Handleiding Sencor STM 6353 (pagina 9 van 10) (Engels)

758536

Verklein

Vergroot

Pagina terug

1/10

Pagina verder

05/2017

- 9 -

USING THE COOKIE MAKER ATTACHMENT

1. Place the prepared dough on to the hopper B2. Slide the cookie maker B15 to the left or

right to set the desired cookie shape.

2. Insert the power plug into a power socket. Set the required speed using the speed

control knob A12. When starting it for the rst time, we recommend that you set speed 3

and then increase or decrease it as required.

3. Use the pusher B1 to push the dough through the feed tube B3. The food processor will

push the dough out in the required shape that you set using the cookie maker B15.

We recommend that you place atray or your palm underneath the pushed out dough.

Then cut the formed dough into smaller pieces.

Attention:

Do not use ngers or other items to push the dough in. Always use the pusher B1.

4. When you have nished using the food processor, turn it o by setting the speed control

knob A12 to the OFF position.

5. Clean out the attachment after each use according to the instructions in chapter

Cleaning and maintenance.

BLENDING

ASSEMBLING AND DISASSEMBLING THE BLENDER

1. From underneath, insert the blade assembly C6 into the blending jar C4 and screw it in

clockwise all the way.

2. On to the blending jar C4, place the outer lid C2 so that its edges copy the neck of the jar,

and push it down thoroughly along its entire perimeter. Into the hole in the lid C2, place

the inner cap C1 and push it down all the way.

Note:

Do not remove the cu C5 from the blending jar C4.

3. Make sure that the food processor is turned o and disconnected from the power

socket. The multi-function head A7 must be tilted down in the horizontal position and

the whisk, beater or kneading attachments must be removed. Release and remove the

top attachment hub cover A6. Place the assembled blending jar on to the top hub and

pulling it gently turn it in the direction of the symbol all the way. The safety mechanism

will prevent the blender from starting unless it is correctly secured to the multi-function

head A7.

4. To disassemble proceed in the reverse sequence.

USING THE BLENDER

1. The blender is intended for preparing meals and drinks such as milkshakes, creamy

soups, sauces, spreads, fresh baby foods, etc. It is not intended for juicing fruit and

vegetables, preparing potato purée, yeast dough or for whipping egg whites.

2. Assemble the blender according to the instructions in chapter Assembling and

disassembling the blender, and put the ingredients (larger pieces need to be cut up in

advance) into the blending jar C4.

Note:

The maximum capacity of the blending jar C4 is 1.5 litres. Never ll it past the

maximum mark. When processing hot liquids or liquids that expand in volume

during the blending process, it is recommended to ll the blending jar to no more

than ⅔ of its maximum capacity.

3. Make sure that the food processor is correctly assembled and that the speed control

knob A12 is set to the OFF position. Connect the power cord to apower socket. Set the

required speed using the speed control knob A12. We recommend to rst set aslower

speed to allow the ingredients to mix together. Then the speed may be increased.

The pulse level is appropriate when you wish to blend food only very quickly. To start

the pulse level, turn the speed control knob A12 to the PULSE position and hold it in

this position for amoment. As soon as you release the speed control knob A12, it will

automatically return to the OFF position.

Attention:

The maximum operating time of the blender is 2 minutes. Do not leave the

appliance in continuous operation for longer than indicated above. Then allow it

to cool down for 30 minutes.

4. While blending, you may add food or liquids to the blending jar C4 through the hole in

the lid C2 after removing the inner cap C1. Never open the outer lid C2 during operation.

When processing hot liquids, the inner cap C1 must remain closed.

5. In the event that food is sticking to the blade assembly C6 or the walls of the blending jar

C4, turn the appliance o by turning the speed control knob A12 to the OFF position and

disconnect it from the power socket. Make sure that the blade assembly C6 has stopped

rotating. Carefully remove the assembled blending jar from the multi-function head A7

by turning it in the direction of the symbol . Take o the lid and using aplastic spatula,

clean the blade assembly C6 and the inside of the blending jar C4. Put the lid back on and

reattach the blender assembly to the multi-function head A7. Plug the power cord into

apower socket and continue blending.

