on the opposite side.
7. Take out the covering caps and then remove the middle hinge 4.
Caution: Support the door.
8. Take off the freezer door 3.
9. Remove the lower panel to the front 1.
10. Unscrew the hinge bolt 2, together with the washers, from the bracket 7, and fit it on the
corresponding bracket 7 on the opposite side.
11. Take out the sealing plugs 8 from the partition separating the refrigeration and freezer
compartments and replace them in the openings on the opposite side.
12. Take out sealing plug 9 from the freezer door and replace it in the opening on the opposite side.
13. Place the freezer door onto the hinge bolt 2 on holding bracket 7.
Caution: Support the door.
14. Turn the holding bracket 4 with its hinge bolt through 180°, ensuring that the washers remain in
place.
15. Replace the bracket on the opposite side on the freezer door and secure it with the screws.
16. Replace the covering caps over the screw heads.
17. Place the refrigerator door onto the hinge bolt on holding bracket 4.
Caution: Support the door.
18. Re-insert the hinge bolt of the bracket 6 into the refrigerator door.
19. Fit the four covers c over the bracket and the openings.
20. Take out the cover 10 from the lower panel 1 and replace it on the opposite side.
21. Replace the panel 1 on the appliance.
If the unit has been tilted more than 30°, wait for about 4 hours before connecting it to the
mains.
Temperature control
The unit is re-activated by connecting it to the mains. It is only switched off completely when the
plug is removed from the wall socket.
The green mains indicator light shows that the unit is connected to the mains.
The temperature in the refrigerator cabinet can be adjusted by setting the temperature control.
Turning the control clockwise will decrease the temperature, while turning it anti-clockwise will
increase it.
The medium settings are usually most suitable for home use.
We recommend using a thermometer to check the actual temperature inside the cabinet and make
adjustments as necessary.
Following a power interruption, or if the unit has been switched off on purpose, it may take 3 to 5
minutes before it switches on again.
In position ‘0’, the cooling function is switched off, though the appliance is still connected to the
mains.
Interior lighting
Caution: do not remove the cover of the interior LED light. If there should be any malfunction,
please contact the customer service for assistance.
Freezer compartment door
To ensure that frozen food will not de-frost prematurely, the door to the freezer compartment should
be kept closed at all times. This will also prevent an undue build-up of ice and frost. Ensure,
20
