13169
1
Verklein
Vergroot
Pagina terug
1/59
Pagina verder
1
COLOR TELEVISION
MODEL
20F540
L OPERATION MANUAL L
B191 WJ
CONTENTS
PAGE
IMPORTANT INFORMATION/IMPORTANT
SAFEGUARDS .................................................. 2 ~ 4
Supplied Accessories .............................................. 5
Before Operating Your Television ............................. 5
Antenna Connections ........................................ 5 ~ 6
Quick Reference Control Operation ................... 7 ~ 8
EZ SETUP during First Use..................................... 9
Demo Mode ........................................................... 10
Accessing the MAIN MENU screen without
Remote Control...................................................... 10
Language ............................................................... 11
Sleep Timer ........................................................... 12
Video Adjust .......................................................... 13
Audio Adjust........................................................... 14
Audio Select................................................... 15 ~ 16
MTS (Multichannel TV Sound) ............................ 15
INTERNAL SPEAKER SWITCH ......................... 15
FAO (Fixed Audio Output) ................................... 15
PAGE
Closed Caption ...................................................... 17
Parental Control ............................................. 18 ~ 28
V-CHIP ........................................................ 18 ~ 25
View Timer .................................................. 26 ~ 28
Ch Setup ........................................................ 29 ~ 34
EZ Setup ............................................................. 29
Channel Setting .......................................... 30 ~ 32
Personal Preference ........................................... 33
Universal Plus Function ...................................... 34
Set Up ............................................................ 35 ~ 36
Energy Save ....................................................... 35
Blue Screen ........................................................ 36
Using the Video and Audio Input Jacks ......... 37 ~ 38
Using the Audio Output Jacks ............................... 39
Operation of Remote Control ......................... 40 ~ 43
Before Calling for Service ...................................... 44
Calling for Service ................................................. 44
Specifications ........................................................ 45
Limited Warranty .................................................... 59
This operating manual includes basic operating
instructions in Spanish and French.
SPANISH is on page 46 ~ 51.
FRENCH is on page 52 ~ 57.
2
Dimension: 140mm x 215mm
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television
– built for outstanding quality, reliability and performance.
Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed
through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL
so that you may adjust the picture and color to your personal viewing preference.
We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color
Television set for years to come.
Please read these instructions carefully, and keep them handy for your future reference.
Model No.:
Serial No.:
IMPORTANT
To aid reporting in case of loss or theft, please record the TV’s
model and serial numbers in the space provided. The numbers
are located at the rear of the TV.
IMPORTANT INFORMATION
There are two important reasons for prompt warranty registration of your new SHARP television set. Use
the REGISTRATION CARD packed in with the set.
FIRST – WARRANTY
This is to assure that you will immediately receive the full consumer benefit of the parts, service and labor
warranty applicable to your purchase.
SECOND – CONSUMER PRODUCT SAFETY ACT
To assure that you will promptly receive any safety notification on inspection, modification or recall that
SHARP may be required to give under the 1972 Consumer Product Safety Act. PLEASE READ
CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE ON THE LAST PAGE.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO WET LOCATIONS.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with
arrowhead within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to
persons.
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are
in the papers with the
appliance.
Note to CATV system installer: This reminder is provided to call the CATV system installers attention
to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical.
WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not
expressly approved by the manufacturer could void the users authority to operate this
equipment.
PRODUCT DISPOSAL
This product utilizes a Cathode Ray Tube (CRT) containing lead and tin-lead solder.
Disposal of these materials may be regulated due to environment considerations. For disposal or
recycling information, please contact your local authorities or the Electronics Industries Alliance:
www.eiae.org
20F540 2
3
Dimension: 140mm x 215mm
IMPORTANT INFORMATION (Continued)
CAUTION:
Do not place the AC power cord under the TV set or other heavy items.
To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
To prevent fire or shock hazard, do not expose this products to dripping or splashing. No objects filled with
liquids, such as vases, should be placed on the product.
