Seite 20
8.3 Private Setting
This feature allows control of various items such
as STANDBY MODE AUTO PMT OPEN, AUTO
STANDBY and STANDBY DISPLAY.
• Standby Mode: Two Standby modes are
available NORMAL and LOW CONSUME.
The LOW CONSUME option offers a Standby
Power consumption of less than 1W but takes
longer to power up out of Standby than the
NORMAL setting. Using the VOL+- buttons to
select your preference. You will be prompted
to save your new settings on exiting.
• Auto PMT Open: This feature automatically
corrects changes to Audio PID information for
programmes. Default is YES (RECOMMEN-
DED SETTING).
• Auto Standby: Switches the receiver into
STANDBY after 3 hours of inactivity. Using
the VOL+- buttons select1Min, 5Min, 10Min,
30Min, 60Min, 20Min, 180Min, 240Min, your
preference. You will be prompted to save your
new, Default is 180Min settings on exiting.
NEEDS CONFIRMATION.
• Standby Display: Turns the CLOCK DIS-
PLAY on or OFF when in LOW CONSUME
setting (See STANDBY MODE).
8.4 Factory Default
This enables the User to return the receiver to
the settings that were made in the Factory. It is
useful if some changes that you have made have
stopped your Receiver from working properly.
There are two options in this menu - DEFAULT
ALL and DELETE ALL CHANNELS. Press OK to
access these two choices.
• Default All: This provides the full FACTORY
DEFAULT reset. Press OK, you will then be
prompted to enter the PASSWORD (this is
the same as the Parental Control password)
and then nally prompted to conrm that you
wish to carry out the reset operation. Press
CANCEL if you have changed your mind or
OK to conrm.
• Delete All Channels: Press the CH- button
to select DELETE ALL CHANNELS, Press
OK, you will then be prompted to enter the
PASSWORD (this is the same as the Parental
Control password) and then nally promp-
ted to conrm that you wish to carry out the
deletion operation. Press CANCEL if you have
changed your mind or OK to conrm.
NOTE: If you carry out a DELETE ALL CHAN-
NELS you will need to perform a DEFAULT
ALL afterwards in order to restore your pre-
loaded programmes.
