Seite 26
EPG
Manual Add Service: According to the satellite,
TP and PID of the channel which is known, you
can add this channel manually under this menu.
1. Select a channel with EPG, press EPG of
remote control and choose the programmer
you love, and then press the blue button of
RCU to set the timer, and then save it. You
can set 8 timer at the most.
2. And then you can turn to other channels or
leave for something. If you go out, you only
have to open the STB (or set as standby
mode) and close the TV set. When you come
back, power on the STB and open the TV set,
press the MEDIA key of remote control, then
choose the channel you have recorded, then
press OK to play.
Time-Shift
You will not lose any wonderful program with
the powerful function of Time-shift. It switches
to other time periods, and showing the program
you wish to access. When showing program
time, you're Unable to watch, connected as long
as the VCR or USB devices to STB, then use
the function of Time-shift, the channel which
you want to see will be record down, don't miss
the wonderful. Even when you go out, and do
not want to miss the good program, and then
use Time-shift function will be to achieve your
dreams.
Operation Tips:
1. Power on the STB. During watching, press
Time-shift rst and then Play to start time-
shift function, press INFO to show the
information about Time-shift and save the
le on USB device.
2. According to your connected devices
size, it calculates the mainly record time,
current record time and total record time.
If you leave, you have a better come back
to watch the program within the mainly
record time.
3. Press the "VOL-/+" to increase or reduce
the volume.
4. When watch program by time-shift, press
◄◄ or ►► of remote control as backward
(FR) or forward (FF). And there are FR*2,
FR*4, FR*8, FR*16, FR*32 as the fall
back speeds item, and FF*2, FF*4, FF*8,
FF*16 as the go forward speeds. So, you
can replay the program several minutes
or hours ago; also, you can forward to
advance until the current stream.
