704655
24
Verklein
Vergroot
Pagina terug
1/30
Pagina verder
HD 350BT | 1
HD 350BT
Around-ear headphones
Model: SEBT3
Instruction manual
Use the search function, the navigation (left) or the following links:
Start
“Product overview”
“Getting started”
“Using the headphones”
“FAQ/If a problem occurs ...
“Specifications”
Sennheiser electronic GmbH & Co. KG
Am Labor 1
30900 Wedemark
Germany
www.sennheiser.com
Version: 10/20 A03
Important safety instructions
2 | HD 350BT
Important safety instructions
Read this instruction manual carefully and completely before
using the product.
Always include this instruction manual when passing the product
on to third parties.
Do not use the product if it is obviously defective or makes loud,
unusual (whistling or beeping) noise.
Only use the product in environments where Bluetooth® wireless
transmission is permitted.
Preventing damage to health and accidents
Protect your hearing from high volume levels. Permanent
hearing damage may occur when headphones are used
at high volume levels for long periods of time. Sennheiser
headphones sound exceptionally good at low and medium volume
levels.
The product generates stronger permanent magnetic
fields that could cause interference with cardiac pace-
makers, implanted defibrillators (ICDs) and other
implants. Always maintain a distance of at least 3.94"/10 cm
between the product component containing the magnet and the
cardiac pacemaker, implanted defibrillator, or other implant.
Keep the product, accessories and packaging parts out of reach
of children and pets to prevent accidents. Swallowing and chok-
ing hazard.
Do not use the product in an environment that requires your spe-
cial attention (e.g. in traffic or when performing skilled jobs).
Preventing damage to the product and malfunctions
Always keep the product dry and do not expose it to extreme tem-
peratures (hairdryer, heater, extended exposure to sunlight, etc.)
to avoid corrosion or deformation. The normal operating tempera-
ture is from 0 to 40 °C/32 to 104 °F.
Use only attachments/accessories/spare parts supplied or rec-
ommended by Sennheiser.
Clean the product only with a soft, dry cloth.
Use the product with care and store it in a clean, dust-free envi-
ronment.
Safety instructions for the lithium polymer rechargeable battery
WARNING
If abused or misused, the rechargeable batteries may leak.
In extreme cases, they may even present a risk of:
heat generation,
fire development,
•explosion,
•smoke or gas development.
Important safety instructions
HD 350BT | 3
Notes on data collection and processing and on firmware updates
This product stores individual settings such as the volume and the
Bluetooth addresses of paired devices. This data is required for the
operation of the product and is not transferred to Sennheiser or com-
panies commissioned by Sennheiser and is not processed.
Using the “Sennheiser Smart Control” app, you can update the firm-
ware of the product for free via an Internet connection. If the device
on which the app is installed is connected to the Internet, the follow-
ing data is automatically transferred to and processed by Sennheiser
servers in order to provide and transfer suitable firmware updates:
MAC address, Bluetooth Low Energy UUID, Bluetooth name of the
product, firmware version of the product and version of the app. The
data will only be used as specified and will not be stored perma-
nently.
If you do not want this data to be transferred and processed, do not
connect to the Internet.
Only use rechargeable batteries and chargers
recommended by Sennheiser.
Only charge the product / rechargeable batteries at
ambient temperatures between +10 °C to +40 °C/50 °F
to 104 °F.
Do not heat the product / rechargeable batteries above
+70 °C/140 °F. Avoid exposure to sunlight and do not
throw the product / rechargeable batteries into fire.
When not using the product / rechargeable batteries for
extended periods of time, charge them regularly (about
every three months).
Switch rechargeable battery-powered products off after
use.
Dispose of defective products with built-in rechargeable
batteries at special collection points or return them to
your specialist dealer.
Important safety instructions
4 | HD 350BT
Intended use/Liability
These headphones have been designed as an accessory for Blue-
tooth compliant devices. They are intended for wireless audio com-
munication such as music playback and phone calls via Bluetooth
wireless technology.
It is considered improper use when the product is used for any appli-
cation not named in the corresponding product documentation.
Sennheiser does not accept liability for damage arising from misuse
or improper use of this product and its attachments/accessories.
Sennheiser is not liable for damages to USB devices that are not con-
sistent with the USB specifications.
Sennheiser is not liable for damages resulting from the loss of con-
nection due to flat or overaged rechargeable batteries or exceeding
the Bluetooth transmission range.
