757344
7
Verklein
Vergroot
Pagina terug
1/17
Pagina verder
Tips for more accurate time setting
Take notice of the following points in order to set the time more accurately.
Before setting the time, wind the mainspring until the power reserve indicator shows a full-wound state.
When using a watch after it has stopped, wait approximately 30 seconds after the seconds hand starts
moving, and then pull the crown out to the second click.
Do not stop the seconds hand with the crown being at the second click position for thirty minutes or
longer. If the time the crown has been at the second click position and the seconds hand has been
stopped exceeds 30 minutes, push the crown back in to its original position, and let the seconds hand
move for 30 seconds or longer, then restart the time setting.
EN 20
3
5R65 (A model without a 24-hour hand)
Date adjustment at the end of the month
It is necessary to adjust the date at the end of February and 30-day months.
Ex.) To adjust the date in the A.M. period on the first day of a month following a 30-day month
The watch displays “31” instead of “1.” Pull out the crown to the first click.
Turn the crown counterclockwise to set the date to “1” and then push the crown back in to the normal
position.
* For models with screw down crown, please be sure to lock the crown after operating it.
Pull out the crown to the first
click
bCAUTION
Avoid amending the date when the watch is displaying between 9 PM and 1 AM. Doing
so may cause damage.
EN 21
3
5R65 (A model without a 24-hour hand)
How to set the time and date
How to set the time and date
To set both time and date, set the 24-hour hand and minute hand first, and then set the date and
the hour hand.
* To adjust the date only on a day such as the next day after the completion of a month that has less than 31 days
(February, April, June, September and November), please refer to “Date adjustment at the end of the month”
→ P. 26.
First, set the 24-hour hand and the minute hand.
1Make sure that the watch is working.
* To carry out the procedure, please make sure that the watch is in working state. Please wind the mainspring
when the watch is not working. “How to wind the mainspring by using crown (Hand winding)” → P. 14
Pull out the crown to
the second click when
the seconds hand is
pointing at the 0
second position.
2Pull out the crown to the second click
when the seconds hand is pointing at
the 0 second position. The seconds
hand stops moving.
* For models with screw down crown, please unlock the
crown before operating it.
EN 22
4
5R66 (A model with a 24-hour hand)
Set it in such a way that
the 24-hour hand and
the minute hand
advance clockwise
3For advancing the hands clockwise,
turn the crown in the direction of the
arrow and set the time of the 24-hour
hand and the minute hand.
From about 10 minutes before the desired time,
slowly advance and set the 24-hour hand and the
minute hand.
* As the hour hand moves together, it may point to a
different time from the one you wish to set, or the date
may change. Please set the minute hand and the 24-
hour hand first.
4Push the crown back in to the normal
position.
Thereby, the 24-hour hand, the minute hand and
the seconds hand will be in alignment.
* Time signal service is useful for second setting.
EN 23
4
5R66 (A model with a 24-hour hand)
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Seiko 5R66 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Seiko 5R66 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info