CAUTION: Please read all of these instructions before you operate your television and save
these instructions for later use.
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure
your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE
HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic
rules for its installation, use and servicing.
1. Unplug this television equipment from the wall outlet before cleaning.
2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3. Do not use attachments not recommended by the television equipment manufacturer as they may cause
hazards.
4. Do not use this television equipment near water for example, near a bath tub, washbowl, kitchen sink or
laundry tub, in a wet basement, or near a swimming pool, etc.
5. Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall, causing
serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand
recommended by the manufacturer or sold with the television equipment.
6. Television equipment and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the equipment and cart combination to
overturn.
7. Wall or shelf mounting should follow the manufacturers instructions, and should use a
mounting kit approved by the manufacturer.
8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To
insure reliable operation of the television equipment and to protect it from overheating, these openings must
not be blocked or covered. This television equipment should not be placed in a built-in insulation such as a
bookcase unless proper ventilation is provided.
9. The openings should never be covered with a cloth or other material, and the bottom openings should not
be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television
equipment should never be placed near or over a radiator or heat register.
10. This television equipment should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supplied to your home, consult your television dealer or local
power company.
For television equipment designed to operate from battery power, refer to the operating instructions.
11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger
than the other). The 2-wire polarized plug will fit only one way into the power outlet.
If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and defeat
this safety feature.
12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will
be abused by persons walking on it.
IMPORTANT SAFEGUARDS
20F540 3
4
Dimension: 140mm x 215mm
IMPORTANT SAFEGUARDS (Continued)
13. Follow all warnings and instructions marked on the television equipment.
14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded
so as to provide some protection against voltage surges and built-up static charges. Section 810 of the
National Electrical Code provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
15. For added protection for this television equipment during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent
damage to the equipment due to lightning and power-line surges.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact
with them might be fatal.
17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
18. Never push objects of any kind into this television equipment through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the television equipment.
19. Do not attempt to service this television equipment yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the television equipment.
C. If the television equipment has been exposed to rain or water.
D. If the television equipment does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the television equipment to normal operation.
E. If the television equipment has been dropped or the cabinet has been damaged.
F. When the television equipment exhibits a distinct change in performance this indicates a need for
service.
21. Upon completion of any service or repairs to this television equipment, ask the service technician to
perform routine safety checks to determine that the television is in safe operating condition.
22. When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC
SERVICE
EQUIPMENT
NECNATIONAL ELECTRICAL CODE
GROUND
CLAMP
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
20F540 4
5
5
Dimension: 140mm x 215mm
Before Operating Your Television
Location
For normal operation, your TV should be located in an area of the room where cool adequate ventilation
is provided. Do not place the back of the television set in a place where free airflow will be restricted.
Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys
using magnets or any other magnetic substance, such as iron are kept well away from the TV set.
Power
Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you
are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an
electrician. Do not defeat the safety feature of the polarized plug.
Note:
If the set will not be used for a long period, such as during a vacation, unplug the set from the wall
outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the
POWER BUTTON in the OFF position.)
• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located
near the TV and both radio and TV broadcasts are being received. Should such noise appear, turn
off either the TV or the radio.
If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received
due to interference from the TV.
L Before using the television, prepare the Remote Control
To use the remote control, insert batteries first.
Insert the batteries
With your thumbnail, pull up the slit as indicated by the arrow to remove the back cover. Insert two batteries
(size “AA”/1.5 V cc). Be sure to match the battery
e
/
d
terminals with the
e
/
d
marks inside the compartment.
Baterry
Cover
Antenna Connections
Antennas
The antenna requirements for good color television reception are more important than those for black
& white television reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various
antenna systems:
1. A 75 ohm system is generally a round cable with F-type
connector that can easily be attached to a terminal without
tools (not supplied).
2. A 300 ohm system is a flat “twin-lead” cable that can be
attached to a 75 ohm terminal through a 300-75 ohm
ADAPTOR (not supplied).
