759906
8
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
EN-8
EN
Pedestal Fan
SFN 4040SL
2019 12/2019
DESCRIPTION OF THE APPLIANCE
A1 Protective grille (consists of two parts: front and rear)
A2 Fan blades with adiameter of 40 cm
A3 Motor unit
A4 Horizontal oscillation toggle switch
A5 Speed selector 0 - o, 1 - low speed, 2 - medium speed, 3 - high speed
A6 Screw for attaching the motor unit to the pole
A7 Fan head tilt angle adjustment screw
A8 Extensible pole
A9 Pole extension lock
A10 Base
Note:
The accessories include ascrew and anut for joining the protective grills.
BEFORE FIRST USE
■ Take the appliance and its accessories out of the packaging materials. Before disposing of the packaging materials,
make sure that no part of the appliance is missing.
ASSEMBLING AND DISASSEMBLING THE APPLIANCE
■ Before assembling or disassembling the appliance, make sure that it is turned o and disconnected from the
power socket.
■ Remove the nut from the underside of the extensible pole A8. Seat the extensible pole A8 on the base A10 so that
the opening of the extensible pole A8 is aligned with the hole in the base A10. Secure the extensible pole A8 in
place using the nut. Check that it is correctly tightened.
■ Remove the four screws A3 from the motor unit. Place the rear part of the protective grille A1 on to the motor unit
A3 so that the holes in the motor unit A3 are aligned with the holes in the protective grille A1. Secure the rear part
of the protective grille A1 using the screws.
■ Place the fan blades A2 on to the shaft of the motor unit A3 and rmly tighten the screws.
■ Now attach the front part of the protective grille A1 and fasten both parts together using the metal clamps and
asmall screw, which is apart of the grille assembly.
■ Place the motor unit A3 with the attached fan head on the extensible pole A8 and secure the fan head using the
screw A6.
■ Before putting the fan into operation, check that it is correctly assembled and that the protective grills are rmly
joined.
■ To disassemble, proceed in reverse sequence.
OPERATING THE APPLIANCE
Setting the speed and turning o the fan
Place the fan on an even, dry and smooth surface within reach of apower socket. Connect the power cord to
apower socket. To set the air ow speed, use the speed selector A5.
0 – turn o the fan;
1– set alow air ow speed;
2 – set amedium air ow speed;
3– set ahigh air ow speed.
When you have nished using the fan, always turn it o and disconnect it from the power socket.
Setting horizontal oscillation
■ The horizontal oscillation of the motor unit A3 can be set using the toggle switch A4. To start the horizontal
oscillation, push the toggle switch A4 down. The motor unit A3 will oscillate from side to side at an angle of
approximately 90°.
■ To turn o the oscillation, pull the toggle switch A4 up. This will turn o the oscillation.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SFN 4040 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SFN 4040 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info