Handleiding Sharp 32C530 Operation Manual (pagina 12 van 60) (Engels)

13219

Verklein

Vergroot

Pagina terug

1/60

Pagina verder

Dimension: 140mm x 215mm

COLOR TELEVISION

H OPERATION MANUAL H

MODEL

32C530

s an

NERGY

TA R

artner, SHARP has determined that this product meets the

NERGY

TAR

guidelines for energy efficiency.

NERGY

TA R

is a

U.S.

registered trademark.

CONTENTS

PAG E

• IMPORTANT INFORMATION/IMPORTANT

SAFEGUARDS .................................................... 2–4

• Supplied Accessories ............................................... 5

• Before Operating Your Television .............................. 5

• Antenna Connections ........................................... 5, 6

• Quick Reference Control Operation ......................... 7

• EZ SETUP during First Use ..................................... 8

• Demo Mode .............................................................. 9

• Accessing the MAIN MENU screen without

Remote Control ........................................................ 9

• Language ............................................................... 10

• Sleep Timer ............................................................ 10

• Video Adjust ........................................................... 11

• Audio Select ..................................................... 12, 13

MTS (Multichannel TV Sound) ............................ 12

SPEAKER (Internal Speaker Switch) ................. 12

FAO (Fixed Audio Output) ................................... 12

AUDIO ADJUST ................................................. 13

This operation manual includes basic operating

instructions in Spanish and French.

SPANISH is on page 48–52.

FRENCH is on page 53–57.

PAG E

• Closed Caption ....................................................... 14

• Parent Control .................................................. 15–25

V-CHIP Operation ......................................... 15–22

VIEW TIMER ................................................ 23–25

• Energy Save ........................................................... 26

• Set Up .............................................................. 27–33

EZ Setup ............................................................. 27

Channel Setting ............................................ 28–30

Blue Screen .................................................. 30, 31

Personal Preference ........................................... 32

Universal Plus Function ...................................... 33

• Auto Input ............................................................... 34

• CH/Input ID....................................................... 35, 36

• Screen Format........................................................ 37

• Using the Video and Audio Input Terminals ...... 38, 39

• Using the Audio Output Terminals .......................... 40

• Operation of Universal Remote Control ........... 41–45

• Before Calling for Service ....................................... 46

• Calling for Service .................................................. 46

• Specifications ......................................................... 47

• Limited Warranty .................................................... 59

A775 WJ

POW

32C530(01-04) 2/19/03, 9:14 AM1

Dimension: 140mm x 215mm

Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television

– built for outstanding quality, reliability and performance.

Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed

through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL

so that you may adjust the picture and color to your personal viewing preference.

We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color

Television set for years to come.

Please read these instructions carefully, and keep them handy for your future reference.

Model No.:

Serial No.:

IMPORTANT

To aid reporting in case of loss or theft, please record the TV’s

model and serial numbers in the space provided. The numbers

are located at the rear of the TV.

IMPORTANT INFORMATION

There are two important reasons for prompt warranty registration of your new SHARP television set. Use

the REGISTRATION CARD packed in with the set.

FIRST – WARRANTY

This is to assure that you will immediately receive the full consumer benefit of the parts, service and labor

warranty applicable to your purchase.

SECOND – CONSUMER PRODUCT SAFETY ACT

To assure that you will promptly receive any safety notification on inspection, modification or recall that

SHARP may be required to give under the 1972 Consumer Product Safety Act. PLEASE READ

CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE ON THE LAST PAGE.

WHAT IS ENERGY STAR

TVs and VCRs use energy both when they are on and when they are off. Americans spend more than $1

billion a year on energy consumed by TVs and VCRs when they are not in use. The new ENERGY

STAR

models will reduce that energy “leakage” by up to 75 percent. Ultimately, this will mean more than

$500 million a year in energy savings for consumers.

The energy savings will help reduce the burning of fossil fuels and the related carbon dioxide pollution

that contributes to global warming. If every American family replaced their TVs and VCRs with ENERGY

STAR

models, it would reduce carbon dioxide emissions by five million tons every year — equivalent to

eliminating the pollution from more than one million cars.

By using ENERGY STAR

products, you will save money on your electric bills and use less energy. That

makes good economic sense and it’s good for our environment.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO WET LOCATIONS.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with

arrowhead within a triangle is

intended to tell the user that

parts inside the product are a

risk of electric shock to

persons.

The exclamation point within a

triangle is intended to tell the

user that important operating

and servicing instructions are

in the papers with the

appliance.

“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention

to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in

particular, specifies that the cable ground shall be connected to the grounding system of the building,

as close to the point of cable entry as practical.”

32C530(01-04) 1/29/03, 12:22 PM2

Dimension: 140mm x 215mm

IMPORTANT INFORMATION (Continued)

WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not

expressly approved by the manufacturer could void the user’s authority to operate this

equipment.

PRODUCT DISPOSAL

This product utilizes a Cathode Ray Tube (CRT) containing lead and tin-lead solder.

Disposal of these materials may be regulated due to environment considerations. For disposal or

recycling information, please contact your local authorities or the Electronics Industries Alliance:

www.eiae.org

CAUTION: Do not place the AC power cord under the TV set or other heavy items.

CAUTION: Please read all of these instructions before you operate your television and save

these instructions for later use.

Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure

your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE

HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic

rules for its installation, use and servicing.

1. Unplug this television equipment from the wall outlet before cleaning.

2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

3. Do not use attachments not recommended by the television equipment manufacturer as they may cause

hazards.

4. Do not use this television equipment near water — for example, near a bath tub, washbowl, kitchen sink or

laundry tub, in a wet basement, or near a swimming pool, etc.

5. Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall, causing

serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand

recommended by the manufacturer or sold with the television equipment.

6. Television equipment and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the equipment and cart combination to

overturn.

7. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a

mounting kit approved by the manufacturer.

8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To

insure reliable operation of the television equipment and to protect it from overheating, these openings must

not be blocked or covered. This television equipment should not be placed in a built-in insulation such as a

bookcase unless proper ventilation is provided.

9. The openings should never be covered with a cloth or other material, and the bottom openings should not

be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television

equipment should never be placed near or over a radiator or heat register.

10. This television equipment should be operated only from the type of power source indicated on the marking

label. If you are not sure of the type of power supplied to your home, consult your television dealer or local

power company.

For television equipment designed to operate from battery power, refer to the operating instructions.

11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger

than the other). The 2-wire polarized plug will fit only one way into the power outlet.

If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and defeat

this safety feature.

12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will

be abused by persons walking on it.

IMPORTANT SAFEGUARDS

32C530(01-04) 1/29/03, 12:22 PM3

Dimension: 140mm x 215mm

IMPORTANT SAFEGUARDS (Continued)

13. Follow all warnings and instructions marked on the television equipment.

14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded

so as to provide some protection against voltage surges and built-up static charges. Section 810 of the

National Electrical Code provides information with respect to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding

conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements

for the grounding electrode.

15. For added protection for this television equipment during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent

damage to the equipment due to lightning and power-line surges.

16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact

with them might be fatal.

17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.

18. Never push objects of any kind into this television equipment through cabinet slots as they may touch

dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid

of any kind on the television equipment.

19. Do not attempt to service this television equipment yourself as opening or removing covers may expose you

to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel

under the following conditions:

A. When the power cord or plug is damaged or frayed.

B. If liquid has been spilled into the television equipment.

C. If the television equipment has been exposed to rain or water.

D. If the television equipment does not operate normally by following the operating instructions. Adjust

only those controls that are covered by the operating instructions as improper adjustment of other

controls may result in damage and will often require extensive work by a qualified technician to

restore the television equipment to normal operation.

E. If the television equipment has been dropped or the cabinet has been damaged.

F. When the television equipment exhibits a distinct change in performance — this indicates a need for

service.

21. Upon completion of any service or repairs to this television equipment, ask the service technician to

perform routine safety checks to determine that the television is in safe operating condition.

22. When replacement parts are required, be sure the service technician has used replacement parts

specified by the manufacturer that have the same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or other hazards.

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

ELECTRIC

SERVICE

EQUIPMENT

NEC—NATIONAL ELECTRICAL CODE

GROUND

CLAMP

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

32C530(01-04) 1/29/03, 12:22 PM4

Dimension: 140mm x 215mm

1 2 3

4 5 6

7 8 9

100

POWER

DVD

VCR

MENU MUTE

PAUSE

FLASHBACK

DISPLAY

INPUT

TV • CATV • VCR • DVD

STOP REC

REW PLAY FF

CH/SKIP

VOL

—

VOL

ENTER

A B C D

PERSONAL PREFERENCE

CATV TV

DVD VC R

Supplied Accessories

Size AA

Dry Batteries

Infrared Remote Control

RRMCGA035WJSB

Note:

Location

• For normal operation, your TV should be located in an area of the room where cool adequate ventilation

is provided. Do not place the back of the television set in a place where free airflow will be restricted.

• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using

magnets or any other magnetic substance, such as iron are kept well away from the TV set.

Power

Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you are

unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an

electrician. Do not defeat the safety feature of the polarized plug.

• If the set is not going to be used for a long period, such as during a vacation, unplug the set from the

wall outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the

POWER BUTTON in the OFF position.)

• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near

the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off the

radio.

• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received

due to interference from the TV.

•

Before using the television, prepare the Remote Control

To use the remote control, insert batteries first.

Inserting the batteries

• With your thumbnail, pull up the slit as indicated by the arrow to remove the battery cover. Insert two

batteries (size “AA”). Be sure to match the battery m/, terminals with the m/, marks inside the

compartment.

Before Operating Your Television

Battery

Cover

Pull up

Antennas

• The antenna requirements for good color television reception are more important than those for black

& white television reception. For this reason, a good quality outdoor antenna is strongly recommended.

The following is a brief explanation of the type of connections that are provided with the various

antenna systems:

Antenna Connections

F-type connector

75-ohm coaxial cable (round)

300-ohm twin-lead cable (flat)

1. A 75-ohm system is generally a round cable with

F-type connector that can easily be attached to

a terminal without tools (not supplied).