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
Pull up
20F540
Supplied Accessories
1
2
3
4
5
6
7
8
9
0
100
POWER
TV
DVD
VCR
MENU
MUTE
PAUSE
FLASHBACK
DISPLAY
INPUT
TV • CATV • VCR • DVD
STOP
REC
REW
PLAY
FF
CH/SKIP
VOL
CH
CH
VOL
+
ENTER
A
B
C
D
PERSONAL PREFERENCE
CATV TV
DVD VCR
Size AA
Dry Batteries
Infrared Remote Control
RRMCGA035WJSB
6
6
Dimension: 140mm x 215mm
Antenna Connections (Continued)
OUTDOOR ANTENNA CONNECTION
Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.
Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of
the TV set.
PR
PB
Y
IN 1
LINE
OUT
R
L
AUDIO
VIDEO
R
L
COMPONENT
REAR OF TV
75-ohm
coaxial cable
300-ohm
twin-lead
VHF/UHF ANTENNA
VHF/UHF ANTENNA
A. Combination VHF/UHF Antennas
300/75-ohm
ADAPTOR
(Not supplied)
or
P
R
P
B
Y
IN 1
LINE
OUT
R
L
AUDIO
VIDEO
R
L
COMPONENT
IN OUT
300-ohm
twin-lead
300-ohm
twin-lead
75-ohm coaxial
cable
VHF
ANTENNA
UHF
ANTENNA
COMBINER
(not supplied)
or
REAR OF TV
B. Separate VHF/UHF Antenna
NOTICE
F-type connector should be finger tightened only
When connecting the RF cable to the TV set, do not tighten
F-type connector with tools.
If tools are used, it may cause damage to your TV set.
(The breaking of Internal circuit, etc.)
F-type connector
75-ohm coaxial cable
CABLE TV (CATV) CONNECTION
A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.
Some cable TV companies offer premium pay channels. Since the signals of these premium pay
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by
the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled
channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,
consult your cable TV company.) For more specific instructions on installing cable TV, consult your
cable TV company. One possible method of utilizing the converter/descrambler provided by your
cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
A position on the RF switch (not supplied): You can view all unscrambled channels using the TVs
channel keys.
B position on the RF switch (not supplied): You can view the scrambled channels via the converter/
descrambler using the converters channel keys.
OUT
OUT
RF switch (not supplied)
Cable TV Line
IN
Two-set
signal
splitter
(not
supplied)
Cable TV converter/
descrambler
(not supplied)
A
IN
B
Note:
Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.
20F540
P
R
P
B
Y
IN 1
LINE
OUT
R
L
AUDIO
VIDE O
R
L
COM PO NE NT
P
R
P
B
Y
IN 1
L INE
OU T
R
L
AU DIO
VI DE O
R
L
C OMP ON EN T
7
Dimension: 140mm x 215mm
Quick Reference Control OperationQuick Reference Control Operation
Note:
COMPONENT (VIDEO) TERMINALS
Part Names
Front Panel
VIDEO/AUDIO
TERMINALS
IN 2
CHANNEL UP/DOWN
(a) Selects next higher channel.
(s) Selects next lower channel.
POWER
Press On.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
INSIDE DOOR
VOLUME UP/DOWN
(k) Increases sound.
(l) Decreases sound.
IN 1 (VIDEO/AUDIO) TERMINALS
LINE OUT (AUDIO) TERMINALS
REMOTE CONTROL
20F540 7
The TV set and remote control illustrations and the on-screen displays in this manual may differ from their actual
appearance.
To open the door
Using the projection located under the "PULL-OPEN" indication,
pull and lift the door open.
To close the door
Using the projection, lower the door until closed.
Caution:
When opening or closing the door, do not insert your fingers into
the gap between the door and front panel. This may result in an
injury.
Rear Panel
ANTENNA/CABLE INPUT
SENSOR
Press again Off.
