slicing and grating have extremely sharp
blades. To prevent the possibility of severe
injury, use extreme care when handling or
cleaning these attachments.
Caution: always use the appropriate
pestle to feed food into the bowl. Do not
under any circumstances use your hands.
Caution: To avoid damage to the
appliance, do not use the blender in
combination with any of the other
functions.
Caution: Do not let the blender jug run
empty.
Do not touch any moving parts during
operation - this can be extremely
dangerous.
Whenever the blender jug is not being
used, ensure that the safety lid is correctly
tted over the blender mounting.
is appliance should only be used
with the attachments provided by the
manufacturer and in accordance with the
purposes described in this manual.
Always switch the appliance o , remove
the plug from the wall socket and wait
until the motor has come to a complete
standstill
- before assembling or disassembling
the appliance.
- before opening the lid
- when adding or removing any
attachments
- in case of any malfunction,
- a er use,
- during cleaning.
When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
Caution: Any misuse can cause severe
personal injury.
No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
is appliance is intended for domestic or
similar applications, such as
- in shops, o ces and other similar
working environments,
- in agricultural areas,
- by customers in hotels, motels etc. and
similar establishments,
- in bed-and breakfast type environments.
In order to comply with safety regulations
and to avoid hazards, repairs of electrical
appliances must be carried out by quali ed
personnel, including the replacement
of the power cord. If repairs are needed,
please send the appliance to one of our
customer service departments. e
addresses can be found in the appendix to
this manual.
Before rst use
Remove any packing materials completely
and clean all accessories as described in the
section General care and cleaning.
Speed control and Pulse switch
e speed control can be used to vary the
op
erating speed. Alternatively, the pulse
switch may be used - when it is pressed, the
appliance operates at maximum speed. With
the switch in its ‘' position, the motor is
switched o .
Attachment storage
is compartment serves to store the cutting
and grating inserts when they are not in use.
Wind-up power cord storage
e power cord can be wound up for storage
on the underside of the unit. Unwind it
completely before operation.
Operation:
General information
– First, t the required attachment.
– Note: this kitchen appliance is equipped
with three safety switches. e appliance
can only be activated if the selected
attachment has been correctly tted and
safely locked.
– Turn o the appliance a er use (speed
control position ‘') and wait until the
motor has come to a complete standstill
before changing or removing any
11