2. A 300-ohm system is a flat “twin-lead” cable that

can be attached to a 75-ohm terminal through a

300/75-ohm ADAPTOR (not supplied).

27C530(05-06) 1/29/03, 1:47 PM5

Dimension: 140mm x 215mm

CABLE TV (CATV) CONNECTION

• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm

coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.

• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay

channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by

the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled

channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,

consult your cable TV company.) For more specific instructions on installing cable TV, consult your

cable TV company. One possible method of utilizing the converter/descrambler provided by your

cable TV company is explained below.

Please note: RF switch equipped with position A/B (not provided) is required.

“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s

channel keys.

“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/

descrambler using the converter’s channel keys.

Note:

• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that

might be required.

OUTDOOR ANTENNA CONNECTION

• Refer to one of the following two diagrams when connecting to an outdoor antenna.

A: Using a VHF/UHF combination outdoor antenna.

B: Using separate VHF and/or UHF outdoor antenna.

• Connect an outdoor antenna cable lead-in to the ANT/CABLE terminal on the rear of the TV set.

75-ohm

coaxial cable

300-ohm

twin-lead

VHF/UHF ANTENNA

300/75-ohm

ADAPTOR

(Not supplied)

REAR PANEL

A. Combination VHF/UHF Antennas B. Separate VHF/UHF Antenna

Antenna Connections (Continued)

IN OUT

300-ohm

twin-lead

300-ohm

twin-lead

75-ohm coaxial

cable

VHF

ANTENNA

UHF

ANTENNA

COMBINER

(not supplied)

REAR PANEL

OUT

Cable TV converter/

descrambler

(not supplied)

Two-set

signal

splitter

(not

supplied)

Cable TV Line

RF switch (not supplied)

OUT

F-type connector

75-ohm coaxial cable

When connecting the RF cable to the TV set, do not

tighten F-type connector with tools.

If tools are used, it may cause damage to your TV

set.

(The breaking of internal circuit, etc.)

F-type connector should be finger-tightened only.NOTICE

27C530(05-06) 1/29/03, 1:47 PM6

Dimension: 140mm x 215mm

Quick Reference Control Operation

•

Part Names

Front Panel

Quick Reference Control Operation

Note:

• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the

remote control, place it under a fluorescent light or other lighting.

• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.

• The degree of illumination will vary depending on the strength of lighting used.

• The degree of illumination will decrease with time and depending on the temperature.

• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.

• Sunlight and fluorescent lighting are the most effective when charging the display.

Basic Remote Control Functions

CHANNEL UP/DOWN

(8) Selects next higher

channel.

(9) Selects next lower

channel.

VOLUME UP/DOWN

(+) Increases sound.

(–) Decreases sound.

POWER

Press → On.

Press again → Off.

SENSOR AREA FOR

REMOTE CONTROL

Press → Accesses MAIN MENU.

Press again → Exits MAIN MENU.

1 2 3

4 5 6

7 8 9

100

POWER

MENU MUTE

PAUSE

FLASHBACK

DISPLAY

INPUT

TV • CATV • VCR • DVD

STOP REC

REW PLAY FF

CH/SKIP

VOL

—

VOL

ENTER

A B C D

PERSONAL PREFERENCE

DVD

VCR

CATV TV

DVD VCR

POWER

Press → On.

Press again → Off.

REMOTE KEYPAD

Accesses any channel from keypad.

FLASHBACK

Returns to previous channel.

PERSONAL PREFERENCE

With the Personal Preference buttons,

you can program your favorite

programs by using the 4 categories A,

B, C and D. The channels can be

accessed quickly by using these

buttons. (See page 32.)

VOLUME UP/DOWN

(+) Increases sound.

(–) Decreases sound.

• In menu mode, changes or selects

the TV adjustments.

Press → Accesses MAIN MENU.

Press again → Exits MAIN MENU.

CATV/DVD-TV/VCR MODE

SELECT SWITCH

In TV/VCR position, sends power and

channel select commands (Channel

up/down and Random Access buttons)

to the TV and VCR control.

In CATV/DVD position, sends power

and channel select commands to a

cable TV converter and DVD control.

DVD/VCR CONTROL

See page 41.

Infrared Transmitter Window

DISPLAY

Press → Displays receiving channel for

four seconds.

Press again → Removes display.

• Temporarily displays receiving

channel when in Closed Caption

mode.

INPUT

Press → Switch to external video

INPUT 1 mode.

Press 2 times → Switch to external video

INPUT 2 mode.

Press 3 times → Switch to external video

INPUT 3 mode or COMPONENT mode.

Press 4 times → Switch back to the

original TV mode.

See page 39.

ENTER

Used in some instances where a Cable

Converter Box requires an “enter”

command after selecting channels,

when using the REMOTE KEYPAD

button. (See page 41)

CHANNEL UP/DOWN

(8) Selects next higher channel.

(9) Selects next lower channel.

• See pages 28 ~ 30 for channel

presetting.

• Moves the “ [ ” mark of the MENU

screens.

MUTE

Press → Mutes sound.

Press again → Restores sound.

• CLOSED CAPTION appears when

sound is muted.

VIDEO/AUDIO

TERMINALS

INSIDE DOOR

IN 2

32C530(07) 2/18/03, 4:39 PM7

Dimension: 140mm x 215mm

•

When you turn on the TV for the first time, it will automatically

memorize the broadcasting channels.

Please perform the following instructions before pressing the

POWER button.

(1) Insert the batteries into the remote control. (See page 5)

(2) Connect the antenna cable to the TV set. (See pages 5, 6)

(3) Plug in the AC POWER cord to the wall outlet.

1 Press the POWER button on the TV set or on the Remote Control

to turn on the TV. The SELECT LANGUAGE screen will be

displayed.

2 Press CH a/s to select “ENGLISH”, “ESPAÑOL (SPANISH)” or

“FRANCAIS (FRENCH)”.

3 Press VOL k/l to access the EZ SETUP screen.

4 Press VOL k.

The tuner will automatically search for the

broadcasting and cable TV channels. (The CH No.

will automatically increase when it appears.)

If you want to stop the EZ SETUP process once it

has started, press VOL l and it will be canceled.

If you want to SET UP again, please refer to page

27 on SET UP.

To cancel EZ SETUP

Press VOL l.

5 Once EZ SETUP is complete, the lowest channel number

memorized will be displayed.

Note:

• If EZ SETUP does not memorize all the channels in your region, please refer to page 28–30 for more

information on manually memorizing the channels using CHANNEL SETTING.

• It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is

incorrect or frequency jamming is occurring around the area. Please refer to pages 28–30 for more

information on manually memorizing the channels using CHANNEL SETTING.

SELECT

ENGL I SH

FRANCA I S

SELECT :CH

SET : VOL

+ –

ESPAÑOL

LANGUAGE

SELECT

ENGL I SH

FRANCA I S

SELECT :CH

SET : VOL

+ –

ESPAÑOL

LANGUAGE

START

STOP START

SETUP?EZ

OR CABL E.CONNECT AN TENNA

STOP START

PLEASE WA I T

125

AUTO PROGRAMMI NG

VOL

—

VOL

1 2 3

4 5 6

7 8 9

100

FLASHBACK

ENTER

PERSONAL PREFERENCE

POWER

DVD

VCR

MENU MUTE

CATV TV

DVD VCR

DISPLAY

INPUT

VOL

—

VOL

ABCD

POWER

(EZ SETUP screen)

EZ SETUP during First Use

(On the Set)

(On the Remote Control)

(SELECT LANGUAGE screen)

(START)

(STOP)

VOL

—

POWER

CHANNEL

UP (a)/

DOWN (s)

VOLUME

(

)/(

)

32C530(08-09) 1/29/03, 1:43 PM8

Dimension: 140mm x 215mm

Demo Mode

• To learn more about the TV set, you can enter DEMO mode. Simply

press and hold MENU on the TV set for more than 3 seconds.

• To cancel DEMO mode, again press MENU on the TV set.

Example:

DEMO mode display

Accessing the MAIN MENU screen without Remote Control

• If you misplaced your Remote Control you can still access most settings

via the MAIN MENU screen by pressing MENU on the TV set.

• Some features of your TV set are not accessible without the Remote

Control. If you lost your Remote Control, contact a Sharp Service

Center for a replacement.

(On the Set)

button

32C530(08-09) 2/18/03, 4:40 PM9

Dimension: 140 X 215 mm

•

The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s

to move the “E” mark to “SET UP”.

3 Press VOL k/l to access the SET UP screen, then press CH a/s

to move the “E” mark to “LANGUAGE”.

4 Press VOL k/l to access the LANGUAGE select screen.

5 Press CH a/s to select “ENGLISH”, “ESPAÑOL (SPANISH)” or

“FRANCAIS (FRENCH)”.

6 Press MENU to exit.

Sleep Timer

•

You can preset your television to turn off automatically in increments of 30, 60, 90, or 120 minutes.

1 Press MENU to access the MAIN MENU screen.

2 Press VOL k/l to access the SLEEP TIMER screen.

3 Press VOL k/l to set a sleep time of 30, 60, 90 or 120 minutes.

4 Press MENU to exit.

Note:

• To turn off the SLEEP TIMER, repeat the above SLEEP TIMER steps and select “– – – M REMAIN”

during step 3.

• While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular

intervals or when the Remote’s DISPLAY key is pressed twice. 5 minutes before the SLEEP TIMER

turns off the TV, the screen prompts the time remaining for 4 seconds. The SLEEP TIMER shows a

similar display for each remaining minute and a 10-second display right before shutting off the TV.

• If you turn the POWER OFF, the SLEEP TIMER will automatically reset.

Language

(SLEEP TIMER screen)

(LANGUAGE select screen)

(MAIN MENU screen)

→

(SET UP screen)

→

SLEEP T IMER

AUD I O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

SLEEP T IMER

AUD I O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

SLEEP T IMER

AUD I O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

ENGL I SH

FRANCA I S

ESPAÑOL

LANGUAGE

ENGL I SH

FRANCA I S

ESPAÑOL

IDIOMA

SLEEP T IMER

120M REMA I N

BL UE SCREEN

SCREEN FORMAT

PERSONAL PREF.