Before putting into operation, please observe the respective coun-
try-specific regulations.
Package contents
HD 350BT | 5
Package contents
Online you can find:
this detailed instruction manual and additional information
www.sennheiser.com/download
the Sennheiser Smart Control app for configuring the head-
phones and for additional functions
www.sennheiser.com/smartcontrol
HD 350BT around-ear headphones
Model: SEBT3
USB cable with USB-C connector
Quick guide
Safety guide
A list of accessories can be found on the HD 350BT product
page at www.sennheiser.com. Contact your local Sennheiser
partner: www.sennheiser.com > “Service & Support”.
Product overview
6 | HD 350BT
Product overview
Model: SEBT3
Headband
Ear cup joints
Ear cups, steplessly adjustable
On/off button
pressing for 4 seconds activates the Bluetooth pairing
mode
LED
USB-C socket for charging
Volume – button (volume down)
Volume + button (volume up)
Right R
Left L
4
5
6
2
2
3
7
8
0
B
A
9
1
Product overview
HD 350BT | 7
Overview of the LED display
During operation
During phone calls
3-way multi-function button for music and call functions
Voice assistant button
Ear pads
Speech microphones (2 pcs.) for phone calls
LED Meaning; the headphones
flashes blue 3x switch on
flashes blue are switched on
flashes blue 3x are connected to a device via Blue-
tooth
flashes red/
blue are in Bluetooth pairing mode
flashes red 3x
are not connected to a device via
Bluetooth or the connection has been
lost
LED Meaning
flashes blue Incoming call
flashes red
Incoming call and the rechargeable
battery of the headphones is almost
empty
If the LED does not light up immediately during charging, clean
the charging contacts and charge the headphones until the
LED lights up again (> 11).
3x
3x
3x
Product overview
8 | HD 350BT
Notes on voice prompts
The headphones output voice prompts for various functions (see
examples below).
Notes on beeps/acoustic signals
The headphones output beeps/acoustic signals for the following
functions.
Voice prompt Meaning/headphones
“Power on” are switched on
“Power off” are switched off
“Device (1) (2) connected” are connected to device 1 or 2
“Lost connection” are not connected via Bluetooth
“Pairing” are in Bluetooth pairing mode
“Call rejected” incoming call rejected
“Call ended” call ended
“More than xx hours
playtime”
Rechargeable battery has the
stated charge level
“Recharge headset” Rechargeable battery is empty.
Recharge the headphones.
Acoustic signal Meaning/headphones...
2x low-pitched beep minimum volume is reached
2x low-pitched beep maximum volume is reached
Getting started
HD 350BT | 9
Getting started
1. Charging the rechargeable battery
The headphones' rechargeable battery is not fully charged upon
delivery. Before using the headphones for the first time, charge the
rechargeable battery for a complete charging cycle without interrup-
tion (> 11).
2. Installing the Smart Control app on your
smartphone
The Sennheiser Smart Control app allows you to use all functions
and settings of the headphones and to e.g. adjust the sound to your
liking using the equalizer (> 15).
3. Connecting the headphones to a Bluetooth
device
Connect the headphones to your smartphone via Bluetooth (> 12).
USB-AUSB-C
“Sennheiser Smart Control”
4s
Hold
Getting started
10 | HD 350BT
4. Putting the headphones on and adjusting the
headband
For good sound quality and best possible wearing comfort, the head-
band can be adjusted to properly fit your head (> 17).
Using the headphones
HD 350BT | 11
Using the headphones
Information on the rechargeable battery
and the charging process
The headphones have a built-in rechargeable battery. A complete
charging cycle takes up to 2 hours. Before using the headphones for
the first time, charge the rechargeable battery for a complete
charging cycle without interruption.
When the headphones are being charged, the LED lights up (> 7).
Once the headphones are fully charged, the LED flashes blue 5x and
then goes off. When the battery charge drops to a critical level, a
voice prompt asks you to recharge the headphones (“Recharge
headset”).
Sennheiser recommends using the supplied USB cable and a com-
patible standard USB power supply for charging the headphones.
While the headphones are being charged, you can still listen to
music or make phone calls. In this case, however, the charging time
may be longer.
Charging the headphones' rechargeable
battery
1. Connect the USB-C connector of the charging cable to the USB
socket of the headphones.
2. Connect the USB-A connector to a corresponding socket of a USB
power source (to be ordered separately). Make sure that the USB
power source is connected to the power supply system.
