756622

Sencor SLE 42F16TCS Handleiding

25
Verklein
Vergroot
Pagina terug
1/53
Pagina verder
LED TV
SLE 42F16TCS
SLE 43F16TCS
USER’S MANUAL
EN
EN 1
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Contents
PLEASE, READ THESE INSTRUCTIONS BEFORE STARTING TO OPERATE THE
TELEVISION. STORE IT FOR LATER REFERENCE. NOTE DOWN THE MODEL NUMBER
AND THE SERIAL NUMBER OF THE TV SET. LOOK AT THE LABEL ON THE BACK
COVER AND PASS THE INFORMATION PROVIDED THERE TO YOUR DEALER IN CASE
THAT YOU WOULD NEED SERVICING.
Contents
1. Important safety instructions ..................................................................................................................2
2. Assembling the stand ...............................................................................................................................8
3. Device .......................................................................................................................................................... 9
3.1. Button functions of the control panel....................................................................................................9
3.2. Connecting the TV connectors ................................................................................................................9
4. Remote control .......................................................................................................................................... 11
5. Turn on first time ..................................................................................................................................... 13
5.1. Language selection .................................................................................................................................. 13
5.2. Country selection ...................................................................................................................................... 13
5.3. Automatic tuning .......................................................................................................................................14
6. Menu ...........................................................................................................................................................16
6.1. Channel Menu – satellite ........................................................................................................................16
6.2. Channel menu – ATV/DTV .................................................................................................................... 19
6.3. Picture Menu .............................................................................................................................................22
6.4. Sound menu ............................................................................................................................................. 25
6.5. Time menu .................................................................................................................................................27
6.6. Lock menu ................................................................................................................................................ 29
6.7. Hotel mode ............................................................................................................................................... 32
6.8. Setup menu .............................................................................................................................................. 33
6.9. ATV Channel menu ................................................................................................................................. 38
6.10. Component Input / HDMI / AV menu ................................................................................................39
7. USB ............................................................................................................................................................40
7.1. Photo Menu ................................................................................................................................................41
7.2. Music menu ...............................................................................................................................................42
7.3. Movie menu .............................................................................................................................................. 43
7.4. Text Menu ...................................................................................................................................................44
8. Troubleshooting ....................................................................................................................................... 45
9. Technical specifications .........................................................................................................................48
9.1. Information sheet .................................................................................................................................... 49
2 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Important safety instructions
1. Important safety instructions
To be able to use this product properly, read this user's manual carefully and keep it
for future reference. If you plan to give (sell) this device to athird person, include all
documentation, including this manual, with the transaction.
The lightning symbol inside
a triangle indicates the
device has dangerous
voltage that may cause
electric shock.
The exclamation point
symbol inside an isosceles
triangle indicates important
operation and repair
instructions in the included
device documentation.
ATTENTION
RISK OF ELECTRIC SHOCK – DO
NOT OPEN!
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER (OR BACK
SIDE). THE INSIDE OF THE DEVICE DOES NOT
CONTAIN PARTS THAT CAN BE REPAIRED BY
THE USER. REFER TO AUTHORIZED REPAIR
SHOPS FOR REPAIR WORK.
General safety instructions
• Please read this manual carefully before using the device. Follow this manual and
the instructions inside.
• Heed all warnings.
• Follow all instructions.
• Use only the attachments and accessories specified by the manufacturer.
• OPEN FLAMES, FOR EXAMPLE ABURNING CANDLE, SHALL NOT BE PLACED
ON THE DEVICE. DO NOT PLACE HOT OBJECTS OR OBJECTS WITH AN OPEN
FIRE ON THE DEVICE, FOR EXAMPLE CANDLES OR NIGHT LAMPS. HIGH
TEMPERATURES MAY MELT PLASTIC COMPONENTS AND CAUSE FIRE.
• Use the device in temperate climate.
• The manufacturer and vendor of the device are in not in any way liable for any direct
or indirect damages caused by not following the instructions for installation, setup,
operation, maintenance and cleaning of the device mentioned in this manual.
• Protect the device against impacts, falls, blows, shocks, vibration, moisture and dust.
• Prior to granting children consent to use the device, they shall become familiar with
the proper and safe use of the player, corresponding to their age. If the device has
aheadphone jack, do not use headphones set to maximum volume. Risk of hearing
damage or loss.
Installation, control
• Install the device according to the instructions in the manual.
• Leave free space around the device, it is necessary for proper air circulation. It helps
to dissipate the heat generated by the operation of the device. By covering the air
vents of the cabinet, you risk overheating and damage of the device. You must
ensure that the air circulation will not be prevented by covering the air vents with
e.g.newspaper, tablecloth, curtain, etc. Follow the installation instructions in the
manual.
EN 3
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Important safety instructions
• This device shall not be kept in aclosed area, such as alibrary or shelf, provided
sufficient ventilation cannot be provided or the manufacturer's instructions cannot be
followed.
• Do not place any objects into the air vents or any other holes. Risk of touching
components with dangerous voltage or shorting parts that could cause fire or electric
shock. Do not pour any liquids into the device. Do not install the device in direct
sunlight, or close to heat sources, like radiators, heat exchangers, stoves or other
appliances (including amplifiers) producing heat. High temperatures shorten the life of
the electronic components of the device significantly. Do not use and do not leave the
device near an open fire.
• The device must not be exposed to dripping or running water and you must not place
upon it objects filled with liquid, e.g. vases. Protect the device against becoming wet,
sprayed on or poured on by any liquid, do not leave or install the device outdoors. Do
not use the device outdoors. You risk electric shock or fire by not adhering to these
instructions.
• Do not use the device close to water.
• Handle the glass panels and cover of the device with care. The glass screen can
break on impact and cause serious injury.
• Make sure the power cord is not stepped on or compressed, especially near the plug
and point leading from the device or adapter. The power plug (adapter) is used to
disconnect the system and must be easy to access.
• Do not use adevice with adamaged power cord or plug. If the power cord or plug is
damaged, turn off the device, disconnect it from the power supply and contact your
authorized repair shop. Only aprofessional can replace adamaged power cord or
plug. Under no circumstances should you attempt to replace the power cord or plug
yourself.
• Do not attempt to bypass the safety function of the polarized plug. If the plug cannot
be plugged into your socket, refer to an electrician to replace your obsolete socket.
Before plugging the device into the socket make sure the voltage in your socket
corresponds with the voltage on the label of the device or power adapter. If you are
not sure of the type of power source you have in your home, refer to your vendor or
local power company.
• Before switching, make sure that all network connections are made properly and in
accordance with the manufacturer's instructions. Switch the device off and unplug it
from the socket before plugging in or changing the connection of the device.
• Remember to always unplug the plug (adapter) from the socket before unplugging
the power cord.
• Plug the power cord into an independent socket. Do not overload wall sockets using
extension cords or unified sockets. Risk of electric shock.
• Hold the power cord by the plug and not by the cable when pulling out from the
socket.
4 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Important safety instructions
• Disconnect the power cord from the power outlet during thunderstorms, or when not
in use for alonger period of time. Avoid carrying the device from acool environment
into awarm environment or vice versa, or operating the device in amoist
environment. Air moisture may condense in some areas within the device case and
may cause the device to become temporarily inoperable.
