794445
17
Verklein
Vergroot
Pagina terug
1/104
Pagina verder
17
142 x 208 mm
For appliances with dust bags
Changing the dust bag
The dust bag can only hold a limited amount of dirt.
Therefore, make sure you change the dust bag if the suction power drops noticeably or the dust level indicator lights up
red:
1. Make sure that the appliance is switched off.
2. Remove the tool and the suction tube.
3. Press the button on the top of the appliance and remove the dust container by pulling it downwards.
4. Remove the cover from the dust container (see Fig. IV).
5. Remove the lled dust bag by pulling it upwards and dispose of it properly.
6. Insert a new dust bag following the direction of the arrow.
7. Replace the cover on the dust container and push it until you hear it click into place.
Attention! The dust container has a safety function that prevents incorrect insertion of the dust bag. If you cannot
mount the dust container back on the appliance, check that the dust bag has been inserted correctly.
8. Push the dust container back into the appliance until you hear it click into place.
Cleaning the HEPA lter
The HEPA lter can get clogged due to soiling, causing the suction power to drop. Make sure you clean the lter on a
regular basis.
At the latest
if the suction power seems to be reduced
before storing the appliance for an extended period
before sending the appliance to the service centre.
Cleaning the lter:
1. Make sure that the appliance is switched off and is not charging.
2. Remove the tool and the suction tube.
3. Remove the HEPA lter cover underneath the handle by turning it counter-clockwise.
4. Pull out the lter.
5. Tap the lter out. If necessary, brush off with a small brush and tap out any loose dust.
6. Slide the lter back in.
7. Replace the cover and lock in place by turning clockwise.
Changing the HEPA lter
When normally used for household purposes, the lter should be replaced every 6 months.
Cleaning the brush roller in the oor tool and the upholstery tool
Soiling may prevent the brush roller from rotating freely. Clean the brush roller regularly.
1. Make sure that the appliance is switched off and is not on charge.
2. Remove the tool from the suction tube.
Floor tool:
3. Press the button on the side of the tool ( ). You can pull the brush roller out of the housing from the side.
4. Remove any hair and dirt from the brush, using a pair of tweezers or scissors carefully, if necessary.
Attention! Carefully use scissors within the brush roller groove to cut away any hair or debris wrapped around the
brush roller.
5. Slide the brush roller back into the tool. To do this, press the red button and slide the brush roller back in from the side
until you hear it click into place.
Upholstery tool:
3. Loosen the locking latch on the side of the tool by turning it counter-clockwise.
4. Remove the brush roller.
5. Remove any hair and dirt from the brush, using a pair of tweezers or scissors carefully, if necessary.
6. Slide the brush roller back into the tool, push it down and lock in place by turning clockwise until the lock engages
above the elevation.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Severin HV 7186 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Severin HV 7186 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 1.06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info