The charging process of the headphones begins. The LED dis-
plays the charge status:
Right R
2 HRS
USB-A
USB-C
LED Off
Using the headphones
12 | HD 350BT
Connecting the headphones to a
Bluetooth device
To be able to use the Bluetooth connection, you must register both
devices (headphones and e.g. smartphone) once. This process is
called pairing.
If operation differs from the steps mentioned, also refer to the
instruction manual of the Bluetooth device you are using.
Information on the Bluetooth wireless
connection
The headphones are compatible with Bluetooth 5.0.
If your audio source supports one of the following high-resolution
audio encoding methods, music is automatically played in high audio
quality: aptX, aptX LL or AAC. Otherwise the headphones will play
your music in normal audio quality (SBC).
Paired devices establish the Bluetooth wireless connection immedi-
ately after switch-on and are ready for use.
On switch-on, the headphones automatically try to connect to the
last connected Bluetooth device. The headphones can save the con-
nection profiles of up to eight Bluetooth devices with which they
have been paired.
If you pair the headphones with the ninth Bluetooth device, the saved
connection profile of the least used Bluetooth device will be over-
written. If you want to re-establish a connection with the overwritten
Bluetooth device, you have to pair the headphones again.
LED Meaning
lights up red Rechargeable battery is being charged
flashes blue
5x, then goes
off
Rechargeable battery is fully charged
If the LED does not light up immediately during charging, clean
the charging contacts and charge the headphones until the
LED lights up again (> 11).
You can speed up the charging process by charging the head-
phones when they are switched off.
5x
When you switch on the headphones for the first time, they
automatically switch to pairing mode.
Using the headphones
HD 350BT | 13
Paired and connected Bluetooth device
Paired Bluetooth device (currently not connected)
Using the headphones
14 | HD 350BT
Pairing the headphones with a Bluetooth
device
1. Switch the headphones on (> 16) and place them close to the
Bluetooth device (max. 20 cm).
2. Press and hold the on/off button for 4 seconds.
The LED flashes red and blue. The headphones are in pairing
mode.
3. Activate Bluetooth on your Bluetooth device.
4. Via the menu of your Bluetooth device, start the search for new
Bluetooth devices.
All active Bluetooth devices in the proximity of your Bluetooth
device are displayed.
5. From the list of found Bluetooth devices, select “HD 350BT”. If
necessary, enter the default pin code “0000”.
6. If pairing was successful, you hear the voice prompt “Device (1)
connected”. The LED flashes blue 3x.
If no connection is established within 5 minutes, pairing mode
is terminated and the headphones switch to standby mode. If
necessary, repeat the steps described above.
If you switch on the headphones for the first time (the pairing
list is empty), they automatically switch to pairing mode.
1
3
5
4
2
4s
Hold
HD 350BT
Keyword: 0000
“Device (1)
connected“
Menu
Add Device
20 cm
Right R
Menu
Bluetooth on
Bluetooth off
ON
OFF OFF
Using the headphones
HD 350BT | 15
Disconnecting the headphones from a
Bluetooth device
Via the menu of your Bluetooth device, disconnect the connection
to the headphones.
The headphones are disconnected from the Bluetooth device.
You hear the voice prompt “Lost connection”. The headphones
switch to standby mode.
Installing the Smart Control app
To make full use of all the settings and functions of the headphones,
you need to have the free Sennheiser Smart Control app installed on
your smartphone.
Download the app from the App Store or Google Play and install it on
your smartphone. Alternatively, you can use your smartphone to
scan the following QR code or to call up the following Internet site:
www.sennheiser.com/smartcontrol
Connect your smartphone to the headphones via Bluetooth (> 12).
Start the Smart Control app.
Follow the instructions in the app.
The Smart Control app recognizes the headphones and activates
all available settings and functions.
To delete the Bluetooth pairing list of the headphones, > 26.
“Sennheiser Smart Control”
Using the headphones
16 | HD 350BT
Switching the headphones on
1. Unfold both ear cups.
The joints click into place.
2. Press and hold the on/off button for 4 seconds.
The LED flashes red/blue. If Bluetooth is activated on the head-
phones, you hear the voice prompts “Power on” and “Device (1)
connected”.
If Bluetooth is deactivated on the headphones, you hear the voice
prompt “Power on“.
WARNING
Danger of hearing damage due to high volume levels!
