759178
10
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
- 10 - 09/2020
Copyright © 2020, Fast ČR, a.s.
EN Dehumidifier
User'smanual
Prior to using this appliance, please read the user'smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’smanual.
Keep this user'smanual in asafe place where it can be easily retrieved for future use.
We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Control panel
A2 Handles (on both sides)
A3 Air outlet grille
A4 Condensate tank
A5 Viewing window
A6 Drain hose connection outlet
A7 Travel wheels
A8 Air inlet grille
A9 Air filter (located behind agrille)
A10 Power cord holder (used only for
storage)
DESCRIPTION OF THE CONTROL PANEL
B1 On/Off button
B2 MODE button (for selecting an
operating mode)
B3 Plus (+) button
B4 Minus (-) button
B5 FAN button (fan speed control)
B6 TIMER button (timer control)
B7 Timer indicator light
B8 Low fan speed indicator lights
B9 Medium fan speed indicator lights
B10 Display
B11 Full condensate tank indicator light
B12 Drying mode indicator light
B13 Continuous dehumidification mode
indicator light
B14 Smart dehumidification mode
indicator light
B15 Power On indicator light
BEFORE FIRST USE
Before first use, take the appliance and its accessories out of the packaging material
and remove all promotional labels and stickers. Check that neither the appliance nor
any of its parts is damaged.
Note:
Travel wheels A7 may be removed on certain models. Screw the travel
wheels to the underside of the appliance prior to using it.
Do not travel over carpets, thresholds or other obstacles with the
wheels. This could damage them.
Do not move the appliance when the condensate tank is full.
Certain models may also be supplied without travel wheels A7.
Installing the power cord holder
When planning on not using the appliance and preparing to store it, install the
holder that serves to conveniently store the power cord.
Insert the holder into the cut-out at the rear of the appliance.
INSTALLATION LOCATION OF THE APPLIANCE
Locate the appliance on an even, dry and stable surface within reach of aproperly
grounded power socket.
Do not use the appliance outdoors.
To ensure sufficient air circulation, leave at least 20 cm of free space around the sides
of the appliance.
Locate the appliance in a room where temperature does not fall below 5 °C. If
the temperature were to fall below 5°C, there is arisk of frost forming inside the
appliance, which would reduce its efficiency.
Do not locate the appliance in the vicinity of dryers, heating devices and other
sources of heat.
Use the appliance in locations where humidity could damage books or other
valuable items.
The appliance must be used in a closed room in order to ensure its maximum
effectiveness. Therefore, close the doors and windows of the given room.
OPERATING THE APPLIANCE
The dehumidifier is used for drying out, for example, flooded basements, rooms
with an increased level of moisture, etc. Do not use it in areas where substances or
items are stored requiring precise room temperature and humidity control.
If using the appliance for the first time, it is important to allow it to run continuously
for 24 hours.
Use the appliance at an ambient temperature in the range 5°C–32°C(41°F–90°F)
and humidity in the range 30%-80%.
Always wait at least 3 minutes before turning the appliance on again.
Do not connect the appliance to a power socket to which another appliance is
already connected. We recommend connecting the appliance to an independent
circuit.
Make sure that the condensate tank is correctly installed in the appliance, otherwise
the appliance may not function correctly.
OPERATING THE APPLIANCE
Make sure that the appliance is located in asuitable place and that it is correctly
assembled. Then insert the power plug into apower socket.
Turning on / off
Press button B1 to turn on the appliance. Indicator light B15 will turn on. In order to
turn off the appliance, press button B1 again.
Note:
When the appliance is turned on or off, the compressor may make
anoise. This is normal.
The appliance will turn off automatically if the condensate tank A4 is full or
incorrectly installed.
If you turn the appliance off and then need to turn it on again quickly thereafter, the
appliance will start again after approximately 3minutes. This function protects the
compressor against damage.
The appliance is equipped with an automatic restart function (AUTO-RESTART)
for the event of apower outage. Settings will remain stored in the memory of the
appliance, and after power is restored, the appliance will automatically start in the
previously set mode.
When you have finished using it, turn off the appliance and disconnect the power
cord from the power socket.
Display
Depending on the selected mode, the display A10 shows: set humidity in %,
automatic start / shut-off time, current humidity in % (+/- 5% in the range 30%
- 90% relative humidity).
Selecting an operating mode
To select an operating mode, use button MODE B2. Repeatedly press this
button to select from the following modes: dehumidification, drying, continuous
dehumidification or smart dehumidification.
Dehumidification mode: in this mode, set the required humidity using the +/-
buttons. No indicator light will be lit.
Drying mode: indicator light B12 will be lit when the drying mode is activated. In
this mode, fan speed is automatically set to high and it is not possible to change it.
It thereby ensures maximum effectiveness. It is important that this mode is used
in aclosed room. Check that no windows or doors are open. To ensure maximum
effectiveness, spin dry the laundry in awashing machine. Point the appliance so that
the air outlet is directed at the laundry from adistance of 30 – 50 cm. Drying results
on thick and heavy laundry may not always be satisfactory.
Warning:
Do not cover the air outlet with laundry. There is arisk of the
appliance overheating, afire hazards or damage to the unit. Do
not place wet laundry above the appliance or allow water to drip
from the laundry on to the appliance. There is arisk of injury by
electrical shock, potential to electrical wiring or damage to the
appliance.
Continuous dehumidification mode: indicator light B13 will be lit when the
continuous dehumidification mode is activated. In this mode, the appliance runs
continuously until the condensate tank A4 is completely full of condensate.
Smart dehumidification mode: indicator light B14 will be lit when the smart
dehumidification mode is activated. In this mode, the appliance automatically
detects the humidity in the room and maintains it in the optimal range of 45%
-55% depending on room temperature. In this mode it is not possible to set the
humidity.
Setting the humidity
Use buttons +/- to set the required humidity in the range 35% - 85% RH (relative
humidity). Each time abutton is pressed, the value will increase or decrease by 5%.
The set humidity will be shown on the display B10.
Setting fan speed
Button FAN B5 serves to set the fan speed: low (indicator light B8 will be
lit)–medium (indicator light B9 will be lit) – high (both indicator lights B8 andB9
will be lit).
For maximum dehumidification speed, set the fan to the high speed. If you need the
fan to be more quiet or if humidity has declined, set the medium or slow fan speed.
Setting an automatic start
While the appliance is turned off, press the TIMER B6 button. Use buttons +/- to
set the time after which the appliance will turn on automatically. You can set atime
from 30 minutes to 24 hours, initially in 30-minute increments (up to 10 hours) and
then in 1-hour increments.
The set time is automatically saved to memory after approximately 5 seconds.
Automatic shut-off function
While the appliance is turned on, press the TIMER B6 button. Use buttons +/- to
set the time after which the appliance will turn off automatically. You can set atime
from 30 minutes to 24 hours, initially in 30-minute increments (up to 10hours) and
then in 1-hour increments.
The set time is automatically saved to memory after approximately 5seconds and
the display B10 will show the set humidity.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SDH 2020 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SDH 2020 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info