UNIVERSAL

LANGUAGE

CH SETT I NG

CH / I NPUT I D

AUTO I NPUT

PL US

SET UP

VOL

—

VOL

—

VOL

—

VOL

—

VOL

32C530(10-11) 1/29/03, 1:55 PM10

Dimension: 140 X 215 mm

•

Description of Adjustment Items

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s

to move the “E” mark to “VIDEO ADJUST”.

3 Press VOL k/l to access the PICTURE adjust screen.

4 Press CH a/s

to select the desired adjustment item. (Refer to the

diagram below.)

5 Press VOL k/l to adjust the setting.

6 Repeat steps 4 to 5 to adjust other settings.

7 Press MENU to exit.

Note:

• VIDEO ADJUST setting, once set, is shared among AIR/CABLE, INPUT 1, INPUT 2, and INPUT 3

modes.

• VIDEO ADJUST setting for INPUT 3 when used as COMPONENT can be set independently.

(PICTURE adjust screen)

→

VOL k

increases contrast

VOL l

decreases contrast

(MAIN MENU screen)

Video Adjust

VOLUME

(

)/(

)

CHANNEL

UP (

DOWN (

)

PICTURE

TINT

COLOR

SHARP

COLOR TEMP.

RESET

: CH s

: CH a

BRIGHT

PICTURE 50

SLEEP T IMER

AUD I O SEL ECT

CLOSED CAPT ION

PARENT CONTROL

ENERGY

SET UP

SAVE

V IDEO ADJUST

1 2 3

4 5 6

7 8 9

100

POWER

MENU MUTE

FLASHBACK

DISPLAY

INPUT

VOL

—

VOL

ENTER

A B C D

PERSONAL PREFERENCE

DVD

VCR

CATV TV

DVD VCR

VOL

—

VOL

—

VOL

Selected item VOL

button VOL

button

PICTURE To increase contrast To decrease contrast

TINT To make skin tones greenish To make skin tones purplish

COLOR To increase color intensity To decrease color intensity

BRIGHT To increase brightness To decrease brightness

SHARP To increase sharpness To decrease sharpness

COLOR TEMP. To choose a LOW, ML, MH or HIGH color tone.

RESET To return all adjustments to factory preset levels.

32C530(10-11) 1/29/03, 1:55 PM11

Dimension: 140 X 215 mm

H MTS (Multichannel TV Sound)

This function allows reception of stereo or bilingual TV sound.

•

You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.

Stereo broadcasts

Live television broadcasts of sports, shows, concerts, etc. can be received in dynamic stereo sound.

SAP broadcasts

Television broadcast can be received with either MAIN or SAP sound.

MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)

SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)

•

If stereo sound is difficult to hear;

You can obtain clearer sound by manually switching to fixed monaural mode.

H SPEAKER (Internal Speaker Switch)

This function turns the TV’s internal speakers “ON” or “OFF” when listening to sound from

external speakers by using the AUDIO OUTPUT Terminals. (See page 40).

H FAO (Fixed Audio Output)

This function turns the TV’s internal speakers “OFF” and allows fixed audio output from the

AUDIO OUTPUT Terminals. (See page 40). With FAO, the TV’s volume control is disabled.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s

to move the “E” mark to “AUDIO SELECT”.

3 Press VOL k/l

to access the AUDIO SELECT screen.

4 Press CH a/s

to move the “E” mark to “MTS”, “SPEAKER”, “FAO”

or “AUDIO ADJUST”.

5 Press VOL k/l

to select “STEREO”, “SAP” or “MONO” when the

“E” mark is at “MTS” position.

Audio Select

SLEEP T IMER

AUD I O SEL ECT

CLOSED CAPT ION

PARENT CONTROL

ENERGY

SET UP

SAVE

V IDEO ADJ UST

VOL

—

VOL

AU I ODSEECTL

SPEAKER

MTS

FAO

:OFF

:ON

:STEREO

AUD I D JUSTOA

AU I ODSEECTL

SPEAKER

MTS

FAO

:OFF

:ON

:STEREO

AUD I D JUSTOA

VOL

—

VOL

(MAIN MENU screen)

→

(AUDIO SELECT screen)

→

(AUDIO SELECT

screen

)

MTS

STEREO

SAP

MONO

SPEAKER

OFF

FAO

OFF

32C530(12-13) 1/29/03, 2:01 PM12

Dimension: 140 X 215 mm

H AUDIO ADJUST

When the “E” mark is at “AUDIO ADJUST”, press VOL k/l to

access the AUDIO ADJUST screen. To access the desired item,

press CH a/s. To adjust the audio setting, press VOL k/l.

6 Press MENU to exit.

An example screen displaying ON AIR when receiving stereo broadcasts

Current channel number

“← ON AIR” will appear next to STEREO or

SAP when receiving STEREO or SAP

broadcasts.

Note:

• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo

broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.

• Selecting MTS while receiving video signals from INPUT terminals does not change the type of

sound; in this case, sound is determined by the video source.

• If “FAO” mode is on, “SPEAKER” mode will automatically turn off. Changing “SPEAKER” setting will

not affect “FAO” mode.

Audio Select (Continued)

STEREO

SAP

AIR

MONO

(CHANNEL call on screen)

TREBLE

RESET

BASS

BALANCE

Selected item VOL k button VOL l button

TREBLE To increase treble response. To decrease treble response.

BASS To increase bass response. To decrease bass response.

BALANCE To emphasize the right To emphasize the left

speaker’s volume. speaker’s volume.

RESET To return all adjustments to factory preset levels.

TREBL E 0

32C530(12-13) 1/29/03, 2:01 PM13

Dimension: 140 X 215 mm

•

How to set CLOSED CAPTION

• Your TV is equipped with an internal Closed Caption decoder. “Closed

Caption” is a system which allows conversations, narration, and sound

effects in TV programs and home videos to appear as captions on the

TV screen (see the illustration).

• Not all the programs and videos will offer closed captioning. Please

look for the “

” symbol to ensure that captions will be shown.

• Closed Caption broadcast can be viewed in two modes: CAPTION

and TEXT. For each mode, two channels are available, CH1 and CH2:

The CAPTION mode shows subscripts of dialogs and commentaries

of TV dramas and news programs while allowing clear view of the

picture.

The TEXT mode displays over the picture other various information

(such as TV program schedule, weather forecast, etc.) that is

independent of the TV programs.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s

to move the “E” mark to “CLOSED CAPTION”.

3 Press VOL k/l to access the CLOSED CAPTION setting screen.

4 Press CH a/s

to move the “E” mark to either “MODE” or “DATA”.

5 Press VOL k/l to change the CLOSED CAPTION setting.

6 Press MENU to exit.

Note:

• If a broadcast contains CLOSED CAPTION and the MUTE button is pressed, the set enters CAPTION

mode automatically. Pressing MUTE again will return the set to its previous condition.

• Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor

or if there are problems at the broadcast source. This does not necessarily indicate a problem with

your TV.

• If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION

broadcast, the closed captions will disappear momentarily.

• If no TEXT broadcast is being received while viewing in the TEXT mode, the screen may become

dark and blank for some programs. Should this occur, switch the Closed Caption mode to “OFF”.

CLOSED

MODE

CAPT I ON

: CAPT I ON

DA T A

: CH 1

DATA : CH 1

: CAPT IONMOD E

CLOSED CAPT ION

CLOSED

MODE

CAPT I ON

: CAPT I ON

DA T A

: CH 1

CAPTION

TEXT

OFF

CH 1

CH 2

→

SLEEP T IMER

AUD I O SEL ECT

CLOSED CAPT ION

PARENT CONTROL

ENERGY

SET UP

SAVE

V IDEO ADJ UST

PERSONAL PREFERENCE

MENU MUTE

CATV TV

DVD VCR

VOL

—

VOL

ABCD

VOL

—

VOL

—

VOL

Closed Caption

VOLUME

(

)/(

)

CHANNEL

UP (

DOWN (

)

(MAIN MENU screen)

(CLOSED CAPTION setting screen)

MODE :

DATA :

32C530(14-16) 1/29/03, 2:01 PM14

Dimension: 140 X 215 mm

1. User setting 2. Block table

age

based

not to

block

not to

block

Select

block

auto-

block

auto-

block

auto-

block

PG-13

NC-17

– – – – –

BLOCK

PG-13

NC-17

1. User setting 2. Block table

age

based

not to

block

not to

block

not to

block

Select

block

auto-

block

auto-

block

PG-13

NC-17

– – – – –

BLOCK

PG-13

NC-17

Parent Control (V-CHIP Operation)

H V-CHIP

• This function allows you to restrict TV programs and also allows you to control TV usage based on

FCC data. This function is to prevent your children from watching violence or sexual scenes that may

be harmful.

• Restriction of TV programs includes two characters that contain information about the program’s MPAA

rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are restricted

by age and contents.

• Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for

complete control.

[1] MPAA RATING

RATING

G GENERAL AUDIENCES. All ages admitted.

PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for

children.

PG-13 PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for

children under 13.

R RESTRICTED. Under 17 requires accompanying parent or adult guardian.

NC-17 NO ONE 17 AND UNDER ADMITTED.

X X Rating is an older rating that is unified with NC-17 but may be encoded on

older movie’s data.Note:

• MPAA RATING

Example 1:

“PG-13” in the age-based rating is blocked, this

will automatically block the higher ratings “R”,

“NC-17”, “X” also.

Note:

• MPAA RATING is only age-based.

[2] TV PARENTAL GUIDELINES

content based

AGE D L S V FV

(Sexually (Adult (Sexual (Violence) (Fantasy

Suggestive Language) Situation) Violence)

Dialog)

TV-Y (All children)

–––––

TV-Y7 (Direct to Older Children)

––––

TV-G (General Audience)

–––––

TV-PG (Parental Guidance

V V V V V

–

Suggested)

TV-14 (Parents Strongly

V V V V V

–

Cautioned)

TV-MA (Mature Audience Only)

–

V V V

–

: Content Rating can be set.

l : Content Rating cannot be set (not normally broadcast by TV station).