Listening at high volume levels can lead to permanent
hearing defects.
Before putting the headphones on, adjust the volume
to a low level (> 19).
Do not continuously expose yourself to high volume
levels.
Make sure that Bluetooth is already activated on your Blue-
tooth device when switching on the headphones.
If Bluetooth is activated and the headphones cannot find a
paired Bluetooth device within a few minutes, you hear the
voice prompt “Lost connection”. The LED flashes red 3x. The
headphones switch to standby mode.
1 2
4s
Hold
“Device (1)
connected“
“Power on“
ON
Using the headphones
HD 350BT | 17
Switching the headphones off
1. Press and hold the on/off button for 2 seconds.
2. You hear the voice prompt “Power off” and the LED flashes red 3x.
The headphones switch off.
Putting the headphones on and adjusting
the headband
For good sound quality and best possible wearing comfort, the head-
band can be adjusted to properly fit your head.
Wear the headphones so that the headband runs over the top of
your head. The markings R for the right side and L for the left side
can be found on the inside of the headband.
Move the ear cups up or down the headband slider until:
your ears are comfortably covered by the ear pads,
you feel even, gentle pressure around your ears,
a snug fit of the headband on the head is ensured.
For optimal sound quality, the ear pads must completely surround
your ears.
12
2s
Hold
“Power off“
Right RLeft L
Using the headphones
18 | HD 350BT
Retrieving information on the battery
charge status
When the headphones are connected to your Bluetooth device, the
battery charge status can be displayed on the screen of your smart-
phone (depending on the device and operating system used).
The Smart Control app also displays the battery charge status.
You can retrieve information on the battery charge status on the
headphones by pressing the center of the volume button 1x.
Voice prompt Meaning
“Recharge headset” The rechargeable battery is empty.
Recharge the rechargeable battery (>
11).
“More than xx hours
playtime”
The remaining battery charge is
displayed in hours.
“Recharge
headset“
“More than xx
hours playtime
ON
1x
Using the headphones
HD 350BT | 19
Adjusting the volume
You can adjust the volume for music, voice prompts, beep sounds,
and phone calls.
If you are playing music or are on a call: Press the rear part or the
front part of the volume button to increase or reduce the volume
for music and phone calls.
When the maximum or minimum volume is reached, you hear a beep.
Controlling music playback
The following music playback functions are only available when the
headphones and the device are connected via Bluetooth. Some
smartphones or music players may not support all functions.
Playing/pausing music
Press the center of the 3-way multi-function button 1x.
WARNING
Danger of hearing damage due to high volume levels!
Listening at high volume levels can lead to permanent
hearing defects. Toggling between the audio sources
may cause enormous volume jumps that can perma-
nently damage your hearing.
Before putting the headphones on and before tog-
gling between audio sources, adjust the volume to a
low level.
Do not continuously expose yourself to high volume
levels.
You can also adjust the volume using the connected Bluetooth
device.
Right R
Using the headphones
20 | HD 350BT
Playing the next track
Slide the 3-way multi-function button backwards.
Playing the previous track
Slide the 3-way multi-function button forwards.
Making phone calls using the headphones
The following call functions are only available when the headphones
and smartphone are connected via Bluetooth. Some smartphones or
communication apps may not support all functions.
Making a call
Dial the desired number on your smartphone.
If your smartphone does not automatically transfer the call to the
headphones, select “HD 350BT” as the output device on your
smartphone (see the instruction manual of your smartphone if
necessary).
3-way multi-function
button Function
Press 1x Plays or pauses music
3-way multi-function
button Function
Slide
backwards
Plays the next track in the playlist
3-way multi-function
button Function
Slide
forwards
Plays the previous track in the playlist
Using the headphones
HD 350BT | 21
Accepting/rejecting/ending a call
If your headphones are connected to a smartphone and you receive
a call, you hear a ring tone in the headphones.
If you are playing music when you receive a call, the music pauses
until you end the call.
3-way multi-function button Function
Press 1x Accepts a call
Press 1x Ends a call
Voice prompt “Call ended”
Hold for 2
sec Rejects a call
Voice prompt “Call rejected”
Hold for 2
sec Continues the active call and rejects
an incoming call
Press 1x Puts the active call on hold and
accepts an incoming call
Press 2x Ends the active call and accepts an
incoming call
Press 2x Toggles between active call and call
on hold
Right R
Using the headphones
22 | HD 350BT
Using the voice assistant/voice dialing
Press the voice assistant button once.
