758903
6
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
- 6 - 05/2020 Copyright © 2020, Fast ČR, a.s.
Heed the correct order for the addition of ingredients into the baking container A3, as described in chapter "Using the breadmaker". Yeast
must not come into contact with liquids prior to aprogram being started.
The delayed start function cannot be selected in the "JAM" and "BAKE" programs.
Note:
The timer can be set to amaximum time of 13hours.
KEEP WARM function
When the program is finished, the breadmaker will automatically switch to the KEEP WARM mode for 60 minutes. If you wish to take the
bread out of the breadmaker immediately after it has finished baking, cancel this function by pressing the START/STOP button B5.
This function is not available for the DOUGH and JAM programs.
Memory function
In the event of ashort power outage (up to 10minutes), the breadmaker will automatically restart in the set program without the need to
press the "START/STOP" button B5 once power is restored.
In the event that the power outage is longer than 10minutes, the paused program will not be automatically resumed. If, however, the rising
phase has not yet commenced, you may start the program from the beginning. If the rising phase has already commenced, it is necessary
to start again with new ingredients.
Warning messages on the display
1. If the text "HHH" appears on the display B1 accompanied by asound signal when the program is started, it means that the temperature
inside the breadmaker is too high. This may occur when you attempt to use the breadmaker immediately after baking aloaf. Open the
lid A2 and allow the breadmaker to cool down for 10 to 20minutes. Once it has cooled down, you may use the breadmaker again.
2.
If the text "LLL" appears on the display B1 accompanied by asound signal when the program is started, it means that the temperature inside the
breadmaker is too low. Open the lid A2 and place the breadmaker into room temperature. The recommended room temperature is 15°Cto 34°C.
3. If the texts "EE0" or "EE1" appear on the display B1, please contact an authorised service centre.
OVERVIEW OF THE PROGRAMS:
1 – BASIC (basic bread types)
This program consists of the kneading, rising and baking phases. It is used for baking standard types of bread from white wheat flour that
may be flavoured using various ingredients such as herbs, etc.
2 – FRENCH (French style bread)
This program consists of the kneading, rising and baking phases, whilst the rising phase is longer than on the basic program. It is used for
baking traditional French white bread with afluffy centre and crispy crust. We recommend consuming French style bread on the same
day that it is baked.
3 – WHOLE WHEAT (wholemeal bread)
This program consists of the kneading, rising and baking phases. It is used to bake bread from wholemeal flour. Wholemeal flour should form
at least one half of the amount of flour. Wholemeal bread is nutritionally more valuable than bread from plain bread flour since wholemeal
flour contains the whole grain, including the bran and kernel. Whole wheat bread has adark crust with adark bread centre.
Note:
We do not recommend using the delayed start function with this program. Otherwise, the bread quality may be negatively affected.
4 – QUICK (quick baking)
This program consists of the kneading, rising and baking phases. This is afaster alternative to program no. 1 – BASIC. Abread baked in this
way has aless fluffy centre than abread baked with the basic program no. 1.
5 – SWEET (sweet bread)
This program consists of the kneading, rising and baking phases. It is used for baking sweet bread with ahigher fat and sugar content, and
with the addition of dried fruit, nuts, chocolate flakes, candied orange peel, etc.
6 – ULTRA-FAST
Kneading, rising and baking bread as quickly as possible. Usually this bread is less fluffy than the bread baked using program no. 4 – QUICK.
7 – GLUTEN-FREE
This program consists of the kneading, rising and baking phases. Dough rises only in asingle phase and the baking time is longer due to
its higher moisture component.
8 – DOUGH
This program is used for mixing and kneading ingredients and allowing the dough to rise, e.g. for pizza, bread rolls, etc. It does not include
the baking phase.
9 – JAM
This program is used for making fruit marmalades and jams. Cook the marmalades and jams in smaller batches as they increase in volume
while being cooked. Jam is sticky and is very difficult to remove if it escapes out of the baking container.
10 – CAKE
This program consists of the kneading, rising and baking phases. It is used for baking cakes and sweet baked goods prepared from dough
containing baking powder or sodium bicarbonate.
11 – SANDWICH (toast bread)
This program consists of the kneading, rising and baking phases. It is used for baking afluffy toast bread with athin crust.
12 – BAKE
This program includes only the baking phase and makes your breadmaker into asmall oven. Buttons + and – can be used to set the baking
time in the range from 10 to 60 minutes. It is used for baking ready-made dough from the store or for additional baking of abread that has
just finished baking if you feel that its crust is too light.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SBR 0770 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SBR 0770 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info