Example 2:

“R” in the age-based rating is blocked, this will

automatically block the higher rating “NC-17”, “X”

also.

age

based

RATING

age

based

32C530(14-16) 1/29/03, 2:01 PM15

Dimension: 140 X 215 mm

Parent Control (V-CHIP Operation) (Continued)

• TV PARENTAL GUIDELINES (Example)

Example 1.1 : Age Based setting

Clear

s (block) from each "AGE" box for all ratings.

This will automatically unblock everything.

Example 1.2 : Age Based setting

For “TV-G” put a

in the "AGE" box. This will automatically block the

higher age ratings “TV-PG”, “TV-14” and “TV-MA” as well as “TV-G”.

Please note the content ratings “D”, “L”, “S”, “V” are automatically blocked

as well.

Example 2.1 : Content Based setting

If you choose to unblock every content-based items (“D”, “L”, “S”, “V”),

clear the

(block) from each “AGE” box of “TV-PG”, “TV-14” and “TV-

MA”.

Example 2.2 : Content Based setting

Put a

in the box corresponding to “TV-PG” (row) and “V (Violence)”

(column). This will automatically block the “V” boxes for “TV-14” and

“TV-MA”. Setting only “TV-PG-V”, “TV-14-V” or “TV-MA-V” will not block

all programs rated “TV-PG”, “TV-14” or “TV-MA”.

Example 3 : Resetting an Age Based setting

For “TV-14”, put a

(block) in the “AGE” box.

This will again automatically block the content ratings “D”, “L”, “S”, “V”

for “TV-MA” as well as “TV-14” (“D” is not available for “TV-MA”).

Please note that the lower age rating “TV-PG” does not change from its

previous settings after this.

Note:

• Content ratings can be modified but only in the combinations indicated by

in the table on page 15.

• Changing a lower age rating’s content setting to “BLOCK” automatically changes the same higher age

rating’s content setting to “BLOCK” regardless of their previous settings.

• Changing a lower rating’s “AGE” setting to “BLOCK” automatically changes all higher ratings to “BLOCK”

regardless of their previous settings.

• For “TV-Y7”, “TV-PG”, “TV-14” and “TV-MA”, if you clear the

in the “AGE” box (unblock) you can still

change settings based on content.

• Clearing a higher rating’s age or content setting will not clear lower settings. Make sure that all undesired

boxes are blocked.

[3] ADDITIONAL MODE

Besides “MPAA RATINGS” and “TV PARENTAL GUIDELINES”, new ratings system’s data can be

downloaded when they become available. (See page 19.)

TV–Y

TV–Y7

TV–G

TV–PG

TV– 1 4

TV–MA

MENU : RE T URN

GAE

–

BLOCK

VIEW

TV– Y

TV– Y7

TV– G

TV– PG

TV– 14

TV–MA

MENU : RE T URN

GAE

–

VVVV

VVV

BLOCK

VIEW

–

TV– Y

TV– Y7

TV– G

TV– PG

TV– 14

TV–MA

MENU : RE T URN

GAE

–

BLOCK

VIEW

TV– Y

TV– Y7

TV– G

TV– PG

TV– 14

TV–MA

MENU : RE T URN

GAE

–

BLOCK

VIEW

TV– Y

TV– Y7

TV– G

TV– PG

TV– 14

TV–MA

MENU : RE T URN

GAE

–

BLOCK

VIEW

32C530(14-16) 1/29/03, 2:01 PM16

Dimension: 140 X 215 mm

•

How to set additional rating mode (Example)

Once downloading is complete, you can set the blocking pattern as follows.

1 Repeat steps 1 to 4 of [1] MPAA RATING.

2 Press CH a/s to move the “E” mark to “Cdn. English Ratings”,

then press VOL k/l.

3 You can select “BLOCK” or “– – – – –” (unblock) for each rating

item by pressing CH a/s and VOL k/l.

4 You can select “BLOCK” or “– – – – –” (unblock) for each rating

item by pressing CH a/s and VOL k/l if you select “Cdn. French

Ratings” in step 2.

Note:

• You are able to download up to 4 different rating systems.

MPAA

TV GU I

Cdn .

DOWN L

nEglis Rhatinsg

Cdn .

rFenchRatinsg

EDLINES

OAD : ON

STATU

S:ON

(After downloading the

rating data)

C8+

14+

18+

INDIV

B: LOCK

–: ––––

B: LOCK

–: ––––

B: LOCK

–: ––––

IDUAL BL

MENU : RET URN

OCK

(ENGLISH INDIVIDUAL

BLOCK screen)

13+

16+

18+

INDIV

–: ––––

B: LOCK

–: ––––

B: LOCK

–: ––––

IDUAL BL

MENU : RET URN

OCK

(FRENCH INDIVIDUAL

BLOCK screen)

→

VOL

—

VOL

—

VOL

—

VOL

→

Parent Control (V-CHIP Operation) (Continued)

32C530(19-22) 1/29/03, 2:02 PM20

Dimension: 140 X 215 mm

•

Activating the V-CHIP BLOCK

1 Repeat steps 1 to 4 of [1] MPAA RATING.

2 Press CH a/s to move the “E” mark to “STATUS”. Press VOL k/

l to activate the V-CHIP BLOCK. (If STATUS is OFF, V-CHIP

BLOCK will not operate.)

3 Press MENU, then “INPUT SECRET No.” will be displayed.

Note:

•

If SECRET No. is already set, skip to step 5.

4 Enter a 4-digit secret No. using the REMOTE KEYPAD.

5 Press MENU and the secret No. will be registered.

•

To temporarily cancel the V-CHIP BLOCK

1 “V-CHIP HAS BEEN ACTIVATED” appears if you view a program

with the same program rating data you configured.

Note:

•“V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured to “ON”.

2 Press MENU, then “INPUT SECRET No.” will be displayed.

3 Enter the 4-digit secret No. using the REMOTE KEYPAD, then V-

CHIP BLOCK will be canceled temporarily. If the wrong secret No.

is chosen, “SECRET No. IS INCORRECT” will be displayed. Input

the secret No. again in this case.

Note:

• If you turn the power ON from OFF, the V-CHIP BLOCK will be activated again.

VOL

—

VOL

→

321

654

987

100

ENTER

MPAA

TV GU I

DOWN L

EDLINES

OAD : OF F

STATU

S:ON

I NPU T

––––

SECRET No .

I NPU T

1234

SECRET No .

Parent Control (V-CHIP Operation) (Continued)

321

654

987

100

ENTER

V– CH I P

TV–Y7

HAS BEEN ACT I VATED

I NPU T

––––

SECRET No .

I NPUT SECRET No .

(V-CHIP select screen)

32C530(19-22) 1/29/03, 2:02 PM21

Dimension: 140 X 215 mm

•

To change the V-CHIP BLOCK setting after registering a secret No.

1 Repeat steps 1 to 4 of [1] MPAA RATING, then “INPUT SECRET

No.” will be displayed.

2 Enter the 4-digit secret No. using the REMOTE KEYPAD and

the V-CHIP select screen will be displayed. Set V-CHIP BLOCK

again.

•

If you forget or need to change your secret No., clear the original secret No. and set

up a new one.

1 Repeat steps 1 to 4 of [1] MPAA RATING, or 1 to 2 of To

temporarily cancel the V-CHIP BLOCK, then “INPUT SECRET

No.” will be displayed.

2 Press and hold both VOL k and CH a on the TV set

simultaneously until the message “INPUT SECRET No.”

disappears.

3 Press the MENU button twice to exit.

I NPUT

––––

SECRET No .

I NPUT SECRET No .

321

654

987

100

ENTER

Parent Control (V-CHIP Operation) (Continued)

(On the Set)

VOL k and CH a

buttons

32C530(19-22) 2/18/03, 4:43 PM22

Dimension: 140 X 215 mm

H VIEW TIMER

This function allows you to restrict TV viewing time and also allows you to control TV usage.

This function is to prevent your children from watching too much TV.

VIEWING TIME (an accumulative timer: counts only the time

duration while the TV power is on.)

• VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10

hours) in 30 minutes intervals.

OFF TIME (Restricts TV viewing after the VIEWING TIME reaches

zero.)

• OFF TIME can be set from 30M (30 minutes) to 10H00M (10 hours)

in 30 minutes intervals.

STATUS (Select ON to activate VIEW TIMER)

•

How to set VIEW TIMER

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s

to move the “E” mark to “PARENT CONTROL”.

3 Press VOL k/l to access the PARENT CONTROL screen.

4 Press CH a/s

to move the “E” mark to “VIEW TIMER”.

5 Press VOL k/l to access “VIEW TIMER”.

6 Press CH a/s

to select “VIEWING TIME” and “OFF TIME”. For

each selection, press the VOL k/l to set the time duration.

7 Press CH a/s

to select “STATUS”. Press the VOL k/l to turn

ON the “VIEW TIMER”. (If STATUS is OFF, VIEW TIMER will not

operate.)

8 Press MENU. “INPUT SECRET No.” will be displayed.

Note:

•

If SECRET No. is already set, skip to step 10.

Parent Control (VIEW TIMER)

(MAIN MENU screen)

(PARENT CONTROL screen)

VIEWING

––H

TIME

OFF

––H

––M

TIME

STATUS : OFF

V I EW T I MER

SLEEP T IMER

AUD I O SEL ECT

CLOSED CAPT ION

PARENT CONTROL

ENERGY

SET UP

SAVE

V IDEO ADJ UST

V –CH I P BLOCK

PARENT CONTROL

VIEW TIMER

VIEWING

––H

TIME

OFF

––H

––M

TIME

STATUS : OFF

V I EW T I MER

→

VOL

—

VOL

→

VOL

—

VOL

→

VOL

—

VOL

—

VOL

VIEWING

TIME

OFF

––H

00M

––M

TIME

STATUS : OFF

V I EW T I MER



VIEWING

TIME

OFF

00M

5H 00M

TIME

STATUS : ON

V I EW T I MER



I NPU T

––––

SECRET No .

32C530(23-26) 1/29/03, 2:02 PM23

Dimension: 140 X 215 mm

Parent Control (VIEW TIMER) (Continued)

9 Enter a 4-digit SECRET No. using the REMOTE KEYPAD.

Press MENU to exit.

