758398

Sencor SFS 3050 Handleiding

5
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
- 5 - 05/2020
Copyright © 2020, Fast ČR, a.s.
EN Electric Food Slicer
User'smanual
■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’smanual.
Keep this user'smanual in asafe place where it can be easily retrieved for future use.
In the event that you hand this appliance over to somebody else, make sure to also
include this user'smanual.
■ Carefully unpack the appliance and take care not to throw away any part of
the packaging before you find all its parts. We recommend saving the original
cardboard box, packaging material, purchase receipt and responsibility statement
of the vendor or warranty card for at least the duration of the legal liability
for unsatisfactory performance or quality. In the event of transportation, we
recommend that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Adjustable back plate
A2 Food carriage with thumb guard
A3 Top plate with groove
A4 Base unit
A5 Fixed back plate
A6 Cutting disc
Stainless steel design, cutting disc
diameter 170 mm, removable
A7 Cutting disc central fastener
A8 Food pusher
It is fitted with grip pins to prevent
the food from accidentally slipping
while slicing.
It can be removed from the slicer
when slicing larger pieces of food or
for cleaning purposes
A9 On/Off switch
The switch has three positions:
O– Off.
I– Manual operation. The cutting
disc will rotate while the switch is
pushed down in this position. The
cutting disc will stop when the
switch is released.
II – Continuous operation. The
cutting disc will start rotating and
will run continuously until the
switch is set to position O.
A10 Motor unit
A11 Cutting thickness adjustment knob
Enables variable slicing thickness
adjustment 0-23 mm.
A12 Removable tray
A13 Thickness adjustment knob symbol
for required thickness
A14 Suction cups
BEFORE FIRST USE
■ Before first use, remove all packaging materials including promotion stickers and
labels from the food slicer.
■ Wash the removable parts that come into contact with food (removed cutting disc
A6, food carriage A2, food pusher A8 and removable tray A12) in warm water using
kitchen detergent. Then thoroughly rinse these parts under flowing water and dry
thoroughly with awiping cloth.
■ Using adry or lightly dampened cloth, also clean the outer parts of the appliance
and then wipe it dry. Never submerge the base motor unit in water or any other
liquid!
Attention:
Be careful when handling the cutting disc to prevent injury caused
by the blade.
ASSEMBLY
■ Place the food slicer on an even, dry and stable surface, e.g. on akitchen countertop.
■ Attach the cutting disc to the base motor unit by turning the central fastener A7
fully anticlockwise.
Attention:
When handling the cutting disc use the central fastener. To avoid
injury, do not touch the blade.
■ Place the food carriage on to the top plate with groove and put the food pusher on
to the food carriage.
■ Insert the tray into the bottom part of the base unit. To catch the falling slices of
food, aplate or tray or food-grade foil can be placed on the tray.
OPERATION
Attention:
The slicer is intended for slicing bread, baked goods, smoked
goods, meats, cheeses, vegetables and fruits. Do not use it
for slicing hard baked goods, frozen food, food in plastic or
aluminium foils, meat with bones, fruit with hard stones, etc.
■ Turn the adjustment knob A11 to set the desired slicing thickness. If intending to
slice thin slices or to slice sticky food (e.g. cheeses), it is recommended to slightly
wet the cutting disc.
■ Connect the power cord to an el. power socket.
Attention:
Before connecting the power cord to an electrical power socket,
check that the cutting disc is properly attached to the motor unit.
■ Move the food carriage to the left side of the top plate of the base unit. Place the
food on to the food carriage and push it sideways using the food pusher.
■ Turn the food slicer on with your left hand. The motor unit will start and the cutting
disc will start to rotate.
■ Use your right hand to hold the food carriage and slice the inserted food by moving
towards and away from the cutting disc. Exert aslight pressure on the food while
slicing it to ensure that the food slices are of the same thickness.
Attention:
The slicer can be used with the food carriage without the food
pusher or the entire food carriage can be completely removed.
In both cases it is always necessary to pay increased attention to
avoid injury to the hand or fingers!
■ When you have finished slicing, turn off the slicer and wait until the cutting disc
comes to acomplete stop. Only then may you remove the sliced food from the tray
or any remaining pieces of unsliced food from the food carriage.
Attention:
The slicer is designed for short operation lasting no longer than
5minutes. After this time has elapsed, turn the slicer off and allow
the motor unit to cool down.
Note:
If food sticks to the cutting disc, turn off the food slicer and disconnect
it from the power socket. Clean the cutting disc using aplastic spatula.
Proceed in the same way if any food jams during slicing.
Some food may cause discolouration of plastics. However, this does not
have any effect on the functionality of the food slicer.
■ When you have finished using the slicer, disconnect it from the power socket. Clean
out the slicer according to the instructions in chapter Cleaning and maintenance.
CLEANING AND MAINTENANCE
■ Before cleaning the appliance, always turn it off and disconnect it from the power
socket. Using the adjustment knob, set the adjustable back plate to position 0mm,
i.e. set it to symbol on the adjustment knob A13 on the rear side of the adjustable
back plate.
■ After each use, remove any food remains from the food slicer. Clean parts that
come into contact with food using awiping cloth dipped in clean water and then
dry with awiping cloth. For amore thorough clean, remove the cutting disc, food
carriage, food pusher and removable plate, and wash these parts in warm water
using kitchen detergent. Then thoroughly rinse under flowing water and dry them.
Note:
Remove the cutting disc by turning the central fastener clockwise and
take it off the motor unit.
Attention:
Pay extra attention when handling the cutting disc. To avoid
injury, do not touch the blade.
■ Using adry or lightly dampened cloth, also clean the outer parts of the appliance
and then wipe it dry. Never submerge the base motor unit in water or any other
liquid!
Attention:
For cleaning, do not use thinners, solvents or cleaning agents that
cause abrasion.
STORAGE
■ When not using the food slicer, store it in adry place out of children'sreach.
Attention:
Keep the stored food slicer away from extreme temperatures,
direct sunlight and excessive humidity and do not store it in an
overly dusty environment. Do not place any heavy items on the
stored food slicer.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SFS 3050 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SFS 3050 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info