109Lights and visibility
Note
●Do not put stickers on the windscreen in front of the rain sensor. This
may cause sensor disruption or faults.
Rear window wiper
The window wiper lever operates the windscreen wiper and
the wash and wipe system for the rear window.
Fig. 66 Windscreen wip-
er and windscreen wash
lever: rear window wiper
Switching on the interval wipe
–Press the lever forwards to position 6 ⇒ Fig. 66. The wiper will
wipe the window approximately every 6 seconds.
Switching off the interval wipe function
–Pull the lever back from position 6 towards the steering wheel.
The wiper will continue to function for a short period if you
switch off whilst the wipers are in motion.
Switching on the windscreen wiper and washer system
–Press the lever fully forwards to position 7 ⇒ Fig. 66. The rear
wiper and washer operate at the same time. The windscreen
wash system will function as long as you hold the lever in this
position.
–Release the lever. The washer system stops and the wipers con-
tinue until the end of the cycle.
–Move the lever towards the steering wheel to switch off.
WARNING
●A worn or dirty wiper blade will obstruct visibility and reduce safety.
●Always note the corresponding warnings on ⇒ page 205.
CAUTION
In icy conditions, always check that the wiper blade is not frozen to the
glass before using the wiper for the first time. If you switch on the wiper
when the wiper blade is frozen to the glass, this could damage both the
wiper blade and the wiper motor.
Note
●The rear window wiper will only work when the ignition is switched on.
●Depending on the version of the model, when you engage reverse gear
and with the headlight wiper activated, the lamps are wiped.
Safety First Operating Instructions Practical Tips Technical Specifications