684598
6
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
04/2017
- 6 -
Copyright © 2017, Fast ČR, a.s.
EN Bagless Vacuum Cleaner
User'smanual
Prior to using this appliance, please read the usersmanual thoroughly, even
in cases, when one has already familiarised themselves with previous use of
similar types of appliances. Only use the appliance in the manner described in
this user’smanual. Keep this usersmanual in asafe place where it can be easily
retrieved for future use.
We recommend saving the original cardboard box, packaging material,
purchase receipt and responsibility statement of the vendor or warranty card
for at least the duration of the legal liability for unsatisfactory performance
or quality. In the event of transportation, we recommend that you pack the
appliance in the original box from the manufacturer.
DESCRIPTION OF THE VACUUM CLEANER AND ITS ACCESSORIES
A1 Handle
A2 Lid
the micro-filter is located under
the lid.
A3 Lid open clip
A4 On/Off button of the vacuum
cleaner
A5 Full dust container indicator
A6 Rubber-coated side travel wheel
A7 Removable 1.3-litre dust
container
A8 Flexible hose connection hole
A9 Lock-in clip
serves to secure the dust
container in the vacuum cleaner.
A10 Automatic power cord winding
button
A11 Groove for the horizontal
parking position
A12 Power cord
A13 Removable grill of the outflow
EPA filter
A14 Washable outflow EPA filter
is placed behind the grill.
A15 Front swivel travel wheel
A16 Rear travel wheel
A17 Motor filter
A18 Dust container open clip
A19 Sealing ring
A20 Micro-filter
A21 Flexible hose with mechanical
suction power control in the
handle
A22 Telescopic metal tube
A23 Floor nozzle with an extensible
brush
A24 Flap for extending and retracting
the brush
A25 Crevice nozzle
A26 Brush nozzle
A27 Upholstery nozzle
INTENDED USE OF THE ACCESSORIES
The universal floor nozzle with an extensible brush A23 is intended for all floor
types. Extend the brush when vacuuming smooth hard floors, and retract it
when vacuuming carpets. Use flap A24 to extend and retract the brush.
The crevice nozzle A25 makes vacuuming corners and hard to reach places
much easier; the brush nozzle A26 can be used for various types of furniture
and nozzle A27 serves to gently vacuum upholstered furniture.
PREPARING FOR USE
Make sure that the dust container A7, motor filter A17, micro-filter A20 and the
outflow EPA filter A14 are properly installed in the vacuum cleaner
Slide the end of the flexible hose A21 fully into the hole A8. The hose A21 is
secured in place when an audible click is made.
Note:
Prior to disassembly, it is necessary to press the latches on the hose end
A21 while simultaneously pulling it out of the hole A8.
Attach the telescopic tube A22 on to the handle of the flexible hose A21. Slide
the clip on the telescopic tube A22 in the direction of the arrow marked on the
extension locking clip on the telescopic tube A22. After unlocking the locking
clip, set the length of the tube A22 by sliding its extensible part in or out. When
the clip is released, it will lock in at the set length.
Connect the floor nozzle A23 to the free end of the telescopic tube A22.
The crevice nozzle A25, brush nozzle A26 and upholstery nozzle A27 can be
attached directly to the handle of the flexible hose A21 or to the telescopic
tube A22.
USING THE VACUUM CLEANER
Pull on the power plug to wind out the required length of the power cord A12
and connect it to apower socket.
Attention:
The yellow mark on the power cord A12 indicates the approaching end
of its length, and the red mark indicates the complete end of its length.
Do not attempt to pull the power cord A12 past this mark.
To start the vacuum cleaner, press button A4. Suction power can be set using
the mechanical flap on the handle of the flexible hose A21.
The rubber-coated wheels protect floating floors against scratching and ensure
smooth motion of the vacuum cleaner on the floor.
When you have finished using the vacuum cleaner, turn it off by pressing button
A4 and disconnect the power cord A12 from the power socket. To wind the
power cord A12 back into the vacuum cleaner, press and hold button A10 until
its entire length is wound up. Gently hold the power cord A12 with one hand
while winding it up.
