459674
21
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
ENGLISH
FRANÇAIS
NEDERLANDS
DEUTSCH
E-19
TROUBLESHOOTING
Before calling for repair, please review the list below, since the problem may not be a unit malfunction.
SYMPTOM
REMEDY (not a malfunction)
The Remote Control does not
work.
• Have the batteries been depleted?
• Are the batteries inserted correctly?
Is a fluorescent lighting in the room flickering due to service
life?
Odours and smoke are not
removed.
• Clean or replace the filters if they appear to be heavily soiled.
(Refer to E-16,E-18)
The CLEAN-SIGN Light lights
green even when the air is
impure.
The air could be impure at the time the unit was plugged in.
(Refer to E-12)
Pull out the plug from the electrical outlet, and insert the plug
one minute later.
The CLEAN-SIGN Light lights
orange or red even when the air
is clean.
The sensitivity of the sensors become unstable when the
opening of the odour sensor or dust sensor is dirty or is clogged.
Clean the dust around the sensor opening using a vacuum
cleaner. (Refer to E-17)
When in Clean Mode, the Plasmacluster Indicator Light colour
will not change.
A clicking or ticking sound is
heard from the unit.
Clicking sound or ticking sound is emitted when the unit is
generating ions.
The discharged air has an
aroma or odour.
Check to see if the filters are heavily soiled.
Replace the filters.
Plasmacluster Air Purifiers emit small traces of ozone which
may produce an odour. These ozone emissions are well below
safety levels.
The Plasmacluster Indicator
Light remains blue and does
not change.
The unit does not operate when
cigarette smoke is in the air.
Is the unit installed in a location that is difficult for the sensor to
detect cigarette smoke?
• Are the dust or odour sensor openings blocked or clogged?
(In this case, clean the openings.) (Refer to E-17)
The MIST Unit Indicator Light
remains activated even after
replacing filter.
• After replacing filters, connect the power cord to an outlet and
press the Mist Unit Reset Button. (Refer to E-15)
The Plasmacluster Indicator
Light or the CLEAN-SIGN Light
will not activate.
Check to see if the Lights OFF Mode on the Remote Control is
selected. If so, then press the Lights ON/OFF Button on the
Remote Control to activate the indicator lights.
(Refer to E-11)
(Care Cycle : MIST Filter : 1 month)
Plasmacluster Indicator Light
repeat colour cycles between
blue and green.
Mist Unit Indicator Light does not
turn on even water is in.
When the water of the tank does
not decrease or the decrease of
the water is slow.
• The ION SHOWER operation is working.
Check to see if the Mist Unit and Tank are installed correctly.
Check the Mist Filter. Replace the filter when it is heavily soiled.
(Refer to E-14,18)
Please check if the impurities adhered to the surface of the
Float.
Clean the Mist Tray.
Check to see check if the Main Unit is put on a inclined surface.
The CLEAN-SIGN LIGHT switches
frequently.
The CLEAN-SIGN Light will automatically switches the colours
when detected by dust and odour sensors.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Sharp-FU-S63E

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp FU-S63E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp FU-S63E in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 14,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sharp FU-S63E

Sharp FU-S63E Gebruiksaanwijzing - Nederlands - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info