Dear Customer,
Before using the appliance, the user should
read the following instructions carefully.
Connection to the mains supply
The appliance should only be connected to
an earthed socket installed in accordance
with the regulations. Make sure that the
supply voltage corresponds with the voltage
marked on the rating label. This product
complies with all binding CE labelling
directives.
Familiarisation
1. Handle
2. Temperature indicator light – iron
3. Iron rest (on steam generator)
4. Water filler hole
5. Water reservoir
6. Steam generator
7. Rating label (on steam generator)
8. Flexible connecting hose
9. Swivel-type anti-kink covering
10. Temperature control knob (infinitely
adjustable)
11. Steam jet button
12. Iron
13. Sole plate
14. Main indicator light - pump
15. Steam output control
16. Power cord with plug
Important safety instructions
● Before the appliance is used, the main
body including the power cord as well as
any attachment fitted should be checked
thoroughly for any defects or leakage.
Should the appliance, for instance, have
been dropped onto a hard surface, it
must no longer be used: even invisible
damage may have adverse effects on the
operational safety of the appliance.
● The power cord should be regularly
examined for any signs of damage. In the
event of such damage being found, the
appliance must no longer be used.
● Do not operate the appliance if excessive
strain has been put on the connecting
hose. Damage cannot always be detected
from the outside; the entire unit should
therefore be checked by a qualified
technician before it is used again.
● Always place the appliance on a flat,
level and heat-resistant surface during
operation. Do not position the appliance
on or near hot surfaces or open flames
such as hot-plates or gas flames.
● Great care is necessary in using any
electrical appliance, especially near
children. Do not leave the appliance
unattended while connected. Always
remove the plug from the wall socket and
place the iron back on its rest on the
steam generator.
● When ironing is interrupted, the
appliance must be replaced on its rest on
the steam generator.
● The iron must be used and stored on a
stable and durable surface only.
● With the iron placed on its rest on the
steam generator, ensure that this too is
on a stable and durable surface.
● The appliance operates at very high
temperatures. Do not touch any part of
the appliance except the handle. Burns
can occur from touching the hot parts of
the housing or the sole plate and from
hot water or steam. Do not allow steam
to escape in the direction of anyone
nearby.
● When operating the appliance, hold only
by the handle.
● Do not attempt to iron or to smooth out
wrinkles or creases from clothes by using
the steam jet function while wearing
them.
● Do not allow the power cord to touch
hot surfaces. Do not coil the power cord
round the appliance.
● Always remove the plug from the wall
socket
- after use,
8
Steam Generator