The available voice assistant of your smartphone is activated (*
depending on the system or app on your smartphone: Siri, Google
Assistant, or others. If no voice assistant is available, voice dialing
may be activated).
Ask the voice assistant your question or make a request.
To cancel the voice assistant/voice dialing:
Press the voice assistant button 1x.
Adjusting sound effects/the equalizer
To be able to use the sound effects/equalizer, you require the Smart
Control app (> 15).
In the Smart Control app, select the desired sound effects.
The sound effects are stored in the headphones. These sound
settings are active even without using the Smart Control app, i.e.
when you are using another Bluetooth device.
Using the headphones
HD 350BT | 23
Storing and transporting the headphones
Fold up the headphones.
1 2 3
Care and maintenance
24 | HD 350BT
Care and maintenance
Clean the parts of the product only with a soft, dry cloth.
Replacing the ear pads
For reasons of hygiene, you should replace the ear pads from time to
time. Spare ear pads are available from your Sennheiser partner.
1. Peel the ear pad up and away from the ear cup.
2. Assign the right ear pad to the right ear cup and the left ear pad
to the left ear cup.
3. Place the new ear pad onto the ear cup. Make sure that the seam
of the ear pad points downwards.
4. Place the ear pad around the ear cup so that the ear pad is fixed
in the notch of the ear cup.
Information on the built-in rechargeable
battery
Sennheiser ensures and guarantees that the rechargeable battery
performs at its optimum upon purchase of the product. If, upon pur-
chase or within the warranty period, you suspect that the recharge-
able battery is obviously defective or if a charging error/battery error
is displayed (> 7), stop using the product, disconnect it from the
power supply system and immediately return the product to any
Sennheiser service partner.
Outside the warranty period, you can have the rechargeable battery
replaced for a fee by your Sennheiser service partner.
Contact your local Sennheiser partner:
www.sennheiser.com> “Service & Support”.
CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause a short-circuit
and damage the electronics.
Keep all liquids far away from the product.
Do not use any solvents or cleansing agents.
Right R
Care and maintenance
HD 350BT | 25
Installing firmware updates
Firmware updates can be downloaded free of charge from the Inter-
net using the Sennheiser Smart Control app. Sennheiser recom-
mends to always install the latest firmware version to ensure the
best performance of your product.
Connect the headphones to your smartphone and start the Smart
Control app (> 15).
The app provides information on available firmware updates and
guides you through the installation process.
FAQ/If a problem occurs ...
26 | HD 350BT
FAQ/If a problem occurs ...
Current list of frequently asked questions (FAQ)
Visit the HD 350BT product page at
www.sennheiser.com/download
There you will find a current list of frequently asked questions (FAQ)
and suggested solutions.
Your question has not been answered or the problem persists?
If a problem occurs that is not listed in the FAQ section or if the prob-
lem cannot be solved with the proposed solutions, please contact
your Sennheiser partner for assistance.
To find a Sennheiser partner in your country, search at
www.sennheiser.com > “Service & Support”.
Leaving the Bluetooth transmission range
Wireless calling and streaming are only possible in the Bluetooth
transmission range of your smartphone. The transmission range
largely depends on environmental conditions such as wall thickness,
wall composition etc. With a free line of sight, the transmission
range of most smartphones and Bluetooth devices is up to 10 meters.
If you, and therefore the headphones, leave the Bluetooth transmis-
sion range of the smartphone, the sound quality deteriorates
increasingly until you hear the voice prompt “Lost connection” and
the connection breaks down completely. If you immediately re-enter
the Bluetooth transmission range, the connection is automatically
re-established.
Deleting the Bluetooth pairing list of the headphones
1. Deactivate Bluetooth on your smartphone.
2. Switch the headphones off. To do so, press and hold the on/off
button for 2 seconds.
3. Switch the headphones on. To do so, press and hold the on/off
button for 4 seconds.
The LED on the headphones flashes red and blue. The head-
phones are in pairing mode.
4. Simultaneously press and hold the on/off button and the 3-way
multi-function button for 5 seconds.
The LED on the headphones flashes purple 3x. The pairing list is
deleted. The headphones then stay in Bluetooth pairing mode.
