758820

Sencor SJE 5050 Handleiding

6
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
02/2017
- 6 - Copyright © 2017, Fast ČR, a.s.
EN Juicer
User’smanual
Prior to using this appliance, please read the user'smanual thoroughly, even in cases
where you have previously familiarised yourself with the operation of similar types
of appliances. Only use the appliance in the manner described in this user'smanual.
Keep this user'smanual in asafe place where it can be easily retrieved for future
reference.
We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor and warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
DESCRIPTION OF THE JUICER
A1 Pusher
A2 Feed tube
A3 Lid
A4 Titanium strainer
A5 Juice collector
A6 Locking arm
A7 Base unit
A8 0/Iswitch
A9 LCD speed indicator
A10 Control button
A11 Juice jug
A12 Spout with DripStop technology
A12a, which serves to prevent
dripping after extraction
A13 Pulp container
LCD SPEED INDICATOR
Level 1 – SOFT FRUIT: soft fruit
Level 2 – CITRUS: citrus fruits
Level 3 – PINEAPPLE: pineapple and fruits of similar hardness
Level 4 – APPLE: apples
Level 5 – HARD VEG: harder vegetables
BEFORE FIRST USE
1. Remove all packaging materials from the appliance and its accessories.
2. Thoroughly wash all removable parts (pusher A1, lid A3, titanium strainer A4,
juice collector A5, the juice jug A11 and pulp container A13) that come into
contact with food in warm water using kitchen detergent. Then rinse all these
parts under clean running water and thoroughly wipe dry with a ne wiping
cloth.
3. The pusher A1, titanium strainer A4 and the pulp container A13 may be washed
in adishwasher. We recommend washing the titanium strainer A4 in the top rack
of the dishwasher.
Attention:
The blade at the bottom of the titanium strainer A4 is very sharp and so
it is necessary to be especially careful when handling it. Careless handling
may lead to injury.
ASSEMBLING THE JUICER
1. Place the juicer on an even, dry surface, e.g. on awork table. Prior to assembly,
always check that the juicer is turned o (switch 0/IA8 is in position 0 – turned
o) and the power cord is disconnected from the power source.
2. Insert the juice collector A5 into the juicer – base unit A7 as shown in the picture.
Make sure that the juice collector spout A12 is located in the groove in the base
unit. Place the DripStop A12a on to the spout A12.
3. Insert the titanium strainer A4 into the juice collector A5. Make sure that the
strainer is properly seated on the drive shaft.
4. Tilt the pulp container A13 with its upper edge towards the base unit A7 and
slide it from underneath on to the rim of the juice collector. Then push the
bottom of the pulp container towards the base unit. When correctly seated,
there should be aspace of no more than 1 mm between the pulp container A13
and the base unit.
5. Cover everything with the lid A3 and push it down into the correct position.
6. Use one hand to push the lid A3 downwards and at the same time tilt the locking
arm A6 on to it so that the lid is secured in the correct position. An audible click
will be heard. The juicer is equipped with asafety mechanism that prevents it
from being started unless the lid is correctly seated and secured in place with
the locking arm.
7. Place the juice jug A11 underneath the spout A12.
8. Insert the pusher A1 into the feed tube A2 hole. Notice, that to make movement
easier, the pusher A1 has grooves that slide over the tabs in the top part of the
feed tube A2.
9. The juicer is now assembled and ready for use.
USING THE JUICER
1. Make sure that the juicer is correctly assembled and then connect it to the el.
power socket. The juicer is equipped with asafety mechanism that prevents it
from being started unless it is correctly assembled.
2. Place the juice jug A11, aglass or another suitable container below the juice
spout A12. Check that the pulp container A6 is installed in its place. Check
the DripStop A12a, it should be turned to the right to enable the juice to ow
through from underneath.
3. Prepare ingredients suitable for juicing (fruit and vegetables). Thoroughly
wash them and cut them up into pieces that will pass through the feed tube
A2. Remove hard stones that are contained in, for example, apricots, peaches,
mangoes, etc. and inedible peels, e.g. from oranges, pineapples, melons,
mandarins, etc.
4. Prior to starting the juicer, make sure that the lid A3 is properly secured in the
correct position. Using the control button A10, set the required level depending
on the hardness of the ingredients. The juicer can be set from the lowest level 1
(which is intended for soft ingredients, e.g. bilberries, water melon, tomatoes) to