Example:

• To restrict anybody from watching TV for more than 5 hours, after watching

the TV for 2 hours, your settings would look like the one on the right.

• You can choose to watch the 2 hours of TV as you wish. For example, you

could watch 1 hour of TV, turn the TV off for 30 minutes, then turn the TV

on and watch the remaining 1 hour of the VIEWING TIME.

•

To change the VIEW TIMER setting after registering a secret No.

1 Repeat steps 1 to 4 of How to set VIEW TIMER. Press

VOL k/l, and “INPUT SECRET No.” will be

displayed.

2 Enter the 4-digit SECRET No. using the REMOTE

KEYPAD, and the VIEW TIMER access screen will

be displayed. Repeat steps 5, 6.

Note:

• When you choose the correct secret No., the VIEW TIMER access screen

is displayed. If the wrong secret No. is chosen, “SECRET No. IS

INCORRECT” is displayed. Input the secret No. again in this case.

•

To cancel the VIEW TIMER (While the TV set is OFF but the VIEW

TIMER is set.)

1 Turn on the TV; a blue screen message “TIME OVER” will appear. If

you do nothing, the TV will turn off in approximately 30 seconds.

2 Enter the 4-digit secret No. using the REMOTE

KEYPAD. When you choose the correct secret No.,

the VIEW TIMER is canceled. If the wrong secret No.

is chosen, “SECRET No. IS INCORRECT” is

displayed. Input the secret No. again in this case.

→

VIEWING

TIME

OFF

00M

5H 00M

TIME

STATUS : ON

V I EW T I MER



321

654

987

100

ENTER

321

654

987

100

ENTER

321

654

987

100

ENTER

VOL

—

VOL

I NPU T

1234

SECRET No .

I NPU T

––––

SECRET No .

SECRE T I S I NCORRECTNo .

T I ME OVER

I NPU T

––––

SECRET No .

T I ME OVER

I NPUT SECRET No .

32C530(23-26) 1/29/03, 2:02 PM24

Dimension: 140 X 215 mm

Parent Control (VIEW TIMER) (Continued)

•

To cancel the VIEW TIMER setting or change the secret No. (If

you forget the SECRET No.)

1 Repeat steps 1 to 4 of How to set VIEW TIMER. Press VOL k/l,

and “INPUT SECRET No.” will be displayed.

2 Press and hold both VOL k and CH a on the TV set

simultaneously until the VIEW TIMER access screen is displayed.

Now you can cancel the VIEW TIMER settings or change the

SECRET No. while “INPUT SECRET No.” is displayed.

•

Notice of Remaining VIEWING TIME

• For every 30 minute interval, the remaining time will be displayed for

4 seconds. For the last 5 minutes, the remaining time will be displayed

every minute.

• “0 REMAIN” will be displayed for 10 seconds just before the VIEWING

TIME expires.

REMAIN

30M

VIEWING TIME

REMAIN

05M

VIEWING TIME

REMAIN

VIEWING TIME

(On the Set)

VOL k and CH a

buttons

VOL

—

VOL

I NPUT

––––

SECRET No .

32C530(23-26) 2/18/03, 4:44 PM25

Dimension: 140 X 215 mm

Energy Save

•

This feature lets you lower the power consumption of your TV

set which in turn saves you money and minimizes the impact on

the environment. When this feature is turned on, it reduces the

brightness of the TV to a level that consumes approximately 20

percent less energy than when the feature is turned off.

The reduction in brightness will be less noticeable under low

room lighting conditions.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s

to move the “E” mark to “ENERGY SAVE”.

3 Press VOL k/l to access the ENERGY SAVE select screen.

4 Press VOL k/l to select “ON”.

5 Press MENU to exit.

VOLUME

(

)/(

)

CHANNEL

UP (

DOWN (

)

(MAIN MENU screen)

(ENERGY SAVE select screen)

→

VOL

—

VOL

—

VOL

PERSONAL PREFERENCE

MENU MUTE

CATV TV

DVD VCR

VOL

—

VOL

ABCD

ENERGY SAVE : ON

ENERGY SAVE : OFF

SLEEP T IMER

AUD I O SEL ECT

CLOSED CAPT ION

PARENT CONTROL

ENERGY

SET UP

SAVE

V IDEO ADJ UST

32C530(23-26) 1/29/03, 2:02 PM26

Dimension: 140 X 215 mm

H EZ Setup

By operating the channel preset functions, you can preset your

TV to the desired channels for viewing.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

3 Press VOL k/l to access the SET UP screen, then press

CH a/s to move the “E” mark to “CH SETTING”.

4 Press VOL k/l to access the CH SETTING screen.

5 Press VOL k/l to access the EZ SETUP screen.

6 Press VOL k.

The tuner will automatically search for the

broadcasting and cable TV channels. (The CH No.

will automatically increase when it appears.)

If you want to stop the EZ SETUP process once it

has started, press VOL l. Search will be canceled.

To cancel EZ SETUP

Press VOL l.

7 Once EZ SETUP is complete, the lowest channel number

memorized will be displayed.

Set Up

(MAIN MENU screen)

→

VOLUME

(

)/(

)

CHANNEL

UP (

DOWN (

)

(EZ SETUP screen)

(CH SETTING screen)

(SET UP screen)

→

BLUE SCREEN

SCREEN FORMAT

PERSONAL PREF.

UN I VERSAL

LANGUAGE

CH SETT ING

CH / I NPUT I D

AUTO I NPUT

PLUS

SET UP

A IR / CABLE

CH SEARCH

CH MEMORY

EZ SETUP

CH SETT I NG

STOP START

PLEASE WA I T

125

AUTO PROGRAMM I NG

START

STOP START

SETUP?EZ

OR CA BL E.CONNECT AN TENNA

1 2 3

4 5 6

7 8 9

100

MENU MUTE

FLASHBACK

A B C D

ENTER

PERSONAL PREFERENCE

VOL

—

VOL

SLEEP T IMER

AUD I O SEL ECT

CLOSED CAPT ION

PARENT CONTROL

ENERGY

SET UP

SAVE

V IDEO ADJUST

VOL

—

VOL

—

VOL

—

VOL

(START)

(STOP)

VOL

—

32C530(27-28) 1/29/03, 2:25 PM27

Dimension: 140 X 215 mm

Set Up (Continued)

H Channel Setting

If EZ SETUP does not memorize all the channels in your region, follow the instructions below

to manually memorize the channel.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

3 Press VOL k/l to access the SET UP screen.

4 Press CH a/s to move the “E” mark to “CH SETTING”.

5 Press VOL k/l to access the CH SETTING screen.

6 Press CH a/s to move the “E” mark to “AIR/CABLE”, then press

VOL k/l to access the AIR/CABLE screen.

7 Press CH a/s to move the “E” mark to the desired mode.

8 Press MENU to exit.

Note:

• Receivable channels of your TV set are:

AIR channels: CABLE channels:

VHF: 2 through 13. 1 (HRC and IRC mode only)

UHF: 14 through 69. 2 through 125 (STD, HRC and IRC)

(MAIN MENU screen)

(CH SETTING screen)

(SET UP screen)

(AIR/CABLE screen)

→

BLUE SCREEN

SCREEN FORMAT

PERSONAL PREF.

UN I VERSAL

LANGUAGE

CH SETT ING

CH / I NPUT I D

AUTO I NPUT

PLUS

SET UP

A IR / CABLE

CH SEARCH

CH MEMORY

EZ SETUP

CH SETT I NG

CABLE

A IR / CABLE

CABLE HRC

CABLE IRC

AIR

STD

AIR

CABLE STD

CABLE HRC CABLE IRC

A IR / CABLE

CH SEARCH

CH MEMORY

EZ SETUP

CH SETT I NG

SLEEP T IMER

AUD I O SEL ECT

CLOSED CAPT ION

PARENT CONTROL

ENERGY

SET UP

SAVE

V IDEO ADJUST

VOL

—

VOL

—

VOL

—

VOL

32C530(27-28) 1/29/03, 2:25 PM28

Dimension: 140 X 215 mm

•

Saving broadcast TV channels into memory

1 Press MENU to access the MAIN MENU

screen, then press CH a/s to move the “E”

mark to “SET UP”.

2 Press VOL k/l to access the SET UP

screen, then press CH a/s to move the “E”

mark to “CH SETTING”.

3 Press VOL k/l to access the CH SETTING

screen.

4 Press CH a/s to move the “E” mark to “CH

SEARCH”, then press VOL k/l to access

the CH SEARCH screen.

To start:

Press VOL k. The tuner will search through

all available channels in your area and add

them into the TV memory.

To stop:

Press VOL l. CH SEARCH will stop at the

current channel and will not add any higher

channels.

5 Press MENU to exit.

Note:

• If you press VOL k again while in the CH SEARCH mode, auto-

program will start again, and the previously memorized channels will

be lost.

•

Adding weak or additional channels or erasing unwanted channels from TV memory

1 Press MENU to access the MAIN MENU

screen, then press CH a/s to move the “E”

mark to “SET UP”.

2 Press VOL k/l to access the SET UP

screen, then press CH a/s to move the “E”

mark to “CH SETTING”.

3 Press VOL k/l to access the CH SETTING

screen, then press CH a/s to move the “E”

mark to “CH MEMORY”.

4 Press VOL k/l to access CH MEMORY.

5 Use CH a/s or REMOTE KEYPAD to select

each desired channel to add or erase.

(CH SETTING screen)

(CH SEARCH screen)

A IR / CABLE

CH SEARCH

CH MEMORY

EZ SETUP

CH SETT I NG

STOP START

CH SEARCH

AIR 10

A IR / CABLE

CH SEARCH

CH MEMORY

EZ SETUP

CH SETT I NG

→

(START)

(STOP)

→

321

654

987

100

ENTER

VOL

—

VOL

—

VOL

—

VOL

—

VOL

—

VOL

—

VOL

—

VOL

Set Up (Continued)

32C530(29-30) 1/29/03, 2:25 PM29

Dimension: 140 X 215 mm

6 Press VOL k to add a channel to the TV

memory or press VOL l to erase a channel

from the TV memory.