Note:
If the power cord A12 is not wound up completely, release button
A4, and pull the power cord A12 out of the vacuum cleaner by
approximately 50cm and then try to wind it up again.
PARKING POSITION OF THE VACUUM CLEANER
When not using the vacuum cleaner, you may put it in the parking position by
sliding the guide tab on the floor nozzle A23 into the groove A11, see fig. B.
Do not carry the vacuum cleaner from place to place if the hose is in the parked
position. The guide tab on the floor nozzle A23 could brake off.
MAINTENANCE AND CLEANING
Before cleaning it, always make sure that the vacuum cleaner is turned off and
disconnected from the power socket.
Emptying and cleaning the dust container
The red-coloured indicator A5 signals that it is necessary to empty out the dust
container A7.
Release the lock-in clip A9 and pull on the handle A1 to remove the dust
container A7 from the vacuum cleaner. Place it over adust bin and press the
dust container open clip A18, see figure C1. This will open the tilt-out bottom
and dump out the contents of the container A7. Gently tap on the sides of
the container A7 to release any accumulated dirt. For hygiene reasons, we
recommend emptying out the dust container A7 away from living areas.
Hold the container A7 with one hand and with your other hand turn the handle
A1 in the direction of the open padlock symbol that is marked on the container
A7. Remove the top part containing the cyclone unit from the dust container
A7, see figure C2. Wash the container A7 under lukewarm running water
and thoroughly wipe it dry.Assemble the container A7 and close its bottom.
Reinsert the assembled container A7 back into the vacuum cleaner and make
sure that it is properly secured in the vacuum cleaner.
Cleaning and replacing the motor filter, micro-filter and the outflow EPA
filter
Remove the dust container A7 from the vacuum cleaner. If the motor filter A17
is visibility soiled, tap it out or wash it under lukewarm running water and allow
it to dry naturally. Install the filter A17 and container A7 back into the vacuum
cleaner. In the event that the motor filter A17 is showing signs of wear or it is
heavily soiled, replace it with anew one.
Open the lid A2, remove the micro-filter A20 and tap out its contents or wash
it under aweak current of running lukewarm water and allow it to dry naturally.
Make sure that the micro-filter A20 is seated in the sealing ring A19 and put it
back in its place. Close the lid A2. In the event of heavy soiling or wear and tear,
replace the used micro-filter A20 with anew one.
Release and remove the grill A13. Remove the EPA filter A14 from the vacuum
cleaner. In the case of light soiling, tap it out. In the event of heavy soiling, wash
it under aweak current of running lukewarm water so that the water washes the
dirt out of the folds. Allow the EPA filter A14 to dry naturally, then reinsert it and
secure it in place with the grill A13. It is recommended to replace the EPA filter
with anew one after 6 months of use.
When filters are soiled, their effectiveness is reduced, so do not neglect their
cleaning and ensure their timely replacement.
Note:
For hygiene reasons, we recommend that you tap out the filters away
from living areas.
Attention:
Before putting the filters back into the vacuum cleaner, make sure that
they are completely dry.
Cleaning the flexible hose, telescopic tube, floor nozzle, crevice nozzle, brush
nozzle and upholstery nozzle.
If the accessories are soiled, take them out and clean away all dirt (dust, hair,
animal fur, etc.).
Cleaning the outer surface of the vacuum cleaner
Clean the outer surface using adry or alightly dampened cloth. Then wipe it
thoroughly dry.
For cleaning the vacuum cleaner, do not use steel wool, abrasive cleaning
products, solvents etc.
Do not submerge the vacuum cleaner under water or any other liquid and do
not rinse it under running water.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SVC 1040 SL bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SVC 1040 SL in de taal/talen: Engels als bijlage per email.

De handleiding is 1,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sencor SVC 1040 SL

Sencor SVC 1040 SL Gebruiksaanwijzing - Nederlands - 7 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info