• In this case, leave the device in awarm and well-ventilated area and leave for
1–2hours until the moisture evaporates. The device can be normally used again.
Be especially cautious when using the device for the first time during acool season
immediately after purchasing. Do not place the device on an unstable cart, stand,
console or table. The device can fall and cause serious injury to children or adults or
seriously damage the device and other objects. Only carts, stands or tables defined
by the manufacturer or sold with the device shall be used. Any assembly work with
the device shall be carried out according to the manufacturer's instructions and shall
use assembly accessories recommended by the manufacturer.
• Do not lean against the device, do not lean over or use the device as astep. Avoid
quick movements. Make sure children do not play with the machine.
• Be careful when moving the device when placed on acart. Suddenly
stopping, using excessive force and uneven surfaces may cause the cart
holding the device to tip over.
• Under no circumstances are the manufacturer or vendor liable for any
direct or indirect damage caused by the failure to observe the instructions for
installation, configuration, operation, treatment and cleaning of this device included
within this manual.
• Protect the device against impacts, falls, blows, shocks, vibration, moisture and dust.
Do not expose the device to extreme temperatures or humidity.
Note:
If the device is powered by an adapter, only use the AC adapter and power cord
included with the device. Do not use defective sockets. Make sure the cord is properly
plugged into the socket. If the cord is loose, an electric arc can cause fire. Refer to
aqualified electrician to replace sockets.
Note:
Plug the device into aproperly grounded sockets with protective grounding pin only.
Note:
If you plan to mount the device to awall or ceiling, follow the instructions of the
manufacturer and the user's manual for the given system.
EN 5
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Important safety instructions
Repairs and maintenance
• To avoid risks of electric shock or fire, do not remove the device from the case – the
case does not contain components that the user could repair or adjust without the
necessary equipment and qualification. Refer to aprofessional service centre if your
device requires service.
• In the event of any unusual occurrences during the use of the device, e.g. smelling
the characteristic smell of burning insulation or even seeing asmoke, turn the device
off immediately, disconnect the power supply and wait with continuing use of the
device until you learn the result of its inspection by the service personnel.
• Leave all service to qualified service personnel. Service is necessary when the device
is damaged in any way, for example in case of damage to the power cord, spilling
liquid on the device, intrusion of foreign objects into the device, when the device is
exposed to rain or moisture, if the device does not function in the usual manner or if
it fell.
• When repairing or replacing acomponent of the device, make sure the repair
technician used spare parts defined by the manufacturer to ensure the replaced
components have the same features as the original. Unauthorized replacements can
cause fire, electric shock or other risks.
• Prior to cleaning, moving or other maintenance work, unplug the cord (adapter) from
the socket.
• Clean the device with adry cloth only. Do not use gasoline, thinner or other solvents
or abrasives, scouring pads, or sponges with scouring pads to clean the device.
Note:
Do not throw the device into your common household waste. Respect laws and
regulations when disposing of the machine.
Remote controller and battery
• Do not expose the remote controller or battery to direct sunlight, or close to heat
sources, like radiators, heat exchangers, stoves or other appliances (including
amplifiers) producing heat. Do not use and do not leave the device near an open fire.
Make sure the sensor is not exposed to intense light (e.g. sunlight) or fluorescent tube
light, which could lower the efficiency and reliability of the remote controller.
• The remote controller or battery must not be exposed to dripping or running water
and objects filled with liquid, e.g. vases, shall not be placed on the device. Protect the
remote controller against becoming wet, sprayed or poured on by any liquid. Do not
use outdoors. Failure to respect these instructions can lead to the remote controller or
battery becoming damaged.
• Do not use the device close to water.
• The impact the battery disposal has on the environment shall be monitored carefully.
• Using the batteries incorrectly can result in leakage and corrosion. Follow the
following instructions to ensure proper remote control operation:
– Do not insert the batteries in the wrong direction.
– Do not charge, heat, open or short the batteries.
6 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Important safety instructions
– Do not throw batteries into afire.
– Do not leave dead batteries in the remote controller.
– Do not combine various types of batteries or old and new batteries.
– If you do not use the remote controller for alonger period of time, remove the
batteries to prevent damaging the remote controller by the batteries leaking out.
– If the remote controller does not work correctly or its range decreases, replace all
batteries with new ones.
– If there is an electrolyte leakage from the batteries, have the remote control
serviced by an authorized technician.
WARNING:
To prevent risk of fire or electric shock, do not expose the device to rain or
moisture.
WARNING:
The batteries must not be exposed to excessive heat, for example sunlight, fire,
etc.
This symbol indicates the device has double insulation between dangerous
voltage from the network and user-accessible parts. Replace parts with identical
spare parts only.
• Do not leave astatic image on the LCD panel for
more than 2 hours. This may result in adamaged
panel.
• LCD screens are made using precision technology
to provide even the finest image details. Several
defective pixels can appear on the screen from
time to time, indicated as red, blue, green or black
dots (up to 0.001% of the total pixel count of the screen). This does not affect the
characteristics and the effectiveness of your TV set.
EN 7
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Important safety instructions
Notes on the USB connector:
• USB memory devices require being connected directly into the device. To prevent
afailing or interrupting data transfer, do not use USB extension cable. Electrostatic
discharge can cause the device to not function. In this case, the user must restart the
device.
• Before using aUSB memory device, test that it communicates with the device and
its read and write speed.
• For maximum reading speed, we recommend to keep the disc space defragmented.
Use file system FAT32, single partition, no protection.
• If the reading/writing of the memory device is not smooth, it can lead to undesirable
effects, such as interruption of the image (blocky image) or failure of whole frames,
audio malfunctions, and in extreme cases, stopping of the operation. Unexpected
behaviour of the connected storage device, or the presence of viruses and other
malicious software can cause the device to stop the functioning with the need to
restart it.
• The USB connector is astandard type and cannot power aUSB device with ahigh
power consumption (e.g. hard drives). Use adevice with its own power and power
them with their own power supply.
• The device was designed with respect to maximum compatibility with memory
devices. Considering the variety of devices on the market, we cannot guarantee
compatibility with every USB device available. Should you run into any issues, try
formatting the memory device directly in the device. Should problems persist, use
another memory device.
Due to wide range of the USB devices on the market, it is not possible to ensure
compatibility of the device with all types of USB devices.
Serial number
The device's serial number is aunique number that unambiguously identifies your device.
Mark down the serial number of your device below along with additional information
important for the unambiguous identification of your device.
Serial number: ____________________________________________________
Date of purchase: __________________________________________________
Notes:
1. The graphics in this manual is informative.
2. The menu on your TV screen may be slightly different from the illustrations in this
manual.
3. The information in the document are subject to change without notice. The
manufacturer accepts no liability for damages incurred directly or indirectly from
errors, incompleteness or discrepancies between the instruction manual and the
product described.
8 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Assembling the stand
2. Assembling the stand
Before attaching /removing the stand, make sure the TV is turned off and plug is
disconnected from the wall outlet.
Before performing the work, put underneath the LED TV set some soft material
(e.g.blanket). This will prevent damage to it. Ensure aproper attachment of the supports
so that the TV set is stable.
Place the assembled TV set on afirm and flat surface.