TERMINAL
8
Dimension: 140mm x 215mm
Quick Reference Control Operation
Part Names
Quick Reference Control Operation (Continued)
20F540 8
Note:
The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
The degree of illumination will vary depending on the strength of lighting used.
The degree of illumination will decrease with time and depending on the temperature.
The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
Sunlight and fluorescent lighting are the most effective when charging the display.
The TV set and remote control illustrations and the on-screen displays in this manual may differ from their actual
appearance.
1
2
3
4
5
6
7
8
9
0
100
POWER
TV
MENU
MUTE
PAUSE
FLASHBACK
DISPLAY
INPUT
TV CATV VCR DVD
STOP
REC
REW
PLAY
FF
CH/SKIP
VOL
CH
CH
VOL
+
ENTER
A
B
C
D
PERSONAL PREFERENCE
DVD
VCR
CATV TV
DVD VCR
Basic Remote Control Functions
POWER
Press On.
Press again Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons. (See page 33.)
VOLUME UP/DOWN
(k) Increases sound.
(l) Decreases sound.
Changes or selects the TV
adjustments on On-Screen Display.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
DVD/VCR CONTROL
See page 40.
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, signals sent will be
for TV and VCR control.
In CATV/DVD position, signals sent will
be for cable TV converter and DVD
control.
Infrared Transmitter Window
DISPLAY
Press Displays receiving channel for
4 seconds.
Press again Removes display.
Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press Switches to external video
INPUT 1 mode.
Press twice Switches to external
video INPUT 2 mode.
Press 3 times Switches to external
video INPUT 3 mode or COMPONENT
mode.
Press 4 times Switches back to the
original TV mode. See page 38.
ENTER
Used in some instances where a Cable
Converter Box requires an “enter”
command after selecting channels,
when using the REMOTE KEYPAD
button. See page 40 .
CHANNEL UP/DOWN
(a) Selects next higher channel.
(s) Selects next lower channel.
See pages 30–32 for Channel
Setting.
• Moves the “ E mark on the MENU
screens.
MUTE
Press Mutes sound.
Press again Restores sound.
When sound is muted, CLOSED
CAPTION appears if available.
9
1 Press
POWER
on the TV set or on the Remote Control to turn on
the TV. The SELECT LANGUAGE mode will be displayed.
2 Press to select “ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH (FRANCAIS)”.
3 Press to SET LANGUAGE and access EZ SETUP
mode.
4 Press
The tuner will automatically search for the broadcast
and cable TV channels. (The CH No. will automatically
increase when it appears.)
If you want to stop the EZ SETUP process once it has
started, press
and it will be canceled.
If you want to SETUP again, please refer to page 29
on CH SETUP.
To cancel EZ SETUP
Press
5 Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
Note:
8 / 9
SE
LLAANG GEUECT
E
NGL SHI
E
SPA OLÑ
F
RAN A SIC
S
ELE T CH:
S
ET VOL+/ :
C
8 / 9
SE
LLAANG GEUECT
E
NGL SHI
E
SPA OLÑ
F
RAN A SIC
S
ELE T CH:
S
ET VOL+/ :
C
CO
NTANNT NA ORENE
CA
BLE
C
S
T
E
ZART
S
ETUP?
S
TOP S ARTT
PL
EWAITASE
A
U
R
OG GTO P
5
21
R
AMM I N
S
TOP S ARTT
2
(EZ SETUP mode)
EZ SETUP during First Use
(On the Set)
(Remote Control)
(SELECT LANGUAGE mode)
CH a/s
VOL k/l
VOL l
VOL k
If EZ SETUP does not memorize all the channels in your region, please refer to page 30 for more
information on manually memorizing the channels using CHANNEL SETTING.
It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is
incorrect or frequency jamming is occuring around the area. Please refer to pages 30 ~ 32 for more
information on manually memorizing the channels using CHANNEL SETTING.
