758521
8
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
EN-8
EN
Food Processor
STM 40WH / STM 41GR / STM 42BL / STM 43OR
STM 44RD / STM 45VT / STM 46YL / STM 47GG / STM 48RS
2014
11/2014
BLENDING, WHIPPING AND KNEADING
PLANETARY MIXING SYSTEM
The planetary mixing system is based on the principle of dual rotation of the attachment. The
attachment rotates anticlockwise along the inner perimeter of the bowl while rotating around
its own axis in the opposite direction. This ensures that ingredients are processed thoroughly and
evenly.
SELECTING ATTACHMENT TYPES
ATTACHMENT TYPE APPLICATION
Kneading hook A1It is used for kneading and preparing heavy and thick doughs containing
yeast, e.g. bread dough.
Beater A3It is used for mixing medium heavy and lighter doughs not containing yeast,
for mixing sauces, creams, fi llings, etc.
Whisk A2It is used for whisking whole eggs or egg whites, whipped cream, light
doughs, foamy creams, etc. Do not use it for mixing heavy and thick doughs.
ASSEMBLING AND DISASSEMBLING THE FOOD PROCESSOR
Before you start assembling or disassembling the food processor, check that it is turned off and
disconnected from the el. power socket.
1. Inserting the mixing bowl
1.1 Place the food processor on an even, dry surface, for example on a kitchen countertop.
1.2 Slide button A0 upwards and hold it there. Tilt out the arm A8. To lock the arm A8 in the open
position, release button A0.
1.3 Place the stainless steel bowl A4 into the hole in the base unit A5 and secure it in place by turning
it clockwise. When the bowl A4 is properly attached, it is not possible to lift it off the base unit
A5.
2. Attaching an attachment (kneading hook, beater or whisk)
2.1 When attaching an attachment, the arm A8 must be secured in the open position, see point 1.2
in chapter Inserting the mixing bowl. Attach one of the attachments on to the shaft of the mixing
head A9 so that the shaft A9 ts into the hole on the attachment. Push the attachment towards
the mixing head A8 and turn it anticlockwise to secure it to the shaft A9.
2.2 With one hand, hold the attachment and gently pull it downwards. If it is properly secured to the
shaft A9, it will not come off.
2.3 If you will not be immediately placing ingredients into the mixing bowl A4, slide the button A0
upwards, hold it down and tilt the arm A8 to the horizontal position. After tilting the arm A8 to
the horizontal position, release the button A0.
3. Removing the attachments and mixing bowl
3.1 Slide button A0 upwards and hold it there. Tilt out the arm A8. To lock the arm A8 in the open
position, release button A0.
3.2 Hold the attachment and gently push it against the mixing head A8. Then rotate it clockwise until
it is released from the shaft A9 and take it off. Turn the mixing bowl A4 anticlockwise and take
it off the base unit A5. Move the arm A8 back to the horizontal position.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor STM 46 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor STM 46 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info