Instruction for assembling the stand
EN 9
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Device
3. Device
3.1. Button functions of the control panel
SLE 42F16TCS
This model support one button control. Short press the button in the pop-up menu (menu
will be closed after button is not operated for 5 second). In menu you can choose one of 7
options. To select requested command longly press button on it.
SLE 43F16TCS
VOL+: Volume up.
VOL-: Volume down.
CH+: TV channel up.
CH-: TV channel down.
MENU: Press to select the main menu.
SOURCE: Select the input signal.
POWER: Turn the TV on or off.
3.2. Connecting the TV connectors
SLE 42F16TCS
1 2 3 5 6 74 8 9
10
11
1. SCART input terminal
2. COAXIAL output terminal
3. LNB IN
4. RF(C/T2) IN
5. HDMI 1 input terminal
6. HDMI 2 input terminal
7. USB input terminal
8. Mini-AV input terminal
9. Mini-YPbPr input terminal
10. CI slot
11. EARPHONE output terminal
10 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Device
SLE 43F16TCS
1 3 4 5 6 72 8 9 10 11 12
1. SCART: SCART input
2. RF(C/T2) IN: connection to the antenna or to the cable television system
3. LNB IN
4. HDMI 1 ACR, CEC: connection of a device with HDMI output
5. HDMI 2 CEC: connection of a device with HDMI output
6. HDMI 3 CEC: connection of a device with HDMI output
7. COAXIAL: coaxial audio output
8. Mini-AV: AV input
9. Mini-YPbPr: YpbPr input
10. CI: input CI
11. USB: connection of a USB flash drive for playback of supported multi media content
12. EARPHONE: earphone output
EN 11
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Remote control
4. Remote control
1 2
6
5
9
12
15
18
20
25
28
31
34
3
4
7
8
10
11
13
14
16
22
21
17
19
23
24
26
27
29
30
32
33
1. : Press this button to Turn the TV on
or off.
2. : Press this button to mute or restore
sound.
3. NICAM/A2: In the TV condition, press
this key to select the stereo mode.
4. ASPECT: Press to adjust picture ratio.
5. PMODE: Select picture mode.
6. SMODE: Select sound mode.
7. 0–9: Select and switch to a channel
using 0–9.
8. --/-: Switch the program digit.
9. : Switch back and front between the
current and previous channels.
10. DISPLAY: Display TV information.
11. FREEZE: Press to hold the picture.
12. : Start to record.
(The U disk will be formatted when in
burning , please do not store important
files in the U disk.)
AUTO: Adjust the picture automatically
in pc mode (not supported in case of all
models).
13. RED, GREEN, YELLOW, BLUE:
Correspond to the different colored
subjects.
14. SLEEP: Set the sleep timer.
15. SOURCE: Press to change signal source.
16. ENTER: Enter the selected option or
execute the selected operation.
NOTE: Press this button to display
“channel list” in TV source.
17. MENU: Press this button to enter
the main menu for various optional
adjustable setting.
18. EXIT: Exit the OSD (On-screen display).
19. VOLV/VOLv: Adjust the volume.
20. CHV/CHv: Change the channel up and
down.
21. SUBTITLE: Open or close subtitle (used
for models with DTV function only).
22. T.SHIFT: Press the button to pause
current DTV program and start record
background (used for models with DTV
function only).
12 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Remote control
23. HOLD: Freeze a multi-page passage on screen in Teletext mode (used for European region
only).
u: Press to start playing the MEDIA, or to pause playing (used for models with MEDIA
function only).
24. REVEAL: Press this button to reveal the hidden information in Teletext page. Press again
to hide the information.
m: Press to play backward (used for models with MEDIA function only).
25. SIZE: Display the top, bottom or all of page to read easily in Teletext mode.
M: Press to play forward (used for models with MEDIA function only).
26. INDEX: Press this button to go to the index page in Teletext.
x: Stop playing the Media (used for models with MEDIA function only).
27. .: Skip to previous chapter (used for models with MEDIA function only).
28. S.PAGE: Carry out the function of SUBCODE in the text while enter the text display mode.
>: Skip to next chapter (used for models with MEDIA function only).
29. TEXT: Press to enter the Teletext mode.
30. FAV: Switch between customer set “Favorite List”.
31. AUDIO: Press to select the DTV audio (used for models with DTV function only).
32. PVR: PVR button. It is used to enter/exit the PVR setting menu.
33. EPG: Enter electronic program guide (used for models with DTV function only).
34. TV/RADIO: Switch between TV and RADIO (used for models with DTV function only).
Note:
Remove batter during storage or when you are not using the device for a long time.
To control the device using the remote control, point the remote control at the
device and then press the button with the required function. The maximum range
of the remote control is about 5 meters with a deviation of up to +/- 30° from the
perpendicular direction to the reception sensor of the remote control on the front side
of the device. The falling capacity of the batteries gradually reduces the remote control
range. There must be no solid obstacles in the area between the remote control and
the device when the remote control is being used. During standard use the lifetime of
batteries in the remote control is about 1 year. When the effective range of the remote
control is substantially reduced, or when there are problems with its use, change both
the batteries in the remote control. If you are not using the remote control for a longer
period of time, take out both batteries from it – in this way you will prevent potential
damage caused by their leakage.
Avoid strong impact of light (e.g. sunlight or light from strong fluorescent/saving
sources) which can reduce the effectiveness and reliability of IR remote control.
EN 13
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Turn on first time
5. Turn on first time
Press SOURCE to display the list of input sources.
Press V/v or SOURCE to select the required input source.
Press OK to switch to the appropriate input source.
Press EXIT to exit menu.
To watch television connect the antenna cable with functional reception (antenna,
common antenna, cable...) to TV input marked as “RF-ln”.
5.1. Language selection
Using buttons b/B select the language used in menus and news.
5.2. Country selection
Using buttons V/v select the country menu.
Using buttons b/B select the required country.
14 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Turn on first time
5.3. Automatic tuning
Select between the Analogue (ATV) or digital (DTV) reception or keep both receptions
ATV+DTV. First will be processed the tuning of the analogue television channels (ATV). If
you want to skip the ATV tuning, press the Menu button and the button with left arrow.
Afterwards, the tuning of the digital television channels will be done (DTV). If you want to
skip the DTV tuning, press the Menu button and the button with left arrow.
EN 15
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Turn on first time
Note:
When the automatic tuning does not find any receivable channel (e.g. due to poor
antenna) or you interrupted the tuning manually, you can still tune channels manually,
one by one, in the device menu described below. For this you will need some
technical information about the broadcast that you want to receive, e.g. the method of
transmission, of the channels frequency, sound modes, the transmission speed etc.
A successful completion of the automatic tuning results in saving of the list of the
available TV programs and radio stations, which you can receive immediately. In the case
of multiple occurrences of the same or similar programs (e.g. due to local variations of the
same central program or aremote reception with interference or local reception “clean”
reception) verify, which station works best for you or modify the list.
Automatic satellite tuning is adapted to tune one satellite antenna with asingle LNB and
corresponds to the setting DiSEqC = None / None. If your antenna is complicated, specify
the antenna parameters (especially control LNB DiSEqC commands) by setting that the
installer of your antenna system tells you. Enter these data in the Satellite setting/Dish
Setup, described in the next section.
