679538
6
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
4
Alarms
When the <Alarms> appears,
1. Press ENTER/SCAN button to enter the alarm setting screen.
2. Choose <Alarm 1: o > or <Alarm 2: o >, press the ENTER/SCAN
button to set the alarm On.
3. Using the / button to select the alarm time, press ENTER/SCAN
to con rm.
4. Select the alarm days: Daily, Once, Weekdays, Weekends.
5. Set the alarm mode: DAB, FM, Buzzer.
6. Set the alarm volume: there is a slide bar adjusting the alarm volume,
press / button to increase or decrease the volume level, press
ENTER/SCAN button to con rm.
7. After all the above settings, enter the Save screen, press ENTER/SCAN
button to save the alarm.
8. To cancel the alarms, enter the alarm setting screen, press ENTER/
SCAN button to select O and then enter save screen to save the alarm
o setting.
Sleep (Set sleep time)-brie y press SLEEP button
Enter the Sleep time setting screen to select the sleep time:
o /15/30/45/60/90 minutes.
Language (Set the system language)
Enter Language setting screen, use the /and ENTER/SCAN buttons to
set the system language.
Backlight
Enter Backlight setting screen, using the / button to select your
desired display backlight level: 3, 2, 1, o . Then press the ENTER/SCAN
button to con rm your selection.
Factory reset
To set the radio to the original settings, enter the Factory reset screen,
follow the tips <Factory reset?>, choose <YES> to reset, and the radio will
be restarted.
SW version
To check the software version of the system.
Prune the stations (only available in DAB/DAB+
mode)
To remove stations that listed but are unavailable.
Enter the Prune screen, use the / button to select <Yes> or <No>, then
press the ENTER/SCAN button to con rm your selection. The unavailable
stations now be deleted if you chose <Yes>.
Station order (only available in DAB/DAB+ mode)
Enter the Station order screen, use the /button to select one of the
station orders, then press the ENTER/SCAN button to con rm.
DAB/DAB+ Operations
After turn on the radio, press the MODE/STANDBY button repeatedly to
select and enter DAB/DAB+ mode.
Scan Stations
When turning on to DAB/DAB+ mode, the radio will automatically scan the
stations it found in this area.
Press the /button to select the previous or next stations, then press
the ENTER/SCAN button to activate to play the station.
Station Tuning
Long press the INFO/MENU button, when the <Station scan> appears,
press the ENTER/SCAN button, then use the /button to cycle through
the scanning options: <Full scan>, <Manual tune>.
1. Select the <Full scan>, and then press ENTER/SCAN button to enable
full scanning.
2. Select the <Manual tune> and press ENTER/SCAN button, use /
button to select stations from 5A:174.928MHz to 13F:239.200MHz.
Then press ENTER/SCAN button to activate the selected station.
Store Stations
It is possible to store up to 10 of your favourite DAB stations. This will
enable you to access your favourite stations quickly & easily.
1. To store a preset, you must  rst be listening to the station you would
like to save.
2. Press the PRESET button.
3. Use the /button to select desired preset number 1-10.
4. Press and hold the ENTER/SCAN button to con rm.
Recall A Stored Station
Once you have saved the stations to the preset stations. You can recall by
pressing the PRESET button.
Press the /button to select the stored stations, and press ENTER/
SCAN button to con rm.
Display Mode
Every time you press the INFO/MENU button, the display will cycle
through the following display modes:
The information is displayed on the lower segment of the LCD display.
Dynamic Label Segment (DLS)
Displays scrolling text information supplied by the broadcaster.
PTY (Programme Type)
Shows the type and description of the programme provided by the DAB/
DAB+ station.
Bit Rate
The data rate which the signal is being transmitted.
Frequency
Displays the station's transmission channel number and frequency.
Time and Date
Displays the time and date information provided by the broadcaster.
NOTES: DAB-unlike normal radio, groups together several
radio stations and transmits them on one frequency.
FM Operations
Switch to FM mode by pressing the MODE/STANDBY button.
Select Stations
To search for an FM station from 87.5 to 108.00MHz.
1. Press the or button to skip to go back or go forward the
frequency by the step of 0.05MHz.
2. Long press the or button to skip to the previous or next station
of the strongest reception. Once a station has been found, it stops
scanning automatically. If no station is found, it will stop after it has
cycled through the entire frequency.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Sharp-DR-450

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp DR-450 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp DR-450 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 1,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sharp DR-450

Sharp DR-450 Snelstart handleiding - Alle talen - 44 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info