712376
14
Verklein
Vergroot
Pagina terug
1/82
Pagina verder
must be used.
The espresso must be prepared before
the steam function is used for frothing
the milk.
-
Frothing the milk
- Fill a suitable jug with around 100 ml
of cold milk (do not preheat the jug).
- Place another (different) container
under the steam tube to begin with.
- Turn the valve selector control to the
position. After a few seconds,
steam and water will be emitted from
the nozzle.
- As soon as steam only (no water) is
emitted, position the jug containing
the milk under the steam tube.
- Move the jug round with a circular
motion for around 40-45 seconds,
making sure that the nozzle remains
submerged while frothing is in
progress.
- As soon as the milk appears to be
sufficiently frothy, turn the valve
selector control to its neutral position
to switch the pump off. During
frothing, the milk will heat up, but
must not be allowed to reach boiling
point.
- Once the valve selector is in the
neutral position, a slight noise will be
heard. This is due to technical
processes and perfectly normal.
- Pour the hot milk into the cup
containing the espresso coffee and,
using a spoon, spread the milk froth
over it.
-
Reheating beverages
- Insert the steam nozzle into the liquid
to be reheated and turn the valve
selector control to the position.
- Once the liquid has reached the
desired temperature turn the valve
selector control to its neutral position.
General Care and Cleaning
Before cleaning the espresso maker,
ensure it is disconnected from the power
supply and has cooled down completely.
To avoid the risk of electric shock, do
not clean the appliance with water and
do not immerse it in water.
Do not use abrasives or harsh cleaning
solutions.
Before cleaning the appliance, and also
in the case of the appliance remaining
unused for an extended period of time,
the remaining water in the container
should be drained completely. The
water container should be thoroughly
rinsed at regular intervals.
The steam nozzle must be cleaned
immediately after the frothing process.
Wiping the nozzle with a wet cloth
should suffice.
-
If the steam nozzle becomes blocked,
proceed as follows:
- Pull the milk frother off the steam
nozzle.
- Unscrew the nozzle from the steam
tube, using the measuring scoop as a
tool.
- Insert a fine pin or needle into the
opening of the steam nozzle to
remove the blockage.
- Screw the steam nozzle back onto the
tube.
- Push the milk frother back onto the
nozzle.
-
All removable parts may be cleaned
with warm, soapy water.
-
Always empty the drip tray in good
time. Drip tray and drainer may be
cleaned with warm, soapy water.
-
The exterior housing may be wiped with
a dry or slightly damp, lint-free cloth.
-
The boiler outlet may be wiped with a
moist cloth.
-
The gasket area around the boiler outlet
(at the bayonet locking socket) should
be cleaned using a brush. A hard brush
is recommended.
Descaling
Depending on the water quality (lime
content) in your area as well as the
frequency of use, all thermal household
14
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Severin KA-5986 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Severin KA-5986 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans, Pools, Deens, Zweeds, Fins als bijlage per email.

De handleiding is 0,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info