16 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Menu
6. Menu
6.1. Channel Menu – satellite
WARNING:
We strongly recommend that the antenna system is installed by an expert.
Agood quality installation will reward you with astable and trouble-free
reception.
Press MENU to display the main menu.
Use the buttons b/B to select the item CHANNEL in the main menu.
1. Using the buttons V/v select the item, which you want to modify in the menu
CHANNEL.
2. Press OK and perform the modification.
3. When you finish the modification, press MENU, save the changes and return to the
previous menu.
Acting on the information from your installer of the antenna system, specify all
parameters for each of the satellites for which your system is ready and which you intend
to receive. If aparameter is wrong or your antenna system will not accept any values
Auto or None / None, it will not be possible to receive the satellite or under the name of
aparticular satellite will be accepted another satellite.
When setting asatellite follow the description of the buttons for individual functions on
the screen.
Select asatellite from the list, use the Right arrow to move in the parameter settings
and set them correctly. Return to the list using the button EXIT. When the parameters
are properly set and if it is active the first of the transponders on the list of the given
satellite (still hidden) broadcasts the horizontal indicator Quality (bottom of the window)
changes from empty to anonzero value, e.g. it will be in the middle of the range. If you
want to display the list of transponders of agiven satellite, press the button EPG. Each
EN 17
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Menu
transponder is mainly characterized by afrequency (and also by H/V polarization and
symbol rate, e.g. 27500 kSym/s) and carries several TV programs and if you want to
receive them, when selected, the indicator Quality must again show non-zero value, e.g.
the middle of the range.
6.1.1. Fast scan M7 FastScan
• Set correctly the DiSEqC switches for the Astra 23.5° east satellite.
• Set the scanning mode to Fast Scan
• Press OK and wait until the scanning is finished.
Note on FastScan:
FastScan finds the appropriate operator channel table and saves it in the device list.
The list taken by FastScan function, the position and the numbers of the individual
channels are determined by the broadcast operator and the user can not change
them. The list is stored in the device regardless of the current reception options,
antenna settings, subscriptions etc. The user is guaranteed to have in the device all the
channels the operator is transmitting.
18 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Menu
Note about updating the FastScan and consumption list:
The device will check the channel list of the operator FastScan for up to date channel
list availability when switched into Standby mode. To do this, simply switch off the TV
at the selected Satellite input. The device will not stop to power the satellite antenna
during the update, the status LED may flash several times. Only after completion of the
update (about 3 minutes) will its consumption fall below the prescribed value of0.5W.
6.1.2. Advanced/Special tuning
You can perform advanced and special tuning in the Dish Setup of the satellite.
You can scan one or more satellites, one or more transponders by selection from their
list using the button OK. After selection press blue button and select from the following
window three selections:
1. Scanning mode between Default (is searched according to the list on TV), Blind scan
(the slowest, searches many modes and parameters of broadcasting regardless if any
broadcasting exists there), Network (first is scanned for the network table NIT and
then are scanned the transponders found there).
2. Channel type select – Free/FTA, for which reception is not necessary any card of
conditional access (CA) and Scrambled (sometimes called “coded”), where you need
an access card. The scrambled channels are displayed in the list by asymbol of
akey.
3. Service type – select DTV and Radio.
Example of advanced tuning process Skylink:
• Set correctly according to your antenna system the satellites‘ reception Astra 23,5°
east (Astra 1E, 1G, 3A).
(Or check the presence and setting of individual transponders according to the list of
the operator.)
• Select (check by pressing OK) in the list of this satellite the transponder 12070 MHz,
horizontal polarization, symbol rate 27500 kSym/s.
• After you press Scan select Network tuning. The television will first find the NIT table
on TP12070 and then tunes in the programs, which are not listed there.
(If you receive also the satellite Astra 19,2° east, tune programs from several
transponders of this satellite, if you paid for these programs and want to receive
them.)
• You can delete from the extensive list of programs those, which you do not require,
e.g. because they belong to another operator, whose access card you do not own.
EN 19
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Menu
6.2. Channel menu – ATV/DTV
Press MENU to display the main menu.
Use the buttons b/B to select the item CHANNEL in the main menu.
1. Using the buttons V/v select the item, which you want to modify in the menu
CHANNEL.
2. Press OK and perform the modification.
3. When you finish the modification, press MENU, save the changes and return to the
previous menu.
6.2.1. Automatic tuning
Using the buttons V/v select the item Auto Tuning and enter it by pressing OK. The
same action will happen like in the first tuning, all the previously tuned channels will be
deleted.
6.2.2. Manual ATV tuning
Current CH (Current channel)
Setting the channel number.
20 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Menu
Color System
Select the color system.
Sound System
Select the sound system.
Fine-Tune
Fine tuning of channel frequency.
Search
Start channel search.
6.2.3. Manual DTV tuning
Using the buttons V/v select the item DTV Manual Tuning and press OK to enter the
submenu.
Using the buttons b/B select the channel and press OK to perform program search.
6.2.4. Program edit
Using the buttons V/v select the item Program Edit and press OK to enter the submenu.
Use the three color buttons zz zto program achannel.
First, press the buttons V/v to mark the channel, which you want to select. Then:
Use the red button to remove the program from the list.
Use the yellow button to move the program.
EN 21
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Menu
Use the blue button to skip the channel (the television will automatically skip the channel
when you will use the buttons PR+/- for switching channels).
Press FAV to add or remove the channel from the list of the Favourite channels.
The position and numbers of each channel captured by FastScan are determined by the
broadcast operator and the user can not change them. The color buttons are inoperative.
6.2.5. Schedule list
You can program in the digital broadcast system certain time dependent actions, which
are called Events. These events scheduled by you (programmed) are saved in the list.
Using the buttons V/v select the item Schedule List and press OK to enter the submenu.
It is available with some sources.
Enter the following interface using the yellow button.
If there is aconflict in the set time awarning appears.
Note:
Scheduled tasks require precise time setting, otherwise their execution may be
inaccurate or unreliable. Use accurate time from broadcast to schedule tasks, set
correct time zone, daylight saving time, and perform tasks when the TV is on.
22 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Menu
Note:
If your Conditional Access System (CAM) supports URI protection, you need to enter
the PIN (CI CAM PIN) of your CA system for the first time. This is different from the TV
lock password, it is assigned by the CAM operator.
6.2.6. Signal information
Use the buttons V/v to select the item Signal Information. Press OK to display detailed
information about the signal, its strength and quality (interference level). Available only for
the DTV signal. For satisfactory reception use only programs/channels with the highest
values of both variables, max. is 100.
6.3. Picture Menu
Press MENU to display the main menu.
Use the buttons b/B to select the item PICTURE in the main menu.
1. Using the buttons V/v select the item, which you want to set in the menu PICTURE.
2. Press OK and set.
EN 23
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Menu
3. After you finish the setting, save it by pressing the button MENU and return to the
previous menu.
6.3.1. Picture mode
Using the buttons V/v select the item Picture Mode and press OK to enter the submenu.
If the picture is in the Personal mode, you can change the values of contrast, brightness,
colors, sharpness and tint.
Tip:
For direct picture mode change you can use the button P.M.
Contrast / Brightness / Color / Tint / Sharpness
Using the buttons V/v select the item and then perform the modification using the
buttons.
