10
results from improper use, or if these
instructions are not complied with.
Thermal safety cut-out
The preset thermal safety cut-out protects
the heating element from overheating should
the appliance be erroneously switched on
without any water, or if the heating element
is calcifi ed. Once the safety cut-out has
switched off the kettle, it must be allowed to
cool down suffi ciently, or must be descaled
before it is switched on again.
Before using for the fi rst time
To clean the kettle, boil and discard the fi rst
fi lling of water.
Boiling water
∙ Never remove the water container from the
base (or replace it) while the appliance is
switched on.
∙ Remove the water container from its base.
∙ Open the lid and fi ll the container with
water to the desired level, observing the
Min. and Max. markings.
∙ Before closing the lid and placing the
container back on its base, ensure that the
appliance has not yet been switched on.
∙ Insert the plug into a suitable wall socket
and press the On/Off switch; the indicator
light comes on.
∙ The boiling process begins. After
reaching the boiling point, the appliance is
automatically switched off by the integral
steam cut-off device; the indicator light
goes out.
∙ To interrupt the boiling process, set the
On/Off switch to its Off position.
∙ To pour hot water, remove the container
from its base.
∙ To prevent hot steam from being emitted,
ensure that the lid remains closed while
pouring out the water.
∙ Remove the plug from the wall outlet after
use.
∙ Do not leave any residual water in the
container.
Power cord wind-up storage
The wind-up power cord storage under the
base facilitates limiting the length of the
power cord during use and makes it easy to
store the appliance.
Descaling
∙ Depending on the water quality in your
area, lime deposits may build up on the
heating element. It is advisable to remove
any such deposits at regular intervals.
∙ Any warranty claim will be null and
void if the appliance malfunctions
because of insuffi cient descaling.
∙ A mixture of 0.5 litres of water and 40 ml
of vinegar essence is suitable.
∙ Pour the descaler in.
∙ Switch the appliance on and let the
solution reach boiling point.
∙ Leave it to take effect for a short period.
∙ To clean the container after descaling,
rinse thoroughly with clean water
.
∙ During descaling, ensure suffi cient
ventilation and do not inhale any vinegar
vapours.
∙ Do not pour descalers down enamel-
coated sinks.
Cleaning and care
∙ Before cleaning the appliance, ensure it is
disconnected from the power supply and
has cooled down completely.
∙ To avoid the risk of electric shock, do not
clean the kettle and the base with water
