759494
6
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
- 6 - 07/2019
2019
EN
2-in-1 Cordless vacuum
cleaner
User'smanual
Prior to using this appliance, please read the user'smanual thoroughly,
even in cases, when one has already familiarised themselves with
previous use of similar types of appliances. Only use the appliance in
the manner described in this user’smanual. Keep this user'smanual in
asafe place where it can be easily retrieved for future use.
We recommend saving the original cardboard box, packaging material,
purchase receipt and responsibility statement of the vendor or warranty
card for at least the duration of the legal liability for unsatisfactory
performance or quality. In the event of transportation, we recommend
that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE VACUUM CLEANER AND ITS
ACCESSORIES
A1 On/Off button of the upright
vacuum cleaner
A2 Suction power adjustment
button of the upright vacuum
cleaner
A3 Button for releasing the hand
vacuum cleaner
A4 On/Off button of the hand
vacuum cleaner
A5 Dust container release button
A6 Floor nozzle
A7 Rechargeable battery
A8 Handle of the hand vacuum
cleaner
A9 Washable internal HEPA type
filter.
A10 Washable external filter
A11 Dust container
A12 Multi-purpose crevice nozzle
with an extensible brush
A13 Power adapter
A14 Floor nozzle rotary brush
A15 Wiping attachment
A16 Water tank lid
A17 Water / cleaning solution tank
A18 Water control button (CLOSE/
OPEN)
A19 Removable Velcro zip sleeve
BEFORE FIRST USE
Before first use, take the appliance and its accessories out of the
packaging material and remove all promotional labels and stickers.
Check that neither the appliance nor any of its parts is damaged.
ASSEMBLY
For reasons of safety during transport, the upright vacuum cleaner is
supplied disassembled.
Attach the handle of the upright vacuum cleaner to the body of the
vacuum cleaner so that the handle is aligned with the hole in the body
of the vacuum cleaner. Insert the supplied screw into the hole and
screw it in properly. Check than the handle is correctly attached and
not moving in any way.
Into the empty area in the body of the vacuum cleaner, insert the
assembled hand vacuum cleaner.
CHARGING THE VACUUM CLEANER
Insert the connector of the power adapter A13 into the socket located
at the rear part of the floor nozzle A6, and insert the plug of the power
adapter A13 into apower socket.
Note:
Prior to starting recharging, it is important for the vacuum
cleaner to be turned off and standing in the vertical parking
position. Do not turn on the vacuum cleaner when it is being
recharged and the power adapter A13 is connected to the
power socket.
When the adapter A13 is connected to apower socket, the vacuum
cleaner will switch to the charging mode. The indicator light on
the battery A7 will be lit and the LED diodes on the battery A7 will
gradually light up. Afull charge requires approximately 5hours. The
actual charging time depends on the power level of the battery.
Once the charging process is complete, all the diodes will be lit.
Disconnect the adapter A13 from the power socket and the connector
of the adapter A13 from the vacuum cleaner.
The LED diodes signal the battery power level. The individual
LEDdiodes will turn off as the battery gradually discharges. When the
battery is almost flat, the bottom LED diode will start flashing. When it
turns of completely, the battery is completely flat.
Note:
This vacuum cleaner contains aLi-ion battery. To ensure the
longest possible lifetime of the battery, we recommend:
- Do not unnecessarily leave the battery fully charged or
completely flat for too long.
- Do not keep the battery permanently fully charged. Its
lifetime will be extended by keeping it at approximately
half charge.
- Do not fully discharge the battery.
PARKING POSITION OF THE VACUUM CLEANER
Put the upright vacuum cleaner into the parking position by placing the
tip of your foot on top of the floor nozzle A6 and with asimple forward
movement of the handle secure the vacuum cleaner in the vertical
position. The latch located at the front on the elbow of the floor nozzle
A6 will slide into the groove on the top cover of the floor nozzle A6.
To release the upright vacuum cleaner from the parking position, place
the tip of your foot on top of the floor nozzle A6 and tilt the handle
backwards. The latch located at the front on the elbow of the floor nozzle
A6 will slide out of the groove on the top cover of the floor nozzle A6.
USING THE VACUUM CLEANER
Before cleaning it, always make sure that the vacuum cleaner is turned
off and disconnected from the power socket.
Upright vacuum cleaner
You may use the upright vacuum cleaner for vacuuming various types
of floor coverings such as for example hard floor coverings, carpets, etc.
Hold the vacuum cleaner by the handle and release it from the parking
position. After releasing it from the parking position, the handle may be
moved in the vertical direction.
Start the vacuum cleaner by pressing button A1. The vacuum cleaner
will start at full suction power. If you need to reduce the suction power,
press button A2. The suction power of the vacuum cleaner will be
reduced. Press button A2 again to again increase the suction power.
When you have finished using it, turn off the vacuum cleaner by
pressing button A1. Clean it according to the instructions contained in
chapter "Cleaning and maintenance", and allow it to charge according
to the instructions contained in chapter "Charging the vacuum
cleaner".
In the event that the rotary brush is clogged while vacuuming, e.g.
by a larger amount of vacuumed hair or fur, the automatic safety
mechanism is activated, which will stop the rotary brush to prevent it
from becoming damaged. Turn off the vacuum cleaner using button A1
and remove the wound on hair or fur from the rotary brush – more in
chapter "Cleaning and maintenance". Prior to turning on the vacuum
cleaner again, check that the rotary brush A14, the dust container A11
and the filters A9 andA10 are clean.
Hand vacuum cleaner
The hand vacuum cleaner is suitable for vacuuming locally soiled floor
coverings, furniture, etc.
In order to remove the hand vacuum cleaner from the body of the
upright vacuum cleaner, press button A3 and the top part of the hand
vacuum cleaner will be released. Hold the hand vacuum cleaner by the
handle A8 and carefully remove it from the body of the upright vacuum
cleaner.
Turn on the hand vacuum cleaner by pressing button A4.
For more comfortable vacuum cleaning, e.g. of furniture, put the multi-
purpose crevice nozzle A12 on to the hand vacuum cleaner. Use the
slider on the nozzle to control the extension and retraction of the brush.
When you have finished using it, turn off the vacuum cleaner using
button A4. Clean it according to the instructions contained in chapter
"Cleaning and maintenance", and insert it back into the body of
the upright vacuum cleaner. Allow it to recharge according to the
instructions in chapter "Charging the vacuum cleaner".
Using the wiping attachment
Attach the sleeve A19 to the bottom surface of the attachment A15.
Place the wiping attachment A15 with the attached sleeve A19 on the
floor. Remove the lid A16 and pour water or acleaning agent solution
into the tank A17. Put the lid A16 back on.
Place the vacuum cleaner on to the wiping attachment A15 so that
the tabs on the attachment A15 are aligned with the holes on the
underside of the floor nozzle A6. The travel wheels should fit into the
body of the attachment A15 – see fig B. Gently push on the vacuum
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SVC 0740 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SVC 0740 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info