Contrast: The level of intensity of the light places in the picture. The dark places remain
unchanged.
Brightness: Setting the overall brightness of the picture. It will affect the dark places in the
picture.
Colour: Setting the color saturation according to your preferences.
Tint: Used for color compensation, only for NTSC.
Sharpness: Setting the highlighting of picture details.
Note:
The items are available only for Personal picture setting.
24 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Menu
6.3.2. Color temperature
Change of the overall color presentation.
Using the buttons V/v select the item Color Temperature and then press OK to enter the
submenu.
Using the buttons b/B select the mode (available picture modes: Cold, Normal, Warm).
Cold Emphasizes blue tint of the white color.
Normal Keeps the white color neutral.
Warm Emphasizes reddish tint of the white color
6.3.3. Noise reduction
Used to filter and suppress noise in an image and improve image quality.
Using the buttons V/v select the item Noise Reduction and them press OK to enter the
submenu.
Off: Noise detection in the picture is off.
Low: Detection and reduction of alow picture noise.
Middle: Detection and reduction of amedium strong picture noise.
High: Detection and reduction of astrong picture noise.
Default: Set as default.
EN 25
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Menu
6.3.4. HDMI mode
Select for the currently connected source in the HDMI input either Video (e.g. satellite
receiver) or PC (computer) or AUTO. This way you will adjust the picture processing and
its size to the current source. When asource is not connected the HDMI is not active.
6.4. Sound menu
Press MENU to display the main menu.
Press b/B to select in the main menu the item SOUND.
1. Using the buttons V/v select the item, which you want to set in the menu SOUND.
2. Press OK and set.
3. After you finish the setting, save it by pressing the button MENU and return to the
previous menu.
6.4.1. Sound mode
Use the buttons V/v to select the item Sound Mode and press OK to enter the submenu.
Use the buttons V/v to make selection.
If the sound is in Personal mode(Personal), you can change the treble and bass values.
26 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Menu
Tip:
To change the sound mode directly, use the button S.M. on the remote controller.
Standard: Provides balanced sound in all environments.
Music: Maintains the original sound. Suitable for music programs.
Movie: Emphasizes the treble and bass for an enhanced audio experience.
Sports: Emphasizes voice in sports programs.
Personal: It allows you to customize the sound settings.
Note:
Bass and treble are available only in the Personal mode, where you can set it as
necessary.
6.4.2. Balance
Use the buttons V/v to select the item Balance. Use the buttons b/B to perform the
adjustment.
6.4.3. Automatic volume levelling
Use the buttons V/v to select the item Auto Volume Level and then use the buttons b/B
to select the option On or Off.
6.4.4. Digital output
Use the buttons V/v to select the item SPDIF Mode and then use the buttons b/B to
select the option Off, PCM or Auto. Designed to process the external digital sound.
6.4.5. Switching the sound description
Use the buttons V/v to select the item AD Switch and then use the buttons b/B
to select the option On or Off. Function for the visually impaired, at which an active
audio track describes the current picture. It requires the support of the encoded data
stream. When you turn the function on, it adds to the original sound of the program
acommentary with apreset volume, with which are some programs equipped by the
broadcaster.
Note:
Balance: this item allows to set the speaker output and to optimize listening from the
place where you are.
Auto Volume Level: This item is used to automatically reduce the differences between
the volumes of channels and programs.
EN 27
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Menu
6.5. Time menu
Press MENU to display the main menu.
Use the buttons b/B to select the item TIME in the main menu.
1. Using the buttons V/v select the item, which you want to set in the menu TIME.
2. Press OK and set.
3. After you finish the setting, save it by pressing the button OK and return to the
previous menu.
6.5.1. Time zone
Use the buttons V/v to select the item Time Zone and press OK to enter the submenu.
Use the buttons V/v/b/B to select the time zone.
Note:
Correct time setting (incl. the switching to summer time) is needed for many functions
of digital broadcasting, e.g. EPG. The accurate time is present in the broadcasting and
the device synchronizes with it. It is necessary only for the user to set the correct time
zone.
28 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Menu
6.5.2. Sleep Timer
Use the buttons V/v to select the item Sleep Timer and press OK to enter the submenu.
Use the buttons V/v to select (available options: Off, 15 min, 30 min, 45 min, 60 min,
90 min, 120 min, 240 min).
6.5.3. Automatic standby mode
Use the buttons V/v to select the item Auto Standby and press OK to enter the
submenu.
Use the buttons V/v to make selection.
Tip:
If you do not use the remote control during the set time, the TV automatically switches
to standby mode. If you use the controller, the timer resets. The length of time suffices for
most users. You can deactivate the shutoff function entirely by selecting OFF.
EN 29
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Menu
6.5.4. Menu display timer
Use the buttons V/v to select the item OSD Timer and press OK to enter the submenu.
Use the buttons V/v to select how long should be displayed the setting options on the
screen before they disappear.
6.6. Lock menu
Press MENU to display the main menu.
Use the buttons b/B to select in the main menu the item Lock. You have to enter avalid
password.
1. Using the buttons V/v select the item, which you want to set in the menu LOCK.
2. Press b/B and enter the setting.
3. After you complete the setting, save it by pressing MENU and return to the previous
menu.
The default factory password is 0000, and if you forget what you have set, contact
aservice centre.
30 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Menu
6.6.1. Lock system
Use the buttons V/v to select the item Lock System, press OK and select one of the
following three options.
6.6.2. Setting the password
Use the buttons V/v to select the item Set Password and then press OK to enter the
submenu and enter the new password.
EN 31
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Menu
6.6.3. Channel Lock
Use the buttons V/v to select the item Channel Lock and then press OK to enter the
submenu and select.
Use the green button to lock or unlock the channel. You have to enter the apassword to
watch it.
6.6.4. Parental Guidance
Use the buttons V/v to select the item Parental Guidance and then press OK to enter the
submenu where you select the age suitable for your children.
The broadcaster can provide information about aprogram about arecommended or
minimum age for watching it. If aprogram is broadcast with hidden mark of minimum
age, the device then compares it with what you entered, and possibly prompts for
apassword, so that you can watch the program for higher age.
6.6.5. Key Lock
Use the buttons V/v to select the item Key Lock and then use the buttons b/B to select
the option Off or On.
If the key lock is active, you can not use the buttons on the control panel of the TV.
32 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Menu
6.6.6. Hotel mode
Hotel Mode is used to restrict certain TV functions, to make it easy to operate in places
where should be e.g. limited maximum volume or to prevent tuning TV.
1. Use the buttons V/v on the remote control to select the hotel mode in the menu
Lock.
2. Press OK on the remote controller to enter the submenu.
3. After you finish the setting, save it by pressing the button MENU and return to the
previous menu.
6.7. Hotel mode
Using the buttons V/v select the item Hotel Mode and then use the buttons b/B to
select the option On or Off.
6.7.1. Source Lock
Use the buttons V/v to select the item Source Lock and then press OK to enter the
submenu and to select.
6.7.2. Default Source
Use the buttons V/v to select the item Default Source and then press OK to enter the
submenu and to select.
6.7.3. Default Program
Use the buttons V/v to select the item Default Prog and then use the buttons b/B to
select.
6.7.4. Maximum Volume
Use the buttons V/v to select the item Max Volume and then use the buttons b/B to
select.