7 Press MENU to exit.

H BLUE SCREEN

Automatically turns the screen blue if a broadcast signal is not

received. After 15 minutes of non-reception, the TV will turn off

automatically.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

3 Press VOL k/l to access the SET UP screen.

4 Press VOL k/l to access the BLUE SCREEN select screen.

5 Press VOL k/l to select “ON”.

VOL k

To add channel 10 to

the TV memory

VOL l

To erase channel 10 from

the TV memory

(CH MEMORY

memorized channel)

(CH MEMORY

unmemorized channel)

AIR

ERASE ADD

MEMORYCH

AIR

ERASE ADD

MEMORY

(MAIN MENU screen)

(SET UP screen)

(BLUE SCREEN select screen)

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL

LANGUAGE

CH SETT ING

CH / I NPUT I D

AUTO I NPUT

PLUS

SET UP

SCREEN FORMAT

BLUE SCREEN : OFF

BLUE SCREEN : ON

VOLUME

(

)/(

)

CHANNEL

UP (

DOWN (

)

→

1 2 3

4 5 6

7 8 9

100

POWER

MENU MUTE

FLASHBACK

DISPLAY

INPUT

VOL

—

VOL

ENTER

A B C D

PERSONAL PREFERENCE

DVD

VCR

CATV TV

DVD VCR

SLEEP T IMER

AUD I O SEL ECT

CLOSED CAPT ION

PARENT CONTROL

ENERGY

SET UP

SAVE

V IDEO ADJUST

VOL

—

VOL

—

VOL

—

VOL

Set Up (Continued)

VOL

—

VOL

32C530(29-30) 1/29/03, 2:25 PM30

Dimension: 140 X 215 mm

6 Press MENU to exit.

When the BLUE SCREEN is set to “ON”

Note:

• Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function

despite the presence of a broadcast signal. To continue watching TV under these conditions, switch

the BLUE SCREEN “OFF”.

• While INPUT 1, 2, or 3 (COMPONENT) is selected, the BLUE SCREEN will not be shown even if

BLUE SCREEN is turned on.

Set Up (Continued)

No signal

after 15

minutes

Power turns off

automatically

Blue screen

Standby mode

32C530(31-33) 1/29/03, 2:26 PM31

Dimension: 140 X 215 mm

CH/Input ID

•

You can assign an ID label to each channel or input mode. These

ID labels can be 4 characters long maximum and will be displayed

along with the channel number/input mode when the labeled

channel is selected.

(Example: labeling air channel 10 “TV12”.)

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

3 Press VOL k/l to access the SET UP screen then press

CH a/s to move the “E” mark to “CH/INPUT ID” .

4 Press VOL k/l to access the CH/INPUT ID screen.

→

(MAIN MENU screen)

(SET UP screen)

(CH/INPUT ID screen)

SLEEP T IMER

AUD I O SEL ECT

CLOSED CAPT ION

PARENT CONTROL

ENERGY

SET UP

SAVE

V IDEO ADJUST

SLEEP T IMER

AUD I O SEL ECT

CLOSED CAPT ION

PARENT CONTROL

ENERGY

SET UP

SAVE

V IDEO ADJUST

VOL

—

VOL

—

VOL

CH I NPUT I D/

AIR 10

:____

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL

LANGUAGE

CH SETT ING

CH / I NPUT I D

AUTO I NPUT

PLUS

SET UP

SCREEN FORMAT

1 2 3

4 5 6

7 8 9

100

MENU MUTE

FLASHBACK

A B C D

ENTER

PERSONAL PREFERENCE

VOL

—

VOL

VOLUME

(

)/(

)

CHANNEL

UP (

DOWN (

)

REMOTE

KEYPAD

32C530(34-37) 1/29/03, 2:26 PM35

Dimension: 140 X 215 mm

CH/Input ID (Continued)

5 Use CH a/s or REMOTE KEYPAD to select each desired channel

to label.

Press INPUT on the Remote to label the INPUT mode.

ID: Labeling the channel name

Press VOL k/l to select “ID” then press VOL k to select the

first character. Press CH a/s to enter a desired letter. Press

VOL k/l to enter the next desired letter. Press MENU to return

to the CH/INPUT ID screen.

Selectable characters:

Space: _

Alphabets: A-Z

Numbers: 0-9

Symbols: — . & ( ) / +

RESET: Resetting the ID to “_ _ _ _”

Press CH a/s to move the “E” mark to “RESET”, then press

VOL k/l. The previously set ID will return to “_ _ _ _”.

6 Press MENU to exit.

Note:

• The maximum number of ID labels available to register channel names is 20 for AIR channels and 40

for CABLE channels.

• If you wish to register a new ID when all the available ID labels are assigned, delete a registered ID

to make room.

VOL

—

VOL

RESET

: T V1 2

MENU : RETURN

RESET

: _ __ _

MENU : RETURN

→

VOL

—

VOL

→

321

654

987

100

ENTER

VOL

—

VOL

RESET

: _ __ _

MENU : RETURN

RESET

: T V1 2

MENU : RETURN

VOL

→

(ID Input screen)

Example TV 12

32C530(34-37) 1/29/03, 2:26 PM36

Dimension: 140 X 215 mm

Screen Format

•

The format of the picture can be adjusted to either of the two

screen formats.

(This function allows you to view 16:9 pictures recorded on DVD

or by camcorders that are once saved using the 4:3 aspect ratio

to be played back in the original high-density 16:9 format.)

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

3 Press VOL k/l to access the SET UP screen, then press

CH a/s to move the “E” mark to “SCREEN FORMAT”.

4 Press VOL k/l to access the SCREEN FORMAT select screen.

5 Press CH a/s to select “4:3” or “16:9”.

6 Press MENU to exit.

Note:

The 16:9 screen format will be cancelled when the power is turned off.

VOL

—

VOL

→

SLEEP T IMER

AUD I O SEL ECT

CLOSED CAPT ION

PARENT CONTROL

ENERGY

SET UP

SAVE

V IDEO ADJUST

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL

LANGUAGE

CH SETT ING

CH / I NPUT I D

AUTO I NPUT

SCREEN FORMAT

PLUS

SET UP

(MAIN MENU screen)

(SET UP screen)

4 : 3

1 6 : 9

SCREEN FORMAT

(SCREEN FORMAT select screen)

4 : 3

1 6 : 9

SCREEN FORMAT

VOL

—

VOL

→

1 2 3

4 5 6

7 8 9

100

MENU MUTE

FLASHBACK

A B C D

ENTER

PERSONAL PREFERENCE

VOL

—

VOL

VOLUME

(+)/(–)

CHANNEL

UP (8)/

DOWN (9)

REMOTE

KEYPAD

32C530(34-37) 1/29/03, 2:26 PM37

Dimension: 140 X 215 mm

(Front connection

terminals of TV)

To AUDIO OUTPUT (R)

To AUDIO OUTPUT (L)

To VIDEO

OUTPUT

(Rear connection

terminals of TV)

To VIDEO OUTPUT

To AUDIO OUTPUT (R)

To AUDIO OUTPUT (L)

To VIDEO OUTPUT

To AUDIO OUTPUT (L)

To AUDIO OUTPUT (R)

DVD

CAMCORDER

TV GAME

VCR

Yellow : To video input terminal

White : To audio input (L) terminal

Red : To audio input (R) terminal

Using the Video and Audio Input Terminals

VIDEO EQUIPMENT

•

Connecting video equipment for playback of video material.

• To view video material from external video equipment, make sure to connect the equipment properly

to the input terminals on the TV set.

Connecting video device equipped with video output terminals

CONNECTIONS

32C530(38-40) 1/29/03, 2:26 PM38

Dimension: 140 X 215 mm

Using the Video and Audio Input Terminals (Continued)

•

To watch video material playback

• Press the Remote’s INPUT button to select the VIDEO INPUT mode for the video equipment you

wish to play.

• The external VIDEO INPUT mode will change as follows each time the INPUT button is pressed.

• When the AV cables are connected to the VIDEO INPUT 3 and COMPONENT Y, PB and PR terminals

simultaneously, the COMPONENT terminal has priority over the VIDEO terminal.

• INPUT mode can be selected by pressing either the CH a on the TV remote control when the TV is

set to the highest channel stored in memory, or by pressing the CH s when it is set to the lowest

channel.

• When connecting video or audio equipment to the television, be sure that the power is turned off in

order to prevent damage to either the television or the equipment being connected.

• The S-Video terminal has priority over the VIDEO terminal (IN 1). When you wish to use video equipment

connected to the VIDEO terminal (IN 1), unplug equipment connected to the S-VIDEO terminal.

• It is the intent of SHARP that this product be used in full compliance with the copyright law of the

United States and that prior permission be obtained from copyright owners whenever necessary.

• For detailed information on the connection and use of auxiliary equipment, refer to the instruction

manuals of the equipment being used.

• The connection cables/cords can be obtained from your local video store.

AIR

CABLE

INPUT 1

(IN 1)

Rear

INPUT 2

(IN 2)

Front

INPUT 3 (COMPONENT)

(IN 3)

Rear

Note:

VCR

(Rear connection terminals of TV)

TO S-VIDEO OUTPUT

(When your video equipment

has an S-VIDEO output terminal).

To AUDIO

OUTPUT (L/R)

To COMPONENT

VIDEO OUTPUT

Terminals

To AUDIO OUTPUT (L)

To AUDIO OUTPUT (R)

To VIDEO OUTPUT

Video Equipment with Component

video (Component Color)

Output Terminals (Y, PB and PR)

Notes:

• COMPONENT terminals are DVD compatible, allows you to enjoy the highest quality playback

image than the image from IN 1 S-VIDEO terminal.

• The IN 1 S-VIDEO terminal is used to obtain a higher quality image by importing image signals.

• The S-VIDEO terminal is for the video image only. To receive an audio signal, connect the audio

cable to the IN 1 AUDIO terminals (left and right).

