S-VIDEO-IN
Terminals INPUT3/OUTPUT AUDIO-IN, VIDEO-IN/AUDIO-OUT, VIDEO-OUT
Antenna F-Type
Headphone Mini-jack for stereo (ø3.5 mm)
OSD language English/Spanish/French
Power supply AC 110-240V, 50/60Hz
Power consumption 47 W (0.5 W standby): AC 120V
Weight
Display only 8.2 lbs./3.7 kg
With Display and stand 9.5 lbs./4.3 kg
* Typical time for power output decrease of about one-half assuming continuous use in a room with normal lighting, normal brightness and
temperature at 77°F/25°C
Dimensional Drawings
The dimensional drawings are shown on the inside back cover.
As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for the LCD TV set
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
Model
LC-13B8U
Check item
The reception may be weak.
The quality of the broadcast may also be bad.
Make sure the antenna is facing the right direction.
Make sure the outside antenna is connected.
The picture is not sharp.
The picture moves.
The picture is doubled or tripled.
Make sure the antenna is facing the right direction.
There may be reflected electric waves from mountains or buildings.
The picture is spotted.
There may be interference from automobiles, trains, high voltage lines, neon
lights, etc.
There may be interference between the antenna cable and AC cord. Try
positioning them further apart.
There are stripes on the screen or
colors fade.
Is the unit receiving interference from other devices?
Transmission antennas of radio broadcasting stations, transmission antennas of
amateur radios and cellular phones may also cause interference.
Use the unit as far apart as possible from devices that may cause possible
interference.
Cautions regarding use in high and low temperature environments
When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not
a malfunction, and the unit will recover when the temperature returns to normal.
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as
this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: –4°F to +140°F (–20°C to +60°C)
Problem
35
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it
will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured
equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below
nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or
other misuse, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide
proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law.
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE
LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations
on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused
by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any
way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion
of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM
STATE TO STATE.
Model Specific Section
Your Product Model Number & Description:
Warranty Period for this Product:
Additional Item(s) Excluded from
Warranty Coverage (if any):
Where to Obtain Service:
What to do to Obtain Service:
LC-13B8U LCD Color Television
(Be sure to have this information available when you need
service for your Product.)
One (1) year parts and labor from the date of purchase.
Non-rechargeable batteries.
From a Sharp Authorized Servicer located in the United States.
To find the location of the nearest Sharp Authorized Servicer,
call Sharp toll free at 1-800-BE-SHARP.
Ship prepaid or carry in your Product to a Sharp Authorized
Servicer. Be sure to have Proof of Purchase available. If you
ship the Product, be sure it is insured and packaged securely.
Calling for Service
For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer
assistance, please call 1-800-BE-SHARP.
LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
TO OBTAIN PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharpusa.com
36
LIMITED WARRANTY
Consumer Electronics Products
Congratulations on your purchase!
Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer purchaser for this
Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer:
Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship. If any such
defects should be found in this product within the applicable warranty period, Sharp shall, at its option, repair or replace the product as
specified herein.
This warranty shall not apply to:
(a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate
use as outlined in the owner’s manual.
(b) Any Sharp product tampered with, modified, adjusted or repaired by any party other than Sharp, Sharp’s Authorized Service Centres
or Sharp’s Authorized Servicing Dealers.
(c) Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but not limited to
head cleaning tapes and chemical cleaning agents.
(d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product including but
not limited to earphones, remote controls, AC adapters, batteries, temperature probe, stylus, trays, filters, belts, ribbons, cables and
paper.
(e) Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.
(f) Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or liquid
spillage.
(g) Any product received without appropriate model, serial number and CSA/cUL markings.
(h) Any products used for rental or commercial purposes.
(i) Any installation, setup and/or programming charges.
Should this Sharp product fail to operate during the warranty period, warranty service may be obtained upon delivery of the Sharp product
together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized Sharp Service Centre or an
Authorized Sharp Servicing Dealer. In home warranty service may be provided at Sharp’s discretion on any Sharp television with the
screen size of 27” or larger and on any Sharp Over-the-Range Microwave Oven.
This warranty constitutes the entire express warranty granted by Sharp and no other dealer, service centre or their agent or employee is
authorized to extend, enlarge or transfer this warranty on behalf of Sharp. To the extent the law permits, Sharp disclaims any and all
liability for direct or indirect damages or losses or for any incidental, special or consequential damages or loss of profits resulting from a
defect in material or workmanship relating to the product, including damages for the loss of time or use of this Sharp product or the loss
of information. The purchaser will be responsible for any removal, reinstallation, transportation and insurance costs incurred. Correction of
defects, in the manner and period of time described herein, constitute complete fulfillment of all obligations and responsibilities of Sharp
to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict
liability or otherwise.
WARRANTY PERIODS:
Parts & Labour (exceptions noted)
Audio Products 1 year
Camcorder 1 year
DVD Products 1 year
Projector 1 year (lamp 90 days)
LCD & Plasma Display TV 1 year
Microwave Oven 1 year (magnetron component-4 additional years)
Television Products 1 year (picture tube component-1 additional year)
VCR Products 1 year
Vacuum Cleaner 1 year
To obtain the name and address of the nearest Authorized Sharp Service Centre or Dealer, please contact:
SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road East, Mississauga, Ontario L4Z 1W9
For more information on this Warranty, Sharp Extended Warranty
Offers, Sharp Canada Products, Accessory Sales, Dealer or Service
Locations, please call (905) 568-7140
Visit our Web site: www.sharp.ca
VALID IN CANADA ONLY
Revision 04/22/03
Unit: inch (mm)
Dimensional Drawings
8
13
/16 (224)
4
39
/64 (117)
12
13
/64 (310)
17
51
/64 (452)
5
15
/64 (133)
3
5
/8 (92)
1
11
/16
(43)
11
3
/16 (284)
3
15
/16 (100)
2
29
/32 (74)
7
29
/32 (200.8)
7
5
/8 (194)
12
23
/32 (323)
13 (330)
1
13
/16
(46)
10
33
/64 (267)
3
15
/16 (100)
LC13B8U_E_Hyo1234.p65 05.5.13, 9:21 AM2
LC-13B8U
Printed in Japan
Imprimé au Japon
Impreso en Japón
Impresso no Japão
TINS-B779WJZZ
05P06-JA-MM
OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN MANUAL DE OPERAÇÃO
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA DE
CRISTAL LÍQUIDO
TELEVISOR DE CRISTAL
LÍQUIDO
LC-13B8U
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
MANUAL DE OPERAÇÃO
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
Products that have earned the ENERGY STAR
®
are designed to protect the environment
through superior energy efficiency.
Les produits agréés ENERGY STAR
®
sont conçus pour protéger l’environnement par un
rendement énergétique supérieur.
Printed on 100% post-consumer recycled paper.
Imprimé sur 100% de papier recyclé.
Impreso en 100% de papel reciclado de postconsumo.
Papel 100% Reciclado-Cuidado do Meio Ambiente.
LC13B8U_E_Hyo1234.p65 05.5.13, 9:21 AM1
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp LC-13B8U-S Operation Manual bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp LC-13B8U-S Operation Manual in de taal/talen: Engels als bijlage per email.

De handleiding is 2,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info