EN 33
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Menu
6.7.5. Clear Lock
Use the buttons V/v to select the item Clear Lock and then press OK to delete the
previous settings.
6.8. Setup menu
Press MENU to display the main menu.
Use the buttons b/B to select the item SETUP in the main menu.
1. Using the buttons V/v select the item, which you want to set in the menu SETUP.
2. Press b/B and enter the setting.
3. After you finish the setting, save it by pressing the button MENU and return to the
previous menu.
6.8.1. Menu language on the screen
Select the displayed language of the menu on the screen. English is the selected default
menu language.
Use the buttons V/v/b/B to select the menu language.
34 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Menu
6.8.2. TT Language
Use the buttons V/v to select the item TT Language and then press OK to enter the
submenu.
Use the buttons V/v/b/B to select the teletext language if the national alphabet is not
correctly displayed.
6.8.3. Audio Language
Press V/v to select the item Audio Languages and then press OK to enter the submenu.
Automatically selects aspecific language if it is present in the broadcast. You can use two
languages in order of primary and secondary. If there is no language selected by you, the
language of the broadcaster will be selected.
Use the buttons b/B to select the primary/secondary language.
Use the buttons V/v/b/B to select the audio languages.
6.8.4. Subtitle Language
Press V/v to select the item Subtitle Language and then press OK to enter the submenu.
Automatically selects aspecific language if it is present in the broadcast. You can use two
languages in order of primary and secondary. If there is no language selected by you, the
language of the broadcaster will be used.
EN 35
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Menu
Use the buttons b/B to select the primary/secondary language of the subtitles.
Use the buttons V/v/b/B to select the subtitle language.
6.8.5. Hearing Impaired, Impaired listening
Use the buttons V/v to select the item Hearing Impaired and then press OK to select the
option On or Off. Depends on the program broadcasting.
6.8.6. PVR File System
It is an option to set recording (PVR) of digital broadcasts on your USB storage device.
Due to the size of data of the incoming digital broadcasting the setting is more detailed.
Use the buttons V/v to select the item REC File System and then press OK to enter the
submenu.
Use the buttons V/v to select the item Check REC File System and then enter the
settings by pressing OK. The speed of the USB device will be checked. The result
determines what best broadcast is your USB device capable of holding. When the result
is unsatisfactory, format the TV, which will attempt to adapt the USB device better to the
digital broadcast recording. Due to the limit of the file size and recording choose lower
values. Higher values rapidly increase the demands on your memory device, both on size
and especially the speed.
WARNING:
Formatting permanently erases all contents of the memory device!
36 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Menu
Note:
First try each USB device for speed and the reliability of recording.
When the result is unsatisfactory, replace it with another one, mainly faster. The speed
of the USB memory is the basic parameter of the reliability of the recording and also
of the time shift.
Note on recording and copyright protection:
PVR and time shift recordings can place higher demands on the speed of the
connected memory and verification of the copyrights to the encrypted broadcast.
Changing the mode (e.g. start and end) or some operations may wait for these external
stimuli and response to the user's instructions may slow down. If the broadcast rights
only allow watching and not arecording, the device will notify you. The recording on
your storage device is encrypted for protection of copyright against use on another
device.
6.8.7. Aspect ratio
Use the buttons V/v to select the item Aspect Ratio and then press OK to enter the
submenu.
Use the buttons V/v to select the aspect ratio (available options: Auto, 4:3, 16:9, Zoom1,
Zoom2).
6.8.8. Blue screen
Use the buttons V/v to select the item Blue Screen and press OK to select the option On
or Off. The function will apply if there is no useful picture signal to display.
6.8.9. First Time Installation
Use the buttons V/v to select the option First Time Installation and then press OK to
enter the settings. You erase the previous settings and tuning and go through the whole
process of putting the device into operation again.
EN 37
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Menu
6.8.10. Reset, Reset the default factory setting.
Use the buttons V/v to select the item Reset and then press OK to enter the submenu.
The function performs return of TV settings to factory defaults, except for deletion of the
list of tuned programs.
6.8.11. Software Update (USB)
Use the buttons V/v to select the item Software Update (USB), insert the USB device in
the USB slot and then press OK, to update the software.
WARNING:
Update the new TV software only in case when you have the original software
producer for the given type including the description of the changes. Any attempt
to update with non-genuine software, even with small differences may end up
causing irreversible damage to the TV, which is not covered by warranty.
6.8.12. HDMI CEC
The feature performs settings of special items of digital communication between devices
at the HDMI interface. Follow the instructions in your external HDMI CEC to set the items
and verify the correct communication.
Press V/v to select the item HDMI CEC and then press OK to enter the submenu.
CEC Control Press b/B to switch on or off the HDMI CEC function.
Audio Receiver Press b/B to switch on or off the HDMI Audio receiver function.
Auto Standby, Device Auto Power Off, TV Auto Power On.
Press b/B to turn on or off the auto standby mode for this TV set as well as for
aconnected device.
Device List, Device Menu
Press the OK button to open the main menu of the device.
38 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Menu
6.9. ATV Channel menu
Press the button MENU to display the main menu (in the ATV mode).
Use the buttons b/B to select the item CHANNEL in the main menu.
1. Using the buttons V/v select the item, which you want to set in the menu
CHANNEL.
2. Use the buttons b/B to set avalue.
3. When you finish the setting save it by pressing the button MENU and return to the
previous menu.
6.9.1. Automatic tuning
Use the buttons V/v to select the item Auto Tuning and press OK to start tuning.
6.9.2. Manual ATV tuning
Using the buttons V/v select the item ATV Manual Tuning and press OK to enter the
submenu.
6.9.3. Manual DTV tuning
Using the buttons V/v select the item DTV Manual Tuning and press OK to enter the
submenu.
6.9.4. Programme Edit
Use the button V/v to select the item Programme Edit and press OK to enter the
submenu.
Notes:
1. The menu Sound and its description are the same like in the DTV mode (however
the item AD switch is not available).
2. The menu Lock and its description are the same like in the DTV mode.
3. In the menu TIME the items to set time and the time zone selection are not
available.
4. In the menu Setup are not available the items Hearing impaired and PVR
recording.
EN 39
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Menu
6.10. Component Input / HDMI / AV menu
Notes:
1. The menu Picture and its description are the same like in the DTV mode.
2. The menu Sound and its description are the same like in the DTV mode (however
the item AD switch is not available).
3. The menu Lock and its description are the same like in the DTV mode.
4. The menu Channel is not available in the AV / Component input / HDMI modes.
5. In the menu Time the items to set time and the time zone selection are not
available.
6. AV does not support Hearing Impaired items and PVR recording; Component input
or HDMI do not support teletext language and Hearing Impaired items.
40 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
USB
7. USB
Note:
Before you use the Media menu, connect the USB device and then press SOURCE
and set the input source to Media. The TV set detects the majority of the USB devices
and shortly offers you to switch to playback. When you will not respond, the offer
disappears and the TV remains in the original mode.
Use the buttons V/v to select the item Media in the menu Source and press Enter to
enter the settings.
Use the buttons b/B to select in the main menu the item Media, which you want to
set and press Enter to enter the settings.
EN 41
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
USB
7.1. Photo Menu
Use the buttons b/B to select in the main menu the item PHOTO and then enter the
interface by pressing OK.