1 2
5s
Hold
ON
OFF
2s
Hold
4s
Hold
ON
Specifications
HD 350BT | 27
Specifications
Model: SEBT3
Bluetooth
Wearing style Bluetooth® around-ear
Ear coupling circum-aural
Transducer principle dynamic, closed-back
Transducer 32 mm
Frequency response 18 Hz to 22,000 Hz (-10 dB)
Sound pressure level (SPL) 108 dB (1 kHz/0 dBFS)
THD (1 kHz, 100 dB SPL) < 0.3 % (1 kHz, 100 dB SPL)
Microphone principle MEMS
Microphone frequency
response
80 Hz to 6,000 Hz (-3 dB)
Microphone pick-up pattern
(speech audio)
dual omni-directional microphones
2-mic beamforming array
Power supply built-in rechargeable lithium-polymer
battery: 3.7 V , 300 mAh
USB charging: 5 V , 320 mA max.
Charging time of
rechargeable battery
up to 2 hrs
Operating time 30 hrs (music playback via SBC) with
headphones' rechargeable battery
Temperature range operation: 0°C to +40°C
charging: +10°C to +40°C
storage: –20°C to +60 °C
Relative humidity operation: 10 to 80%, non condensing
storage: 10 to 90%
Weight (headphones) approx. 238 g
Magnetic field strength 1.9 mT
Version Bluetooth 5.0 compatible, class 1, BLE
Transmission frequency 2,402 MHz to 2,480 MHz
Modulation GFSK, π/4 DQPSK, 8DPSK
Output power 12.6 mW (max)
Profiles HSP, HFP, AVRCP, A2DP
Codec aptX, aptX LL, AAC, SBC
Manufacturer Declarations
28 | HD 350BT
Manufacturer Declarations
Warranty
Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months
on this product.
For the current warranty conditions, please visit our website at
www.sennheiser.com or contact your Sennheiser partner.
In compliance with the following requirements
General Product Safety Directive (2001/95/EC)
•Compliant to Sound Pressure Limits according to country spe-
cific requirements
EU declaration of conformity
RoHS Directive (2011/65/EU)
Hereby, Sennheiser electronic GmbH & Co. KG declares that the
radio equipment type SEBT3 is in compliance with the Radio Equip-
ment Directive (2014/53/EU).
The full text of the EU declaration of conformity is available at the fol-
lowing Internet address: www.sennheiser.com/download.
Notes on disposal
WEEE Directive (2012/19/EU)
Battery Directive (2006/66/EC & 2013/56/EU)
The symbol of the crossed-out wheeled bin on the product, the bat-
tery/rechargeable battery (if applicable) and/or the packaging indi-
cates that these products must not be disposed of with normal
household waste, but must be disposed of separately at the end of
their operational lifetime. For packaging disposal, please observe the
legal regulations on waste segregation applicable in your country.
Further information on the recycling of theses products can be
obtained from your municipal administration, from the municipal col-
lection points, or from your Sennheiser partner.
The separate collection of waste electrical and electronic equip-
ment, batteries/rechargeable batteries (if applicable) and packag-
ings is used to promote the reuse and recycling and to prevent neg-
ative effects caused by e.g. potentially hazardous substances
contained in these products. Herewith you make an important con-
tribution to the protection of the environment and public health.
Trademarks
Sennheiser is a registered trade mark of
Sennheiser electronic GmbH & Co. KG.
Apple, the Apple logo and Siri are trademarks of Apple Inc., regis-
tered in the U.S. and other countries. App Store is a service mark of
Apple Inc. Android and Google play are registered trademarks of
Google Inc. The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such marks
by Sennheiser electronic GmbH & Co. KG is under license.
Qualcomm aptX is a product of Qualcomm Technologies Interna-
tional, Ltd. Qualcomm is a trademark of Qualcomm Incorporated,
registered in the United States and other countries, used with per-
mission.
Manufacturer Declarations
HD 350BT | 29
aptX is a trademark of Qualcomm Technologies International, Ltd.,
registered in the United States and other countries, used with per-
mission.
Other product and company names mentioned in the user documen-
tation may be the trademarks or registered trademarks of their
respective holders.
Manufacturer Declarations
30 | HD 350BT
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sennheiser HD350BT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sennheiser HD350BT in de taal/talen: Engels als bijlage per email.

De handleiding is 5,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Sennheiser HD350BT

Sennheiser HD350BT Snelstart handleiding - Nederlands, Deutsch, English, Français, Italiano, Português, Espanõl, Dansk, Svenska - 3 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info