753050
36
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
36
Installation instructions for trained electricians only
5 Variant 2
Installing humidity/temperature
sensorFTS II Fig. 6 7
Install the humidity/temperature sensor FTS II in the
sauna cabin about 15 cm below the ceiling and oppo-
site of the heating system.
Connect the humidity/temperature sensor FTS II only
with the supplied 150° C temperature-resistant con-
necting line or an equivalent temperature-resistant line.
On the outside of the sauna cabin, the temperature-
resistant connecting line can be extended with custo-
mary lines.
WARNING - Electric shock:
Run the power cables separate to other sen-
sor and control lines.
Protect single insulated lines with a pipe
(double insulation).
1. Run the line to the mounting location of the humi-
dity/temperature sensor FTS II 2 in the cabin wall
and fix in position with wiring clips.
2. Connect terminals of up to 150° C temperature-
resistant line to sensor terminals 3 according to
circuit diagram 7.
3. Conduct tests according to the chapter “Tests”.
4. Fix humidity/temperature sensor FTS II 2 to the
cabin wall opposite of the heating system with two
wood screws 1 keeping a distance of 15 cm to
the ceiling.
6 Tests
An authorized electrician must carry out the tests.
WARNING - Electric shock:
The following tests are carried out with the
supply voltage switched on.
1. Check the contacts of the ground terminals.
2. Test the safety shutdown with the line to the tem-
perature sensor F I interrupted.
- The lines have to be disconnected at the sensors
to include the stove sensor lines in the test.
- The heating system has to shut down on its own
when the white or red stove sensor lines are dis-
connected and in case of a short circuit in the white
line.
3. Test the phase interconnection for sauna opera-
tion L1, L2, L3 to U, V, W.
4. Test the phase interconnection for climate opera-
tion L1, L2, L3 to U, V1, W.
5. Test for maximum permissible heat output of CK
3 sauna control of 3.5 kW per phase.
6. With connected, optional additional power unit:
- Check control lines St1, St2 and St3,
- Test for maximum permissible heat output of op-
tional power unit S2-18 of 3 kW per phase.
- Test for maximum permissible heat output of op-
tional power unit S2-30 of 7 kW per phase.
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sentiotec CK 3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sentiotec CK 3 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info