VOL l
9
Dimension: 140mm x 215mm
L When you turn on the TV for the first time, it will automatically
memorize the broadcast channels.
Please perform the following instructions before pressing the
POWER button.
(1) Insert the batteries into the remote control. (See page 5)
(2) Connect the antenna cable to the TV set. (See page 5 ~ 6)
(3) Plug in the AC POWER cord to the wall outlet.
20F540
1
2
POWER
CHANNEL
UP (a)/
DOWN (s)
VOLUME
(
k
)/(
l
)
3
4
5
6
7
8
9
0
100
FLASHBACK
ENTER
PERSONAL PREFERENCE
POWER
TV
DVD
VCR
MENU
MUTE
DISPLAY
INPUT
VOL
CH
CH
VOL
+
ABCD
TV
CH
CH
VOL
VOL
+
VOL
+
(START)
(STOP)
VOL
POWER
10
Demo Mode
To quickly learn more about the TV set, press and hold for
more than three seconds both and or
MENU
on the TV set. The TV set will go into DEMO mode and
briefly explain the various features.
To cancel DEMO mode, again press and hold for more than
three seconds both or
MENU
on the TV set.
Example:
DEMO mode display
Note:
Without signal on COMPONENT IN, video input and antenna in, the DEMO mode cannot be activated.
Accessing the MAIN MENU screen without Remote Control
If you misplaced your Remote Control you can still access most settings via
the MAIN MENU screen when you press
MENU
on the TV set.
Some features of your TV set will not be accessible without the Remote Control.
If you lost your Remote Control, contact a Sharp Service Center for a
replacement.
(On the Set)
(On the Set)
or
CH s CH a
CH a/s
10
Dimension: 140mm x 215mm
20F540
CH a/s
buttons
MENU
button
MENU
button
11
11
Dimension: 140mm x 215mm
L The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.
L Setting the ON SCREEN DISPLAY Language.
1 Press
MENU
to access the MAIN MENU screen.
2 Press to move the a mark to SETUP.
3 Press to access SETUP mode.
4 Press to access LANGUAGE change mode.
5 Press to select ENGLISH, SPANISH
(ESPAÑOL) or FRENCH (FRANCAIS).
6 Press
MENU
to exit.
Language
MENU
SLEEP TIMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
(MAIN MENU screen)
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
SET PU
LANG GUA E
ENERGY SAVE
BLUE SCREEN
L
ENGL HIS
ANG GUA E
ESPAÑOL
FRAN A ICS
(SETUP mode)
(LANGUAGE change mode)
I
ENGL HIS
DIOMA
ESPAÑOL
FRAN A ICS
CH a/s
CH a/s
VOL k/l
VOL k/l
20F540
CH
CH
VOL
VOL
+
VOL
VOL
+
CH
CH
12
12
Dimension: 140mm x 215mm
L You can preset your television to turn off automatically in increments of 30, 60, 90 or 120
minutes.
1 Press
MENU
to access the MAIN MENU screen.
2 Press to access SLEEP TIMER mode.
3 Press to set a sleep time of 30, 60, 90 or 120 minutes.
4 Press
MENU
to exit.
Note:
To turn off the SLEEP TIMER, repeat the above SLEEP TIMER steps and select “– M REMAIN
during step 3.
While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular
intervals or when the remotes DISPLAY key is pressed.
Sleep Timer
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
(MAIN MENU screen)
SLEEP TIMER
12 M0AREM NI
(SLEEP TIMER mode)
VOL k/l
VOL k/l
20F540
VOL
VOL
+
VOL
VOL
+
13
13
Dimension: 140mm x 215mm
Description of Adjustment Items
1 Press
MENU
to access the MAIN MENU screen.
2 Press to move the a mark to VIDEO
ADJUST.
3 Press to access PICTURE adjust mode.
4 Press to select the desired mode.
(Refer to the diagram below.)
5 Press to adjust the setting.
6 Repeat steps 4 to 5 to adjust other settings.
7 Press
MENU
to exit.
