51
Change degree of measurement for temperature
The temperature can only be displayed in either °C or in °F on the base sensor and
radio sensor.
Base unit
X Keep the MIN/MAX button pressed for approx. 2 seconds, in order to change the
displayed unit of measurement.
Radio sensor
1. Open the battery panel on the back.
2. Press the C/F button 1x.
Reset weather station
If obviously incorrect values are being displayed, you should reset the weather station
to its factory settings.
1. Remove the batteries from the weather station and reinsert them. If you operate
the device from the mains supply, pull the mains adaptor out of the socket and
then reconnect it. If batteries are in the device, these also have to be removed
briefly and then reinserted.
Once the base station is again supplied with electricity, all displays can be seen for
a moment. The display will also be lit briefly and you will hear a beep.
UK Funkwetterstation.book Seite 51 Freitag, 13. Juni 2014 1:47 13