8
Multi-use slicer
Dear Customer,
Before using the appliance, please read the
following instructions carefully and keep this
manual for future reference. The appliance
must only be used by persons familiar with
these instructions.
Connection to the mains supply
The appliance should only be connected to
an earthed socket installed in accordance
with the regulations.
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label of the appliance. This product
complies with all binding CE labelling
directives.
Familiarisation
1. On/Off switch
2. Thickness selection knob
3. Ham-cutting blade
4. Serrated blade
5. Central locking screw
6. Sliding tray
7. Power cord with plug
8. End-piece holder with fi nger guard
9. Stop plate
10. Rating label (on underside of the unit)
Important safety instructions
∙ In order to avoid hazards, repairs
to this electrical appliance or its
power cord must be carried out by
our customer service. If repairs are
needed, please send the appliance
to our customer service department
(see appendix).
∙ Before cleaning the appliance,
ensure it is disconnected from the
power supply and has cooled down
completely.
∙ To avoid the risk of electric shock, do
not clean the appliance with water
and do not immerse it in water.
∙ The appliance must be cleaned
regularly. For more detailed
information, please refer to the
section Cleaning and care.
∙ We strongly recommend that the
appliance is only used with the
sliding tray and end-piece holder
properly installed and in position.
Exceptions may be made only if
required by the size or shape of the
food to be sliced.
∙ Caution: Any misuse can cause
severe personal injury.
∙ Caution: The blade is very sharp;
extreme care should be taken when
handling it.
∙ Always remove the plug from the wall
socket
- when there is no supervision,
GB