Note:
VIDEO ADJUST setting is available for AIR or CABLE/INPUT 1/INPUT 2 and COMPONENT respectively.
Video Adjust
Selected button button
item
PICTURE To increase contrast To decrease contrast
TINT To make skin tones greenish To make skin tones purplish
COLOR To increase color intensity To decrease color intensity
BRIGHT To increase brightness To decrease brightness
SHARP To increase sharpness To decrease sharpness
COLOR To choose a MH, HIGH, LOW or ML COLOR TONE.
TEMP.
RESET To return all adjustments to factory preset levels.
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/()
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
(MAIN MENU screen)
PICTURE
_______
27
VOL UP (+)
increase contrast
PICTURE
TINT
COLOR
SHARP
COLOR TEMP.
RESET
: CH 9
: CH 8
BRIGHT
PICTURE
_______
27
VOL DOWN ()
decrease contrast
(PICTURE adjust mode)
VOL l
CH a/s
VOL k
VOL k/l
VOL k/l
VOL l
CH a/s
VOL k
VOL k/l
VOL k/l
CH a/s
20F540
CH
CH
VOL
VOL
+
1
2
3
4
5
6
7
8
9
0
100
POWER
TV
MENU
MUTE
FLASHBACK
DISPLAY
INPUT
VOL
CH
CH
VOL
+
ENTER
A
B
C
D
PERSONAL PREFERENCE
DVD
VCR
CATV TV
DVD VCR
CH
CH
VOL
VOL
+
20
20
Dimension: 140mm x 215mm
Parental Control (V-CHIP Operation Continued)
L HOW TO SET V-CHIP
[1] MPAA RATING
1 Press
MENU
to access the MAIN MENU screen.
2 Press to move the a mark to
PARENTAL CONTROL.
3 Press to access PARENTAL CONTROL mode.
4 Press to access V-CHIP BLOCK select mode, then
press to select MPAA RATING.
5 Press to move the a mark to PG,
then press to select BLOCK. If you set PG to
BLOCK, PG-13, R, NC-17 and X are automatically blocked.
6 Press to move the a mark to "RETURN",
then press to exit V-CHIP BLOCK select mode.
Note:
Ex.
If you set G to BLOCK , all RATING are automatically blocked.
If you set X to BLOCK, G, PG, PG-13, R and NC-17 are not blocked.
(MAIN MENU screen)
(PARENTAL CONTROL mode)
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/()
REMOTE
KEYPAD
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SE LECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
PARENT CONTOLAL
V CH I P BLOCK
VIEW TIMER
V CH I P OCKLB
MPAA
TV UGI
OP OINT
DEL I NES
SEC ERT ––No .
STA UTSO:FF
: ––
(V-CHIP BLOCK select mode)
MPAA
G
PG
PG 31
R
N
X
B
B
B
B
B
:
:
:
:
:
:
O
O
O
O
O
C
C
C
C
C
K
K
K
K
K
L
L
L
L
L
C 71
RET RNU
MPAA
G
PG
PG 31
R
N
X
B
B
B
B
B
:
:
:
:
:
:
O
O
O
O
O
C
C
C
C
C
K
K
K
K
K
L
L
L
L
L
C 71
RET RNU
VOL k/l
CH a/s
VOL k/l
VOL k/l
CH a/s
VOL k/l
VOL k/l
CH a/s
20F540
CH
CH
VOL
VOL
+
VOL
VOL
+
VOL
VOL
+
CH
CH
CH
CH
VOL
VOL
+
VOL
VOL
+
1
2
3
4
5
6
7
8
9
0
100
MENU
MUTE
FLASHBACK
A
B
C
D
ENTER
PERSONAL PREFERENCE
VOL
VOL
+
CH
CH
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp 20F540 Operation Manual bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp 20F540 Operation Manual in de taal/talen: Engels als bijlage per email.

De handleiding is 2,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info