712156
14
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
14
142 x 208 mm
Change factory settings
Theunithasvariousfunctionswhichmaybemodiedas
follows:
Turn the unit on and wait until the cup symbols are
permanently lit.
Press the button for 10 seconds to enter the Change
factory settingsmode.Allthreebuttonsashalternately.
Modify the default factory settings as described further
below.
If no input is registered for about 15 seconds, the unit
returns to ‘Ready’ mode.
To return the various functions (water hardness,
automatic switch-off, temperature, amount) back
to their factory settings, press the buttons and
simultaneously, keeping them pressed for three
seconds. The , and buttonsstartashing
and two beep signals are heard. The appliance switches
off.
Adjusting the level of water hardness
Theunitgivesyouadescalingnotication.Depending
on the water quality (lime content), the button will
ashafter600,500(factorysetting)or400cupcycles.
To ensure proper functioning of the descaling
notication,thelevelofwaterhardnessinyourarea
must be set.
The level of water hardness can be set for soft, normal
or hard water.
Enter the Change factory settings mode (see Change
factory settings).
Press brieytoenterthe‘waterhardness’mode.
Press one of the following buttons for 3 seconds to set
the required water hardness:
: soft water (< 8.4 °dH)
: medium hard water (8.4 – 14 °dH)
: hard water (> 14 °dH / 2.5 mmol/l)
After 3 seconds, the buttonashes3timesto
conrmthenewsetting.Theunitreturnsto‘Ready’
mode.
Automatic switch-off
This appliance comes with an automatic switch-off
feature.
The unit automatically switches off after 25 minutes of
non-use.
The duration until automatic switch-off can set at 9
minutes, 25 minutes (factory setting) or 3 hours:
Enter the Change factory settings mode (see Change
factory settings).
Press brieytoentertheAutomatic switch-off
mode.
Press one of the following buttons for 3 seconds to set
the desired auto switch-off time:
: 9 minutes
: 25 minutes
: 3 hours
After 3 seconds, the
buttonashes3timesto
conrmthenewsetting.Theunitreturnsto‘Ready’
mode.
Changing the espresso temperature
The temperature of the espresso can be adjusted to low,
medium (factory setting) and high.
Adjust the temperature as follows:
Enter the Change factory settings mode (see Change
factory settings).
Press brieytoentertheChanging the espresso
temperature mode.
Press one of the following buttons for 3 seconds to set
the desired temperature:
: low
: medium
: high
After 3 seconds, the
buttonashes3timesto
conrmthenewsetting.Theunitreturnsto‘Ready’
mode.
Changing the espresso amount
The amount of espresso per cup can be adjusted
individually.
Proceed as described in Making espresso, but keep the
or pressed, until the desired espresso amount
has been drawn.
This amount setting is now saved for future cups. The
amount of espresso must be between 15 and 220 ml.
Any other quantities cannot be saved.
The default factory setting is 20 ml/cup.
Cleaning and care
Remove the plug from the wall socket and wait until the
appliance has cooled down.
To avoid the risk of electric shock, do not clean the
appliance with liquids or immerse it.
Do not use abrasives or harsh cleaning solutions.
Allow the panarello to cool down after each use,
then remove and clean it with hot soapy water. The
small aperture on the centre of the panarello must be
unobstructed at all times. If necessary, remove any
blockageusinganeneedle.
Wipe the outside of the steam tube with a damp cloth.
Allowthesieveholdertocooldownsufcientlybefore
tapping its side against a vertical surface to loosen the
grounds before emptying it.
Theindentationsonthelterholderfacilitateremoving
theltersieve;usethengerstopullthesieveoutfrom
above.
Thelterholder,lterinsertsanddriptraymaybe
cleaned in warm water using a mild detergent; do not
clean these parts in a dish-washer.
Remove the water container and pour out any remaining
water. Clean the container with soapy water and dry
thoroughly.
The exterior housing may be wiped with a damp, lint-
free cloth.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Severin-KA-5994

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Severin KA 5994 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Severin KA 5994 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info