6. After you have nished using the appliance, set the speed control knob A12 to the OFF

position and disconnect the power cord from the power socket. Check that the blade

assembly C6 has stopped rotating and carefully take the blending jar assembly o the

multi-function head A7. Put the cover A6 back in its place and use asoft plastic spatula

to remove food from the blending jar C4.

7. Disassemble the assembled bowl and clean the individual parts after each use according

to the instructions in chapter Cleaning and maintenance.

ADVICE AND TIPS FOR BLENDING

■ First cut food with arm consistency such as fruit and vegetables into smaller pieces

measuring 3 cm and only then blend it.

■ First, blend asmaller amount of ingredients and then gradually add more ingredients

through the hole in the lid C2 while blending. In this way, you will achieve better results

than by adding all ingredients into the blending jar C4 at once.

■ If you need to blend food of asolid consistency together with liquids, we recommend

that you rst blend the food of solid consistency and apart of the liquids. Then gradually

add the remaining liquids through the hole in the lid C2 while blending.

■ To blend very thick liquids, we recommend using the pulse level so that the blade

assembly C6 does not get jammed too often. Start the blender repeatedly in short

intervals.

■ Ice cubes must be processed immediately upon being removed from the freezer. When

the ice starts to melt, the ice cubes will stick together and it will not be possible to blend

them.

QUICK GUIDE TO PROCESSING INGREDIENTS

Ingredients Speed selection Recommended

blending time

Fruit, vegetables cut into smaller pieces 5–6 30 s

Baby food 5–6 40 s

Spreads, dressings, marinades 3–4 30 s

Smoothies and cocktails 6 to MAX 40 s

Soups 6 to MAX 30 s

Ice cubes PULSE

Note:

The above food processing times are only areference. The actual blending time

depends on the size of the ingredients, their amount and the required nal

consistency.

CLEANING AND MAINTENANCE

■ Before cleaning the food processor, always switch it o by setting the speed control knob

A12 to the OFF position and disconnect it from the power socket.

■ Disassemble the food processor into its individual parts. Wait until moving parts come to

acomplete stop before disassembly.

■ Thoroughly wash the used removable parts after every use using warm water with

aneutral dishwashing detergent. Then rinse them under clean running water and wipe

them dry with a ne wiping cloth or allow them to dry naturally. After washing and

drying, we recommend to coat the grinding blade B6 and the grinding plates B8, B9

andB10 with cooking oil.

■ If you whisked egg whites, rst rinse the bowl A10 and the beater A4 under cold water. If

you were to use hot water, the egg white remains would harden and their removal would

be more dicult.

■ The metal parts of the meat grinder and attachments A3–A5 are not intended for

washing in adishwasher. Other removable parts may be washed in adishwasher.

■ For cleaning the base unit A11 and the multi-function head A7, use acloth lightly dipped

in aweak detergent solution. Then wipe everything with aclean dampened cloth and

thoroughly wipe dry.

■ For cleaning, do not use solvents or cleaning agents with abrasive eects. Otherwise, the

surface of the appliance may be damaged.

■ Do not submerge the food processor or its power cord in water or any other liquids.

STORAGE

■ When not using the food processor, store it in aclean, dry place out of children’sreach.

Make sure that the multi-function head A7 is tilted down into the horizontal position.

TECHNICAL SPECIFICATIONS

Rated voltage range ......................................................................................................................... 220−240 V

Rated frequency.................................................................................................................................... 50/60 Hz

Rated power input ................................................................................................................................. 1 000 W

Electrical shock protection class ..................................................................................................................... II

Noise level ................................................................................................................................................ 85 dB(A)

The declared noise emission level of the appliance is 85 dB(A), which represents alevel Aof

acoustic power with respect to areference acoustic power of 1 pW.

Explanation of technical terminology

Safety class for electrical shock protection:

Class II – Electrical shock protection is provided by double or heavy-duty insulation.

Sencor STM 6353 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Sencor STM 6353

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info