the highest level 5 (which is intended for hard ingredients, e.g. celery, beetroot,
etc.).
5. Turn on the juicer (set the 0/Iswitch A8 to position I– on). The level 1–5 can be
set during the juicing process depending on the hardness of the ingredients.
Take the pusher A1 out of the feed tube A2. Gradually add the prepared
ingredients into the feed tube A2 and push them down using the pusher. You
will achieve optimal results if you ll the feed tube A2 gradually and push the
ingredients down gently.
Attention:
Do not use ngers or other utensils to push ingredients through the feed
tube A2. Always use the pusher A1 designed for this purpose.
The maximum time of non-stop operation of this appliance is 15 minutes.
Then allow it to cool down for 10 minutes.
When juicing larger batches of ingredients, do not run the appliance non-
stop for longer than 10 seconds.
6. If the juice jug A11 or pulp container A13 ll up during the juicing process,
turn the juicer o by setting the 0/Iswitch A8 to position 0 – o, empty out the
respective container and then put it back in its place. Then you can put the juicer
back into operation and continue juicing.
7. To turn o the juicer, set the 0/Iswitch A8 to position 0 – o. Then disconnect the
juicer from the power socket. Allow the juice to ow out, then turn the DripStop
A12a to the left to prevent dripping.
8. When you have nished using the juicer, disassemble it according to the
instructions contained in chapter Disassembling the juicer and clean it out
according to the instructions contained in chapter Cleaning and maintenance.
Before disassembling the juicer, make sure that the juicer is turned o (0/Iswitch
A8 is in position 0 – o), disconnected from the power socket and that the
rotating parts have stopped.
USEFUL ADVICE AND TIPS
■ Before you start juicing, thoroughly wash all the ingredients and cut them up
into smaller pieces that will pass through the feed tube A2. Remove hard stones
that are contained in, for example, apricots, peaches, mangoes, etc. and inedible
peels, e.g. from oranges, pineapples, melons, mandarins, etc.
■ To achieve optimal results, always process only fresh ripened fruits and
vegetables. Overripe or unripe fruits and vegetables will negatively aect the
resulting taste of the juice.
■ If you juice fruits and vegetables of varying consistency, we recommend that
you start with the softer fruits and vegetables, e.g. citruses, berries, etc. and then
proceed on with harder fruits, e.g. apples. Always select aspeed appropriate for
the type of ingredients that are being juiced.
■ Do not use the juicer for processing frozen or excessively hard ingredients, e.g.
sugar cane.
■ Place the ingredients into the feed tube A2 gradually and push through gently
with mild pressure. Do not overll the feed tube A2 and do not push the
ingredients in too quickly and with excessive pressure. The process separating
the juice from the pulp occurs gradually and will not be sped up by pushing
ingredients in quickly.
■ To prevent freshly pressed apple juice from turning brown, you can add alittle
lemon juice.
■ To prevent losing valuable minerals, we recommended consuming the juice
immediately after it is pressed.
DISASSEMBLING THE JUICER
1. Check that you have turned o the juicer by setting the 0/I switch A8 to
position 0 – o and disconnected the power cord from the power source. Wait
until rotating parts come to acomplete stop before disassembly. Wait until the
juice ows out and turn the DripStop A12a to the left to prevent the juice from
dripping.
2. Release the locking arm A6 from the lid and tilt it downwards.
3. Remove the lid A3 and take out the pulp container A13 by tilting the bottom
away from the base unit. Then slide the pulp container from underneath the rim
of the juice collector A5.
4. Take out the juice collector A5 with the titanium strainer A4 still inside it by
pulling it upwards away from the base unit A7.
5. Take the titanium strainer A4 out of the juice collector A5. We recommend that
the strainer A4 is removed over akitchen sink.
Attention:
There is ablade in the middle part of the strainer A4. Be especially careful
to avoid injury when handling the strainer A4. Do not touch the blade.
CLEANING AND MAINTENANCE
■ Make sure that the juicer is turned o (the 0/Iswitch is in position 0 – o), the
power cord is disconnected from the power source and that rotating parts have
stopped.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SJE 5050 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SJE 5050 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sencor SJE 5050

Sencor SJE 5050 Gebruiksaanwijzing - Nederlands - 7 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info