Press Exit to return to the previous menu and to exit menu.
Press b/B to select in the file menu the file, which you want to view and press the OK
button to display the picture. If you want to view only this image, press the button Pause,
otherwise the slideshow of all the photos in the directory starts, beginning with the tagged
picture. Press the down arrow to hide the information bar with slideshow controls. To
resume the paused slideshow, press Play/Pause. Stop the slideshow by pressing EXIT,
you will return to the directory list.
When you pause on an image in the directory list, after awhile, the file information
appears on the right, and apreview of the image is displayed in the middle.
Basic functions:
Repeat ALL
Use the buttons b/B to select the repeat mode, press OK and select Repeat None /
Repeat all / Repeat 1.
Music
Use the buttons b/B to select the item Music, press OK and select the music
background.
Playlist
Use the buttons b/B to select the item Playlist, press OK to enter.
Info
Use the buttons b/B to select the item Information, press OK to enter. Detailed
information about the picture is displayed.
Rotate
Use the buttons b/B to select the item Rotate. You can rotate the picture as needed.
Zoom in/Zoom Out
You can select zooming in or out of the picture.
Move View
If the picture is larger than the screen, use this function to move the picture.
42 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
USB
7.2. Music menu
Use the buttons b/B to select in the main menu the item MUSIC and then enter the
interface by pressing OK.
Press Exit to return to the previous menu and to exit menu.
Use the buttons b/B to select the disk unit, which you want to play and press OK to
enter the interface. You can hide the information bar by using the arrow button down,
you can renew it by pressing OK. End playback by pressing EXIT, you will return to the
directory. When you pause in the directory on amusic file, after awhile the information
about the file is displayed on the right and aplayback starts.
Use the buttons b/B to select the item to return to the previous menu.
EN 43
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
USB
7.3. Movie menu
Use the buttons b/B to select in the main menu the item MOVIE and then enter the
interface by pressing OK.
Press Exit to return to the previous menu and to exit menu.
Use the buttons b/B to select the disk unit, which you want to play and press OK to
enter the interface. Press the media button to play the selected movie if it is acceptable
for playing, especially its codec.
Press Display to select information bar at the bottom, which you want to start and press
OK to enter it.
If there is in the movie directory also afile with external subtitles with the same name as
the movie, the device will play it (the button SUBTITLE). You can select among national
alphabets by pressing CharSet in the information bar. When you pause in the directory on
amovie file, after awhile information about the file is displayed on the right and the file
starts playing.
Press Exit to return to the previous menu and press again to exit the overall menu.
44 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
USB
7.4. Text Menu
Use the buttons b/B to select in the main menu the item TEXT and then enter the
interface by pressing OK.
Press Exit to return to the previous menu and to exit menu.
Use the buttons b/B to select the drive unit which you want to browse and press OK to
enter the interface.
Use the buttons b/B to select the item to return to the previous menu.
EN 45
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Troubleshooting
8. Troubleshooting
WARNING:
Under no circumstances should you try to repair the appliance yourself, the
device does not contain parts that could be repaired by the user. Always take the
device to an authorized service center if arepair or adjustment are necessary
other than regular maintenance. Unauthorized interference with the device
is considered abreach and the loss of warranty claim. The importer, supplier,
distributor or vendor shall not be liable for any losses caused by aviolation of
regulations listed in this manual. Do not open the device, there is the danger
of electric shock. In the case of device failure, first check the following list of
problems and their solutions. If you fail to remove the defect according to the
following tips, contact your vendor.
Problems Possible solutions
The TV set has no power. Check the attached power cord and the functioning of
the electrical outlet.
Unplug the power cord, plug it in after 60 seconds
and turn the TV set on again.
No picture. Check the antenna connection.
There could have been problems at the broadcasting
station, try another station.
Adjust contrast and brightness.
Good picture, but no sound. Raise volume.
Check that the sound is not muted (Mute function).
Press MUTE on the remote controller. Check audio
settings.
If you use an external device, make sure that
itsvolume is not muted or the sound is not switched
off.
If you use the A/V or acomponent input, make sure
that the cables are correctly connected and are not
loose. If you use acable with DVI reduction on HDMI,
you need aseparate audio cable.
Make sure that the headphones jack is not occupied.
Good sound, but an unusually
colored picture or no picture.
Check the connection and the state of the antenna.
If you use acomponent input, check the connection.
Incorrect or loose connection can cause problems
with colors or empty screen.
46 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Troubleshooting
Problems Possible solutions
The TV set does not respond to
the remote controller.
The batteries in the remote controller might be
empty.
If it is necessary, replace them with new ones.
Clean the lens of the remote controller. The distance
between the LED TV set and the remote controller
should be no more than 8 m, in the recommended
operating angle and with no obstacles in the path
of the beam. Prevent the impact of strong light
(daylight, sunlight or fluorescent light lamps and
fluorescent tubes) on the TV and remote controller.
There are color points on the
screen.
Although the LED screen is made with high-precision
technology and 99.99% or more of the pixels are
operational, the screen can display permanently
unlit or lit points of light (red, blue or green). This is
aconstruction feature of the LED screen and is not
amalfunction.
The picture falls apart. Keep the TV set away from interfering sources of
electricity, such as cars, hair-dryers, welders and any
optional equipment.
The disintegration of image may be caused by
atmospheric phenomena, such as alocal or distant
thunderstorm.
When installing optional equipment, leave aspace
between the optional equipment and the TV set.
Check the antenna and the connection.
Keep the antenna away from the power or input/
output cables.
After automatic tuning only
some channels are available.
Check if your area is covered by digital TV
broadcasting. Try to retune or manually tune the
missing channels.
Check if you use the correct antenna type.
Cannot select achannel. Check if the channel is not blocked in the main menu
settings.
Cannot play from the USB
device.
Check the connecting channel between the USB and
power connection. The hard disc was not formatted.
Make sure that the USB flash unit is compatible and
contains supported formats of multimedia data.
EN 47
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Troubleshooting
Problems Possible solutions
The picture is distorted,
contains macroblocks,
microblocks, points, large pixels,
etc.
Video compression can cause disruption, especially
during rapid movement, e.g. In sports programs and
action movies.
Speaker noise Check the cable connections, make sure that the
video cable is not connected to video input.
Sound distortion can be caused by alow level of the
signal.
The TV set turns off
automatically.
Make sure that the sleep timer or power save mode
timer are not on.
The TV set turns on
automatically.
Make sure that the timer to turn on is not on in the
settings menu (Settings).
The picture is not displayed on
the whole screen.
First make sure that the problem is not caused by the
input signal. Then try to adjust the item Zoom in the
Functions menu.
Picture defects and their causes
Snowy screen
Snowy screen is usually caused by aweak signal. Change the antenna setting or install
an antenna booster.
Double images or ghosting
Double image is usually caused by reflection from tall buildings. Adjust the antenna
orientation or place it higher.
Radio frequency interference
Waves are moving on the screen, which is usually caused by neighbouring radio
transmitters or shortwave receiver.
Interference by electrothermal devices with high temperature
Inclined or arrow shaped patterns appear on the screen or apart of the picture is missing.
This is probably caused by electrothermic devices with high temperatures in anearby
hospital.