32C530(38-40) 1/29/03, 2:26 PM39

Dimension: 140 X 215 mm

Using the Audio Output Terminals

Stereo Amplifier

Speaker System

To the audio

input terminals

•

These terminals are used for connecting an external audio amplifier. The STEREO/MONO/

SAP, VOLUME, MUTE and FAO functions can all be controlled via the television’s remote control

or directly on the TV itself. These terminals relay the audio signal of all programs being displayed

on the TV screen.

(AUDIO OUTPUT terminals are located on the rear of the cabinet.)

CONNECTIONS

(Rear connection terminals of TV)

Plug adapter

Pin jack/Mini plug

To the equipment

being connected

Pin plug x 2 Pin Plug

To the TV

(1) Before connecting the cables, turn on the TV and adjust the TV volume for a moderate listening level.

(2) Turn off the TV and connect the audio cables to the AUDIO LINE OUTPUT terminals on the TV.

(3) Turn the TV set and stereo amplifier on.

(4) If you desire, you can turn off the sound of the TV’s internal speakers by accessing the TV’s AUDIO

SELECT screen. See pages 12, 13.

(5) Adjust the volume control on the stereo amplifier to a moderate listening level.

(6) Control of the audio can be adjusted using the audio controls (STEREO/MONO/SAP, VOLUME,

MUTE and FAO), from either the remote control, or directly from the TV set.

Note:

• For detailed information on the connection and use of auxiliary equipment, refer to the operation

manuals of the equipment being used.

• When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio

connection cord and plug adaptor as shown below.

• When FAO is set to “OFF”, we recommend you to keep the TV’s audio output level high for optimal

sound quality. (see page 12.)

32C530(38-40) 1/29/03, 2:26 PM40

Dimension: 140mm x 215mm

MODEL 32C530

Receiving System NTSC

Stereo Broadcast MTS/SAP

Reception Channels

AIR VHF 2-13 ch

UHF 14-69 ch

CATV 1-125 ch

Channel Tuning 181-channel Reception PLL tuning system

Antenna Input Impedance VHF/UHF 75 ohm Unbalanced

Screen Size 32˝ Diagonally Measured

Terminals Audio/Video input x 3 (Front x 1, Rear x 2)

S-Video input x 1 (Rear)

COMPONENT x 1 (Rear)

Audio output x 1 (Rear)

Sound Output 5.0 W (RMS) x 2

Power Source AC 120 V, 60 Hz

Power Consumption 135 W

Dimensions 33

/64˝ (W) x 26

/64˝ (H) x 21

/8˝ (D)

[(W) x (H) x (D)] mm [860 mm (W) x 675 mm (H) x 543 mm (D)]

Weight (approx.) 70.5 Ibs. (32 kg)

Specifications

• Design and specifications are subject to change without notice.

32C530(46-47) 2/6/03, 11:28 AM47

Dimension: 140mm x 215mm

ADVERTENCIA - Las Normas de la FCC establecen que cualquier cambio o modificación no autorizada que

se realice en este equipo y que no esté expresamente aprobado por el fabricante podría anular la autoridad

del usuario para utilizar este equipo.

DESECHO DEL PRODUCTO

Este producto utiliza un Tubo de rayos catódicos (TRC) que contiene soldadura de estaño y plomo.

El desecho de estos materiales deberá ser considerando regulaciones ambientales. Para obtener

información sobre el desecho o el reciclado, póngase en contacto con las autoridades locales o con

Electronics Industries Alliance: www.eiae.org

INFORMACIÓN IMPORTANTE (Continuación)

PRECAUCIÓN: No coloque el cable de alimentación de CA debajo del televisor u otro elemento pesado.

MEDIDAS DE SEGURIDAD IMPORTANTES

PRECAUCIÓN : Lea por favor todas estas instrucciones antes de poner en funcionamiento

su televisor, y guárdelas para poder utilizarlas en el futuro.

La energía eléctrica permite realizar muchas funciones útiles. Este aparato ha sido diseñado y fabricado para

garantizar su seguridad física. Sin embargo, UNA UTILIZACIÓN INAPROPIADA PODRÍA SER LA CAUSA DE

DESCARGAS ELÉCTRICAS O INCENDIOS. Para mantener el buen funcionamiento de este equipo y evitar

problemas, siga las normas básicas indicadas a continuación cuando lo instale, utilice o repare.

1. Desenchufe el televisor del tomacorriente antes de limpiarlo.

2. No utilice líquidos ni aerosoles de limpieza. Para limpiar el televisor utilice un paño húmedo.

3. No utilice accesorios que no los recomiende el fabricante del televisor porque podrían causar peligros.

4. No utilice el televisor cerca del agua – por ejemplo, cerca de una bañera, lavado, fregadero o lavadora, en

un sótano húmedo, cerca de una piscina, etc.

5. No utilice este televisor sobre un carrito, un soporte o una mesa inestables. El televisor podría caerse

causando serías heridas a niños o adultos, y, por supuesto, el aparato se estropearía. Ponga el televisor

solamente sobre un carrito o soporte recomendado por el fabricante, o vendido junto con

el televisor.

6. La combinación de carrito y televisor debe moverse con mucho cuidado. Las paradas

rápidas, la fuerza excesiva y las superficies irregulares pueden ser la causa de que la

combinación de televisor y carrito se volteen.

7. Cuando instale el televisor en una pared o en una estantería siga las instrucciones del

fabricante, y utilice el kit de montaje aprobado por el fabricante.

8. Las ranuras y aberturas de la caja y del panel posterior o inferior sirven para la ventilación del aparato, para

que éste funcione bien y para evitar que se caliente. Estas aberturas no deben taparse nunca. Este televisor

no debe colocarse en un lugar cerrado (como un estante para libros) si éste no dispone de la ventilación

apropiada.

9. Las aberturas no deben taparse nunca con un paño u otro material; y las aberturas del panel inferior no

deben taparse tampoco colocando el televisor sobre una cama, sofá, alfombra u otra superficie similar.

Este televisor no debe ponerse nunca cerca o encima de un radiador u otro aparato que produzca calor.

10. Este televisor sólo debe funcionar con la fuente de corriente indicada en la etiqueta del fabricante. Si no

está seguro acerca del tipo de corriente de su hogar, póngase en contacto con el concesionario de quien

adquirió el televisor o con la compañía eléctrica local.

En el caso de equipos de televisión diseñados para funcionar con baterías, consulte las instrucciones de

uso.

11. Como medida de seguridad, el equipo de televisión está equipado con un enchufe polarizado de dos hilos.

El enchufe polarizado de dos hilos solamente calza de una sola manera en el tomacorriente.

Si el enchufe no entra en el tomacorriente, pídale a un electrícista que le coloque un tomacorriente nuevo.

No modifique el enchufe porque anulará esta característica de seguridad.

12. No permita que se apoye nada sobre el cable de alimentación. No ponga este televisor donde el cable

pueda ser deformado por personas que caminen sobre él.

32C530(48-50) 1/29/03, 2:45 PM49

Dimension: 140mm x 215mm

MEDIDAS DE SEGURIDAD IMPORTANTES

(Continuación)

13. Cumpla con todos los avisos y las instrucciones marcados en el televisor.

14. Si hay una antena exterior conectada al televisor, asegúrese de que el sistema de antena está conectado

a tierra, para obtener así cierta protección contra la sobretensión y contra las cargas de electricidad

estática acumulada.

EJEMPLO DE CONEXIÓN A TIERRA DE UNA

ANTENA SEGÚN EL CÓDIGO ELÉCTRICO NACIONAL.

NEC- NATIONAL ELECTRICAL CODE (CÓDIGO ELÉCTRICO NACIONAL)

15. Para proteger aún más este televisor durante tormentas eléctricas o cuando se deje sin atender y sin

utilizar durante largos periodos de tiempo, desenchufe el cable de alimentación del tomacorriente y

desconecte la antena. Esto evitará que el aparato pueda estropearse debido a los relámpagos y la

sobretensión en la línea de alimentación.

16. Un sistema de antena exterior no debe ubicarse cerca de líneas de alimentación elevadas, ni cerca de

luces eléctricas o circuitos de alimentación. Tampoco debe ubicarse donde pueda caer sobre tales líneas

o circuitos de alimentación. Cuando instale un sistema de antena exterior, tenga muchísimo cuidado

para no tocar las líneas o circuitos de alimentación porque el contacto podría causar un accidente mortal.

17. No sobrecargue los tomacorrientes ni los cables de extensión porque esto podría causar un incendio o

descarga eléctrica.

18. No meta nunca ningún objeto en el interior del televisor porque podría tocar piezas con alta tensión o

causar un cortocircuito con otras piezas causando un incendio o descarga eléctrica. No derrame nunca

ningún tipo de líquido sobre el televisor.

19. No trate de reparar el televisor usted mismo porque al abrir o quitar las tapas podría exponerse a una

descarga de tensión u otros peligros. Las reparaciones debe realizarlas el personal de servicio CALIFICADO.

20. Desenchufe este televisor del tomacorriente y solicite el servicio de un técnico calificado cuando se

produzcan las condiciones siguientes:

A. Cuando el cable de la alimentación o el enchufe estén estropeados.

B. Cuando haya derramado un líquido sobre el televisor.

C. Si el televisor ha quedado expuesto a la lluvia o al agua.

D. Si el televisor no funciona normalmente siguiendo las instrucciones de utilización. Ajuste solamente

los controles indicados en las instrucciones de utilización. Un ajuste inadecuado de otros controles

podría estropear el aparato y, entonces, sería necesario acudir a un técnico CALIFICADO para que

éste lo repare y lo devuelva a su condición normal.

E. Si el televisor se ha caído o la caja se ha estropeado.

F. Cuando las prestaciones del televisor cambien considerablemente será necesario llamar al servicio

de reparaciones.

21. Al finalizar cualquier servicio o reparación de este televisor, pida al técnico de servicio que realice

comprobaciones de seguridad rutinarias para determinar si el televisor puede funcionar sin causar ningún

problema.

22. Cuando sea necesario cambiar piezas, cerciórese de que el técnico de servicio utiliza las piezas de

CAMBIO especificadas por el fabricante, aquellas que tengan las mismas características que las piezas

originales. Las piezas de recambio no autorizadas pueden causar incendios, descargas eléctricas u

otros peligros.

