758984
10
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
- 10 - 06/2019
Copyright © 2019, Fast ČR, a.s.
If the lid is not properly closed, the pressure cooker will not permit the cooking process to start.
If the removable inner pot is not inserted, it will not be possible to start the cooking process.
The temperature sensor A24 monitors the temperature inside the pressure cooker and automatically adjusts the temperature of the cooking
process. If for any reason the temperature inside the pressure cooker were to exceed acertain limit, the pressure cooker will automatically
disconnect the power supply and will not permit cooking to continue.
In the event of overvoltage from the mains power supply, afuse will disengage the circuit and thereby protect the electrical system of the
pressure cooker against damage.
PREPARING FOR COOKING
Place the pressure cooker on an even, rigid surface. Do not place the pressure cooker on metal underlays.
Open the lid as described in chapter CORRECT HANDLING OF THE LID.
Make sure that the inside of the built-in outer pot A19 including the hotplate A23 is clean and free of any food remains.
Place the removable pot A14 into the built-in outer pot and gently turn it to both sides to ensure that it is seated on the hotplate.
Place the ingredients and water if necessary into the removable pot so that the entire contents do not go over the MAX mark shown on the
inside of the pot. To ensure its proper operation and prevent its damage, the pot must be filled up to at least the bottom mark on the scale. In
the event that the edges or the outer parts of the built-in outer pot A19 or the inner pot A14 are soiled, clean them thoroughly.
Close the lid as described in chapter CLOSING THE LID.
TURNING ON THE PRESSURE COOKER
Insert the plug of the power cord A25 all the way into the connection socket A22 on the side of the pressure cooker. Connect the power cord
plug to apower socket. The pressure cooker will beep and switch to stand-by mode.
STAND-BY MODE
The stand-by mode means that the pressure cooker is ready for use. If the lid is locked, the display will show four dashes. If the lid is unlocked,
the display will show the text "OPEN".
Set the pressure cooker to stand-by mode after connecting it to the power supply or by pressing button B15 (Start/Cancel) at any time while
the pressure cooker is running.
COOKING
Attention:
Before and during cooking, always check that the steam release valve A7 is not covered, e.g. by awiping cloth.
QUICK OVERVIEW OF THE PRESSURE COOKER'SCONTROLS
Use the control knob B6 to select acooking program.
Adjust the cooking parameters according to your own discretion using the respective buttons and the control knob or leave the default preset
parameters.
Start the cooking process by pressing button B15 (Start/Cancel).
You can cancel the cooking process or the manually set cooking values by holding down button B15 (Start/Cancel) for longer than 2seconds.
When the pressure cooker completes the cooking process it will automatically switch to the keep warm mode. The only exception are the
programs (fry) and (yoghurt), after the completion of which the pressure cooker will switch to the stand-by mode.
POSITION OF THE STEAM RELEASE VALVE DURING THE COOKING PROCESS
Prior to starting the cooking process, turn the steam release valve A7 to the cooking position C1. The pressure cooker will automatically control
the release of steam.
If you wish to release all the steam from the pressure cooker, e.g. for the purpose of opening the lid, turn the valve to the steam release position
C2. The pressure cooker will start to continuously release steam.
Warning:
When releasing steam, keep away from the escaping steam to avoid being scalded. Never place your hands, arms or face in the
vicinity of the pressure control valve when it is releasing steam.
AUTOMATIC COOKING USING PRESET PROGRAMS
The electric pressure cooker has 10 smart cooking programs. Each of them has its predefined cooking time, temperature and pressure level to
enable you to easily achieve the best possible results.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SPR 3900 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SPR 3900 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info