602736
12
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
12
The switch settings (upper heat/lower
heat) may be changed during the cooking
process.
To interrupt the cooking process
temporarily, set the 7-position switch to
the ‘ ’ position.
Always use the door handle to open
the hot door after use. When removing
the baking tray or rack, use the handle
provided. Always place the tray and rack
down on a heat-resistant surface.
After use, set the 7-position switch to the
’ position and remove the plug from
the wall socket.
Using the hot-plates
Always place a pot / saucepan on the
hot-plate rst.
Large hot-plate:
Set the 7-position switch to the required
temperature.
Small hot-plate:
Set the temperature control to the
required temperature.
With one or both hot-plates switched on,
the indicator lamp is lit.
Ensure that the pot is clean and dry on
the outside. Do not use stain covered or
sooty pots / saucepans.
To prevent damage to the hot-plate, only
use pots / saucepans with at bottoms.
Most suitable are pots speci cally
designed for use on electric plates (see
picture I).
Always make sure that the pot / saucepan
used is of at least the same diameter
as the plate; this minimises the loss of
heat and prevents the plate from being
damaged as a result of uneven heat
distribution.
After use, set the 7-position switch to the
’ position (or the temperature control
to ‘0’) and remove the plug from the wall
socket.
Cleaning and care
Before cleaning the appliance, ensure it is
disconnected from the power supply and
has completely cooled down.
To avoid the risk of electric shock, do not
clean the appliance with water and do not
immerse it in water.
Do not use abrasives, harsh cleaning
solutions or spray-type oven cleaners.
The exterior housing and the door may be
cleaned with a damp, lint-free cloth.
The baking tray and rack may be cleaned
using hot water and a mild detergent.
After use, a wet cloth may be used to
remove any spills from the plates.
Following a longer period of use, a special
commercially available cleaning agent
should be used to treat the plates.
Changing the bulb inside the oven
compartment
The bulb is located in the right-hand side
panel behind a glass plate.
Allow the appliance to cool down.
Remove the glass plate by turning it anti-
clockwise.
Remove the defective bulb from its socket
by turning it anti-clockwise.
Fit a new15V bulb (socket-type E14) into
the socket by turning it clockwise.
Replace the glass plate and secure it by
turning clockwise.
Disposal
Devices marked with this symbol must be
disposed of separately from your household
waste, as they contain valuable materials
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Severin TO 2044 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Severin TO 2044 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Deens, Zweeds, Fins als bijlage per email.

De handleiding is 0,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info