BAJADA DE ANTENA

ABRAZADERA PARA PUESTA A TIERRA

UNIDAD DE DESCARGA DE ANTENA

(SECCIÓN 810-20 DEL NEC)

CONDUCTORES DE PUESTA A TIERRA

(SECCIÓN 810-21 DEL NEC)

ABRAZADERAS PARA PUESTA A TIERRA

SISTEMA DE ELECTRODOS DE PUESTA A TIERRA DEL SERVICIO

ELÉCTRICO (PARTE 250. PARTE H DEL NEC)

EQUIPO DE

SERVICIO

ELÉCTRICO

32C530(48-50) 1/29/03, 2:45 PM50

Dimension: 140mm x 215mm

Antes de llamar al servicio de reparaciones

Verifique estos puntos para ver si usted mismo puede solucionar el problema.

(Imagen oscura y en blanco)

Nota:

• Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la

pantalla puede ponerse en blanco y negro. Si ocurriera ésto, ponga el

modo CLOSED CAPTION en OFF.

Solicitud de servicio técnico

Para la localización del Servicio Técnico Autorizado de Sharp más próximo o para conseguir material de

información, repuestos o asistencia técnica, llame a 1-800-BE-SHARP.

XXXXXXXXXXXXXXXXX X

X XXXXXXXXXXXXXX XX X

X X XXXXXXXXXXXXX XX X

XXXXXXXXXX X X X X X XX X

XXXXXXXXXXXXXX X XX X

XXXX X X X X X XX X XXXX X X

X X XXXXXXXXXXXXX XX X

XXXXXXX XXXXXXXXX X X

X X XXXXXXX XX XX XXX X X

XXXXXXXXXXXXXXXXX X

XXX XXXXXXXXXXXXX X X

X X XXXXXXXXXXXXX XX

X X XXXXXXXXXXXXX XX X

X X XXXXXXXXXXXXXX XX

XXX XXXX X X XX XXXXX X X

POSIBLE SOLUCIÓN

Pruebe con otro canal y si todo está

bien, el problema puede ser de la

emisora.

Está conectado el televisor?

Llega electricidad al tomacorrientes?

Está conectado el interruptor del

televisor?

Está conectado la antena al terminal del

panel posterior del televisor?

Si utiliza una antena exterior, cerciórese

de que el cable no esté dañado.

Compruebe si hay interferencia local.

Desconecte el interruptor POWER y

vuelva a conectarlo después de

transcurrir un minuto.

Ajuste el control de COLOR.

Ajuste el control de MATIZ.

Verifique los productos externos de

Video/Audio, revise si hay fugas de

conexiones sueltas o rotas.

Compruebe el estado de las pilas del

mando a distancia.

Deslice CATV/DVD-TV/VCR selector

para situarlo sobre la posición TV.

Están bien conectados los cables de

sonido? Compruebe el nivel del volumen.

Está conectado el altavoz?

Desactive (OFF) el modo CLOSED

CAPTION / Desactive (OFF) el modo

Ahorro de Energía (Energy Save).

Desenchufe el televisor y vuelva a

enchufarlo despúes de dos minutos o más.

LISTA DE

COMPROBACIONES

DE SERVICIO

RAPIDO

PROBLEMA

El vídeo o el reproductor de discos de

video no reproducen im

ágenes

El equipo de video/audio externo no

produce imágenes ni sonido

El mando a distancia no funciona

Barras en la pantalla

Imagen distorsionada

La imagen se desplaza verticalmente

No hay color

Mala recepción de algunos canales

Imagen débil

Franjas en la imagen

Imagen fantasma

Imagen borrosa

Sonido adecuado, imagen mala

Imagen adecuada, sonido malo

No hay imagen ni sonido

Imagen oscura y en blanco

Interferencia de ruido el

éctrico externo

con el funcionamento del televisor

El color se ve distorsionado en parte de

la pantalla

32C530(51-52) 1/29/03, 2:45 PM52

Dimension: 140mm x 215mm

Lisez attentivement ces instructions et gardez-les à proximité pour toute référence ultérieure.

IMPORTANT

Afin de vous aider en cas de perte ou de vol, inscrivez les

numéros de série et de modèle du téléviseur dans les

espaces fournis à cet effet. Ces numéros sont situés à

l’arrière du téléviseur.

N° du modèle :

N° de série :

(FRANÇAIS)

INFORMATIONS IMPORTANTES

Deux raisons importantes d’enregistrer rapidement la garantie de votre nouveau téléviseur SHARP à

l’aide de la carte d’enregistrement (REGISTRATION CARD) incluse dans le colis :

LA PREMIERE – LA GARANTIE

Grâce à elle, vous obtiendrez immédiatement les avantages client concernant la garantie des pièces, du

service et des travaux applicable à votre achat.

LA DEUXIEME – LA LOI SUR LA SECURITE DU PRODUIT DE CONSOMMATION (CONSUMER

PRODUCT SAFETY ACT)

Grâce à elle, vous recevrez rapidement un avis de sécurité lors du contrôle, de la modification ou du rappel de votre

produit que SHARP peut être amené à fournir conformément à la loi de 1972 sur la sécurité du produit de consommation.

LISEZ ATTENTIVEMENT LE PARAGRAPHE «GARANTIE LIMITEE» DE LA DERNIÈRE PAGE.

ENERGY STAR

: QU’EST-CE QUEC’EST

Les téléviseurs et les magnétoscopes utilisent de l’énergie lorsqu’ils sont allumés et éteints. Les Américains dépensent

plus d’1 milliard de dollars par an en énergie consommée par les téléviseurs et les magnétoscopes une fois éteints. Les

nouveaux modèles ENERGY STAR

réduisent jusqu’à 75 % ce gaspillage d’énergie. Ce qui représente finalement

plus de 500 millions de dollars par an d’économie d’énergie pour les consommateurs.

Ces économies aident à réduire la combustion des énergies fossiles et la pollution au gaz carbonique associée, qui

contribue au réchauffement de la planète. Si toutes les familles américaines remplaçaient leurs téléviseurs et leurs

magnétoscopes par des modèles ENERGY STAR

, les émissions de gaz carbonique seraient réduites de cinq millions

de tonnes par an — ce qui reviendrait à éliminer la pollution émise par plus d’un million de voitures.

En utilisant les produits ENERGY STAR

, vous économiserez également de l’argent sur vos factures d’électricité et

vous utiliserez moins d’énergie. Un peu de bon sens économique au profit de notre environnement !

AVERTISSEMENT:

POUR REDUIRE LE RISQUE D’INCENDIE OU D’ELECTROCUTION,

N’EXPOSEZ PAS CET EQUIPEMENT A DES ENDROITS TRES HUMIDES.

ATTENTION : POUR REDUIRE LE RISQUE

D’ELECTROCUTION,

NE RETIREZ PAS LE CAPOT (OU LE PANNEAU ARRIERE).

L’APPAREIL NE CONTIENT AUCUNE PIECE A ENTRETENIR

PAR L’UTILISATEUR.

CONSULTEZ UN PERSONNEL QUALIFIE POUR

LA MAINTENANCE.

Le symbole de la foudre sous

forme de flèche dans un triangle

est supposé indiquer à

l’utilisateur que les pièces

internes au produit constituent

un risque d’électrocution.

Le symbole du point d’exclamation

dans un triangle est supposé

indiquer à l’utilisateur que des

instructions de fonctionnement et

de maintenance importantes se

trouvent dans la documentation

fournie avec l’équipement.

“Note à l’intention de l’installateur du système CATV : Ce rappel est fourni afin d’attirer l’attention de l’installateur

de système CATV sur l’article 820-40 du National Electrical Code qui indique les règles de mise à la terre

appropriée et, en particulier, spécifie que la ligne de terre doit être connectée au réseau commun de mise à

la terre du bâtiment, au point le plus proche possible de la source.”

32C530(53-55) 1/29/03, 2:45 PM53

Dimension: 140mm x 215mm

Notes

32C530(58-60) 1/29/03, 2:45 PM58

Dimension: 140mm x 215mm

TO OBTAIN ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharpusa.com

Limited Warranty

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp

brand product (the “Product”), when shipped in its original container, will be free from defective

workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the

defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser

for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product nor to the additional excluded

item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which

has been subjected to improper voltage or other misuse, abnormal service or handling, or which has

been altered or modified in design or construction.

In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth

below and provide proof of purchase to the servicer.

The limited warranty described herein is in addition to whatever implied warranties may be granted to

purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE

OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied

warranty lasts, so the above limitation may not apply to you.

Neither the sales personnel of the seller nor any other person is authorized to make any warranties

other than those described herein, or to extend the duration of any warranties beyond the time period

described herein on behalf of Sharp.

The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall

be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and

for the period of time described herein, shall constitute complete fulfillment of all liabilities and

responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction

of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp

be liable or in any way responsible, for any damages or defects in the Product which were caused by

repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be

liable or in any way responsible for any incidental or consequential economic or property damage.

Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion

may not apply to you.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS

WHICH VARY FROM STATE TO STATE.

Model Specific Section

Your Product Model Number & Description: 32C530, 32 inch Color Television (Be sure to have

this information available when you need service for

your Product.)

Warranty Period for this Product: One (1) year parts and labor. The warranty period

continues for an additional one (1) year, for a total

of two (2) years, with respect to the picture tube(s)

in the Product for parts only. Labor and service are

not provided free of charge for this additional period.

Additional Item(s) Excluded from Non-rechargeable batteries.

Warranty Coverage (if any):

Where to Obtain Service: From a Sharp Authorized Servicer located in the

United States. To find the location of the nearest

Sharp Authorized Servicer, call Sharp toll free at 1-

800-BE-SHARP.

What to Do to Obtain Service: Contact your Sharp Authorized Servicer to obtain

in-home service for this Product. The Servicer will

come to your home and if it is necessary to remove

the Product, the Servicer will reinstall it. Be sure to

have Proof of Purchase available.

32C530(58-60) 1/29/03, 2:45 PM59

Printed in Mexico

TINS-A775WJZZ

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-2135

32C530(58-60) 1/29/03, 2:45 PM60

Sharp 32C530 Operation Manual Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info