759121
5
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
06/2017
- 5 - Copyright © 2017, Fast ČR, a.s.
EN
Variable Temperature
Electric Kettle
User'smanual
Prior to using this appliance, please read the usersmanual thoroughly, even
in cases, when one has already familiarised themselves with previous use of
similar types of appliances. Only use the appliance in the manner described
in this user’smanual. Keep this user’smanual in asafe place where it can be
easily retrieved for future reference.
We recommend saving the original cardboard box, packaging material,
purchase receipt and responsibility statement of the vendor or warranty card
for at least the duration of the legal liability for unsatisfactory performance
or quality. In the event of transportation, we recommend that you pack the
appliance in the original box from the manufacturer.
DESCRIPTION OF THE KETTLE
A1 Lid lock
serves to safely close the lid.
A2 Lid
A3 Spout
A4 Removable ltration strainer
is located inside the kettle.
A5 Water level mark
A6 Base with acentral connector
A7 LED display
A8 Control buttons
A9 Handle
DESCRIPTION OF THE DISPLAY AND CONTROL BUTTONS
B1 Display current or set
temperatures
B2 Keep Warm mode indicator
B3 Decrease temperature button
B4 On/O button
B5 Increase temperature button
B6 Button for setting and ending
the Keep Warm mode
Note:
Buttons B3 and B5 can be used to set 10 temperature levels in the
range from 45 to 90 °C. In the set temperature mode, the temperature
changes by 5 °C each time the button is pressed.
BEFORE FIRST USE OF THE KETTLE
1. Remove all wrapping material from the kettle and its base A6.
2. Fill the kettle with clean water up to the maximum water mark. Boil the water
and empty the contents of the kettle. Repeat this process 2 to 3 times.
Note:
To boil water in the electric kettle proceed according to the instructions
in chapter Using the kettle.
3. Now the kettle is ready for operation.
USING THE KETTLE
1. Set the desired length of the power cord. Push the power cord into the groove
in the base A6. Place the base A6 on astable, even and clean surface.
2. Pull on the lid lock A1 to release and open the lid A2. Fill the kettle with the
required amount of water. The water level must reach at least the minimum
mark (0.5l) and must not exceed the maximum mark (1.7l). After lling it, close
the lid A2 and make sure that it is secured in the closed position.
Attention:
Do not ll the kettle when it is placed on the base A6.
When lling the kettle, there is arisk of water splashing out.
3. Place the kettle on the base A6 and insert the power cord plug into apower
socket. When the power cord is connected to apower socket, the LED display
A7 is lit for amoment and ashort beep is made. Then the kettle will switch to
stand-by mode and is ready for use.
4. Operating mode settings:
4.1 Boil water mode
To start the water boiling process, press button B4. Abeep is made when the
button is pressed. The kettle is put into operation and starts heating the water
to 100 °C. During the water boiling process, “100” is ashing on the display A7.
When the water comes to aboil, the kettle will turn o automatically. It will
beep 5 times and the display A7 will turn o.
Note:
The water boiling process can be stopped at any time by again pressing
button B4.
4.2 Boil water combined with Keep Warm mode
First, use the buttons B3 and B5 to set the temperature at which the water is
to be maintained in the Keep Warm mode after being boiled. The temperature
can be set in the range from 45 to 90 °C. When either button B3 or B5 is
pressed for the rst time, the current water temperature inside the kettle
will be shown on the display A7. Press the button again to switch to the set
water temperature mode. The default preset water temperature of 60 °C or
the previously set water temperature will be shown on the display A7. When
button B3 or B5 is pressed again, the temperature setting will decrease or
increase by 5 °C. When the temperature is set, press button B4 and B6 in any
order. “100” will ash on the display A7 and indicator B2 will be lit, and the
water boiling process will start. Once the water has come to aboil, the kettle
will beep 5 times and automatically switch to the Keep Warm mode. The
temperature set for the Keep Warm mode will be shown on the display A7
and indicator B2 will be lit. In this mode, the heating element automatically
switches on and o to maintain the set temperature. Switching of the heating
element is indicated by the ashing item on the display A7. The time of the
Keep Warm mode is preset to 240 minutes. After this time has elapsed, the
kettle will turn o automatically. If you wish to end this mode sooner, press
button B6.
Note:
If you set atemperature and do not press button B6 or B4 within ashort
period, the kettle will switch back to the stand-by mode and the display
A7 will turn o.
If you press button B4 during the water boiling process, the boil water
mode will end immediately and the kettle will switch to the Keep Warm
mode.
The set temperature can be adjusted during the Keep Warm mode.
4.3 Heat water to set temperature then Keep Warm mode
Use buttons B3 and B5 to set the temperature in the range from 45 to 90 °C.
When either button B3 or B5 is pressed for the rst time, the current water
temperature inside the kettle will be shown on the display A7. Press the button
again to switch to the set water temperature mode. The default preset water
temperature of 60 °C or the previously set water temperature will be shown on
the display A7. When button B3 or B5 is pressed again, the temperature setting
will decrease or increase by 5 °C. To start the process of heating water to aset
temperature, press button B6. Indicator B2 will be lit and the temperature value
will ash on the display A7. When the set temperature is reached, the value
on the display A7 will stop ashing and the kettle will automatically switch
to the Keep Warm mode. During the Keep Warm mode, the heating element
automatically switches on and o to maintain the set temperature. Switching
of the heating element is indicated by the ashing item on the display A7.
The time of the Keep Warm mode is preset to 240 minutes. After this time has
elapsed, the kettle will turn o automatically. If you wish to end this mode
sooner, press button B6.
Note:
The operation can be stopped at any time by again pressing button B6.
If you set atemperature and do not press button B6 to start the water
heating process within ashort period, the kettle will switch back to the
stand-by mode and the display A7 will turn o.
If you set atemperature that is lower than the current temperature of
the water inside the kettle, then after button B6 is pressed, the value
on the display A7 will be lit. This indicates that the set temperature
has already been reached. As soon as the water cools down to the set
temperature , it will be maintained at this temperature.
The set temperature can be changed while the appliance is running.
Attention:
If the kettle is not located on the base A6, the control buttons A8 will
not react to being pressed.
Lifting the kettle o the base A6 will cancel all previous settings. When
the kettle is put back on the base A6, the kettle will switch to stand-by
mode and is again ready for use.
This kettle is not calibrated for scientic or laboratory purposes.
The actual water temperature may dier by ±5 °C from the set water
temperature.
Attention:
Do not turn on the kettle when it is empty. Incorrect use may negatively
aect its lifetime. If you accidentally turn on the kettle without water
inside, after ashort time the display A7 will turn o and the kettle will
turn o. Wait until the heating element cools down. This is indicated by
abeep and the display A7 being lit for ashort time. Then the kettle will
switch to stand-by mode and is again ready for use.
5. Pour the boiled or heated water into aprepared container, cup or mug. Make
sure that the kettle remains in avertical position when it is carried, particularly
if it is lled all the way up to the maximum mark.
6. If you wish to rell the kettle, be especially careful when opening the lid A2 to
avoid scalding by the escaping steam.
7. After you nish using it, disconnect the power cord from the power socket.
Empty the kettle and allow it to cool down.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SWK 1760 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SWK 1760 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info