48 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Technical specifications
9. Technical specifications
Model SLE 42F16TCS SLE 43F16TCS
Panel size 42" (107 cm) 43" (109 cm)
Power consumption 74 W 74 W
Standby consumption <0.5 W <0.5 W
Rated voltage 100 – 240 V AC, 50/60 Hz 100 – 240 V AC, 50/60 Hz
Remote controller Yes Yes
VESA wall mount 200 × 100 200 × 200
Dimensions with stand (w × h × d) 953 × 213 × 595 mm 967 × 204 × 599 mm
Dimensions without stand
(w × h × d)
953 × 86 × 539 mm 967 × 83 × 565 mm
Net weight with stand 8.5 kg 6.8 kg
Connection
RF IN 1 1
SCART 1 1
HDMI 2 (1xARC) 3 (1xARC)
SPDIF coaxial 1 1
USB 1 1
VGA 1 1
MINI AV in 1 1
MINI YPbPr 1 1
PC Audio in 1 1
Supported USB formats HEVC, MKV, AVI, MP4, MPEG, FLV,
MP3, WMA, JPEG, JPG, PNG, BMP
HEVC, MKV, AVI, MP4, MPEG, FLV,
MP3, WMA, JPEG, JPG, PNG, BMP
CI slot 1 1
Other functions
Resolution 1920 × 1080 1920 × 1080
Brightness (cd/m²) 200 cd/m² 220 cd/m²
Response time (ms) 8 8
Viewing angle 176°/176° 178°/178°
Embedded tuner DVB-T/T2, DVB-C, DVB-S2 DVB-T/T2, DVB-C, DVB-S2
Video system PAL/SECAM BG/DK/I PAL/SECAM BG/DK/I
PVR recording to USB Yes Yes
Progressive scan Yes Yes
Timeshift Yes Yes
EPG Yes Yes
Comb filter Digital Digital
OSD menu EN, CZE, POL, HUN, SVK, GER,
FRE, ITA, SPA, GRC, HRV, SRP,
BUL, SLV, LIT, RUS, ROM
EN, CZE, POL, HUN, SVK, GER,
FRE, ITA, SPA, GRC, HRV, SRP,
BUL, SLV, LIT, RUS, ROM
Zoom Yes Yes
Noise reduction Yes Yes
Timer OFF / ON / SLEEP Yes Yes
EN 49
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
Technical specifications
Subtitles Yes Yes
Audio language Yes Yes
Channel list Yes Yes
Favourites list Yes Yes
Image freeze Yes Yes
Radio Yes Yes
Lock Yes Yes
Parent lock Yes Yes
Note:
Technical specifications may change without prior notice.
The original version is in Czech.
Manufacturer address: FAST ČR, a.s, Černokostelecká 1621, 251 01 Říčany, Czech Republic
Information sheet
Importer: FAST ČR, a.s., Černokostelecká 1621, 251 01 Říčany
Brand Sencor
Model
SLE 42F16TCS SLE 43F16TCS
Energy efficiency class A+ A
Screen diagonal in cm / inches [cm/"] 107/42 109/43
Electric energy consumption when on [W] 43 70
Annual electric energy consumption* [kWh] 63 102
Electric energy consumption in standby mode [W] ≤0,5W ≤0,5W
Screen resolution [pixels] 1920 × 1080 1920 × 1080
* Electrical energy consumption 63 kWh for SLE 42F16TCS and 102 kWh for SLE
43F16TCS per year is based on the electricity consumption of a TV set operating 4
hours per day for 365 days. The actual electric energy consumtpion will depend on how
the television is used.
From 2021 base on new EU regulation.
Brand Sencor
Model
SLE 42F16TCS SLE 43F16TCS
Energy efficiency class A A
Screen diagonal in cm / inches [cm/"] 107/42 109/43
Electric energy consumption when on [kWh/1000h] 43 47
Electric energy consumption in standby mode [W] ≤0,5W ≤0,5W
Screen resolution [pixels] 1920 x 1080 1920 x 1090
50 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING
MATERIALS
Dispose of packaging material at a public waste disposal site.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES
The meaning of the symbol on the product, its accessory or packaging indicates
that this product shall not be treated as household waste. Please, dispose of
this product at your applicable collection point for the recycling of electrical &
electronic equipment waste. Alternatively in some states of the European Union
or other European states you may return your products to your local retailer
when buying an equivalent new product.
The correct disposal of this product will help save valuable natural resources
and help in preventing the potential negative impact on the environment and
human health, which could be caused as a result of improper liquidation of
waste. Please ask your local authorities or the nearest waste collection centre
for further details. The improper disposal of this type of waste may fall subject to
national regulations for fines.
For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the necessary
information from your seller or supplier.
Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information about
the correct disposal method from local government departments or from your
seller.
Hereby, FAST ČR a.s. declares that the radio equipment type SLE 42F16TCS/
SLE 43F16TCS is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address: www.sencor.eu
Changes to the text, design and technical specifications may occur without prior notice
and we reserve the right to make these changes.
EN 51
EN
Revision 11/2020Copyright © 2020, Fast ČR, a. s.
EN Warranty conditions
Warranty card is not a part of the device packaging.
This product is warranted for the period of 24 months from the date of purchase to the end-user. Warranty
is limited to the following conditions. Warranty is referred only to the customer goods using for common
domestic use. The claim for service can be applied either at dealer’s shop where the product was bought, or
at below mentioned authorized service shops. The end-user is obligated to set up a claim immediately when
the defects appeared but only till the end of warranty period. The end user is obligated to cooperate to certify
the claiming defects. Only completed and clean (according to hygienic standards) product will be accepted.
In case of eligible warranty claim the warranty period will be prolonged by the period from the date of claim
application till the date of taking over the product by end-user, or the date the end-user is obligated to take it
over. To obtain the service under this warranty, end-user is obligated to certify his claim with duly completed
following documents: receipt, certificate of warranty, certificate of installation.
This warranty is void especially if apply as follows:
• Defects which were put on sale.
• Wear-out or damage caused by common use.
• The product was damaged by unprofessional or wrong installation, used in contrary to the applicable
instruction manual, used in contrary to legal enactment and common process of use or used for another
purpose which has been designed for.
• The product was damaged by uncared-for or insufficient maintenance.
• The product was damaged by dirt, accident of force majeure (natural disaster, fire, and flood).
• Defects on functionality caused by low duality of signal, electromagnetic field interference etc.
• The product was mechanically damaged (e.g. broken button, fall).
• Damage caused by use of unsuitable media, fillings, expendable supplies (batteries) or by unsuitable
working conditions (e.g. high temperatures, high humidity, quakes).
• Repair, modification or other failure action to the product by unauthorized person.
• End-user did not prove enough his right to claim (time and place of purchase).
• Data on presented documents differs from data on products.
• Cases when the claiming product cannot be indentified according to the presented documents (e.g. the
serial number or the warranty seal has been damaged).
Authorized service centers
Visit www.sencor.eu for detailed information about authorized service centers.
… 25 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SLE 42F16TCS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SLE 42F16TCS in de taal/talen: Engels als bijlage per email.

De handleiding is 2,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Sencor SLE 42F16TCS

Sencor SLE 42F16TCS Gebruiksaanwijzing - Polski - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info